Always use lower case for our local include file names.

clang-format doesn't allow you to specify an include sort order, and
just assumes asciibetical is a pretty good order, which doesn't work as
well as you would hope.

This makes them all lower case so they don't need to be re-sorted.

I also went through and checked that we're using quoted local includes
at all the appropriate places.

Signed-off-by: Peter Jones <pjones@redhat.com>

1 files changed, 0 insertions, 361 deletions

diff --git a/include/Ip6Config.h b/include/Ip6Config.h
deleted file mode 100644
index f99ce013..00000000
--- a/include/Ip6Config.h
+++ /dev/null
@@ -1,361 +0,0 @@
-/** @file
-  This file provides a definition of the EFI IPv6 Configuration
-  Protocol.
-
-Copyright (c) 2008 - 2011, Intel Corporation. All rights reserved.<BR>
-This program and the accompanying materials
-are licensed and made available under the terms and conditions of the BSD License
-which accompanies this distribution.  The full text of the license may be found at<BR>
-http://opensource.org/licenses/bsd-license.php
-
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-#ifndef SHIM_IP6CONFIG_H
-#define SHIM_IP6CONFIG_H
-
-#include <efiip.h>
-
-typedef struct _EFI_IP6_CONFIG_PROTOCOL EFI_IP6_CONFIG_PROTOCOL;
-
-///
-/// EFI_IP6_CONFIG_DATA_TYPE
-///
-typedef enum {
-  ///
-  /// The interface information of the communication
-  /// device this EFI IPv6 Configuration Protocol instance manages.
-  /// This type of data is read only.The corresponding Data is of type
-  /// EFI_IP6_CONFIG_INTERFACE_INFO.
-  ///
-  Ip6ConfigDataTypeInterfaceInfo,
-  ///
-  /// The alternative interface ID for the
-  /// communication device this EFI IPv6 Configuration Protocol
-  /// instance manages if the link local IPv6 address generated from
-  /// the interfaced ID based on the default source the EFI IPv6
-  /// Protocol uses is a duplicate address. The length of the interface
-  /// ID is 64 bit. The corresponding Data is of type
-  /// EFI_IP6_CONFIG_INTERFACE_ID.
-  ///
-  Ip6ConfigDataTypeAltInterfaceId,
-  ///
-  /// The general configuration policy for the EFI IPv6 network
-  /// stack running on the communication device this EFI IPv6
-  /// Configuration Protocol instance manages. The policy will affect
-  /// other configuration settings. The corresponding Data is of type
-  /// EFI_IP6_CONFIG_POLICY.
-  ///
-  Ip6ConfigDataTypePolicy,
-  ///
-  /// The number of consecutive
-  /// Neighbor Solicitation messages sent while performing Duplicate
-  /// Address Detection on a tentative address. A value of zero
-  /// indicates that Duplicate Address Detection will not be performed
-  /// on tentative addresses. The corresponding Data is of type
-  /// EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS.
-  ///
-  Ip6ConfigDataTypeDupAddrDetectTransmits,
-  ///
-  /// The station addresses set manually for the EFI
-  /// IPv6 network stack. It is only configurable when the policy is
-  /// Ip6ConfigPolicyManual. The corresponding Data is a
-  /// pointer to an array of EFI_IPv6_ADDRESS instances.
-  ///
-  Ip6ConfigDataTypeManualAddress,
-  ///
-  /// The gateway addresses set manually for the EFI IPv6
-  /// network stack running on the communication device this EFI
-  /// IPv6 Configuration Protocol manages. It is not configurable when
-  /// the policy is Ip6ConfigPolicyAutomatic. The gateway
-  /// addresses must be unicast IPv6 addresses. The corresponding
-  /// Data is a pointer to an array of EFI_IPv6_ADDRESS instances.
-  ///
-  Ip6ConfigDataTypeGateway,
-  ///
-  /// The DNS server list for the EFI IPv6 network stack
-  /// running on the communication device this EFI IPv6
-  /// Configuration Protocol manages. It is not configurable when the
-  /// policy is Ip6ConfigPolicyAutomatic.The DNS server
-  /// addresses must be unicast IPv6 addresses. The corresponding
-  /// Data is a pointer to an array of EFI_IPv6_ADDRESS instances.
-  ///
-  Ip6ConfigDataTypeDnsServer,
-  ///
-  /// The number of this enumeration memebers.
-  ///
-  Ip6ConfigDataTypeMaximum
-} EFI_IP6_CONFIG_DATA_TYPE;
-
-///
-/// EFI_IP6_CONFIG_INTERFACE_INFO
-/// describes the operational state of the interface this
-/// EFI IPv6 Configuration Protocol instance manages.
-///
-typedef struct {
-  ///
-  /// The name of the interface. It is a NULL-terminated string.
-  ///
-  CHAR16                Name[32];
-  ///
-  /// The interface type of the network interface.
-  ///
-  UINT8                 IfType;
-  ///
-  /// The size, in bytes, of the network interface's hardware address.
-  ///
-  UINT32                HwAddressSize;
-  ///
-  /// The hardware address for the network interface.
-  ///
-  EFI_MAC_ADDRESS       HwAddress;
-  ///
-  /// Number of EFI_IP6_ADDRESS_INFO structures pointed to by AddressInfo.
-  ///
-  UINT32                AddressInfoCount;
-  ///
-  /// Pointer to an array of EFI_IP6_ADDRESS_INFO instances
-  /// which contain the local IPv6 addresses and the corresponding
-  /// prefix length information. Set to NULL if AddressInfoCount
-  /// is zero.
-  ///
-  EFI_IP6_ADDRESS_INFO  *AddressInfo;
-  ///
-  /// Number of route table entries in the following RouteTable.
-  ///
-  UINT32                RouteCount;
-  ///
-  /// The route table of the IPv6 network stack runs on this interface.
-  /// Set to NULL if RouteCount is zero.
-  ///
-  EFI_IP6_ROUTE_TABLE   *RouteTable;
-} EFI_IP6_CONFIG_INTERFACE_INFO;
-
-///
-/// EFI_IP6_CONFIG_INTERFACE_ID
-/// describes the 64-bit interface ID.
-///
-typedef struct {
-  UINT8                 Id[8];
-} EFI_IP6_CONFIG_INTERFACE_ID;
-
-///
-/// EFI_IP6_CONFIG_POLICY
-/// defines the general configuration policy the EFI IPv6
-/// Configuration Protocol supports.
-///
-typedef enum {
-  ///
-  /// Under this policy, the IpI6ConfigDataTypeManualAddress,
-  /// Ip6ConfigDataTypeGateway and Ip6ConfigDataTypeDnsServer
-  /// configuration data are required to be set manually.
-  /// The EFI IPv6 Protocol will get all required configuration
-  /// such as address, prefix and gateway settings from the EFI
-  /// IPv6 Configuration protocol.
-  ///
-  Ip6ConfigPolicyManual,
-  ///
-  /// Under this policy, the IpI6ConfigDataTypeManualAddress,
-  /// Ip6ConfigDataTypeGateway and Ip6ConfigDataTypeDnsServer
-  /// configuration data are not allowed to set via SetData().
-  /// All of these configurations are retrieved from some auto
-  /// configuration mechanism.
-  /// The EFI IPv6 Protocol will use the IPv6 stateless address
-  /// autoconfiguration mechanism and/or the IPv6 stateful address
-  /// autoconfiguration mechanism described in the related RFCs to
-  /// get address and other configuration information
-  ///
-  Ip6ConfigPolicyAutomatic
-} EFI_IP6_CONFIG_POLICY;
-
-///
-/// EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS
-/// describes the number of consecutive Neighbor Solicitation messages sent
-/// while performing Duplicate Address Detection on a tentative address.
-/// The default value for a newly detected communication device is 1.
-///
-typedef struct {
-  UINT32    DupAddrDetectTransmits;  ///< The number of consecutive Neighbor Solicitation messages sent.
-} EFI_IP6_CONFIG_DUP_ADDR_DETECT_TRANSMITS;
-
-///
-/// EFI_IP6_CONFIG_MANUAL_ADDRESS
-/// is used to set the station address information for the EFI IPv6 network
-/// stack manually when the policy is Ip6ConfigPolicyManual.
-///
-typedef struct {
-  EFI_IPv6_ADDRESS      Address;       ///< The IPv6 unicast address.
-  BOOLEAN               IsAnycast;     ///< Set to TRUE if Address is anycast.
-  UINT8                 PrefixLength;  ///< The length, in bits, of the prefix associated with this Address.
-} EFI_IP6_CONFIG_MANUAL_ADDRESS;
-
-
-/**
-  Set the configuration for the EFI IPv6 network stack running on the communication
-  device this EFI IPv6 Configuration Protocol instance manages.
-
-  This function is used to set the configuration data of type DataType for the EFI
-  IPv6 network stack running on the communication device this EFI IPv6 Configuration
-  Protocol instance manages.
-
-  The DataSize is used to calculate the count of structure instances in the Data for
-  some DataType that multiple structure instances are allowed.
-
-  This function is always non-blocking. When setting some type of configuration data,
-  an asynchronous process is invoked to check the correctness of the data, such as
-  doing Duplicate Address Detection on the manually set local IPv6 addresses.
-  EFI_NOT_READY is returned immediately to indicate that such an asynchronous process
-  is invoked and the process is not finished yet. The caller willing to get the result
-  of the asynchronous process is required to call RegisterDataNotify() to register an
-  event on the specified configuration data. Once the event is signaled, the caller
-  can call GetData() to get back the configuration data in order to know the result.
-  For other types of configuration data that do not require an asynchronous configuration
-  process, the result of the operation is immediately returned.
-
-  @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
-  @param[in]     DataType       The type of data to set.
-  @param[in]     DataSize       Size of the buffer pointed to by Data in bytes.
-  @param[in]     Data           The data buffer to set. The type of the data buffer is
-                                associated with the DataType.
-
-  @retval EFI_SUCCESS           The specified configuration data for the EFI IPv6
-                                network stack is set successfully.
-  @retval EFI_INVALID_PARAMETER One or more of the following are TRUE:
-                                - This is NULL.
-                                - Data is NULL.
-                                - One or more fields in Data do not match the requirement of the
-                                  data type indicated by DataType.
-  @retval EFI_WRITE_PROTECTED   The specified configuration data is read-only or the specified
-                                configuration data can not be set under the current policy
-  @retval EFI_ACCESS_DENIED     Another set operation on the specified configuration
-                                data is already in process.
-  @retval EFI_NOT_READY         An asynchronous process is invoked to set the specified
-                                configuration data and the process is not finished yet.
-  @retval EFI_BAD_BUFFER_SIZE   The DataSize does not match the size of the type
-                                indicated by DataType.
-  @retval EFI_UNSUPPORTED       This DataType is not supported.
-  @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
-  @retval EFI_DEVICE_ERROR      An unexpected system error or network error occurred.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_IP6_CONFIG_SET_DATA)(
-  IN EFI_IP6_CONFIG_PROTOCOL    *This,
-  IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
-  IN UINTN                      DataSize,
-  IN VOID                       *Data
-  );
-
-/**
-  Get the configuration data for the EFI IPv6 network stack running on the communication
-  device this EFI IPv6 Configuration Protocol instance manages.
-
-  This function returns the configuration data of type DataType for the EFI IPv6 network
-  stack running on the communication device this EFI IPv6 Configuration Protocol instance
-  manages.
-
-  The caller is responsible for allocating the buffer used to return the specified
-  configuration data and the required size will be returned to the caller if the size of
-  the buffer is too small.
-
-  EFI_NOT_READY is returned if the specified configuration data is not ready due to an
-  already in progress asynchronous configuration process. The caller can call RegisterDataNotify()
-  to register an event on the specified configuration data. Once the asynchronous configuration
-  process is finished, the event will be signaled and a subsequent GetData() call will return
-  the specified configuration data.
-
-  @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
-  @param[in]     DataType       The type of data to get.
-  @param[in,out] DataSize       On input, in bytes, the size of Data. On output, in bytes, the
-                                size of buffer required to store the specified configuration data.
-  @param[in]     Data           The data buffer in which the configuration data is returned. The
-                                type of the data buffer is associated with the DataType.
-
-  @retval EFI_SUCCESS           The specified configuration data is got successfully.
-  @retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:
-                                - This is NULL.
-                                - DataSize is NULL.
-                                - Data is NULL if *DataSize is not zero.
-  @retval EFI_BUFFER_TOO_SMALL  The size of Data is too small for the specified configuration data
-                                and the required size is returned in DataSize.
-  @retval EFI_NOT_READY         The specified configuration data is not ready due to an already in
-                                progress asynchronous configuration process.
-  @retval EFI_NOT_FOUND         The specified configuration data is not found.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_IP6_CONFIG_GET_DATA)(
-  IN EFI_IP6_CONFIG_PROTOCOL    *This,
-  IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
-  IN OUT UINTN                  *DataSize,
-  IN VOID                       *Data   OPTIONAL
-  );
-
-/**
-  Register an event that is to be signaled whenever a configuration process on the specified
-  configuration data is done.
-
-  This function registers an event that is to be signaled whenever a configuration process
-  on the specified configuration data is done. An event can be registered for different DataType
-  simultaneously and the caller is responsible for determining which type of configuration data
-  causes the signaling of the event in such case.
-
-  @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
-  @param[in]     DataType       The type of data to unregister the event for.
-  @param[in]     Event          The event to register.
-
-  @retval EFI_SUCCESS           The notification event for the specified configuration data is
-                                registered.
-  @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
-  @retval EFI_UNSUPPORTED       The configuration data type specified by DataType is not
-                                supported.
-  @retval EFI_OUT_OF_RESOURCES  Required system resources could not be allocated.
-  @retval EFI_ACCESS_DENIED     The Event is already registered for the DataType.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_IP6_CONFIG_REGISTER_NOTIFY)(
-  IN EFI_IP6_CONFIG_PROTOCOL    *This,
-  IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
-  IN EFI_EVENT                  Event
-  );
-
-/**
-  Remove a previously registered event for the specified configuration data.
-
-  This function removes a previously registered event for the specified configuration data.
-
-  @param[in]     This           Pointer to the EFI_IP6_CONFIG_PROTOCOL instance.
-  @param[in]     DataType       The type of data to remove the previously registered event for.
-  @param[in]     Event          The event to unregister.
-
-  @retval EFI_SUCCESS           The event registered for the specified configuration data is removed.
-  @retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.
-  @retval EFI_NOT_FOUND         The Event has not been registered for the specified
-                                DataType.
-
-**/
-typedef
-EFI_STATUS
-(EFIAPI *EFI_IP6_CONFIG_UNREGISTER_NOTIFY)(
-  IN EFI_IP6_CONFIG_PROTOCOL    *This,
-  IN EFI_IP6_CONFIG_DATA_TYPE   DataType,
-  IN EFI_EVENT                  Event
-  );
-
-///
-/// The EFI_IP6_CONFIG_PROTOCOL provides the mechanism to set and get various
-/// types of configurations for the EFI IPv6 network stack.
-///
-struct _EFI_IP6_CONFIG_PROTOCOL {
-  EFI_IP6_CONFIG_SET_DATA           SetData;
-  EFI_IP6_CONFIG_GET_DATA           GetData;
-  EFI_IP6_CONFIG_REGISTER_NOTIFY    RegisterDataNotify;
-  EFI_IP6_CONFIG_UNREGISTER_NOTIFY  UnregisterDataNotify;
-};
-
-#endif /* SHIM_IP6CONFIG_H */