path: root/docs/_locale/pt/cli.pot

msgid ""
msgstr ""
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: Localazy (https://localazy.com)\n"
"Project-Id-Version: VyOS Documentation\n"
"Language: pt\n"
"Plural-Forms: nplurals=2; plural=(n>=0 && n<=1) ? 0 : 1;\n"

#: ../../cli.rst:90
msgid "\"Clear\" commands are completely non-disruptive to any system operations. Generally, they can be used freely without hesitation."
msgstr "\"Clear\" commands are completely non-disruptive to any system operations. Generally, they can be used freely without hesitation."

#: ../../cli.rst:151
msgid "\"Execute\" commands are for executing various diagnostic and auxilliary actions that the system would never perform by itself."
msgstr "\"Execute\" commands are for executing various diagnostic and auxilliary actions that the system would never perform by itself."

#: ../../cli.rst:137
msgid "\"Force\" commands force the system to perform an action that it might perform by itself at a later point."
msgstr "\"Force\" commands force the system to perform an action that it might perform by itself at a later point."

#: ../../cli.rst:174
msgid "\"Monitor\" commands initiate various monitoring operations that may output information continuously, until terminated with ``Ctrl-C`` or disabled."
msgstr "\"Monitor\" commands initiate various monitoring operations that may output information continuously, until terminated with ``Ctrl-C`` or disabled."

#: ../../cli.rst:106
msgid "\"Reset\" commands can be locally-disruptive. They may, for example, terminate a single user session or a session with a dynamic routing protocol peer."
msgstr "\"Reset\" commands can be locally-disruptive. They may, for example, terminate a single user session or a session with a dynamic routing protocol peer."

#: ../../cli.rst:123
msgid "\"Restart\" operations may disrupt an entire subsystem. Most often they initiate a restart of a server process, which causes it to be unavailable for a brief period and resets all the process state."
msgstr "\"Restart\" operations may disrupt an entire subsystem. Most often they initiate a restart of a server process, which causes it to be unavailable for a brief period and resets all the process state."

#: ../../cli.rst:162
msgid "\"Show\" commands display various system information. They may occasionally use a pager for long outputs, that you can quit by pressing the Q button. Their output is always finite, however."
msgstr "\"Show\" commands display various system information. They may occasionally use a pager for long outputs, that you can quit by pressing the Q button. Their output is always finite, however."

#: ../../cli.rst:224
msgid "**Active** or **running configuration** is the system configuration that is loaded  and currently active (used by VyOS). Any change in the configuration will have to be committed to belong to the active/running configuration."
msgstr "**Active** or **running configuration** is the system configuration that is loaded  and currently active (used by VyOS). Any change in the configuration will have to be committed to belong to the active/running configuration."

#: ../../cli.rst:491
msgid "**Example:**"
msgstr "**Example:**"

#: ../../cli.rst:235
msgid "**Saved configuration** is the one saved to a file using the :cfgcmd:`save` command. It allows you to keep safe a configuration for future uses. There can be multiple configuration files. The default or \"boot\" configuration is saved and loaded from the file ``/config/config.boot``."
msgstr "**Saved configuration** is the one saved to a file using the :cfgcmd:`save` command. It allows you to keep safe a configuration for future uses. There can be multiple configuration files. The default or \"boot\" configuration is saved and loaded from the file ``/config/config.boot``."

#: ../../cli.rst:229
msgid "**Working configuration** is the one that is currently being modified in configuration mode. Changes made to the working configuration do not go into effect until the changes are committed with the :cfgcmd:`commit` command. At which time the working configuration will become the active or running configuration."
msgstr "**Working configuration** is the one that is currently being modified in configuration mode. Changes made to the working configuration do not go into effect until the changes are committed with the :cfgcmd:`commit` command. At which time the working configuration will become the active or running configuration."

#: ../../cli.rst:222
msgid "A VyOS system has three major types of configurations:"
msgstr "A VyOS system has three major types of configurations:"

#: ../../cli.rst:688
msgid "A reboot because you did not enter ``confirm`` will not take you necessarily to the *saved configuration*, but to the point before the unfortunate commit."
msgstr "A reboot because you did not enter ``confirm`` will not take you necessarily to the *saved configuration*, but to the point before the unfortunate commit."

#: ../../cli.rst:693
msgid "Access opmode from config mode"
msgstr "Access opmode from config mode"

#: ../../cli.rst:810
msgid "Access to these commands are possible through the use of the ``run [command]`` command. From this command you will have access to everything accessible from operational mode."
msgstr "Access to these commands are possible through the use of the ``run [command]`` command. From this command you will have access to everything accessible from operational mode."

#: ../../cli.rst:769
msgid "Add comment as an annotation to a configuration node."
msgstr "Add comment as an annotation to a configuration node."

#: ../../cli.rst:651
msgid "All changes in the working config will thus be lost."
msgstr "All changes in the working config will thus be lost."

#: ../../cli.rst:464
msgid "All commands executed here are relative to the configuration level you have entered. You can do everything from the top level, but commands will be quite lengthy when manually typing them."
msgstr "All commands executed here are relative to the configuration level you have entered. You can do everything from the top level, but commands will be quite lengthy when manually typing them."

#: ../../cli.rst:794
msgid "An important thing to note is that since the comment is added on top of the section, it will not appear if the ``show <section>`` command is used. With the above example, the `show firewall` command would return starting after the ``firewall {`` line, hiding the comment."
msgstr "An important thing to note is that since the comment is added on top of the section, it will not appear if the ``show <section>`` command is used. With the above example, the `show firewall` command would return starting after the ``firewall {`` line, hiding the comment."

#: ../../cli.rst:602
msgid "Any change you do on the configuration, will not take effect until committed using the :cfgcmd:`commit` command in configuration mode."
msgstr "Any change you do on the configuration, will not take effect until committed using the :cfgcmd:`commit` command in configuration mode."

#: ../../cli.rst:330
msgid "Both these ``show`` commands should be executed when in operational mode, they do not work directly in configuration mode. There is a special way on how to :ref:`run_opmode_from_config_mode`."
msgstr "Both these ``show`` commands should be executed when in operational mode, they do not work directly in configuration mode. There is a special way on how to :ref:`run_opmode_from_config_mode`."

#: ../../cli.rst:330
msgid "Both these ``show`` commands should be executed when in operational mode, they do not work directly in configuration mode. There is a special way on how to :ref:run_opmode_from_config_mode."
msgstr "Both these ``show`` commands should be executed when in operational mode, they do not work directly in configuration mode. There is a special way on how to :ref:run_opmode_from_config_mode."

#: ../../cli.rst:302
msgid "By default, the configuration is displayed in a hierarchy like the above example, this is only one of the possible ways to display the configuration. When the configuration is generated and the device is configured, changes are added through a collection of :cfgcmd:`set` and :cfgcmd:`delete` commands."
msgstr "By default, the configuration is displayed in a hierarchy like the above example, this is only one of the possible ways to display the configuration. When the configuration is generated and the device is configured, changes are added through a collection of :cfgcmd:`set` and :cfgcmd:`delete` commands."

#: ../../cli.rst:5
msgid "Command Line Interface"
msgstr "Command Line Interface"

#: ../../cli.rst:814
msgid "Command completion and syntax help with ``?`` and ``[tab]`` will also work."
msgstr "Command completion and syntax help with ``?`` and ``[tab]`` will also work."

#: ../../cli.rst:757
msgid "Compare configurations"
msgstr "Compare configurations"

#: ../../cli.rst:184
msgid "Configuration Mode"
msgstr "Configuration Mode"

#: ../../cli.rst:211
msgid "Configuration Overview"
msgstr "Configuration Overview"

#: ../../cli.rst:566
msgid "Configuration commands are flattened from the tree into 'one-liner' commands shown in :opcmd:`show configuration commands` from operation mode. Commands are relative to the level where they are executed and all redundant information from the current level is removed from the command entered."
msgstr "Configuration commands are flattened from the tree into 'one-liner' commands shown in :opcmd:`show configuration commands` from operation mode. Commands are relative to the level where they are executed and all redundant information from the current level is removed from the command entered."

#: ../../cli.rst:647
msgid "Configuration mode can not be exited while uncommitted changes exist. To exit configuration mode without applying changes, the :cfgcmd:`exit discard` command must be used."
msgstr "Configuration mode can not be exited while uncommitted changes exist. To exit configuration mode without applying changes, the :cfgcmd:`exit discard` command must be used."

#: ../../cli.rst:701
msgid "Copy a configuration element."
msgstr "Copy a configuration element."

#: ../../cli.rst:447
msgid "Editing the configuration"
msgstr "Editing the configuration"

#: ../../cli.rst:780
msgid "Example:"
msgstr "Example:"

#: ../../cli.rst:30
msgid "Example showing possible show commands:"
msgstr "Example showing possible show commands:"

#: ../../cli.rst:96
#: ../../cli.rst:140
#: ../../cli.rst:154
#: ../../cli.rst:166
#: ../../cli.rst:178
msgid "Examples:"
msgstr "Examples:"

#: ../../cli.rst:542
msgid "Exiting from the configuration mode is done via the :cfgcmd:`exit` command from the top level, executing :cfgcmd:`exit` from within a sub-level takes you back to the top level."
msgstr "Exiting from the configuration mode is done via the :cfgcmd:`exit` command from the top level, executing :cfgcmd:`exit` from within a sub-level takes you back to the top level."

#: ../../cli.rst:21
msgid "For example typing ``sh`` followed by the ``TAB`` key will complete to ``show``. Pressing ``TAB`` a second time will display the possible sub-commands of the ``show`` command."
msgstr "For example typing ``sh`` followed by the ``TAB`` key will complete to ``show``. Pressing ``TAB`` a second time will display the possible sub-commands of the ``show`` command."

#: ../../cli.rst:310
msgid "Get a collection of all the set commands required which led to the running configuration."
msgstr "Get a collection of all the set commands required which led to the running configuration."

#: ../../cli.rst:1052
msgid "If you are remotely connected, you will lose your connection. You may want to copy first the config, edit it to ensure connectivity, and load the edited config."
msgstr "If you are remotely connected, you will lose your connection. You may want to copy first the config, edit it to ensure connectivity, and load the edited config."

#: ../../cli.rst:1038
msgid "In the case you want to completely delete your configuration and restore the default one, you can enter the following command in configuration mode:"
msgstr "In the case you want to completely delete your configuration and restore the default one, you can enter the following command in configuration mode:"

#: ../../cli.rst:522
msgid "It is also possible to display all :cfgcmd:`set` commands within configuration mode using :cfgcmd:`show | commands`"
msgstr "It is also possible to display all :cfgcmd:`set` commands within configuration mode using :cfgcmd:`show | commands`"

#: ../../cli.rst:413
msgid "It is also possible to display all `set` commands within configuration mode using :cfgcmd:`show | commands`"
msgstr "It is also possible to display all `set` commands within configuration mode using :cfgcmd:`show | commands`"

#: ../../cli.rst:726
msgid "Local Archive"
msgstr "Local Archive"

#: ../../cli.rst:717
msgid "Managing configurations"
msgstr "Managing configurations"

#: ../../cli.rst:77
msgid "Many operational mode commands in VyOS are placed in families such as ``show``, ``clear``, or ``reset``. Every such family has a specific meaning to allow the user to guess how the command is going to behave — in particular, whether it will be disruptive to the system or not."
msgstr "Many operational mode commands in VyOS are placed in families such as ``show``, ``clear``, or ``reset``. Every such family has a specific meaning to allow the user to guess how the command is going to behave — in particular, whether it will be disruptive to the system or not."

#: ../../cli.rst:93
msgid "Most often their purpose is to remove or reset various debug and diagnostic information such as system logs and packet counters."
msgstr "Most often their purpose is to remove or reset various debug and diagnostic information such as system logs and packet counters."

#: ../../cli.rst:679
msgid "Note that 'reload' loads the most recent completed configuration and does not require a reboot."
msgstr "Note that 'reload' loads the most recent completed configuration and does not require a reboot."

#: ../../cli.rst:745
msgid "Note that ``show`` command respects your edit level and from this level you can view the modified firewall ruleset with just ``show`` with no parameters."
msgstr "Note that ``show`` command respects your edit level and from this level you can view the modified firewall ruleset with just ``show`` with no parameters."

#: ../../cli.rst:82
msgid "Note that this convention was not always followed with perfect consistency and some commands may still be in wrong families, so you should always check the command help and documentation if you are not sure what exactly it does."
msgstr "Note that this convention was not always followed with perfect consistency and some commands may still be in wrong families, so you should always check the command help and documentation if you are not sure what exactly it does."

#: ../../cli.rst:11
msgid "Operational Mode"
msgstr "Operational Mode"

#: ../../cli.rst:13
msgid "Operational mode allows for commands to perform operational system tasks and view system and service status, while configuration mode allows for the modification of system configuration."
msgstr "Operational mode allows for commands to perform operational system tasks and view system and service status, while configuration mode allows for the modification of system configuration."

#: ../../cli.rst:75
msgid "Operational mode command families"
msgstr "Operational mode command families"

#: ../../cli.rst:194
msgid "Prompt changes from ``$`` to ``#``. To exit configuration mode, type ``exit``."
msgstr "Prompt changes from ``$`` to ``#``. To exit configuration mode, type ``exit``."

#: ../../cli.rst:853
msgid "Remote Archive"
msgstr "Remote Archive"

#: ../../cli.rst:734
msgid "Rename a configuration element."
msgstr "Rename a configuration element."

#: ../../cli.rst:926
msgid "Restore Default"
msgstr "Restore Default"

#: ../../cli.rst:838
msgid "Revisions are stored on disk. You can view, compare and rollback them to any previous revisions if something goes wrong."
msgstr "Revisions are stored on disk. You can view, compare and rollback them to any previous revisions if something goes wrong."

#: ../../cli.rst:831
msgid "Rollback Changes"
msgstr "Rollback Changes"

#: ../../cli.rst:948
msgid "Rollback to revision N (currently requires reboot)"
msgstr "Rollback to revision N (currently requires reboot)"

#: ../../cli.rst:893
msgid "Saving and loading manually"
msgstr "Saving and loading manually"

#: ../../cli.rst:203
msgid "See the configuration section of this document for more information on configuration mode."
msgstr "See the configuration section of this document for more information on configuration mode."

#: ../../cli.rst:133
msgid "Seeing and navigating the configuration"
msgstr "Seeing and navigating the configuration"

#: ../../cli.rst:923
msgid "Show commit revision difference."
msgstr "Show commit revision difference."

#: ../../cli.rst:985
msgid "Since username and password are part of the URI, they need to be properly url encoded if containing special characters."
msgstr "Since username and password are part of the URI, they need to be properly url encoded if containing special characters."

#: ../../cli.rst:974
msgid "Specify remote location of commit archive as any of the below :abbr:`URI (Uniform Resource Identifier)`"
msgstr "Specify remote location of commit archive as any of the below :abbr:`URI (Uniform Resource Identifier)`"

#: ../../cli.rst:220
msgid "Terminology"
msgstr "Terminology"

#: ../../cli.rst:17
msgid "The CLI provides a built-in help system. In the CLI the ``?`` key may be used to display available commands. The ``TAB`` key can be used to auto-complete commands and will present the help system upon a conflict or unknown value."
msgstr "The CLI provides a built-in help system. In the CLI the ``?`` key may be used to display available commands. The ``TAB`` key can be used to auto-complete commands and will present the help system upon a conflict or unknown value."

#: ../../cli.rst:7
msgid "The VyOS :abbr:`CLI (Command-Line Interface)` comprises an operational and a configuration mode."
msgstr "The VyOS :abbr:`CLI (Command-Line Interface)` comprises an operational and a configuration mode."

#: ../../cli.rst:487
msgid "The :cfgcmd:`show` command within configuration mode will show the working configuration indicating line changes with ``+`` for additions, ``>`` for replacements and ``-`` for deletions."
msgstr "The :cfgcmd:`show` command within configuration mode will show the working configuration indicating line changes with ``+`` for additions, ``>`` for replacements and ``-`` for deletions."

#: ../../cli.rst:653
msgid "The ``comment`` command allows you to insert a comment above the ``<config node>`` configuration section. When shown, comments are enclosed with ``/*`` and ``*/`` as open/close delimiters. Comments need to be commited, just like other config changes."
msgstr "The ``comment`` command allows you to insert a comment above the ``<config node>`` configuration section. When shown, comments are enclosed with ``/*`` and ``*/`` as open/close delimiters. Comments need to be commited, just like other config changes."

#: ../../cli.rst:771
msgid "The ``comment`` command allows you to insert a comment above the ``<config node>`` configuration section. When shown, comments are enclosed with ``/*`` and ``*/`` as open/close delimiters. Comments need to be committed, just like other config changes."
msgstr "The ``comment`` command allows you to insert a comment above the ``<config node>`` configuration section. When shown, comments are enclosed with ``/*`` and ``*/`` as open/close delimiters. Comments need to be committed, just like other config changes."

#: ../../cli.rst:897
msgid "The command :cfgcmd:`compare` allows you to compare different type of configurations. It also lets you compare different revisions through the :cfgcmd:`compare N M` command, where N and M are revision numbers. The output will describe how the configuration N is when compared to M indicating with a plus sign (``+``) the additional parts N has when compared to M, and indicating with a minus sign (``-``) the lacking parts N misses when compared to M."
msgstr "The command :cfgcmd:`compare` allows you to compare different type of configurations. It also lets you compare different revisions through the :cfgcmd:`compare N M` command, where N and M are revision numbers. The output will describe how the configuration N is when compared to M indicating with a plus sign (``+``) the additional parts N has when compared to M, and indicating with a minus sign (``-``) the lacking parts N misses when compared to M."

#: ../../cli.rst:926
msgid "The command above also lets you see the difference between two commits. By default the difference with the running config is shown."
msgstr "The command above also lets you see the difference between two commits. By default the difference with the running config is shown."

#: ../../cli.rst:338
msgid "The config mode"
msgstr "The config mode"

#: ../../cli.rst:558
msgid "The configuration can be edited by the use of :cfgcmd:`set` and :cfgcmd:`delete` commands from within configuration mode."
msgstr "The configuration can be edited by the use of :cfgcmd:`set` and :cfgcmd:`delete` commands from within configuration mode."

#: ../../cli.rst:468
msgid "The current hierarchy level can be changed by the :cfgcmd:`edit` command."
msgstr "The current hierarchy level can be changed by the :cfgcmd:`edit` command."

#: ../../cli.rst:669
msgid "The definition of 'revert' and 'a previous configuration' depends on the setting:"
msgstr "The definition of 'revert' and 'a previous configuration' depends on the setting:"

#: ../../cli.rst:988
msgid "The number of revisions don't affect the commit-archive."
msgstr "The number of revisions don't affect the commit-archive."

#: ../../cli.rst:1049
msgid "Then you may want to :cfgcmd:`save` in order to delete the saved configuration too."
msgstr "Then you may want to :cfgcmd:`save` in order to delete the saved configuration too."

#: ../../cli.rst:531
msgid "These commands are also relative to the level you are inside and only relevant configuration blocks will be displayed when entering a sub-level."
msgstr "These commands are also relative to the level you are inside and only relevant configuration blocks will be displayed when entering a sub-level."

#: ../../cli.rst:584
msgid "These two commands above are essentially the same, just executed from different levels in the hierarchy."
msgstr "These two commands above are essentially the same, just executed from different levels in the hierarchy."

#: ../../cli.rst:110
msgid "They should be used with caution since they may have a significant impact on a particular users in the network."
msgstr "They should be used with caution since they may have a significant impact on a particular users in the network."

#: ../../cli.rst:127
msgid "They should be used with extreme caution."
msgstr "They should be used with extreme caution."

#: ../../cli.rst:937
msgid "This means four commits ago we did ``set system ipv6 disable-forwarding``."
msgstr "This means four commits ago we did ``set system ipv6 disable-forwarding``."

#: ../../cli.rst:589
msgid "To delete a configuration entry use the :cfgcmd:`delete` command, this also deletes all sub-levels under the current level you've specified in the :cfgcmd:`delete` command. Deleting an entry will also result in the element reverting back to its default value if one exists."
msgstr "To delete a configuration entry use the :cfgcmd:`delete` command, this also deletes all sub-levels under the current level you've specified in the :cfgcmd:`delete` command. Deleting an entry will also result in the element reverting back to its default value if one exists."

#: ../../cli.rst:186
msgid "To enter configuration mode use the ``configure`` command:"
msgstr "To enter configuration mode use the ``configure`` command:"

#: ../../cli.rst:776
msgid "To remove an existing comment from your current configuration, specify an empty string enclosed in double quote marks (``\"\"``) as the comment text."
msgstr "To remove an existing comment from your current configuration, specify an empty string enclosed in double quote marks (``\"\"``) as the comment text."

#: ../../cli.rst:334
msgid "Use the ``show configuration commands | strip-private`` command when you want to hide private data. You may want to do so if you want to share your configuration on the `forum`_."
msgstr "Use the ``show configuration commands | strip-private`` command when you want to hide private data. You may want to do so if you want to share your configuration on the `forum`_."

#: ../../cli.rst:1014
msgid "Use this command to load a configuration which will replace the running configuration. Define the location of the configuration file to be loaded. You can use a path to a local file, an SCP address, an SFTP address, an FTP address, an HTTP address, an HTTPS address or a TFTP address."
msgstr "Use this command to load a configuration which will replace the running configuration. Define the location of the configuration file to be loaded. You can use a path to a local file, an SCP address, an SFTP address, an FTP address, an HTTP address, an HTTPS address or a TFTP address."

#: ../../cli.rst:620
msgid "Use this command to preserve configuration changes upon reboot. By default it is stored at */config/config.boot*. In the case you want to store the configuration file somewhere else, you can add a local path, a SCP address, a FTP address or a TFTP address."
msgstr "Use this command to preserve configuration changes upon reboot. By default it is stored at */config/config.boot*. In the case you want to store the configuration file somewhere else, you can add a local path, a SCP address, a FTP address or a TFTP address."

#: ../../cli.rst:563
msgid "Use this command to set the value of a parameter or to create a new element."
msgstr "Use this command to set the value of a parameter or to create a new element."

#: ../../cli.rst:873
msgid "Use this command to spot what the differences are between different configurations."
msgstr "Use this command to spot what the differences are between different configurations."

#: ../../cli.rst:664
msgid "Use this command to temporarily commit your changes and set the number of minutes available for confirmation. ``confirm`` must be entered within those minutes, otherwise the system will revert into a previous configuration. The default value is 10 minutes."
msgstr "Use this command to temporarily commit your changes and set the number of minutes available for confirmation. ``confirm`` must be entered within those minutes, otherwise the system will revert into a previous configuration. The default value is 10 minutes."

#: ../../cli.rst:664
msgid "Use this command to temporarily commit your changes and set the number of minutes available for validation. ``confirm`` must be entered within those minutes, otherwise the system will reboot into the previous configuration. The default value is 10 minutes."
msgstr "Use this command to temporarily commit your changes and set the number of minutes available for validation. ``confirm`` must be entered within those minutes, otherwise the system will reboot into the previous configuration. The default value is 10 minutes."

#: ../../cli.rst:843
msgid "View all existing revisions on the local system."
msgstr "View all existing revisions on the local system."

#: ../../cli.rst:246
msgid "View the current active configuration, also known as the running configuration, from the operational mode."
msgstr "View the current active configuration, also known as the running configuration, from the operational mode."

#: ../../cli.rst:342
msgid "View the current active configuration in JSON format."
msgstr "View the current active configuration in JSON format."

#: ../../cli.rst:350
msgid "View the current active configuration in readable JSON format."
msgstr "View the current active configuration in readable JSON format."

#: ../../cli.rst:965
msgid "VyOS can upload the configuration to a remote location after each call to :cfgcmd:`commit`. You will have to set the commit-archive location. TFTP, FTP, SCP and SFTP servers are supported. Every time a :cfgcmd:`commit` is successful the ``config.boot`` file will be copied to the defined destination(s). The filename used on the remote host will be ``config.boot-hostname.YYYYMMDD_HHMMSS``."
msgstr "VyOS can upload the configuration to a remote location after each call to :cfgcmd:`commit`. You will have to set the commit-archive location. TFTP, FTP, SCP and SFTP servers are supported. Every time a :cfgcmd:`commit` is successful the ``config.boot`` file will be copied to the defined destination(s). The filename used on the remote host will be ``config.boot-hostname.YYYYMMDD_HHMMSS``."

#: ../../cli.rst:852
msgid "VyOS can upload the configuration to a remote location after each call to :cfgcmd:`commit`. You will have to set the commit-archive location. TFTP, FTP, SCP and SFTP servers are supported. Every time a :cfgcmd:`commit` is successfull the ``config.boot`` file will be copied to the defined destination(s). The filename used on the remote host will be ``config.boot-hostname.YYYYMMDD_HHMMSS``."
msgstr "VyOS can upload the configuration to a remote location after each call to :cfgcmd:`commit`. You will have to set the commit-archive location. TFTP, FTP, SCP and SFTP servers are supported. Every time a :cfgcmd:`commit` is successfull the ``config.boot`` file will be copied to the defined destination(s). The filename used on the remote host will be ``config.boot-hostname.YYYYMMDD_HHMMSS``."

#: ../../cli.rst:829
msgid "VyOS comes with an integrated versioning system for the system configuration. It automatically maintains a backup of every previous configuration which has been committed to the system. The configurations are versioned locally for rollback but they can also be stored on a remote host for archiving/backup reasons."
msgstr "VyOS comes with an integrated versioning system for the system configuration. It automatically maintains a backup of every previous configuration which has been committed to the system. The configurations are versioned locally for rollback but they can also be stored on a remote host for archiving/backup reasons."

#: ../../cli.rst:869
msgid "VyOS lets you compare different configurations."
msgstr "VyOS lets you compare different configurations."

#: ../../cli.rst:213
msgid "VyOS makes use of a unified configuration file for the entire system's configuration: ``/config/config.boot``. This allows easy template creation, backup, and replication of system configuration. A system can thus also be easily cloned by simply copying the required configuration files."
msgstr "VyOS makes use of a unified configuration file for the entire system's configuration: ``/config/config.boot``. This allows easy template creation, backup, and replication of system configuration. A system can thus also be easily cloned by simply copying the required configuration files."

#: ../../cli.rst:558
msgid "What if you are doing something dangerous? Suppose you want to setup a firewall, and you are not sure there are no mistakes that will lock you out of your system. You can use confirmed commit. If you issue the ``commit-confirm`` command, your changes will be commited, and if you don't issue  the ``confirm`` command in 10 minutes, your system will reboot into previous config revision."
msgstr "What if you are doing something dangerous? Suppose you want to setup a firewall, and you are not sure there are no mistakes that will lock you out of your system. You can use confirmed commit. If you issue the ``commit-confirm`` command, your changes will be commited, and if you don't issue  the ``confirm`` command in 10 minutes, your system will reboot into previous config revision."

#: ../../cli.rst:682
msgid "What if you are doing something dangerous? Suppose you want to setup a firewall, and you are not sure there are no mistakes that will lock you out of your system. You can use confirmed commit. If you issue the ``commit-confirm`` command, your changes will be committed, and if you don't issue  the ``confirm`` command in 10 minutes, your system will reboot into previous config revision."
msgstr "What if you are doing something dangerous? Suppose you want to setup a firewall, and you are not sure there are no mistakes that will lock you out of your system. You can use confirmed commit. If you issue the ``commit-confirm`` command, your changes will be committed, and if you don't issue  the ``confirm`` command in 10 minutes, your system will reboot into previous config revision."

#: ../../cli.rst:449
msgid "When entering the configuration mode you are navigating inside a tree structure, to enter configuration mode enter the command :opcmd:`configure` when in operational mode."
msgstr "When entering the configuration mode you are navigating inside a tree structure, to enter configuration mode enter the command :opcmd:`configure` when in operational mode."

#: ../../cli.rst:460
msgid "When going into configuration mode, prompt changes from ``$`` to ``#``."
msgstr "When going into configuration mode, prompt changes from ``$`` to ``#``."

#: ../../cli.rst:805
msgid "When inside configuration mode you are not directly able to execute operational commands."
msgstr "When inside configuration mode you are not directly able to execute operational commands."

#: ../../cli.rst:61
msgid "When the output of a command results in more lines than can be displayed on the terminal screen the output is paginated as indicated by a ``:`` prompt."
msgstr "When the output of a command results in more lines than can be displayed on the terminal screen the output is paginated as indicated by a ``:`` prompt."

#: ../../cli.rst:990
msgid "When using Git as destination for the commit archive the ``source-address`` CLI option has no effect."
msgstr "When using Git as destination for the commit archive the ``source-address`` CLI option has no effect."

#: ../../cli.rst:1008
msgid "When using the save_ command, you can add a specific location where to store your configuration file. And, when needed it, you will be able to load it with the ``load`` command:"
msgstr "When using the save_ command, you can add a specific location where to store your configuration file. And, when needed it, you will be able to load it with the ``load`` command:"

#: ../../cli.rst:72
msgid "When viewing in page mode the following commands are available:"
msgstr "When viewing in page mode the following commands are available:"

#: ../../cli.rst:370
msgid "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use eithe the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
msgstr "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use eithe the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."

#: ../../cli.rst:479
msgid "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use either the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."
msgstr "You are now in a sublevel relative to ``interfaces ethernet eth0``, all commands executed from this point on are relative to this sublevel. Use either the :cfgcmd:`top` or :cfgcmd:`exit` command to go back to the top of the hierarchy. You can also use the :cfgcmd:`up` command to move only one level up at a time."

#: ../../cli.rst:736
msgid "You can also rename config subtrees:"
msgstr "You can also rename config subtrees:"

#: ../../cli.rst:703
msgid "You can copy and remove configuration subtrees. Suppose you set up a firewall ruleset ``FromWorld`` with one rule that allows traffic from specific subnet. Now you want to setup a similar rule, but for different subnet. Change your edit level to ``firewall name FromWorld`` and use ``copy rule 10 to rule 20``, then modify rule 20."
msgstr "You can copy and remove configuration subtrees. Suppose you set up a firewall ruleset ``FromWorld`` with one rule that allows traffic from specific subnet. Now you want to setup a similar rule, but for different subnet. Change your edit level to ``firewall name FromWorld`` and use ``copy rule 10 to rule 20``, then modify rule 20."

#: ../../cli.rst:943
msgid "You can rollback configuration changes using the rollback command. This will apply the selected revision and trigger a system reboot."
msgstr "You can rollback configuration changes using the rollback command. This will apply the selected revision and trigger a system reboot."

#: ../../cli.rst:58
msgid "You can scroll up with the keys ``[Shift]+[PageUp]`` and scroll down with ``[Shift]+[PageDown]``."
msgstr "You can scroll up with the keys ``[Shift]+[PageUp]`` and scroll down with ``[Shift]+[PageDown]``."

#: ../../cli.rst:613
msgid "You can specify a commit message with :cfgcmd:`commit comment <message>`."
msgstr "You can specify a commit message with :cfgcmd:`commit comment <message>`."

#: ../../cli.rst:860
msgid "You can specify the number of revisions stored on disk. N can be in the range of 0 - 65535. When the number of revisions exceeds the configured value, the oldest revision is removed. The default setting for this value is to store 100 revisions locally."
msgstr "You can specify the number of revisions stored on disk. N can be in the range of 0 - 65535. When the number of revisions exceeds the configured value, the oldest revision is removed. The default setting for this value is to store 100 revisions locally."

#: ../../cli.rst:1005
msgid "You can use the ``save`` and ``load`` commands if you want to manually manage specific configuration files."
msgstr "You can use the ``save`` and ``load`` commands if you want to manually manage specific configuration files."

#: ../../cli.rst:993
msgid "You may find VyOS not allowing the secure connection because it cannot verify the legitimacy of the remote server. You can use the workaround below to quickly add the remote host's SSH fingerprint to your ``~/.ssh/known_hosts`` file:"
msgstr "You may find VyOS not allowing the secure connection because it cannot verify the legitimacy of the remote server. You can use the workaround below to quickly add the remote host's SSH fingerprint to your ``~/.ssh/known_hosts`` file:"

#: ../../cli.rst:1046
msgid "You will be asked if you want to continue. If you accept, you will have to use :cfgcmd:`commit` if you want to make the changes active."
msgstr "You will be asked if you want to continue. If you accept, you will have to use :cfgcmd:`commit` if you want to make the changes active."

#: ../../cli.rst:67
msgid "``b`` will scroll back one page"
msgstr "``b`` will scroll back one page"

#: ../../cli.rst:98
msgid "``clear console`` — clears the screen."
msgstr "``clear console`` — clears the screen."

#: ../../cli.rst:99
msgid "``clear interfaces ethernet eth0 counters`` — zeroes packet counters on ``eth0``."
msgstr "``clear interfaces ethernet eth0 counters`` — zeroes packet counters on ``eth0``."

#: ../../cli.rst:101
msgid "``clear log`` — deletes all system log entries."
msgstr "``clear log`` — deletes all system log entries."

#: ../../cli.rst:156
msgid "``execute wake-on-lan interface <intf> host <MAC>`` — send a Wake-On-LAN packet to a host."
msgstr "``execute wake-on-lan interface <intf> host <MAC>`` — send a Wake-On-LAN packet to a host."

#: ../../cli.rst:142
msgid "``force arp request interface eth1 address 10.3.0.2`` — send a gratuitious ARP request."
msgstr "``force arp request interface eth1 address 10.3.0.2`` — send a gratuitious ARP request."

#: ../../cli.rst:144
msgid "``force root-partition-auto-resize`` — grow the root filesystem to the size of the system partition (this is also done on startup, but this command can do it without a reboot)."
msgstr "``force root-partition-auto-resize`` — grow the root filesystem to the size of the system partition (this is also done on startup, but this command can do it without a reboot)."

#: ../../cli.rst:979
msgid "``ftp://<user>:<passwd>@<host>/<dir>``"
msgstr "``ftp://<user>:<passwd>@<host>/<dir>``"

#: ../../cli.rst:983
msgid "``git+https://<user>:<passwd>@<host>/<path>``"
msgstr "``git+https://<user>:<passwd>@<host>/<path>``"

#: ../../cli.rst:977
msgid "``http://<user>:<passwd>@<host>:/<dir>``"
msgstr "``http://<user>:<passwd>@<host>:/<dir>``"

#: ../../cli.rst:978
msgid "``https://<user>:<passwd>@<host>:/<dir>``"
msgstr "``https://<user>:<passwd>@<host>:/<dir>``"

#: ../../cli.rst:71
msgid "``left-arrow`` and ``right-arrow`` can be used to scroll left or right in the event that the output has lines which exceed the terminal size."
msgstr "``left-arrow`` and ``right-arrow`` can be used to scroll left or right in the event that the output has lines which exceed the terminal size."

#: ../../cli.rst:180
msgid "``monitor log`` — continuously outputs latest system logs."
msgstr "``monitor log`` — continuously outputs latest system logs."

#: ../../cli.rst:65
msgid "``q`` key can be used to cancel output"
msgstr "``q`` key can be used to cancel output"

#: ../../cli.rst:115
msgid "``reset bgp 192.0.2.54`` — terminates the BGP session with neighbor 192.0.2.54."
msgstr "``reset bgp 192.0.2.54`` — terminates the BGP session with neighbor 192.0.2.54."

#: ../../cli.rst:113
msgid "``reset pppoe-server username jsmith`` — terminate all PPPoE sessions from user ``jsmith``."
msgstr "``reset pppoe-server username jsmith`` — terminate all PPPoE sessions from user ``jsmith``."

#: ../../cli.rst:117
msgid "``reset vpn ipsec site-to-site peer vpn.example.com`` — terminates IPsec tunnels to ``vpn.example.com``."
msgstr "``reset vpn ipsec site-to-site peer vpn.example.com`` — terminates IPsec tunnels to ``vpn.example.com``."

#: ../../cli.rst:129
msgid "``restart dhcp server`` — restarts the IPv4 DHCP server process (DHCP requests are not served while it is restarting)."
msgstr "``restart dhcp server`` — restarts the IPv4 DHCP server process (DHCP requests are not served while it is restarting)."

#: ../../cli.rst:131
msgid "``restart ipsec`` — restarts the IPsec process (which forces all sessions and all IPsec process state to reset)."
msgstr "``restart ipsec`` — restarts the IPsec process (which forces all sessions and all IPsec process state to reset)."

#: ../../cli.rst:68
msgid "``return`` will scroll down one line"
msgstr "``return`` will scroll down one line"

#: ../../cli.rst:981
msgid "``scp://<user>:<passwd>@<host>:/<dir>``"
msgstr "``scp://<user>:<passwd>@<host>:/<dir>``"

#: ../../cli.rst:980
msgid "``sftp://<user>:<passwd>@<host>/<dir>``"
msgstr "``sftp://<user>:<passwd>@<host>/<dir>``"

#: ../../cli.rst:169
msgid "``show ip route`` — displays the IPv4 routing table."
msgstr "``show ip route`` — displays the IPv4 routing table."

#: ../../cli.rst:168
msgid "``show system login`` — displays current system users."
msgstr "``show system login`` — displays current system users."

#: ../../cli.rst:66
msgid "``space`` will scroll down one page"
msgstr "``space`` will scroll down one page"

#: ../../cli.rst:982
msgid "``tftp://<host>/<dir>``"
msgstr "``tftp://<host>/<dir>``"

#: ../../cli.rst:69
msgid "``up-arrow`` and ``down-arrow`` will scroll up or down one line at a time respectively"
msgstr "``up-arrow`` and ``down-arrow`` will scroll up or down one line at a time respectively"

#: ../../cli.rst:88
msgid "clear"
msgstr "clear"

#: ../../cli.rst:149
msgid "execute"
msgstr "execute"

#: ../../cli.rst:135
msgid "force"
msgstr "force"

#: ../../cli.rst:172
msgid "monitor"
msgstr "monitor"

#: ../../cli.rst:104
msgid "reset"
msgstr "reset"

#: ../../cli.rst:121
msgid "restart"
msgstr "restart"

#: ../../cli.rst:160
msgid "show"
msgstr "show"