diff options
Diffstat (limited to 'docs/configuration')
| -rw-r--r-- | docs/configuration/pki/index.rst | 2 | ||||
| -rw-r--r-- | docs/configuration/vpn/ipsec.rst | 324 |
2 files changed, 266 insertions, 60 deletions
diff --git a/docs/configuration/pki/index.rst b/docs/configuration/pki/index.rst index 44d6de71..99bd2815 100644 --- a/docs/configuration/pki/index.rst +++ b/docs/configuration/pki/index.rst @@ -2,6 +2,8 @@ .. include:: /_include/need_improvement.txt +.. _pki: + ### PKI ### diff --git a/docs/configuration/vpn/ipsec.rst b/docs/configuration/vpn/ipsec.rst index f0c6c723..172b3c64 100644 --- a/docs/configuration/vpn/ipsec.rst +++ b/docs/configuration/vpn/ipsec.rst @@ -32,10 +32,10 @@ for the cipher and hash. Adjust this as necessary. ************************************** IKE (Internet Key Exchange) Attributes ************************************** -IKE performs mutual authentication between two parties and establishes -an IKE security association (SA) that includes shared secret information -that can be used to efficiently establish SAs for Encapsulating Security -Payload (ESP) or Authentication Header (AH) and a set of cryptographic +IKE performs mutual authentication between two parties and establishes +an IKE security association (SA) that includes shared secret information +that can be used to efficiently establish SAs for Encapsulating Security +Payload (ESP) or Authentication Header (AH) and a set of cryptographic algorithms to be used by the SAs to protect the traffic that they carry. https://datatracker.ietf.org/doc/html/rfc5996 @@ -44,64 +44,64 @@ Multiple proposals can be specified in a single group. VyOS IKE group has the next options: -* ``close-action`` defines the action to take if the remote peer unexpectedly +* ``close-action`` defines the action to take if the remote peer unexpectedly closes a CHILD_SA: * ``none`` set action to none (default); - + * ``trap`` installs a trap policy for the CHILD_SA; - + * ``start`` tries to immediately re-create the CHILD_SA; - -* ``dead-peer-detection`` controls the use of the Dead Peer Detection protocol - (DPD, RFC 3706) where R_U_THERE notification messages (IKEv1) or empty - INFORMATIONAL messages (IKEv2) are periodically sent in order to check the + +* ``dead-peer-detection`` controls the use of the Dead Peer Detection protocol + (DPD, RFC 3706) where R_U_THERE notification messages (IKEv1) or empty + INFORMATIONAL messages (IKEv2) are periodically sent in order to check the liveliness of the IPsec peer: - + * ``action`` keep-alive failure action: - + * ``trap`` installs a trap policy, which will catch matching traffic and tries to re-negotiate the tunnel on-demand; - + * ``clear`` closes the CHILD_SA and does not take further action (default); - + * ``restart`` immediately tries to re-negotiate the CHILD_SA under a fresh IKE_SA; - + * ``interval`` keep-alive interval in seconds <2-86400> (default 30); - + * ``timeout`` keep-alive timeout in seconds <2-86400> (default 120) IKEv1 only - -* ``ikev2-reauth`` whether rekeying of an IKE_SA should also reauthenticate + +* ``ikev2-reauth`` whether rekeying of an IKE_SA should also reauthenticate the peer. In IKEv1, reauthentication is always done. - Setting this parameter enables remote host re-authentication during an IKE + Setting this parameter enables remote host re-authentication during an IKE rekey. - + * ``key-exchange`` which protocol should be used to initialize the connection - If not set both protocols are handled and connections will use IKEv2 when + If not set both protocols are handled and connections will use IKEv2 when initiating, but accept any protocol version when responding: - + * ``ikev1`` use IKEv1 for Key Exchange; - + * ``ikev2`` use IKEv2 for Key Exchange; - + * ``lifetime`` IKE lifetime in seconds <0-86400> (default 28800); * ``disable-mobike`` disables MOBIKE Support. MOBIKE is only available for IKEv2 and enabled by default. - + * ``mode`` IKEv1 Phase 1 Mode Selection: - * ``main`` use Main mode for Key Exchanges in the IKEv1 Protocol + * ``main`` use Main mode for Key Exchanges in the IKEv1 Protocol (Recommended Default); - - * ``aggressive`` use Aggressive mode for Key Exchanges in the IKEv1 protocol + + * ``aggressive`` use Aggressive mode for Key Exchanges in the IKEv1 protocol aggressive mode is much more insecure compared to Main mode; - + * ``proposal`` the list of proposals and their parameters: * ``dh-group`` dh-group; - + * ``encryption`` encryption algorithm; * ``hash`` hash algorithm. @@ -111,8 +111,9 @@ VyOS IKE group has the next options: *********************************************** ESP (Encapsulating Security Payload) Attributes *********************************************** -ESP is used to provide confidentiality, data origin authentication, -connectionless integrity, an anti-replay service (a form of partial sequence + +ESP is used to provide confidentiality, data origin authentication, +connectionless integrity, an anti-replay service (a form of partial sequence integrity), and limited traffic flow confidentiality. https://datatracker.ietf.org/doc/html/rfc4303 @@ -122,26 +123,26 @@ Multiple proposals can be specified in a single group. VyOS ESP group has the next options: * ``compression`` Enables the IPComp(IP Payload Compression) protocol which - allows compressing the content of IP packets. - -* ``life-bytes`` ESP life in bytes <1024-26843545600000>. + allows compressing the content of IP packets. + +* ``life-bytes`` ESP life in bytes <1024-26843545600000>. Number of bytes transmitted over an IPsec SA before it expires; - -* ``life-packets`` ESP life in packets <1000-26843545600000>. - Number of packets transmitted over an IPsec SA before it expires; - -* ``lifetime`` ESP lifetime in seconds <30-86400> (default 3600). - How long a particular instance of a connection (a set of - encryption/authentication keys for user packets) should last, + +* ``life-packets`` ESP life in packets <1000-26843545600000>. + Number of packets transmitted over an IPsec SA before it expires; + +* ``lifetime`` ESP lifetime in seconds <30-86400> (default 3600). + How long a particular instance of a connection (a set of + encryption/authentication keys for user packets) should last, from successful negotiation to expiry; - + * ``mode`` the type of the connection: - + * ``tunnel`` tunnel mode (default); * ``transport`` transport mode; -* ``pfs`` whether Perfect Forward Secrecy of keys is desired on the +* ``pfs`` whether Perfect Forward Secrecy of keys is desired on the connection's keying channel and defines a Diffie-Hellman group for PFS: * ``enable`` Inherit Diffie-Hellman group from IKE group (default); @@ -155,20 +156,21 @@ VyOS ESP group has the next options: * ``encryption`` encryption algorithm (default 128 bit AES-CBC); * ``hash`` hash algorithm (default sha1). - + *********************************************** Options (Global IPsec settings) Attributes -*********************************************** +*********************************************** + * ``options`` * ``disable-route-autoinstall`` Do not automatically install routes to remote networks; - - * ``flexvpn`` Allow FlexVPN vendor ID payload (IKEv2 only). Send the Cisco FlexVPN vendor ID payload (IKEv2 only), which is required in order to make Cisco brand devices allow negotiating a local traffic selector (from strongSwan's point of view) that is not the assigned virtual IP address if such an address is requested by strongSwan. Sending the Cisco FlexVPN vendor ID prevents the peer from narrowing the initiator's local traffic selector and allows it to e.g. negotiate a TS of 0.0.0.0/0 == 0.0.0.0/0 instead. This has been tested with a "tunnel mode ipsec ipv4" Cisco template but should also work for GRE encapsulation; - + + * ``flexvpn`` Allows FlexVPN vendor ID payload (IKEv2 only). Send the Cisco FlexVPN vendor ID payload (IKEv2 only), which is required in order to make Cisco brand devices allow negotiating a local traffic selector (from strongSwan's point of view) that is not the assigned virtual IP address if such an address is requested by strongSwan. Sending the Cisco FlexVPN vendor ID prevents the peer from narrowing the initiator's local traffic selector and allows it to e.g. negotiate a TS of 0.0.0.0/0 == 0.0.0.0/0 instead. This has been tested with a "tunnel mode ipsec ipv4" Cisco template but should also work for GRE encapsulation; + * ``interface`` Interface Name to use. The name of the interface on which virtual IP addresses should be installed. If not specified the addresses will be installed on the outbound interface; - - * ``virtual-ip`` Allow install virtual-ip addresses. Comma separated list of virtual IPs to request in IKEv2 configuration payloads or IKEv1 Mode Config. The wildcard addresses 0.0.0.0 and :: request an arbitrary address, specific addresses may be defined. The responder may return a different address, though, or none at all. - + + * ``virtual-ip`` Allows to install virtual-ip addresses. Comma separated list of virtual IPs to request in IKEv2 configuration payloads or IKEv1 Mode Config. The wildcard addresses 0.0.0.0 and :: request an arbitrary address, specific addresses may be defined. The responder may return a different address, though, or none at all. Define the ``virtual-address`` option to configure the IP address in site-to-site hierarchy. + ************************* IPsec policy matching GRE ************************* @@ -266,7 +268,7 @@ However, now you need to make IPsec work with dynamic address on one side. The tricky part is that pre-shared secret authentication doesn't work with dynamic address, so we'll have to use RSA keys. -First, on both routers run the operational command "generate pki key-pair +First, on both routers run the operational command "generate pki key-pair install <key-pair name>". You may choose different length than 2048 of course. .. code-block:: none @@ -283,18 +285,18 @@ install <key-pair name>". You may choose different length than 2048 of course. set pki key-pair ipsec-LEFT private key 'MIIEvgIBADAN...' [edit] -Configuration commands for the private and public key will be displayed on the +Configuration commands for the private and public key will be displayed on the screen which needs to be set on the router first. -Note the command with the public key -(set pki key-pair ipsec-LEFT public key 'MIIBIjANBgkqh...'). +Note the command with the public key +(set pki key-pair ipsec-LEFT public key 'MIIBIjANBgkqh...'). Then do the same on the opposite router: .. code-block:: none vyos@left# run generate pki key-pair install ipsec-RIGHT -Note the command with the public key -(set pki key-pair ipsec-RIGHT public key 'FAAOCAQ8AMII...'). +Note the command with the public key +(set pki key-pair ipsec-RIGHT public key 'FAAOCAQ8AMII...'). Now the noted public keys should be entered on the opposite routers. @@ -363,3 +365,205 @@ On the RIGHT (dynamic address): set vpn ipsec site-to-site peer LEFT remote-address 192.0.2.10 set vpn ipsec site-to-site peer LEFT tunnel 1 local prefix 192.168.99.2/32 # Additional loopback address on the local set vpn ipsec site-to-site peer LEFT tunnel 1 remote prefix 192.168.99.1/32 # Additional loopback address on the remote + + +******************************************* +IKEv2 IPSec road-warriors remote-access VPN +******************************************* + +Internet Key Exchange version 2, IKEv2 for short, is a request/response +protocol developed by both Cisco and Microsoft. It is used to establish +and secure IPv4/IPv6 connections, be it a site-to-site VPN or from a +road-warrior connecting to a hub site. IKEv2, when run in point-to-multipoint, +or remote-access/road-warrior mode, secures the server-side with another layer +by using an x509 signed server certificate. + +Key exchange and payload encryption is still done using IKE and ESP proposals +as known from IKEv1 but the connections are faster to establish, more reliable, +and also support roaming from IP to IP (called MOBIKE which makes sure your +connection does not drop when changing networks from e.g. WIFI to LTE and back). + +This feature closely works together with :ref:`pki` subsystem as you required +a x509 certificate. + +Example +======= + +This example uses CACert as certificate authority. + +.. code-block:: + + set pki ca CAcert_Class_3_Root certificate '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' + set pki ca CAcert_Signing_Authority certificate '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' + +After you obtained your server certificate you can import it from a file +on the local filesystem, or paste it into the CLI. Please note that +when entering the certificate manually you need to strip the +``-----BEGIN KEY-----`` and ``-----END KEY-----`` tags. Also, the certificate +or key needs to be presented in a single line without line breaks (``\n``). + +To import it from the filesystem use: + +.. code-block:: + + import pki certificate <name> file /path/to/cert.pem + +In our example the certificate name is called vyos: + +.. code-block:: + + set pki certificate vyos certificate 'MIIE45s...' + set pki certificate vyos private key 'MIIEvgI...' + +After the PKI certs are all set up we can start configuring our IPSec/IKE +proposals used for key-exchange end data encryption. The used encryption +ciphers and integrity algorithms vary from operating system to operating +system. The ones used in this post are validated to work on both Windows 10 +and iOS/iPadOS 14 to 17. + +.. code-block:: + + set vpn ipsec esp-group ESP-RW compression 'disable' + set vpn ipsec esp-group ESP-RW lifetime '3600' + set vpn ipsec esp-group ESP-RW pfs 'disable' + set vpn ipsec esp-group ESP-RW proposal 10 encryption 'aes128gcm128' + set vpn ipsec esp-group ESP-RW proposal 10 hash 'sha256' + + set vpn ipsec ike-group IKE-RW key-exchange 'ikev2' + set vpn ipsec ike-group IKE-RW lifetime '7200' + set vpn ipsec ike-group IKE-RW mobike 'enable' + set vpn ipsec ike-group IKE-RW proposal 10 dh-group '14' + set vpn ipsec ike-group IKE-RW proposal 10 encryption 'aes128gcm128' + set vpn ipsec ike-group IKE-RW proposal 10 hash 'sha256' + +Every connection/remote-access pool we configure also needs a pool where +we can draw our client IP addresses from. We provide one IPv4 and IPv6 pool. +Authorized clients will receive an IPv4 address from the 192.0.2.128/25 prefix +and an IPv6 address from the 2001:db8:2000::/64 prefix. We can also send some +DNS nameservers down to our clients used on their connection. + +.. code-block:: + + set vpn ipsec remote-access pool ra-rw-ipv4 name-server '192.0.2.1' + set vpn ipsec remote-access pool ra-rw-ipv4 prefix '192.0.2.128/25' + set vpn ipsec remote-access pool ra-rw-ipv6 name-server '2001:db8:1000::1' + set vpn ipsec remote-access pool ra-rw-ipv6 prefix '2001:db8:2000::/64' + +VyOS supports multiple IKEv2 remote-access connections. Every connection can +have its dedicated IKE/ESP ciphers, certificates or local listen address for +e.g. inbound load balancing. + +We configure a new connection named ``rw`` for road-warrior, that identifies +itself as ``192.0.2.1`` to the clients and uses the ``vyos`` certificate +signed by the `CAcert_Class3_Root`` intermediate CA. We select our previously +specified IKE/ESP groups and also link the IP address pool to draw addresses +from. + +.. code-block:: + + set vpn ipsec remote-access connection rw authentication id '192.0.2.1' + set vpn ipsec remote-access connection rw authentication server-mode 'x509' + set vpn ipsec remote-access connection rw authentication x509 ca-certificate 'CAcert_Class_3_Root' + set vpn ipsec remote-access connection rw authentication x509 certificate 'vyos' + set vpn ipsec remote-access connection rw esp-group 'ESP-RW' + set vpn ipsec remote-access connection rw ike-group 'IKE-RW' + set vpn ipsec remote-access connection rw local-address '192.0.2.1' + set vpn ipsec remote-access connection rw pool 'ra-rw-ipv4' + set vpn ipsec remote-access connection rw pool 'ra-rw-ipv6' + +VyOS also supports (currently) two different modes of authentication, local and +RADIUS. To create a new local user named ``vyos`` with password ``vyos`` use the +following commands. + +.. code-block:: + + set vpn ipsec remote-access connection rw authentication client-mode 'eap-mschapv2' + set vpn ipsec remote-access connection rw authentication local-users username vyos password 'vyos' + +If you feel better forwarding all authentication requests to your enterprises +RADIUS server, use the commands below. + +.. code-block:: + + set vpn ipsec remote-access connection rw authentication client-mode 'eap-radius' + set vpn ipsec remote-access radius server 192.0.2.2 key 'secret' + +Client Configuration +==================== + +Configuring VyOS to act as your IPSec access concentrator is one thing, but +you probably need to setup your client connecting to the server so they can +talk to the IPSec gateway. + +Microsoft Windows (10+) +----------------------- + +Windows 10 does not allow a user to choose the integrity and encryption ciphers +using the GUI and it uses some older proposals by default. A user can only +change the proposals on the client side by configuring the IPSec connection +profile via PowerShell. + +We generate a connection profile used by Windows clients that will connect to +the "rw" connection on our VyOS server on the VPN servers IP address/fqdn +`vpn.vyos.net`. + +.. note:: Microsoft Windows expects the server name to be also used in the + server's certificate common name, so it's best to use this DNS name for + your VPN connection. + +.. code-block:: + + vyos@vyos:~$ generate ipsec profile windows-remote-access rw remote vpn.vyos.net + + ==== <snip> ==== + Add-VpnConnection -Name "VyOS IKEv2 VPN" -ServerAddress "vpn.vyos.net" -TunnelType "Ikev2" + Set-VpnConnectionIPsecConfiguration -ConnectionName "VyOS IKEv2 VPN" -AuthenticationTransformConstants GCMAES128 -CipherTransformConstants GCMAES128 -EncryptionMethod GCMAES128 -IntegrityCheckMethod SHA256128 -PfsGroup None -DHGroup "Group14" -PassThru -Force + ==== </snip> ==== + +As both Microsoft Windows and Apple iOS/iPadOS only support a certain set of +encryption ciphers and integrity algorithms we will validate the configured +IKE/ESP proposals and only list the compatible ones to the user — if multiple +are defined. If there are no matching proposals found — we can not generate a +profile for you. + +When first connecting to the new VPN the user is prompted to enter proper +credentials. + +Apple iOS/iPadOS (14.2+) +------------------------ + +Like on Microsoft Windows, Apple iOS/iPadOS out of the box does not expose +all available VPN options via the device GUI. + +If you want, need, and should use more advanced encryption ciphers (default +is still 3DES) you need to provision your device using a so-called "Device +Profile". A profile is a simple text file containing XML nodes with a +``.mobileconfig`` file extension that can be sent and opened on any device +from an E-Mail. + +Profile generation happens from the operational level and is as simple as +issuing the following command to create a profile to connect to the IKEv2 +access server at ``vpn.vyos.net`` with the configuration for the ``rw`` +remote-access connection group. + +.. note:: Apple iOS/iPadOS expects the server name to be also used in the + server's certificate common name, so it's best to use this DNS name for + your VPN connection. + +.. code-block:: + + vyos@vyos:~$ generate ipsec profile ios-remote-access rw remote vpn.vyos.net + + ==== <snip> ==== + <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> + <plist version="1.0"> + ... + </plist> + ==== </snip> ==== + +In the end, an XML structure is generated which can be saved as +``vyos.mobileconfig`` and sent to the device by E-Mail where it later can +be imported. + +During profile import, the user is asked to enter its IPSec credentials +(username and password) which is stored on the mobile. |