diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/vpn/pptp.rst | 552 |
1 files changed, 526 insertions, 26 deletions
diff --git a/docs/configuration/vpn/pptp.rst b/docs/configuration/vpn/pptp.rst index fe536eec..2a5e7731 100644 --- a/docs/configuration/vpn/pptp.rst +++ b/docs/configuration/vpn/pptp.rst @@ -1,52 +1,552 @@ .. _pptp: +########### PPTP-Server ------------ +########### The Point-to-Point Tunneling Protocol (PPTP_) has been implemented in VyOS only for backwards compatibility. PPTP has many well known security issues and you should use one of the many other new VPN implementations. -As per default and if not otherwise defined, mschap-v2 is being used for -authentication and mppe 128-bit (stateless) for encryption. If no -gateway-address is set within the configuration, the lowest IP out of the /24 -client-ip-pool is being used. For instance, in the example below it would be -192.168.0.1. - -server example -^^^^^^^^^^^^^^ +*********************** +Configuring PPTP Server +*********************** .. code-block:: none + set vpn pptp remote-access authentication mode local set vpn pptp remote-access authentication local-users username test password 'test' - set vpn pptp remote-access authentication mode 'local' - set vpn pptp remote-access client-ip-pool PPTP-POOL range 192.168.0.10-192.168.0.15 + set vpn pptp remote-access client-ip-pool PPTP-POOL range 192.168.255.2-192.168.255.254 set vpn pptp remote-access default-pool 'PPTP-POOL' - set vpn pptp remote-access gateway-address '10.100.100.1' - set vpn pptp remote-access outside-address '10.1.1.120' + set vpn pptp remote-access outside-address 192.0.2.2 + set vpn pptp remote-access gateway-address 192.168.255.1 + + +.. cfgcmd:: set vpn pptp remote-access authentication mode <local | radius> + + Set authentication backend. The configured authentication backend is used + for all queries. + + * **radius**: All authentication queries are handled by a configured RADIUS + server. + * **local**: All authentication queries are handled locally. + * **noauth**: Authentication disabled. + +.. cfgcmd:: set vpn pptp remote-access authentication local-users username <user> password + <pass> + + Create `<user>` for local authentication on this system. The users password + will be set to `<pass>`. + +.. cfgcmd:: set vpn pptp remote-access client-ip-pool <POOL-NAME> range <x.x.x.x-x.x.x.x | x.x.x.x/x> + + Use this command to define the first IP address of a pool of + addresses to be given to PPTP clients. If notation ``x.x.x.x-x.x.x.x``, + it must be within a /24 subnet. If notation ``x.x.x.x/x`` is + used there is possibility to set host/netmask. + +.. cfgcmd:: set vpn pptp remote-access default-pool <POOL-NAME> + + Use this command to define default address pool name. + +.. cfgcmd:: set vpn pptp remote-access gateway-address <gateway> + + Specifies single `<gateway>` IP address to be used as local address of PPP + interfaces. + +********************************* +Configuring RADIUS authentication +********************************* + +To enable RADIUS based authentication, the authentication mode needs to be +changed within the configuration. Previous settings like the local users, still +exists within the configuration, however they are not used if the mode has been +changed from local to radius. Once changed back to local, it will use all local +accounts again. + +.. code-block:: none + + set vpn pptp remote-access authentication mode radius + +.. cfgcmd:: set vpn pptp remote-access authentication radius server <server> key <secret> + + Configure RADIUS `<server>` and its required shared `<secret>` for + communicating with the RADIUS server. + +Since the RADIUS server would be a single point of failure, multiple RADIUS +servers can be setup and will be used subsequentially. +For example: + +.. code-block:: none + + set vpn pptp remote-access authentication radius server 10.0.0.1 key 'foo' + set vpn pptp remote-access authentication radius server 10.0.0.2 key 'foo' + +.. note:: Some RADIUS severs use an access control list which allows or denies + queries, make sure to add your VyOS router to the allowed client list. + +RADIUS source address +===================== + +If you are using OSPF as IGP, always the closest interface connected to the +RADIUS server is used. You can bind all outgoing RADIUS requests +to a single source IP e.g. the loopback interface. + +.. cfgcmd:: set vpn pptp remote-access authentication radius source-address <address> + + Source IPv4 address used in all RADIUS server queires. + +.. note:: The ``source-address`` must be configured on one of VyOS interface. + Best practice would be a loopback or dummy interface. + +RADIUS advanced options +======================= + +.. cfgcmd:: set vpn pptp remote-access authentication radius server <server> port <port> + + Configure RADIUS `<server>` and its required port for authentication requests. + +.. cfgcmd:: set vpn pptp remote-access authentication radius server <server> fail-time <time> + + Mark RADIUS server as offline for this given `<time>` in seconds. + +.. cfgcmd:: set vpn pptp remote-access authentication radius server <server> disable + + Temporary disable this RADIUS server. + +.. cfgcmd:: set vpn pptp remote-access authentication radius acct-timeout <timeout> + + Timeout to wait reply for Interim-Update packets. (default 3 seconds) + +.. cfgcmd:: set vpn pptp remote-access authentication radius dynamic-author server <address> + + Specifies IP address for Dynamic Authorization Extension server (DM/CoA) + +.. cfgcmd:: set vpn pptp remote-access authentication radius dynamic-author port <port> + + Port for Dynamic Authorization Extension server (DM/CoA) + +.. cfgcmd:: set vpn pptp remote-access authentication radius dynamic-author key <secret> + + Secret for Dynamic Authorization Extension server (DM/CoA) + +.. cfgcmd:: set vpn pptp remote-access authentication radius max-try <number> + + Maximum number of tries to send Access-Request/Accounting-Request queries + +.. cfgcmd:: set vpn pptp remote-access authentication radius timeout <timeout> + + Timeout to wait response from server (seconds) + +.. cfgcmd:: set vpn pptp remote-access authentication radius nas-identifier <identifier> + + Value to send to RADIUS server in NAS-Identifier attribute and to be matched + in DM/CoA requests. + +.. cfgcmd:: set vpn pptp remote-access authentication radius nas-ip-address <address> + + Value to send to RADIUS server in NAS-IP-Address attribute and to be matched + in DM/CoA requests. Also DM/CoA server will bind to that address. + +.. cfgcmd:: set vpn pptp remote-access authentication radius source-address <address> + + Source IPv4 address used in all RADIUS server queires. + +.. cfgcmd:: set vpn pptp remote-access authentication radius rate-limit attribute <attribute> + + Specifies which RADIUS server attribute contains the rate limit information. + The default attribute is `Filter-Id`. + +.. note:: If you set a custom RADIUS attribute you must define it on both + dictionaries at RADIUS server and client. + +.. cfgcmd:: set vpn pptp remote-access authentication radius rate-limit enable + + Enables bandwidth shaping via RADIUS. + +.. cfgcmd:: set vpn pptp remote-access authentication radius rate-limit vendor + + Specifies the vendor dictionary, dictionary needs to be in + /usr/share/accel-ppp/radius. + +Received RADIUS attributes have a higher priority than parameters defined within +the CLI configuration, refer to the explanation below. + +Allocation clients ip addresses by RADIUS +========================================= + +If the RADIUS server sends the attribute ``Framed-IP-Address`` then this IP +address will be allocated to the client and the option ``default-pool`` within the CLI +config is being ignored. + +If the RADIUS server sends the attribute ``Framed-Pool``, IP address will be allocated +from a predefined IP pool whose name equals the attribute value. + +If the RADIUS server sends the attribute ``Stateful-IPv6-Address-Pool``, IPv6 address +will be allocated from a predefined IPv6 pool ``prefix`` whose name equals the attribute value. + +If the RADIUS server sends the attribute ``Delegated-IPv6-Prefix-Pool``, IPv6 +delegation pefix will be allocated from a predefined IPv6 pool ``delegate`` +whose name equals the attribute value. + +.. note:: ``Stateful-IPv6-Address-Pool`` and ``Delegated-IPv6-Prefix-Pool`` are defined in + RFC6911. If they are not defined in your RADIUS server, add new dictionary_. + +User interface can be put to VRF context via RADIUS Access-Accept packet, or change +it via RADIUS CoA. ``Accel-VRF-Name`` is used from these purposes. It is custom `ACCEL-PPP attribute`_. +Define it in your RADIUS server. + +Renaming clients interfaces by RADIUS +===================================== + +If the RADIUS server uses the attribute ``NAS-Port-Id``, ppp tunnels will be +renamed. + +.. note:: The value of the attribute ``NAS-Port-Id`` must be less than 16 + characters, otherwise the interface won't be renamed. + +**** +IPv6 +**** +.. cfgcmd:: set vpn pptp remote-access ppp-options ipv6 <require | prefer | allow | deny> + + Specifies IPv6 negotiation preference. + + * **require** - Require IPv6 negotiation + * **prefer** - Ask client for IPv6 negotiation, do not fail if it rejects + * **allow** - Negotiate IPv6 only if client requests + * **deny** - Do not negotiate IPv6 (default value) + +.. cfgcmd:: set vpn pptp remote-access client-ipv6-pool <IPv6-POOL-NAME> prefix <address> + mask <number-of-bits> + + Use this comand to set the IPv6 address pool from which an PPTP client + will get an IPv6 prefix of your defined length (mask) to terminate the + PPTP endpoint at their side. The mask length can be set from 48 to 128 + bit long, the default value is 64. + +.. cfgcmd:: set vpn pptp remote-access client-ipv6-pool <IPv6-POOL-NAME> delegate <address> + delegation-prefix <number-of-bits> + + Use this command to configure DHCPv6 Prefix Delegation (RFC3633) on + PPTP. You will have to set your IPv6 pool and the length of the + delegation prefix. From the defined IPv6 pool you will be handing out + networks of the defined length (delegation-prefix). The length of the + delegation prefix can be set from 32 to 64 bit long. + +.. cfgcmd:: set vpn pptp remote-access default-ipv6-pool <IPv6-POOL-NAME> + Use this command to define default IPv6 address pool name. -client example (debian 9) -^^^^^^^^^^^^^^^^^^^^^^^^^ +.. code-block:: none + + set vpn pptp remote-access ppp-options ipv6 allow + set vpn pptp remote-access client-ipv6-pool IPv6-POOL delegate '2001:db8:8003::/48' delegation-prefix '56' + set vpn pptp remote-access client-ipv6-pool IPV6-POOL prefix '2001:db8:8002::/48' mask '64' + set vpn pptp remote-access default-ipv6-pool IPv6-POOL + +IPv6 Advanced Options +===================== +.. cfgcmd:: set vpn pptp remote-access ppp-options ipv6-accept-peer-interface-id + + Accept peer interface identifier. By default is not defined. + +.. cfgcmd:: set vpn pptp remote-access ppp-options ipv6-interface-id <random | x:x:x:x> + + Specifies fixed or random interface identifier for IPv6. + By default is fixed. + + * **random** - Random interface identifier for IPv6 + * **x:x:x:x** - Specify interface identifier for IPv6 + +.. cfgcmd:: set vpn pptp remote-access ppp-options ipv6-interface-id <random | x:x:x:x> + + Specifies peer interface identifier for IPv6. By default is fixed. + + * **random** - Random interface identifier for IPv6 + * **x:x:x:x** - Specify interface identifier for IPv6 + * **ipv4-addr** - Calculate interface identifier from IPv4 address. + * **calling-sid** - Calculate interface identifier from calling-station-id. + +********* +Scripting +********* + +.. cfgcmd:: set vpn pptp remote-access extended-scripts on-change <path_to_script> + + Script to run when session interface changed by RADIUS CoA handling + +.. cfgcmd:: set vpn pptp remote-access extended-scripts on-down <path_to_script> + + Script to run when session interface going to terminate + +.. cfgcmd:: set vpn pptp remote-access extended-scripts on-pre-up <path_to_script> + + Script to run before session interface comes up + +.. cfgcmd:: set vpn pptp remote-access extended-scripts on-up <path_to_script> + + Script to run when session interface is completely configured and started + +**************** +Advanced Options +**************** + +Authentication Advanced Options +=============================== + +.. cfgcmd:: set vpn pptp remote-access authentication local-users username <user> disable + + Disable `<user>` account. + +.. cfgcmd:: set vpn pptp remote-access authentication local-users username <user> static-ip + <address> + + Assign static IP address to `<user>` account. + +.. cfgcmd:: set vpn pptp remote-access authentication local-users username <user> rate-limit + download <bandwidth> + + Download bandwidth limit in kbit/s for `<user>`. + +.. cfgcmd:: set vpn pptp remote-access authentication local-users username <user> rate-limit + upload <bandwidth> + + Upload bandwidth limit in kbit/s for `<user>`. + +.. cfgcmd:: set vpn pptp remote-access authentication protocols + <pap | chap | mschap | mschap-v2> + + Require the peer to authenticate itself using one of the following protocols: + pap, chap, mschap, mschap-v2. + +Client IP Pool Advanced Options +=============================== + +.. cfgcmd:: set vpn pptp remote-access client-ip-pool <POOL-NAME> next-pool <NEXT-POOL-NAME> + + Use this command to define the next address pool name. + +PPP Advanced Options +==================== + +.. cfgcmd:: set vpn pptp remote-access ppp-options disable-ccp + + Disable Compression Control Protocol (CCP). + CCP is enabled by default. + +.. cfgcmd:: set vpn pptp remote-access ppp-options interface-cache <number> + + Specifies number of interfaces to keep in cache. It means that don’t + destroy interface after corresponding session is destroyed, instead + place it to cache and use it later for new sessions repeatedly. + This should reduce kernel-level interface creation/deletion rate lack. + Default value is **0**. + +.. cfgcmd:: set vpn pptp remote-access ppp-options ipv4 <require | prefer | allow | deny> + + Specifies IPv4 negotiation preference. -Install the client software via apt and execute pptpsetup to generate the -configuration. + * **require** - Require IPv4 negotiation + * **prefer** - Ask client for IPv4 negotiation, do not fail if it rejects + * **allow** - Negotiate IPv4 only if client requests (Default value) + * **deny** - Do not negotiate IPv4 +.. cfgcmd:: set vpn pptp remote-access ppp-options lcp-echo-failure <number> + + Defines the maximum `<number>` of unanswered echo requests. Upon reaching the + value `<number>`, the session will be reset. Default value is **3**. + +.. cfgcmd:: set vpn pptp remote-access ppp-options lcp-echo-interval <interval> + + If this option is specified and is greater than 0, then the PPP module will + send LCP pings of the echo request every `<interval>` seconds. + Default value is **30**. + +.. cfgcmd:: set vpn pptp remote-access ppp-options lcp-echo-timeout + + Specifies timeout in seconds to wait for any peer activity. If this option + specified it turns on adaptive lcp echo functionality and "lcp-echo-failure" + is not used. Default value is **0**. + +.. cfgcmd:: set vpn pptp remote-access ppp-options min-mtu <number> + + Defines minimum acceptable MTU. If client will try to negotiate less then + specified MTU then it will be NAKed or disconnected if rejects greater MTU. + Default value is **100**. + +.. cfgcmd:: set vpn pptp remote-access ppp-options mppe <require | prefer | deny> + + Specifies :abbr:`MPPE (Microsoft Point-to-Point Encryption)` negotiation + preference. + + * **require** - ask client for mppe, if it rejects drop connection + * **prefer** - ask client for mppe, if it rejects don't fail. (Default value) + * **deny** - deny mppe + + Default behavior - don't ask client for mppe, but allow it if client wants. + Please note that RADIUS may override this option by MS-MPPE-Encryption-Policy + attribute. + +.. cfgcmd:: set vpn pptp remote-access ppp-options mru <number> + + Defines preferred MRU. By default is not defined. + +Global Advanced options +======================= + +.. cfgcmd:: set vpn pptp remote-access description <description> + + Set description. + +.. cfgcmd:: set vpn pptp remote-access limits burst <value> + + Burst count + +.. cfgcmd:: set vpn pptp remote-access limits connection-limit <value> + + Acceptable rate of connections (e.g. 1/min, 60/sec) + +.. cfgcmd:: set vpn pptp remote-access limits timeout <value> + + Timeout in seconds + +.. cfgcmd:: set vpn pptp remote-access mtu + + Maximum Transmission Unit (MTU) (default: **1436**) + +.. cfgcmd:: set vpn pptp remote-access max-concurrent-sessions + + Maximum number of concurrent session start attempts + +.. cfgcmd:: set vpn pptp remote-access name-server <address> + + Connected client should use `<address>` as their DNS server. This + command accepts both IPv4 and IPv6 addresses. Up to two nameservers + can be configured for IPv4, up to three for IPv6. + +.. cfgcmd:: set vpn pptp remote-access shaper fwmark <1-2147483647> + + Match firewall mark value + +.. cfgcmd:: set vpn pptp remote-access snmp master-agent + + Enable SNMP + +.. cfgcmd:: set vpn pptp remote-access wins-server <address> + + Windows Internet Name Service (WINS) servers propagated to client + +********** +Monitoring +********** + +.. opcmd:: show pptp-server sessions + + Use this command to locally check the active sessions in the PPTP + server. .. code-block:: none - apt-get install pptp-linux - pptpsetup --create TESTTUNNEL --server 10.1.1.120 --username test --password test --encrypt - pon TESTTUNNEL + vyos@vyos:~$ show pptp-server sessions + ifname | username | ip | ip6 | ip6-dp | calling-sid | rate-limit | state | uptime | rx-bytes | tx-bytes + --------+----------+----------+-----+--------+----------------+------------+--------+----------+----------+---------- + pptp0 | test | 10.0.0.2 | | | 192.168.10.100 | | active | 00:01:26 | 6.9 KiB | 220 B -The command pon TESTUNNEL establishes the PPTP tunnel to the remote system. +.. code-block:: none + vyos@vyos:~$ show pptp-server statistics + uptime: 0.00:04:52 + cpu: 0% + mem(rss/virt): 5504/100176 kB + core: + mempool_allocated: 152007 + mempool_available: 149007 + thread_count: 1 + thread_active: 1 + context_count: 6 + context_sleeping: 0 + context_pending: 0 + md_handler_count: 6 + md_handler_pending: 0 + timer_count: 2 + timer_pending: 0 + sessions: + starting: 0 + active: 1 + finishing: 0 + pptp: + starting: 0 + active: 1 -All tunnel sessions can be checked via: +*************** +Troubleshooting +*************** .. code-block:: none - run sh pptp-server sessions - ifname | username | calling-sid | ip | type | comp | state | uptime - --------+----------+-------------+--------------+------+------+--------+---------- - ppp0 | test | 10.1.1.99 | 192.168.0.10 | pptp | mppe | active | 00:00:58 + vyos@vyos:~$sudo journalctl -u accel-ppp@pptp -b 0 + + Feb 29 14:58:57 vyos accel-pptp[4629]: pptp: new connection from 192.168.10.100 + Feb 29 14:58:57 vyos accel-pptp[4629]: :: recv [PPTP Start-Ctrl-Conn-Request <Version 1> <Framing 1> <Bearer 1> <Max-Chan 0>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: send [PPTP Start-Ctrl-Conn-Reply <Version 1> <Result 1> <Error 0> <Framing 3> <Bearer 3> <Max-Chan 1>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: recv [PPTP Outgoing-Call-Request <Call-ID 2961> <Call-Serial 2> <Min-BPS 300> <Max-BPS 100000000> <Bearer 3> <Framing 3> <Window-Size 64> <Delay 0>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: send [PPTP Outgoing-Call-Reply <Call-ID 2> <Peer-Call-ID 2961> <Result 1> <Error 0> <Cause 0> <Speed 100000000> <Window-Size 64> <Delay 0> <Channel 0>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: lcp_layer_init + Feb 29 14:58:57 vyos accel-pptp[4629]: :: auth_layer_init + Feb 29 14:58:57 vyos accel-pptp[4629]: :: ccp_layer_init + Feb 29 14:58:57 vyos accel-pptp[4629]: :: ipcp_layer_init + Feb 29 14:58:57 vyos accel-pptp[4629]: :: ipv6cp_layer_init + Feb 29 14:58:57 vyos accel-pptp[4629]: :: ppp establishing + Feb 29 14:58:57 vyos accel-pptp[4629]: :: lcp_layer_start + Feb 29 14:58:57 vyos accel-pptp[4629]: :: send [LCP ConfReq id=75 <auth PAP> <mru 1436> <magic 483920bd>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: recv [PPTP Set-Link-Info] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: recv [LCP ConfReq id=0 <mru 1400> <magic 0142785a> <pcomp> <accomp> < d 3 6 >] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: send [LCP ConfRej id=0 <pcomp> <accomp> < d 3 6 >] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: recv [LCP ConfReq id=1 <mru 1400> <magic 0142785a>] + Feb 29 14:58:57 vyos accel-pptp[4629]: :: send [LCP ConfAck id=1] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: fsm timeout 9 + Feb 29 14:59:00 vyos accel-pptp[4629]: :: send [LCP ConfReq id=75 <auth PAP> <mru 1436> <magic 483920bd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP ConfNak id=75 <auth MSCHAP-v2>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: send [LCP ConfReq id=76 <auth CHAP-md5> <mru 1436> <magic 483920bd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP ConfNak id=76 <auth MSCHAP-v2>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: send [LCP ConfReq id=77 <auth MSCHAP-v1> <mru 1436> <magic 483920bd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP ConfNak id=77 <auth MSCHAP-v2>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: send [LCP ConfReq id=78 <auth MSCHAP-v2> <mru 1436> <magic 483920bd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP ConfAck id=78 <auth MSCHAP-v2> <mru 1436> <magic 483920bd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: lcp_layer_started + Feb 29 14:59:00 vyos accel-pptp[4629]: :: auth_layer_start + Feb 29 14:59:00 vyos accel-pptp[4629]: :: send [MSCHAP-v2 Challenge id=1 <8aa758781676e6a8e85c11963ee010>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP Ident id=2 <MSRASV5.20>] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [LCP Ident id=3 <MSRAS-0-MSEDGEWIN10>] + Feb 29 14:59:00 vyos accel-pptp[4629]: [43B blob data] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [PPTP Set-Link-Info] + Feb 29 14:59:00 vyos accel-pptp[4629]: :: recv [MSCHAP-v2 Response id=1 <90c21af1091f745e8bf22388b058>, <e695ae5aae274c88a3fa1ee3dc9057aece4d53c87b9fea>, F=0, name="test"] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: connect: ppp0 <--> pptp(192.168.10.100) + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ppp connected + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [MSCHAP-v2 Success id=1 "S=347F417CF04BEBBC7F75CFA7F43474C36FB218F9 M=Authentication succeeded"] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: test: authentication succeeded + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: auth_layer_started + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ccp_layer_start + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [CCP ConfReq id=b9 <mppe +H -M +S -L -D -C>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ipcp_layer_start + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ipv6cp_layer_start + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: IPV6CP: discarding packet + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [LCP ProtoRej id=122 <8057>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: recv [IPCP ConfReq id=6 <addr 0.0.0.0> <dns1 0.0.0.0> <wins1 0.0.0.0> <dns2 0.0.0.0> <wins2 0.0.0.0>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [IPCP ConfReq id=3b <addr 10.0.0.1>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [IPCP ConfRej id=6 <dns1 0.0.0.0> <wins1 0.0.0.0> <dns2 0.0.0.0> <wins2 0.0.0.0>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: recv [LCP ProtoRej id=7 <80fd>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ccp_layer_finished + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: recv [IPCP ConfAck id=3b <addr 10.0.0.1>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: recv [IPCP ConfReq id=8 <addr 0.0.0.0>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [IPCP ConfNak id=8 <addr 10.0.0.2>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: recv [IPCP ConfReq id=9 <addr 10.0.0.2>] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: send [IPCP ConfAck id=9] + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: ipcp_layer_started + Feb 29 14:59:00 vyos accel-pptp[4629]: ppp0:test: rename interface to 'pptp0' + Feb 29 14:59:00 vyos accel-pptp[4629]: pptp0:test: pptp: ppp started + +.. _accel-ppp: https://accel-ppp.org/ +.. _dictionary: https://github.com/accel-ppp/accel-ppp/blob/master/accel-pppd/radius/dict/dictionary.rfc6911 +.. _`ACCEL-PPP attribute`: https://github.com/accel-ppp/accel-ppp/blob/master/accel-pppd/radius/dict/dictionary.accel |