Adding live-initramfs 1.87.2-1.

1 files changed, 0 insertions, 549 deletions

diff --git a/scripts/casper b/scripts/casper
deleted file mode 100755
index a4c78b3..0000000
--- a/scripts/casper
+++ /dev/null
@@ -1,549 +0,0 @@
-#!/bin/sh
-
-# set -e
-
-export PATH=/root/usr/bin:/root/usr/sbin:/root/bin:/root/sbin:/usr/bin:/usr/sbin:/bin:/sbin
-
-echo "/root/lib" >> /etc/ld.so.conf
-echo "/root/usr/lib" >> /etc/ld.so.conf
-
-mountpoint=/cdrom
-
-USERNAME=casper
-USERFULLNAME="Live session user"
-HOST=live
-BUILD_SYSTEM=Custom
-
-mkdir -p $mountpoint
-
-[ -f /etc/casper.conf ] && . /etc/casper.conf
-export USERNAME USERFULLNAME HOST BUILD_SYSTEM
-
-. /scripts/casper-helpers
-
-if [ ! -f /casper.vars ]; then
-    touch /casper.vars
-fi
-
-is_casper_path() {
-    path=$1
-    if [ -d "$path/casper" ]; then
-        if [ "$(echo $path/casper/*.squashfs)" != "$path/casper/*.squashfs" ] ||
-            [ "$(echo $path/casper/*.ext2)" != "$path/casper/*.ext2" ] ||
-            [ "$(echo $path/casper/*.dir)" != "$path/casper/*.dir" ]; then
-            return 0
-        fi
-    fi
-    return 1
-}
-
-get_backing_device() {
-    case "$1" in
-        *.squashfs|*.ext2)
-            echo $(setup_loop "$1" "loop" "/sys/block/loop*")
-            ;;
-        *.dir)
-            echo "directory"
-            ;;
-        *)
-            panic "Unrecognized casper filesystem: $1"
-            ;;
-    esac
-}
-
-match_files_in_dir() {
-    # Does any files match pattern $1 ?
-
-    local pattern="$1"
-    if [ "$(echo $pattern)" != "$pattern" ]; then
-        return 0
-    fi
-    return 1
-}
-
-mount_images_in_directory() {
-    directory="$1"
-    rootmnt="$2"
-    if match_files_in_dir "$directory/casper/*.squashfs" ||
-        match_files_in_dir "$directory/casper/*.ext2" ||
-        match_files_in_dir "$directory/casper/*.dir"; then
-        setup_unionfs "$directory/casper" "$rootmnt"
-    else
-        :
-    fi
-}
-
-is_nice_device() {
-    sysfs_path="${1#/sys}"
-    if /lib/udev/path_id "${sysfs_path}" | grep -E -q "ID_PATH=(usb|pci-[^-]*-[ide|scsi|usb])"; then
-        return 0
-    fi
-    return 1
-}
-
-is_supported_fs () {
-    # FIXME: do something better like the scan of supported filesystems
-    fstype="${1}"
-    case ${fstype} in
-        vfat|iso9660|udf|ext2|ext3|ntfs)
-            return 0
-            ;;
-    esac
-    return 1
-}
-
-copy_live_to() {
-    copyfrom="${1}"
-    copytodev="${2}"
-    copyto="${copyfrom}_swap"
-
-    size=$(fs_size "" ${copyfrom} "used")
-
-    if [ "${copytodev}" = "ram" ]; then
-        # copying to ram:
-        freespace=$( expr $(awk '/MemFree/{print $2}' /proc/meminfo) + $( cat /proc/meminfo | grep Cached | head -n 1 | awk '/Cached/{print $2}' - ) )
-        mount_options="-o size=${size}k"
-        free_string="memory"
-        fstype="tmpfs"
-        dev="/dev/shm"
-    else
-        # it should be a writable block device
-        if [ -b "${copytodev}" ]; then
-            dev="${copytodev}"
-            free_string="space"
-            fstype=$(get_fstype "${dev}")
-            freespace=$(fs_size "${dev}")
-        else
-            [ "$quiet" != "y" ] && log_warning_msg "${copytodev} is not a block device."
-            return 1
-        fi
-    fi
-    if [ "${freespace}" -lt "${size}" ] ; then
-        [ "$quiet" != "y" ] && log_warning_msg "Not enough free ${free_string} (${freespace}k > ${size}k) to copy live media in ${copytodev}."
-        return 1
-    fi
-
-    # begin copying..
-    mkdir "${copyto}"
-    echo "mount -t ${fstype} ${mount_options} ${dev} ${copyto}"
-    mount -t "${fstype}" ${mount_options} "${dev}" "${copyto}"
-    cp -a ${copyfrom}/* ${copyto} # "cp -a" from busybox also copies hidden files
-    umount ${copyfrom}
-    mount -r -o move ${copyto} ${copyfrom}
-    rmdir ${copyto}
-    return 0
-}
-
-do_netmount() {
-    rc=1
-
-    modprobe "${MP_QUIET}" af_packet # For DHCP
-
-    udevtrigger
-    udevsettle
-
-    ipconfig ${DEVICE} /tmp/net-${DEVICE}.conf | tee /netboot.config
-
-    if [ "${NFSROOT}" = "auto" ]; then
-        NFSROOT=${ROOTSERVER}:${ROOTPATH}
-    fi
-
-    [ "$quiet" != "y" ] && log_begin_msg "Trying netboot from ${NFSROOT}"
-
-    if [ "${NETBOOT}" != "nfs" ] && do_cifsmount ; then
-        rc=0
-    elif do_nfsmount ; then
-        NETBOOT="nfs"
-        export NETBOOT
-        rc=0
-    fi
-
-    [ "$quiet" != "y" ] && log_end_msg
-    return ${rc}
-}
-
-do_nfsmount() {
-    rc=1
-    modprobe "${MP_QUIET}" nfs
-    if [ -z "${NFSOPTS}" ]; then
-        NFSOPTS=""
-    fi
-
-    [ "$quiet" != "y" ] && log_begin_msg "Trying nfsmount -o nolock -o ro ${NFSOPTS} ${NFSROOT} ${mountpoint}"
-    # FIXME: This for loop is an ugly HACK round an nfs bug
-    for i in 0 1 2 3 4 5 6 7 8 9 a b c d e f 10 11 12 13; do
-        nfsmount -o nolock -o ro ${NFSOPTS} "${NFSROOT}" "${mountpoint}" && rc=0 && break
-        sleep 1
-    done
-    return ${rc}
-}
-
-do_cifsmount() {
-    rc=1
-    if [ -x "/sbin/mount.cifs" ]; then
-        if [ -z "${NFSOPTS}" ]; then
-            CIFSOPTS="-ouser=root,password="
-        else
-            CIFSOPTS="${NFSOPTS}"
-        fi
-
-        [ "$quiet" != "y" ] && log_begin_msg "Trying mount.cifs ${NFSROOT} ${mountpoint} ${CIFSOPTS}"
-        modprobe "${MP_QUIET}" cifs
-
-        if mount.cifs "${NFSROOT}" "${mountpoint}" "${CIFSOPTS}" ; then
-            rc=0
-        fi
-    fi
-    return ${rc}
-}
-
-do_snap_copy ()
-{
-    fromdev="${1}"
-    todir="${2}"
-    snap_type="${3}"
-
-    size=$(fs_size "${fromdev}" "" "used")
-
-    if [ -b "${fromdev}" ]; then
-        # look for free mem
-        if [ -n "${HOMEMOUNTED}" -a "${snap_type}" = "HOME" ]; then
-            todev=$(cat /proc/mounts | grep -s " $(base_path ${todir}) " | awk '{print $1}' )
-            freespace=$(df -k  | grep -s ${todev} | awk '{print $4}')
-        else
-            freespace=$( expr $(awk '/MemFree/{print $2}' /proc/meminfo) + $( cat /proc/meminfo | grep Cached | head -n 1 | awk '/Cached/{print $2}' - ))
-        fi
-
-        tomount="/mnt/tmpsnap"
-        if [ ! -d "${tomount}" ] ; then
-            mkdir -p "${tomount}"
-        fi
-
-        fstype=$(get_fstype "${fromdev}")
-        if [ -n "${fstype}" ]; then
-            # Copying stuff...
-            mount -t "${fstype}" -o ro "${fromdev}" "${tomount}"
-            cp -a "${tomount}"/* ${todir}
-            umount "${tomount}"
-        else
-            log_warning_msg "Unrecognized fstype: ${fstype} on ${fromdev}:${snap_type}"
-        fi
-
-        rmdir "${tomount}"
-        if echo ${fromdev} | grep -qs loop; then
-           losetup -d "${fromdev}"
-        fi
-        return 0
-    else
-        return 1
-        [ "$quiet" != "y" ] && log_warning_msg "Unable to find the snapshot ${snap_type} medium"
-    fi
-}
-
-try_snap ()
-{
-    # Look for $snap_label.* in block devices and copy the contents to $snap_mount
-    #   and remember the device and filename for resync on exit in casper.init
-
-    snap_label="${1}"
-    snap_mount="${2}"
-    snap_type="${3}"
-
-    snapdata=$(find_files "${snap_label}.squashfs ${snap_label}.cpio.gz ${snap_label}.ext2")
-    if [ ! -z "${snapdata}" ]; then
-        snapdev="$(echo ${snapdata} | cut -f1 -d ' ')"
-        snapback="$(echo ${snapdata} | cut -f2 -d ' ')"
-        snapfile="$(echo ${snapdata} | cut -f3 -d ' ')"
-        if echo "${snapfile}" | grep -qs '\(squashfs\|ext2\)'; then
-            # squashfs or ext2 snapshot
-            dev=$(get_backing_device "${snapback}/${snapfile}")
-            if ! do_snap_copy "${dev}" "${snap_mount}" "${snap_type}"; then
-                 log_warning_msg "Impossible to include the ${snapfile} Snapshot"
-                 return 1
-            fi
-        else
-            # cpio.gz snapshot
-            if ! (cd "${snap_mount}" && zcat "${snapback}/${snapfile}" | cpio -i -u -d 2>/dev/null) ; then
-                log_warning_msg "Impossible to include the ${snapfile} Snapshot"
-                return 1
-            fi
-        fi
-        umount "${snapback}"
-    else
-        dev=$(find_cow_device "${snap_label}")
-        if [ -b ${dev} ]; then
-            if echo "${dev}" | grep -qs loop; then
-                # strange things happens, user confused?
-                snaploop=$( losetup ${dev} | awk '{print $3}' | tr -d '()' )
-                snapfile=$(basename ${snaploop})
-                snapdev=$(cat /proc/mounts | awk '{print $2,$1}' | grep -es "^$( dirname ${snaploop} )" | cut -f2 -d ' ')
-            else
-                snapdev="${dev}"
-            fi
-            if ! do_snap_copy "${dev}" "${snap_mount}" "${snap_type}" ; then
-                log_warning_msg "Impossible to include the ${snap_label} Snapshot"
-                return 1
-            else
-                if [ -n "${snapfile}" ]; then
-                     # it was a loop device, user confused
-                     umount ${snapdev}
-                fi
-            fi
-        else
-            log_warning_msg "Impossible to include the ${snap_label} Snapshot"
-            return 1
-        fi
-    fi
-    echo "export ${snap_type}SNAP="${snap_mount}":${snapdev}:${snapfile}" >> /etc/casper.conf # for resync on reboot/halt
-    return 0
-}
-
-setup_unionfs() {
-    image_directory="$1"
-    rootmnt="$2"
-
-    modprobe "${MP_QUIET}" -b unionfs
-
-    # run-init can't deal with images in a subdir, but we're going to
-    # move all of these away before it runs anyway.  No, we're not,
-    # put them in / since move-mounting them into / breaks mono and
-    # some other apps.
-
-    croot="/"
-
-    # Let's just mount the read-only file systems first
-    rofsstring=""
-    rofslist=""
-    if [ "${NETBOOT}" = "nfs" ] ; then
-        roopt="nfsro" # go aroung a bug in nfs-unionfs locking
-    else
-        roopt="ro"
-    fi
-
-    mkdir -p "${croot}"
-    for image_type in "ext2" "squashfs" "dir" ; do
-        for image in "${image_directory}"/*."${image_type}"; do
-            imagename=$(basename "${image}")
-            if [ -d "${image}" ]; then
-                # it is a plain directory: do nothing
-                rofsstring="${image}=${roopt}:${rofsstring}"
-                rofslist="${image} ${rofslist}"
-            elif [ -f "${image}" ]; then
-                backdev=$(get_backing_device "$image")
-                fstype=$(get_fstype "${backdev}")
-                if [ "${fstype}" = "unknown" ]; then
-                    panic "Unknown file system type on ${backdev} (${image})"
-                fi
-                mkdir -p "${croot}/${imagename}"
-                mount -t "${fstype}" -o ro "${backdev}" "${croot}/${imagename}" || panic "Can not mount $backdev ($image) on ${croot}/${imagename}" && rofsstring="${croot}/${imagename}=${roopt}:${rofsstring}" && rofslist="${croot}/${imagename} ${rofslist}"
-            fi
-        done
-    done
-    rofsstring=${rofsstring%:}
-
-    mkdir -p /cow
-    cowdevice="tmpfs"
-    cow_fstype="tmpfs"
-
-    # Looking for "${root_persistence}" device or file
-    if [ -n "${PERSISTENT}" ]; then
-        cowprobe=$(find_cow_device "${root_persistence}")
-        if [ -b "${cowprobe}" ]; then
-            cowdevice=${cowprobe}
-            cow_fstype=$(get_fstype "${cowprobe}")
-        else
-            [ "$quiet" != "y" ] && log_warning_msg "Unable to find the persistent medium"
-        fi
-    fi
-
-    mount ${cowdevice} -t ${cow_fstype} -o rw /cow || panic "Can not mount $cowdevice on /cow"
-
-    mount -t unionfs -o dirs=/cow=rw:$rofsstring unionfs "$rootmnt" || panic "Unionfs mount failed"
-
-    # Adding other custom mounts
-    if [ -n "${PERSISTENT}" ]; then
-        # directly mount /home
-        # FIXME: add a custom mounts configurable system
-        homecow=$(find_cow_device "${home_persistence}" )
-        if [ -b "${homecow}" ]; then
-            mount -t $(get_fstype "${homecow}") -o rw "${homecow}" "${rootmnt}/home"
-            export HOMEMOUNTED=1 # used to proper calculate free space in do_snap_copy()
-        else
-            [ "$quiet" != "y" ] && log_warning_msg "Unable to find the persistent home medium"
-        fi
-        # Look for other snapshots to copy in
-        try_snap "${root_snapshot_label}" "${rootmnt}" "ROOT"
-        try_snap "${home_snapshot_label}" "${rootmnt}/home" "HOME"
-    fi
-
-    if [ -n "${SHOWMOUNTS}" ]; then
-        for d in ${rofslist}; do
-            mkdir -p "${rootmnt}/casper/${d##*/}"
-            case d in
-                *.dir) # do nothing # mount -o bind "${d}" "${rootmnt}/casper/${d##*/}"
-                    ;;
-                *) mount -o move "${d}" "${rootmnt}/casper/${d##*/}"
-                    ;;
-            esac
-        done
-        # shows cow fs on /cow for use by casper-snapshot
-        mkdir -p "${rootmnt}/cow"
-        mount -o bind /cow "${rootmnt}/cow"
-    fi
-
-    # move the first mount; no head in busybox-initramfs
-    for d in $(mount -t squashfs | cut -d\  -f 3); do
-        mkdir -p "${rootmnt}/rofs"
-        mount -o move "${d}" "${rootmnt}/rofs"
-        break
-    done
-}
-
-check_dev ()
-{
-    sysdev="${1}"
-    devname="${2}"
-    if [ -z "${devname}" ]; then
-        devname=$(sys2dev "${sysdev}")
-    fi
-
-    if [ -n "${LIVEMEDIA_OFFSET}" ]; then
-        loopdevname=$(setup_loop "${devname}" "loop" "/sys/block/loop*" "${LIVEMEDIA_OFFSET}")
-        devname="${loopdevname}" 
-    fi
-
-    fstype=$(get_fstype "${devname}")
-    if is_supported_fs ${fstype}; then
-        mount -t ${fstype} -o ro "${devname}" $mountpoint || continue
-        if is_casper_path $mountpoint; then
-            echo $mountpoint
-            return 0
-        else
-            umount $mountpoint
-        fi
-    fi
-
-    if [ -n "${LIVEMEDIA_OFFSET}" ]; then
-        losetup -d "${loopdevname}"
-    fi
-    return 1
-}
-
-find_livefs() {
-    timeout="${1}"
-    # first look at the one specified in the command line
-    if [ ! -z "${LIVEMEDIA}" ]; then
-        if check_dev "null" "${LIVEMEDIA}"; then
-            return 0
-        fi
-    fi
-    # don't start autodetection before timeout has expired
-    if [ -n "${LIVEMEDIA_TIMEOUT}" ]; then
-        if [ "${timeout}" -lt "${LIVEMEDIA_TIMEOUT}" ]; then
-            return 1
-        fi
-    fi
-    # or do the scan of block devices
-    for sysblock in $(echo /sys/block/* | tr ' ' '\n' | grep -v loop | grep -v ram); do
-        devname=$(sys2dev "${sysblock}")
-        fstype=$(get_fstype "${devname}")
-        if /lib/udev/cdrom_id ${devname} > /dev/null; then
-            if check_dev "null" "${devname}" ; then
-                return 0
-            fi
-        elif is_nice_device "${sysblock}" ; then
-            for dev in $(subdevices "${sysblock}"); do
-                if check_dev "${dev}" ; then
-                    return 0
-                fi
-            done
-        elif [ "${fstype}" = "squashfs" -o \
-                "${fstype}" = "ext3" -o \
-                "${fstype}" = "ext2" ]; then
-            # This is an ugly hack situation, the block device has
-            # an image directly on it.  It's hopefully
-            # casper, so take it and run with it.
-            ln -s "${devname}" "${devname}.${fstype}"
-            echo "${devname}.${fstype}"
-            return 0
-        fi
-    done
-    return 1
-}
-
-pulsate() {
-    if [ -x /sbin/usplash_write ]; then
-        /sbin/usplash_write "PULSATE"
-    fi
-}
-
-set_usplash_timeout() {
-    if [ -x /sbin/usplash_write ]; then
-        /sbin/usplash_write "TIMEOUT 120"
-    fi
-}
-
-mountroot() {
-    exec 6>&1
-    exec 7>&2
-    exec > casper.log
-    exec 2>&1
-
-    set_usplash_timeout
-    [ "$quiet" != "y" ] && log_begin_msg "Running /scripts/casper-premount"
-    pulsate
-    run_scripts /scripts/casper-premount
-    [ "$quiet" != "y" ] && log_end_msg
-
-    # Needed here too because some things (*cough* udev *cough*)
-    # changes the timeout
-
-    set_usplash_timeout
-
-    if [ ! -z "${NETBOOT}" ]; then
-        if do_netmount ; then
-            livefs_root="${mountpoint}"
-        else
-            panic "Unable to find a live file system on the network"
-        fi
-    else
-        # Scan local devices for the image
-        for i in 0 1 2 3 4 5 6 7 8 9 a b c d e f 10 11 12 13; do
-            livefs_root=$(find_livefs $i)
-            if [ "${livefs_root}" ]; then
-                break
-            fi
-            sleep 1
-        done
-    fi
-
-    if [ -z "${livefs_root}" ]; then
-        panic "Unable to find a medium containing a live file system"
-    fi
-
-    if [ "${TORAM}" ]; then
-        live_dest="ram"
-    elif [ "${TODISK}" ]; then
-        live_dest="${TODISK}"
-    fi
-    if [ "${live_dest}" ]; then
-        log_begin_msg "Copying live_media to ${live_dest}"
-        copy_live_to "${livefs_root}" "${live_dest}"
-        log_end_msg
-    fi
-
-    mount_images_in_directory "${livefs_root}" "${rootmnt}"
-
-    log_end_msg
-
-    maybe_break casper-bottom
-    [ "$quiet" != "y" ] && log_begin_msg "Running /scripts/casper-bottom"
-
-    pulsate
-    run_scripts /scripts/casper-bottom
-    [ "$quiet" != "y" ] && log_end_msg
-
-    exec 1>&6 6>&-
-    exec 2>&7 7>&-
-    cp casper.log "${rootmnt}/var/log/"
-}