summaryrefslogtreecommitdiff
path: root/data/templates/frr/bgpd.frr.j2
AgeCommit message (Collapse)Author
2025-03-18bgp: T7157: Allow using route-maps for VRF route leaking in BGP (#4404)aapostoliuk
* bgp: T7157: Allow using route-maps for VRF route leaking in BGP Added the possibility of using route-map in route leaking. * Improve the constraint error message --------- Co-authored-by: Daniil Baturin <daniil@baturin.org>
2025-02-13bgp: T7163: add CLI route-map and metric support for "redistribute table"Christian Breunig
* set protocols bgp address-family <ipv4-unicast|ipv6-unicast> redistribute table <n> [metric <n>] [route-map <name>]
2025-02-13bgp: T7161: fix IPv4/IPv6 unicast AFI "redistribute table" commandChristian Breunig
Re-use existing XML constraint added via commit 8f6246da6 ("xml: T7161: provide re-usable building block for alternative routing tables") and add handy CLI completion helper. FRRouting supports redistribution of multiple non-main tables, thus make this a multi node in addition, too.
2024-12-16frr: T6747: migrate protocols to unified FRRender classChristian Breunig
With FRR 10.0 daemons started to be migrated to integrated FRR mgmtd and a northbound interface. This led to some drawbacks in the current state how changes to FRR are handled. The current implementation will use frr-reload.py and specifies excatly WHICH daemon needs a config update and will only replace this part inside FRR. With FRR10 and mgmtd when a partial configuration is sent to mgmtd, it will remove configuration parts from other daemons like bgpd or ospfd which have not yet been migrated to mgmtd. It's not possible to call frr-reload.py with daemon mgmtd - it will error out. This commit will also change the CLI for static routes: CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop source 1.1.1.1" will be split into: * set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd source-address 1.1.1.1 * set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop To make the XML blocks reusable, and comply with the FRR CLI - this was actually a wrong implementation from the beginning as you can not have multiple BFD source addresses. CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop source 1.1.1.1 profile bar" is changed to: * set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd profile bar CLI commands "set protocols static multicast interface-route" is moved to: * set protocols static multicast route <x.x.x.x/x> interface To have an identical look and feel with regular static routes.
2024-12-16frr: T6747: remove superfluous newlines from rendered templatesChristian Breunig
Drop newlines added by macro statement and Jinja2 comments. Jinja2 comments will be removed during package build on the shipped files.
2024-04-02T6196: Fixed applying parameters for aggregation in BGPaapostoliuk
Fixed using 'route-map', 'as-set' and 'summary-only' together in aggregation in BGP
2024-03-29bgp: T6010: Allow configuration of disable-ebgp-connected-route-checkfett0
2024-02-13Merge pull request #2987 from c-po/evpn-macvrf-sooChristian Breunig
bgp: T6032: add EVPN MAC-VRF Site-of-Origin support
2024-02-11bgp: T6032: add EVPN MAC-VRF Site-of-Origin supportChristian Breunig
In some EVPN deployments it is useful to associate a logical VTEP's Layer 2 domain (MAC-VRF) with a Site-of-Origin "site" identifier. This provides a BGP topology-independent means of marking and import-filtering EVPN routes originated from a particular L2 domain. One situation where this is valuable is when deploying EVPN using anycast VTEPs set protocols bgp address-family l2vpn-evpn mac-vrf soo
2024-02-10bgp: T6010: support setting multiple values for neighbor path-attributeChristian Breunig
2024-02-07bgp: T6024: add additional missing FRR featuresChristian Breunig
* set protocols bgp parameters labeled-unicast <explicit-null | ipv4-explicit-null | ipv6-explicit-null> * set protocols bgp parameters allow-martian-nexthop * set protocols bgp parameters no-hard-administrative-reset"
2024-01-14bgp: T591: add VPN nexthop support per address-familyChristian Breunig
set protocols bgp address-family ipv4-unicast nexthop vpn export <ipv4-address|ipv6-address> set protocols bgp address-family ipv6-unicast nexthop vpn export <ipv4-address|ipv6-address>
2024-01-14bgp: T591: add SRv6 per address-family SID supportChristian Breunig
set protocols bgp address-family ipv4-unicast sid vpn export <auto|1-1048575> set protocols bgp address-family ipv6-unicast sid vpn export <auto|1-1048575>
2023-12-14T4163: Add BGP Monitoring Protocol BMP featureViacheslav Hletenko
Add BMP feature. BMP (BGP Monitoring Protocol, RFC 7854) is used to send monitoring data from BGP routers to network management entities https://docs.frrouting.org/en/latest/bmp.html Example: set system frr bmp commit run restart bgp set protocols bgp system-as '65001' set protocols bgp neighbor 192.0.2.11 address-family ipv4-unicast set protocols bgp neighbor 192.0.2.11 remote-as '65001' set protocols bgp bmp mirror-buffer-limit '256000000' set protocols bgp bmp target foo address '127.0.0.1' set protocols bgp bmp target foo port '5000' set protocols bgp bmp target foo min-retry '1000' set protocols bgp bmp target foo max-retry '2000' set protocols bgp bmp target foo mirror set protocols bgp bmp target foo monitor ipv4-unicast post-policy set protocols bgp bmp target foo monitor ipv4-unicast pre-policy set protocols bgp bmp target foo monitor ipv6-unicast post-policy set protocols bgp bmp target foo monitor ipv6-unicast pre-policy
2023-12-11bgp: T591: add SRv6 support from FRRChristian Breunig
set protocols bgp sid vpn per-vrf export '99' set protocols bgp srv6 locator 'foo' set protocols bgp system-as '100' Will generate in FRR config router bgp 100 no bgp ebgp-requires-policy no bgp default ipv4-unicast no bgp network import-check ! segment-routing srv6 locator foo exit sid vpn per-vrf export 99 exit
2023-10-30bgp: T5698: add support for EVPN MultihomingChristian Breunig
2023-09-18bgp: T5596: add new features from FRR 9Christian Breunig
* Add BGP Software Version capability (draft-abraitis-bgp-version-capability) set protocols bgp neighbor 192.0.2.1 capability software-version * Add BGP neighbor path-attribute treat-as-withdraw command set protocols bgp neighbor 192.0.2.1 path-attribute treat-as-withdraw
2023-09-13T5576: Add BGP remove-private-as all optionViacheslav Hletenko
Add the ability to use the option all for remove-private-as. Remove private ASNs in outbound updates. all - Apply to all AS numbers set protocols bgp neighbor <tag> address-family ipv4-unicast remove-private-as all
2023-08-19bgp: T5466: rename type on CLI per-nexhop -> per-nexthop for l3vpn MPLS labelsChristian Breunig
This fixes a CLI typo added in commit 77ef9f800 ("T5466: L3VPN label allocation mode").
2023-08-16 T5466: L3VPN label allocation modefett0
2023-08-07T5446: BGP: change <bgp paramater bestpath med> from node to leafNode, in ↵Nicolas Fort
order to avoid empty value and problems when removing such parameters
2023-07-12bgp: T5338: simplify XML and code handlingChristian Breunig
2023-07-11bgp: T5338: Added 'protocols bgp interface <int> mpls forwarding' featureaapostoliuk
Added 'protocols bgp interface <int> mpls forwarding' feature. It is possible to permit BGP install VPN prefixes without transport labels. This configuration will install VPN prefixes originated from an e-bgp session, and with the next-hop directly connected.
2023-05-19T5230: remove trailing tabs causing j2lint errorJohn Estabrook
2023-05-19T5230: Added missing enforce-first-as option to bgp protocol common config ↵Wered
and frr bgp jinja template.
2023-04-27bgp: T5010: fix for-loop copy/paste errorChristian Breunig
Commit 923d7f1d7 (bgp: T5010: add missing for-loop when iterating over "both" route-target) referenced export rt instead of both. This happened while improperly copy-pasting the line.
2023-04-27bgp: T5010: add missing for-loop when iterating over "both" route-targetChristian Breunig
2023-03-27bgp: T5114: support configuring TCP keepalive messagesChristian Breunig
2023-03-27bgp: T5114: add "neighbor path-attribute discard"Christian Breunig
2023-02-12T5001: Replace links to the phabricator siteChristian Breunig
Replace links to the phabricator site from https://phabricator.vyos.net to https://vyos.dev
2023-02-04T4817, Corrected formatting.Kyle McClammy
2023-02-04T4817 added support for RFC 9234Kyle McClammy
2023-01-30T4964: Fix template bgpd.frr.j2 for l2vpn vni route-targetsViacheslav Hletenko
Route-target export/import for l2vpn-evpn vni xxx works as leafNode with multiple values We have to use "for" for such values
2022-12-02 T4854: route reflector allows to apply route-mapsfett0
2022-09-30bgp: evpn: T1315: add route-target CLI node <multi/> propertyChristian Poessinger
FRR supports multiple route-targets to be used for import/export: address-family l2vpn evpn route-target import 20:10 route-target import 20:11 route-target import 20:12 route-target import 40:40 route-target export 1:2 route-target export 1:3 route-target export 40:40 exit-address-family Thus the <multi/> property is added to the relevant CLI nodes.
2022-09-15bgp: T4696: add support for "bestpath peer-type multipath-relax"Christian Poessinger
Add new VyOS CLI command: set protocols bgp parameters bestpath peer-type multipath-relax This command specifies that BGP decision process should consider paths from all peers for multipath computation. If this option is enabled, paths learned from any of eBGP, iBGP, or confederation neighbors will be multipath if they are otherwise considered equal cost. [1] [1]: http://docs.frrouting.org/en/stable-8.3/bgp.html#clicmd-bgp-bestpath-peer-type-multipath-relax
2022-08-22BGP: T4634: Allow configuration of disable-connected-checkSander Klein
2022-07-30bgp: T4257: Changing BGP "local-as" to "system-as"Cheeze_It
bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor. bgp: T4257: Changing BGP "local-as" to "system-as" bgp: T4257: Changing BGP "local-as" to "system-as" This change is to change the global BGP name for the node "local-as" to "system-as" This is needed so that there's less ambiguity with the local-as feature per neighbor.
2022-04-14frr: T4353: fix Jinja2 linting errorsChristian Poessinger
generated by cgit v1.2.3 (git 2.39.1) at 2025-09-03 00:46:41 +0000