diff options
Diffstat (limited to 'docs/services')
| -rw-r--r-- | docs/services/tftp.rst | 50 |
1 files changed, 30 insertions, 20 deletions
diff --git a/docs/services/tftp.rst b/docs/services/tftp.rst index fbc21bd6..56990768 100644 --- a/docs/services/tftp.rst +++ b/docs/services/tftp.rst @@ -1,44 +1,54 @@ .. _tftp-server: +#### TFTP ----- +#### -Trivial File Transfer Protocol (TFTP_) is a simple lockstep File Transfer -Protocol which allows a client to get a file from or put a file onto a remote +:abbr:`TFTP (Trivial File Transfer Protocol) is a simple, lockstep file transfer +protocol which allows a client to get a file from or put a file onto a remote host. One of its primary uses is in the early stages of nodes booting from a local area network. TFTP has been used for this application because it is very simple to implement. -Example -^^^^^^^ - -.. code-block:: none +Configuration +============= - # If you want to enable uploads, else TFTP server will act as read-only (optional) - set service tftp-server allow-upload +.. cfgcmd:: set service tftp-server directory '/config/tftpboot' - # Directory for TFTP server content - set service tftp-server directory '/config/tftpboot' +Enable TFTP service by specifying the directory which will be used to serve +files. - # On which addresses we want to listen for incoming TFTP connections? (mandatory) - set service tftp-server listen-address '2001:db8:ffee::1' - set service tftp-server listen-address '10.10.1.1' - -.. note:: Choose your ``directory`` location carefully or you will loose the +.. hint:: Choose your ``directory`` location carefully or you will loose the content on image upgrades. Any directory under ``/config`` is save at this will be migrated. +.. cfgcmd:: set service tftp-server listen-address '<address>' + +Configure the IPv4 or IPv6 listen address of the TFTP server. Multiple IPv4 and +IPv6 addresses can be given. There will be one TFTP server instances listening +on each IP address. + .. note:: Configuring a listen-address is essential for the service to work. +.. cfgcmd:: set service tftp-server allow-upload + +Optional, if you want to enable uploads, else TFTP server will act as read-only +server. + +Example +------- + +Provide TFTP server listening on both IPv4 and IPv6 addresses ``192.0.2.1`` and +``2001:db8::1`` serving the content from ``/config/tftpboot``. Uploading via +TFTP to this server is not allowed! + The resulting configuration will look like: .. code-block:: none vyos@vyos# show service tftp-server { - allow-upload directory /config/tftpboot - listen-address 2001:db8:ffee::1 - listen-address 10.10.1.1 + listen-address 2001:db8::1 + listen-address 192.0.2.1 } - |