diff options
Diffstat (limited to 'docs/configuration/interfaces')
| -rw-r--r-- | docs/configuration/interfaces/bridge.rst | 47 |
1 files changed, 28 insertions, 19 deletions
diff --git a/docs/configuration/interfaces/bridge.rst b/docs/configuration/interfaces/bridge.rst index ddc293cc..e69a6e26 100644 --- a/docs/configuration/interfaces/bridge.rst +++ b/docs/configuration/interfaces/bridge.rst @@ -127,15 +127,24 @@ Enable VLAN-Aware Bridge .. cfgcmd:: set interfaces bridge <interface> enable-vlan - To activate the VLAN aware bridge, you must activate this setting to use VLAN + To activate the VLAN aware bridge, you must activate this setting to use VLAN settings for the bridge +.. cfgcmd:: set interfaces bridge <interface> protocol <802.1ad|802.1q> + + Define used ethertype of bridge interface. + + Ethertype ``0x8100`` is used for ``802.1q`` and ethertype ``0x88a8`` is used + for ``802.1ad``. + + The default is ``802.1q``. + VLAN Options ------------ .. note:: It is not valid to use the `vif 1` option for VLAN aware bridges - because VLAN aware bridges assume that all unlabeled packets belong to - the default VLAN 1 member and that the VLAN ID of the bridge's parent + because VLAN aware bridges assume that all unlabeled packets belong to + the default VLAN 1 member and that the VLAN ID of the bridge's parent interface is always 1 .. cmdinclude:: /_include/interface-vlan-8021q.txt @@ -149,9 +158,9 @@ VLAN Options VLAN tag enters the port, the data packet will be forced to add a tag of a specific vlan id. When the vlan id flag flows out, the tag of the vlan id will be stripped - + Example: Set `eth0` member port to be native VLAN 2 - + .. code-block:: none set interfaces bridge br1 member interface eth0 native-vlan 2 @@ -162,17 +171,17 @@ VLAN Options Allows specific VLAN IDs to pass through the bridge member interface. This can either be an individual VLAN id or a range of VLAN ids delimited by a hyphen. - + Example: Set `eth0` member port to be allowed VLAN 4 - + .. code-block:: none - + set interfaces bridge br1 member interface eth0 allowed-vlan 4 - + Example: Set `eth0` member port to be allowed VLAN 6-8 - + .. code-block:: none - + set interfaces bridge br1 member interface eth0 allowed-vlan 6-8 Port Mirror (SPAN) @@ -265,17 +274,17 @@ This results in the active configuration: Using the operation mode command to view Bridge Information =========================================================== -.. opcmd:: show bridge +.. opcmd:: show bridge The `show bridge` operational command can be used to display configured bridges: .. code-block:: none - vyos@vyos:~$ show bridge - 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding - priority 32 cost 100 - 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding + vyos@vyos:~$ show bridge + 3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding + priority 32 cost 100 + 4: eth2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 master br0 state forwarding priority 32 cost 100 .. opcmd:: show bridge <name> fdb @@ -304,11 +313,11 @@ Using the operation mode command to view Bridge Information 33:33:00:00:00:6a dev br0 self permanent 01:00:5e:00:00:01 dev br0 self permanent 33:33:ff:00:00:00 dev br0 self permanent - + .. opcmd:: show bridge <name> mdb - Show bridge `<name>` mdb displays the current multicast group membership - table.The table is populated by IGMP and MLD snooping in the bridge driver + Show bridge `<name>` mdb displays the current multicast group membership + table.The table is populated by IGMP and MLD snooping in the bridge driver automatically. .. code-block:: none |