| Age | Commit message (Collapse) | Author |
|---|
|
* snmp: T7180: Fixed verification of engineid in snmpv3
EngineID must be configured if snmpv3 user is configured.
Fixed engineid help string.
|
|
Some systemd services are re-used over multiple configuration files. Keep a
single source of the real systemd names and only reference them by dictionary
keys.
|
|
With FRR 10.0 daemons started to be migrated to integrated FRR mgmtd and a
northbound interface. This led to some drawbacks in the current state how
changes to FRR are handled. The current implementation will use frr-reload.py
and specifies excatly WHICH daemon needs a config update and will only replace
this part inside FRR.
With FRR10 and mgmtd when a partial configuration is sent to mgmtd, it will
remove configuration parts from other daemons like bgpd or ospfd which have
not yet been migrated to mgmtd.
It's not possible to call frr-reload.py with daemon mgmtd - it will error out.
This commit will also change the CLI for static routes:
CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
source 1.1.1.1" will be split into:
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd source-address 1.1.1.1
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
To make the XML blocks reusable, and comply with the FRR CLI - this was actually
a wrong implementation from the beginning as you can not have multiple BFD
source addresses.
CLI command "set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd multi-hop
source 1.1.1.1 profile bar" is changed to:
* set protocols static route 10.0.0.0/8 next-hop 1.2.3.4 bfd profile bar
CLI commands "set protocols static multicast interface-route" is moved to:
* set protocols static multicast route <x.x.x.x/x> interface
To have an identical look and feel with regular static routes.
|
|
|
|
|
|
Do no longer use my_set and my_delete as this prevents scripts beeing run under
supervision of vyos-configd.
|
|
We will use _ as CLI level divider. The XML definition filename and also
the Python helper should match the CLI node.
Example:
set interfaces ethernet -> interfaces_ethernet.xml.in
set interfaces bond -> interfaces_bond.xml.in
set service dhcp-server -> service_dhcp-server-xml.in
|
