blob: 9c9a1a1eecf2ed2d34593bc18d49842a4c19c4f7 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
|
:lastproofread: 2023-11-07
.. _firewall-global-options-configuration:
#####################################
Global Options Firewall Configuration
#####################################
********
Overview
********
Some firewall settings are global and have an affect on the whole system.
In this section there's useful information about these global-options that can
be configured using vyos cli.
Configuration commands covered in this section:
.. cfgcmd:: set firewall global-options ...
*************
Configuration
*************
.. cfgcmd:: set firewall global-options all-ping [enable | disable]
By default, when VyOS receives an ICMP echo request packet destined for
itself, it will answer with an ICMP echo reply, unless you avoid it
through its firewall.
With the firewall you can set rules to accept, drop or reject ICMP in,
out or local traffic. You can also use the general **firewall all-ping**
command. This command affects only to LOCAL (packets destined for your
VyOS system), not to IN or OUT traffic.
.. note:: **firewall global-options all-ping** affects only to LOCAL
and it always behaves in the most restrictive way
.. code-block:: none
set firewall global-options all-ping enable
When the command above is set, VyOS will answer every ICMP echo request
addressed to itself, but that will only happen if no other rule is
applied dropping or rejecting local echo requests. In case of conflict,
VyOS will not answer ICMP echo requests.
.. code-block:: none
set firewall global-options all-ping disable
When the command above is set, VyOS will answer no ICMP echo request
addressed to itself at all, no matter where it comes from or whether
more specific rules are being applied to accept them.
.. cfgcmd:: set firewall global-options broadcast-ping [enable | disable]
This setting enable or disable the response of icmp broadcast
messages. The following system parameter will be altered:
* ``net.ipv4.icmp_echo_ignore_broadcasts``
.. cfgcmd:: set firewall global-options ip-src-route [enable | disable]
.. cfgcmd:: set firewall global-options ipv6-src-route [enable | disable]
This setting handle if VyOS accept packets with a source route
option. The following system parameter will be altered:
* ``net.ipv4.conf.all.accept_source_route``
* ``net.ipv6.conf.all.accept_source_route``
.. cfgcmd:: set firewall global-options receive-redirects [enable | disable]
.. cfgcmd:: set firewall global-options ipv6-receive-redirects
[enable | disable]
enable or disable of ICMPv4 or ICMPv6 redirect messages accepted
by VyOS. The following system parameter will be altered:
* ``net.ipv4.conf.all.accept_redirects``
* ``net.ipv6.conf.all.accept_redirects``
.. cfgcmd:: set firewall global-options send-redirects [enable | disable]
enable or disable ICMPv4 redirect messages send by VyOS
The following system parameter will be altered:
* ``net.ipv4.conf.all.send_redirects``
.. cfgcmd:: set firewall global-options log-martians [enable | disable]
enable or disable the logging of martian IPv4 packets.
The following system parameter will be altered:
* ``net.ipv4.conf.all.log_martians``
.. cfgcmd:: set firewall global-options source-validation
[strict | loose | disable]
Set the IPv4 source validation mode.
The following system parameter will be altered:
* ``net.ipv4.conf.all.rp_filter``
.. cfgcmd:: set firewall global-options syn-cookies [enable | disable]
Enable or Disable if VyOS use IPv4 TCP SYN Cookies.
The following system parameter will be altered:
* ``net.ipv4.tcp_syncookies``
.. cfgcmd:: set firewall global-options twa-hazards-protection
[enable | disable]
Enable or Disable VyOS to be :rfc:`1337` conforming.
The following system parameter will be altered:
* ``net.ipv4.tcp_rfc1337``
|
