add missing mibs

1 files changed, 1540 insertions, 0 deletions

diff --git a/mibs/HOST-RESOURCES-MIB.txt b/mibs/HOST-RESOURCES-MIB.txt
new file mode 100644
index 00000000..373b9b32
--- /dev/null
+++ b/mibs/HOST-RESOURCES-MIB.txt
@@ -0,0 +1,1540 @@
+HOST-RESOURCES-MIB DEFINITIONS ::= BEGIN
+
+IMPORTS
+MODULE-IDENTITY, OBJECT-TYPE, mib-2,
+Integer32, Counter32, Gauge32, TimeTicks  FROM SNMPv2-SMI
+
+TEXTUAL-CONVENTION, DisplayString,
+TruthValue, DateAndTime, AutonomousType   FROM SNMPv2-TC
+
+MODULE-COMPLIANCE, OBJECT-GROUP           FROM SNMPv2-CONF
+
+InterfaceIndexOrZero                      FROM IF-MIB;
+
+hostResourcesMibModule MODULE-IDENTITY
+   LAST-UPDATED "200003060000Z"    -- 6 March 2000
+   ORGANIZATION "IETF Host Resources MIB Working Group"
+   CONTACT-INFO
+       "Steve Waldbusser
+       Postal: Lucent Technologies, Inc.
+               1213 Innsbruck Dr.
+               Sunnyvale, CA 94089
+               USA
+       Phone:  650-318-1251
+       Fax:    650-318-1633
+       Email:  waldbusser@lucent.com
+
+       In addition, the Host Resources MIB mailing list is
+       dedicated to discussion of this MIB. To join the
+       mailing list, send a request message to
+       hostmib-request@andrew.cmu.edu. The mailing list
+       address is hostmib@andrew.cmu.edu."
+   DESCRIPTION
+       "This MIB is for use in managing host systems. The term
+       `host' is construed to mean any computer that communicates
+       with other similar computers attached to the internet and
+       that is directly used by one or more human beings. Although
+       this MIB does not necessarily apply to devices whose primary
+       function is communications services (e.g., terminal servers,
+       routers, bridges, monitoring equipment), such relevance is
+       not explicitly precluded.  This MIB instruments attributes
+       common to all internet hosts including, for example, both
+       personal computers and systems that run variants of Unix."
+
+   REVISION "200003060000Z"        -- 6 March 2000
+   DESCRIPTION
+       "Clarifications and bug fixes based on implementation
+       experience.  This revision was also reformatted in the SMIv2
+       format. The revisions made were:
+
+       New RFC document standards:
+          Added Copyright notice, updated introduction to SNMP
+          Framework, updated references section, added reference to
+          RFC 2119, and added a meaningful Security Considerations
+          section.
+
+       New IANA considerations section for registration of new types
+
+       Conversion to new SMIv2 syntax for the following types and
+       macros:
+           Counter32, Integer32, Gauge32, MODULE-IDENTITY,
+           OBJECT-TYPE, TEXTUAL-CONVENTION, OBJECT-IDENTITY,
+           MODULE-COMPLIANCE, OBJECT-GROUP
+
+       Used new Textual Conventions:
+           TruthValue, DateAndTime, AutonomousType,
+           InterfaceIndexOrZero
+
+       Fixed typo in hrPrinterStatus.
+
+       Added missing error bits to hrPrinterDetectedErrorState and
+       clarified confusion resulting from suggested mappings to
+       hrPrinterStatus.
+
+       Clarified that size of objects of type
+       InternationalDisplayString is number of octets, not number
+       of encoded symbols.
+
+       Clarified the use of the following objects based on
+       implementation experience:
+           hrSystemInitialLoadDevice, hrSystemInitialLoadParameters,
+           hrMemorySize, hrStorageSize, hrStorageAllocationFailures,
+           hrDeviceErrors, hrProcessorLoad, hrNetworkIfIndex,
+           hrDiskStorageCapacity, hrSWRunStatus, hrSWRunPerfCPU,
+           and hrSWInstalledDate.
+
+       Clarified implementation technique for hrSWInstalledTable.
+
+       Used new AUGMENTS clause for hrSWRunPerfTable.
+
+       Added Internationalization Considerations section.
+
+This revision published as RFC2790."
+
+   REVISION "9910202200Z"    -- 20 October, 1999
+   DESCRIPTION
+       "The original version of this MIB, published as
+       RFC1514."
+   ::= { hrMIBAdminInfo 1 }
+
+host     OBJECT IDENTIFIER ::= { mib-2 25 }
+
+hrSystem        OBJECT IDENTIFIER ::= { host 1 }
+hrStorage       OBJECT IDENTIFIER ::= { host 2 }
+hrDevice        OBJECT IDENTIFIER ::= { host 3 }
+hrSWRun         OBJECT IDENTIFIER ::= { host 4 }
+hrSWRunPerf     OBJECT IDENTIFIER ::= { host 5 }
+hrSWInstalled   OBJECT IDENTIFIER ::= { host 6 }
+hrMIBAdminInfo  OBJECT IDENTIFIER ::= { host 7 }
+
+-- textual conventions
+
+KBytes ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "Storage size, expressed in units of 1024 bytes."
+    SYNTAX Integer32 (0..2147483647)
+
+ProductID ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This textual convention is intended to identify the
+
+        manufacturer, model, and version of a specific
+        hardware or software product.  It is suggested that
+        these OBJECT IDENTIFIERs are allocated such that all
+        products from a particular manufacturer are registered
+        under a subtree distinct to that manufacturer.  In
+        addition, all versions of a product should be
+        registered under a subtree distinct to that product.
+        With this strategy, a management station may uniquely
+        determine the manufacturer and/or model of a product
+        whose productID is unknown to the management station.
+        Objects of this type may be useful for inventory
+        purposes or for automatically detecting
+        incompatibilities or version mismatches between
+        various hardware and software components on a system.
+
+        For example, the product ID for the ACME 4860 66MHz
+        clock doubled processor might be:
+        enterprises.acme.acmeProcessors.a4860DX2.MHz66
+
+        A software product might be registered as:
+        enterprises.acme.acmeOperatingSystems.acmeDOS.six(6).one(1)
+        "
+    SYNTAX OBJECT IDENTIFIER
+
+-- unknownProduct will be used for any unknown ProductID
+-- unknownProduct OBJECT IDENTIFIER ::= { 0 0 }
+
+InternationalDisplayString ::= TEXTUAL-CONVENTION
+    STATUS current
+    DESCRIPTION
+        "This data type is used to model textual information
+        in some character set.  A network management station
+        should use a local algorithm to determine which
+        character set is in use and how it should be
+        displayed.  Note that this character set may be
+        encoded with more than one octet per symbol, but will
+        most often be NVT ASCII. When a size clause is
+        specified for an object of this type, the size refers
+        to the length in octets, not the number of symbols."
+    SYNTAX OCTET STRING
+
+-- The Host Resources System Group
+
+hrSystemUptime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of time since this host was last
+        initialized.  Note that this is different from
+        sysUpTime in the SNMPv2-MIB [RFC1907] because
+        sysUpTime is the uptime of the network management
+        portion of the system."
+    ::= { hrSystem 1 }
+
+hrSystemDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The host's notion of the local date and time of day."
+    ::= { hrSystem 2 }
+
+hrSystemInitialLoadDevice OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrDeviceEntry for the device from
+        which this host is configured to load its initial
+        operating system configuration (i.e., which operating
+        system code and/or boot parameters).
+
+        Note that writing to this object just changes the
+        configuration that will be used the next time the
+        operating system is loaded and does not actually cause
+        the reload to occur."
+    ::= { hrSystem 3 }
+
+hrSystemInitialLoadParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "This object contains the parameters (e.g. a pathname
+        and parameter) supplied to the load device when
+        requesting the initial operating system configuration
+        from that device.
+
+     Note that writing to this object just changes the
+     configuration that will be used the next time the
+     operating system is loaded and does not actually cause
+     the reload to occur."
+    ::= { hrSystem 4 }
+
+hrSystemNumUsers OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of user sessions for which this host is
+        storing state information.  A session is a collection
+        of processes requiring a single act of user
+        authentication and possibly subject to collective job
+        control."
+    ::= { hrSystem 5 }
+
+hrSystemProcesses OBJECT-TYPE
+    SYNTAX     Gauge32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of process contexts currently loaded or
+        running on this system."
+    ::= { hrSystem 6 }
+
+hrSystemMaxProcesses OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The maximum number of process contexts this system
+        can support.  If there is no fixed maximum, the value
+        should be zero.  On systems that have a fixed maximum,
+        this object can help diagnose failures that occur when
+        this maximum is reached."
+    ::= { hrSystem 7 }
+
+-- The Host Resources Storage Group
+
+-- Registration point for storage types, for use with hrStorageType.
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrStorageTypes          OBJECT IDENTIFIER ::= { hrStorage 1 }
+
+hrMemorySize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of physical read-write main memory,
+        typically RAM, contained by the host."
+    ::= { hrStorage 2 }
+
+hrStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of logical storage areas on
+        the host.
+
+        An entry shall be placed in the storage table for each
+        logical area of storage that is allocated and has
+        fixed resource limits.  The amount of storage
+        represented in an entity is the amount actually usable
+        by the requesting entity, and excludes loss due to
+        formatting or file system reference information.
+
+        These entries are associated with logical storage
+        areas, as might be seen by an application, rather than
+        physical storage entities which are typically seen by
+        an operating system.  Storage such as tapes and
+        floppies without file systems on them are typically
+        not allocated in chunks by the operating system to
+        requesting applications, and therefore shouldn't
+        appear in this table.  Examples of valid storage for
+        this table include disk partitions, file systems, ram
+        (for some architectures this is further segmented into
+        regular memory, extended memory, and so on), backing
+        store for virtual memory (`swap space').
+
+        This table is intended to be a useful diagnostic for
+        `out of memory' and `out of buffers' types of
+        failures.  In addition, it can be a useful performance
+        monitoring tool for tracking memory, disk, or buffer
+        usage."
+    ::= { hrStorage 3 }
+
+hrStorageEntry OBJECT-TYPE
+    SYNTAX     HrStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one logical storage area on
+        the host.  As an example, an instance of the
+        hrStorageType object might be named hrStorageType.3"
+    INDEX { hrStorageIndex }
+    ::= { hrStorageTable 1 }
+
+HrStorageEntry ::= SEQUENCE {
+        hrStorageIndex               Integer32,
+        hrStorageType                AutonomousType,
+        hrStorageDescr               DisplayString,
+        hrStorageAllocationUnits     Integer32,
+        hrStorageSize                Integer32,
+        hrStorageUsed                Integer32,
+        hrStorageAllocationFailures  Counter32
+    }
+
+hrStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each logical storage area
+        contained by the host."
+    ::= { hrStorageEntry 1 }
+
+hrStorageType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of storage represented by this entry."
+    ::= { hrStorageEntry 2 }
+
+hrStorageDescr OBJECT-TYPE
+    SYNTAX     DisplayString
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the type and instance of the storage
+        described by this entry."
+    ::= { hrStorageEntry 3 }
+
+hrStorageAllocationUnits OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    UNITS      "Bytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size, in bytes, of the data objects allocated
+        from this pool.  If this entry is monitoring sectors,
+        blocks, buffers, or packets, for example, this number
+        will commonly be greater than one.  Otherwise this
+        number will typically be one."
+    ::= { hrStorageEntry 4 }
+
+hrStorageSize OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The size of the storage represented by this entry, in
+        units of hrStorageAllocationUnits. This object is
+        writable to allow remote configuration of the size of
+        the storage area in those cases where such an
+        operation makes sense and is possible on the
+        underlying system. For example, the amount of main
+        memory allocated to a buffer pool might be modified or
+        the amount of disk space allocated to virtual memory
+        might be modified."
+    ::= { hrStorageEntry 5 }
+
+hrStorageUsed OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The amount of the storage represented by this entry
+        that is allocated, in units of
+        hrStorageAllocationUnits."
+    ::= { hrStorageEntry 6 }
+
+hrStorageAllocationFailures OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of requests for storage represented by
+        this entry that could not be honored due to not enough
+        storage.  It should be noted that as this object has a
+        SYNTAX of Counter32, that it does not have a defined
+        initial value.  However, it is recommended that this
+        object be initialized to zero, even though management
+        stations must not depend on such an initialization."
+    ::= { hrStorageEntry 7 }
+
+-- The Host Resources Device Group
+--
+-- The device group is useful for identifying and diagnosing the
+-- devices on a system.  The hrDeviceTable contains common
+-- information for any type of device.  In addition, some devices
+-- have device-specific tables for more detailed information.  More
+-- such tables may be defined in the future for other device types.
+
+-- Registration point for device types, for use with hrDeviceType.
+
+-- These are defined in the HOST-RESOURCES-TYPES module.
+hrDeviceTypes             OBJECT IDENTIFIER ::= { hrDevice 1 }
+
+hrDeviceTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of devices contained by the
+        host."
+    ::= { hrDevice 2 }
+
+hrDeviceEntry OBJECT-TYPE
+    SYNTAX     HrDeviceEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one device contained by the
+        host.  As an example, an instance of the hrDeviceType
+        object might be named hrDeviceType.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDeviceTable 1 }
+
+HrDeviceEntry ::= SEQUENCE {
+        hrDeviceIndex           Integer32,
+        hrDeviceType            AutonomousType,
+        hrDeviceDescr           DisplayString,
+        hrDeviceID              ProductID,
+        hrDeviceStatus          INTEGER,
+        hrDeviceErrors          Counter32
+    }
+
+hrDeviceIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each device contained by the host.
+        The value for each device must remain constant at
+        least from one re-initialization of the agent to the
+        next re-initialization."
+    ::= { hrDeviceEntry 1 }
+
+hrDeviceType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of device.
+
+        If this value is
+        `hrDeviceProcessor { hrDeviceTypes 3 }' then an entry
+        exists in the hrProcessorTable which corresponds to
+        this device.
+
+        If this value is
+        `hrDeviceNetwork { hrDeviceTypes 4 }', then an entry
+        exists in the hrNetworkTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDevicePrinter { hrDeviceTypes 5 }', then an entry
+        exists in the hrPrinterTable which corresponds to this
+        device.
+
+        If this value is
+        `hrDeviceDiskStorage { hrDeviceTypes 6 }', then an
+        entry exists in the hrDiskStorageTable which
+        corresponds to this device."
+    ::= { hrDeviceEntry 2 }
+
+hrDeviceDescr OBJECT-TYPE
+    SYNTAX     DisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this device, including the
+        device's manufacturer and revision, and optionally,
+        its serial number."
+    ::= { hrDeviceEntry 3 }
+
+hrDeviceID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID for this device."
+    ::= { hrDeviceEntry 4 }
+
+hrDeviceStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   running(2),
+                   warning(3),
+                   testing(4),
+                   down(5)
+
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current operational state of the device described
+        by this row of the table.  A value unknown(1)
+        indicates that the current state of the device is
+        unknown.  running(2) indicates that the device is up
+        and running and that no unusual error conditions are
+        known.  The warning(3) state indicates that agent has
+        been informed of an unusual error condition by the
+        operational software (e.g., a disk device driver) but
+        that the device is still 'operational'.  An example
+        would be a high number of soft errors on a disk.  A
+        value of testing(4), indicates that the device is not
+        available for use because it is in the testing state.
+        The state of down(5) is used only when the agent has
+        been informed that the device is not available for any
+        use."
+    ::= { hrDeviceEntry 5 }
+
+hrDeviceErrors OBJECT-TYPE
+    SYNTAX     Counter32
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of errors detected on this device.  It
+        should be noted that as this object has a SYNTAX of
+        Counter32, that it does not have a defined initial
+        value.  However, it is recommended that this object be
+        initialized to zero, even though management stations
+        must not depend on such an initialization."
+    ::= { hrDeviceEntry 6 }
+
+hrProcessorTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of processors contained by the
+        host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceProcessor'."
+    ::= { hrDevice 3 }
+
+hrProcessorEntry OBJECT-TYPE
+    SYNTAX     HrProcessorEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one processor contained by
+        the host.  The hrDeviceIndex in the index represents
+        the entry in the hrDeviceTable that corresponds to the
+        hrProcessorEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrProcessorFrwID object might be
+        named hrProcessorFrwID.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrProcessorTable 1 }
+
+HrProcessorEntry ::= SEQUENCE {
+        hrProcessorFrwID            ProductID,
+        hrProcessorLoad             Integer32
+    }
+
+hrProcessorFrwID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of the firmware associated with the
+        processor."
+    ::= { hrProcessorEntry 1 }
+
+hrProcessorLoad OBJECT-TYPE
+    SYNTAX     Integer32 (0..100)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The average, over the last minute, of the percentage
+        of time that this processor was not idle.
+        Implementations may approximate this one minute
+        smoothing period if necessary."
+    ::= { hrProcessorEntry 2 }
+
+hrNetworkTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of network devices contained
+        by the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceNetwork'."
+    ::= { hrDevice 4 }
+
+hrNetworkEntry OBJECT-TYPE
+    SYNTAX     HrNetworkEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one network device contained
+        by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrNetworkEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrNetworkIfIndex object might be
+        named hrNetworkIfIndex.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrNetworkTable 1 }
+
+HrNetworkEntry ::= SEQUENCE {
+        hrNetworkIfIndex    InterfaceIndexOrZero
+    }
+
+hrNetworkIfIndex OBJECT-TYPE
+    SYNTAX     InterfaceIndexOrZero
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of ifIndex which corresponds to this
+        network device. If this device is not represented in
+        the ifTable, then this value shall be zero."
+    ::= { hrNetworkEntry 1 }
+
+hrPrinterTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of printers local to the host.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDevicePrinter'."
+    ::= { hrDevice 5 }
+
+hrPrinterEntry OBJECT-TYPE
+    SYNTAX     HrPrinterEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one printer local to the
+        host.  The hrDeviceIndex in the index represents the
+        entry in the hrDeviceTable that corresponds to the
+        hrPrinterEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPrinterStatus object might be
+        named hrPrinterStatus.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrPrinterTable 1 }
+
+HrPrinterEntry ::= SEQUENCE {
+        hrPrinterStatus             INTEGER,
+        hrPrinterDetectedErrorState OCTET STRING
+    }
+
+hrPrinterStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   idle(3),
+                   printing(4),
+                   warmup(5)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The current status of this printer device."
+    ::= { hrPrinterEntry 1 }
+
+hrPrinterDetectedErrorState OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "This object represents any error conditions detected
+        by the printer.  The error conditions are encoded as
+        bits in an octet string, with the following
+        definitions:
+
+             Condition         Bit #
+
+             lowPaper              0
+
+             noPaper               1
+             lowToner              2
+             noToner               3
+             doorOpen              4
+             jammed                5
+             offline               6
+             serviceRequested      7
+             inputTrayMissing      8
+             outputTrayMissing     9
+             markerSupplyMissing  10
+             outputNearFull       11
+             outputFull           12
+             inputTrayEmpty       13
+             overduePreventMaint  14
+
+        Bits are numbered starting with the most significant
+        bit of the first byte being bit 0, the least
+        significant bit of the first byte being bit 7, the
+        most significant bit of the second byte being bit 8,
+        and so on.  A one bit encodes that the condition was
+        detected, while a zero bit encodes that the condition
+        was not detected.
+
+        This object is useful for alerting an operator to
+        specific warning or error conditions that may occur,
+        especially those requiring human intervention."
+    ::= { hrPrinterEntry 2 }
+
+hrDiskStorageTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of long-term storage devices
+        contained by the host.  In particular, disk devices
+        accessed remotely over a network are not included
+        here.
+
+        Note that this table is potentially sparse: a
+        (conceptual) entry exists only if the correspondent
+        value of the hrDeviceType object is
+        `hrDeviceDiskStorage'."
+    ::= { hrDevice 6 }
+
+hrDiskStorageEntry OBJECT-TYPE
+    SYNTAX     HrDiskStorageEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one long-term storage device
+        contained by the host.  The hrDeviceIndex in the index
+        represents the entry in the hrDeviceTable that
+        corresponds to the hrDiskStorageEntry. As an example,
+        an instance of the hrDiskStorageCapacity object might
+        be named hrDiskStorageCapacity.3"
+    INDEX { hrDeviceIndex }
+    ::= { hrDiskStorageTable 1 }
+
+HrDiskStorageEntry ::= SEQUENCE {
+        hrDiskStorageAccess         INTEGER,
+        hrDiskStorageMedia          INTEGER,
+        hrDiskStorageRemoveble      TruthValue,
+        hrDiskStorageCapacity       KBytes
+    }
+
+hrDiskStorageAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this long-term storage device is
+        readable and writable or only readable.  This should
+        reflect the media type, any write-protect mechanism,
+        and any device configuration that affects the entire
+        device."
+    ::= { hrDiskStorageEntry 1 }
+
+hrDiskStorageMedia OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   other(1),
+                   unknown(2),
+                   hardDisk(3),
+                   floppyDisk(4),
+                   opticalDiskROM(5),
+                   opticalDiskWORM(6),     -- Write Once Read Many
+                   opticalDiskRW(7),
+                   ramDisk(8)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication of the type of media used in this long-
+        term storage device."
+    ::= { hrDiskStorageEntry 2 }
+
+hrDiskStorageRemoveble OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "Denotes whether or not the disk media may be removed
+        from the drive."
+    ::= { hrDiskStorageEntry 3 }
+
+hrDiskStorageCapacity OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total size for this long-term storage device. If
+        the media is removable and is currently removed, this
+        value should be zero."
+    ::= { hrDiskStorageEntry 4 }
+
+hrPartitionTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of partitions for long-term
+        storage devices contained by the host.  In particular,
+        partitions accessed remotely over a network are not
+        included here."
+    ::= { hrDevice 7 }
+
+hrPartitionEntry OBJECT-TYPE
+    SYNTAX     HrPartitionEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one partition.  The
+        hrDeviceIndex in the index represents the entry in the
+        hrDeviceTable that corresponds to the
+        hrPartitionEntry.
+
+        As an example of how objects in this table are named,
+        an instance of the hrPartitionSize object might be
+        named hrPartitionSize.3.1"
+    INDEX { hrDeviceIndex, hrPartitionIndex }
+    ::= { hrPartitionTable 1 }
+
+HrPartitionEntry ::= SEQUENCE {
+        hrPartitionIndex                Integer32,
+        hrPartitionLabel                InternationalDisplayString,
+        hrPartitionID                   OCTET STRING,
+        hrPartitionSize                 KBytes,
+        hrPartitionFSIndex              Integer32
+    }
+
+hrPartitionIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each partition on this long-term
+        storage device.  The value for each long-term storage
+        device must remain constant at least from one re-
+        initialization of the agent to the next re-
+        initialization."
+    ::= { hrPartitionEntry 1 }
+
+hrPartitionLabel OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this partition."
+    ::= { hrPartitionEntry 2 }
+
+hrPartitionID OBJECT-TYPE
+    SYNTAX     OCTET STRING
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A descriptor which uniquely represents this partition
+        to the responsible operating system.  On some systems,
+        this might take on a binary representation."
+    ::= { hrPartitionEntry 3 }
+
+hrPartitionSize OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The size of this partition."
+    ::= { hrPartitionEntry 4 }
+
+hrPartitionFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the file system mounted on this
+        partition.  If no file system is mounted on this
+        partition, then this value shall be zero.  Note that
+        multiple partitions may point to one file system,
+        denoting that that file system resides on those
+        partitions.  Multiple file systems may not reside on
+        one partition."
+    ::= { hrPartitionEntry 5 }
+
+-- The File System Table
+
+-- Registration point for popular File System types,
+-- for use with hrFSType. These are defined in the
+-- HOST-RESOURCES-TYPES module.
+hrFSTypes               OBJECT IDENTIFIER ::= { hrDevice 9 }
+
+hrFSTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of file systems local to this
+        host or remotely mounted from a file server.  File
+        systems that are in only one user's environment on a
+        multi-user system will not be included in this table."
+    ::= { hrDevice 8 }
+
+hrFSEntry OBJECT-TYPE
+    SYNTAX     HrFSEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one file system local to
+        this host or remotely mounted from a file server.
+        File systems that are in only one user's environment
+        on a multi-user system will not be included in this
+        table.
+
+        As an example of how objects in this table are named,
+        an instance of the hrFSMountPoint object might be
+        named hrFSMountPoint.3"
+    INDEX { hrFSIndex }
+    ::= { hrFSTable 1 }
+
+HrFSEntry ::= SEQUENCE {
+        hrFSIndex                   Integer32,
+        hrFSMountPoint              InternationalDisplayString,
+        hrFSRemoteMountPoint        InternationalDisplayString,
+        hrFSType                    AutonomousType,
+        hrFSAccess                  INTEGER,
+        hrFSBootable                TruthValue,
+        hrFSStorageIndex            Integer32,
+        hrFSLastFullBackupDate      DateAndTime,
+        hrFSLastPartialBackupDate   DateAndTime
+    }
+
+hrFSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each file system local to this
+        host.  The value for each file system must remain
+        constant at least from one re-initialization of the
+        agent to the next re-initialization."
+    ::= { hrFSEntry 1 }
+
+hrFSMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The path name of the root of this file system."
+    ::= { hrFSEntry 2 }
+
+hrFSRemoteMountPoint OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the name and/or address of the
+        server that this file system is mounted from.  This
+        may also include parameters such as the mount point on
+        the remote file system.  If this is not a remote file
+        system, this string should have a length of zero."
+    ::= { hrFSEntry 3 }
+
+hrFSType OBJECT-TYPE
+    SYNTAX     AutonomousType
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of this object identifies the type of this
+        file system."
+    ::= { hrFSEntry 4 }
+
+hrFSAccess OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   readWrite(1),
+                   readOnly(2)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "An indication if this file system is logically
+        configured by the operating system to be readable and
+        writable or only readable.  This does not represent
+        any local access-control policy, except one that is
+        applied to the file system as a whole."
+    ::= { hrFSEntry 5 }
+
+hrFSBootable OBJECT-TYPE
+    SYNTAX     TruthValue
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A flag indicating whether this file system is
+        bootable."
+    ::= { hrFSEntry 6 }
+
+hrFSStorageIndex OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The index of the hrStorageEntry that represents
+        information about this file system.  If there is no
+        such information available, then this value shall be
+        zero.  The relevant storage entry will be useful in
+        tracking the percent usage of this file system and
+        diagnosing errors that may occur when it runs out of
+        space."
+    ::= { hrFSEntry 7 }
+
+hrFSLastFullBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which this complete file system was
+
+        copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 8 }
+
+hrFSLastPartialBackupDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The last date at which a portion of this file system
+        was copied to another storage device for backup.  This
+        information is useful for ensuring that backups are
+        being performed regularly.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrFSEntry 9 }
+
+-- The Host Resources Running Software Group
+--
+-- The hrSWRunTable contains an entry for each distinct piece of
+-- software that is running or loaded into physical or virtual
+-- memory in preparation for running.  This includes the host's
+-- operating system, device drivers, and applications.
+
+hrSWOSIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of the hrSWRunIndex for the hrSWRunEntry
+        that represents the primary operating system running
+        on this host.  This object is useful for quickly and
+        uniquely identifying that primary operating system."
+    ::= { hrSWRun 1 }
+
+hrSWRunTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software running on the
+        host."
+    ::= { hrSWRun 2 }
+
+hrSWRunEntry OBJECT-TYPE
+    SYNTAX     HrSWRunEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for one piece of software
+        running on the host Note that because the installed
+        software table only contains information for software
+        stored locally on this host, not every piece of
+        running software will be found in the installed
+        software table.  This is true of software that was
+        loaded and run from a non-local source, such as a
+        network-mounted file system.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWRunName object might be named
+        hrSWRunName.1287"
+    INDEX { hrSWRunIndex }
+    ::= { hrSWRunTable 1 }
+
+HrSWRunEntry ::= SEQUENCE {
+        hrSWRunIndex       Integer32,
+        hrSWRunName        InternationalDisplayString,
+        hrSWRunID          ProductID,
+        hrSWRunPath        InternationalDisplayString,
+        hrSWRunParameters  InternationalDisplayString,
+        hrSWRunType        INTEGER,
+        hrSWRunStatus      INTEGER
+    }
+
+hrSWRunIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software running on
+        the host.  Wherever possible, this should be the
+        system's native, unique identification number."
+    ::= { hrSWRunEntry 1 }
+
+hrSWRunName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this running piece of
+        software, including the manufacturer, revision,  and
+        the name by which it is commonly known.  If this
+        software was installed locally, this should be the
+        same string as used in the corresponding
+        hrSWInstalledName."
+    ::= { hrSWRunEntry 2 }
+
+hrSWRunID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this running piece of software."
+    ::= { hrSWRunEntry 3 }
+
+hrSWRunPath OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the location on long-term storage
+        (e.g. a disk drive) from which this software was
+        loaded."
+    ::= { hrSWRunEntry 4 }
+
+hrSWRunParameters OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE(0..128))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A description of the parameters supplied to this
+        software when it was initially loaded."
+    ::= { hrSWRunEntry 5 }
+
+hrSWRunType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWRunEntry 6 }
+
+hrSWRunStatus OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   running(1),
+                   runnable(2),    -- waiting for resource
+                                   -- (i.e., CPU, memory, IO)
+                   notRunnable(3), -- loaded but waiting for event
+                   invalid(4)      -- not loaded
+               }
+    MAX-ACCESS read-write
+    STATUS     current
+    DESCRIPTION
+        "The status of this running piece of software.
+        Setting this value to invalid(4) shall cause this
+        software to stop running and to be unloaded. Sets to
+        other values are not valid."
+    ::= { hrSWRunEntry 7 }
+
+-- The Host Resources Running Software Performance Group
+--
+-- The hrSWRunPerfTable contains an entry corresponding to
+-- each entry in the hrSWRunTable.
+
+hrSWRunPerfTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of running software
+        performance metrics."
+    ::= { hrSWRunPerf 1 }
+
+hrSWRunPerfEntry OBJECT-TYPE
+    SYNTAX     HrSWRunPerfEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry containing software performance
+        metrics.  As an example, an instance of the
+        hrSWRunPerfCPU object might be named
+        hrSWRunPerfCPU.1287"
+    AUGMENTS { hrSWRunEntry }  -- This table augments information in
+                               -- the hrSWRunTable.
+    ::= { hrSWRunPerfTable 1 }
+
+HrSWRunPerfEntry ::= SEQUENCE {
+        hrSWRunPerfCPU          Integer32,
+        hrSWRunPerfMem          KBytes
+}
+
+hrSWRunPerfCPU OBJECT-TYPE
+    SYNTAX     Integer32 (0..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The number of centi-seconds of the total system's CPU
+        resources consumed by this process.  Note that on a
+        multi-processor system, this value may increment by
+        more than one centi-second in one centi-second of real
+        (wall clock) time."
+    ::= { hrSWRunPerfEntry 1 }
+
+hrSWRunPerfMem OBJECT-TYPE
+    SYNTAX     KBytes
+    UNITS      "KBytes"
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The total amount of real system memory allocated to
+        this process."
+    ::= { hrSWRunPerfEntry 2 }
+
+-- The Host Resources Installed Software Group
+--
+-- The hrSWInstalledTable contains an entry for each piece
+-- of software installed in long-term storage (e.g. a disk
+-- drive) locally on this host.  Note that this does not
+-- include software loadable remotely from a network
+-- server.
+--
+-- Different implementations may track software in varying
+-- ways. For example, while some implementations may track
+-- executable files as distinct pieces of software, other
+-- implementations may use other strategies such as keeping
+-- track of software "packages" (e.g., related groups of files)
+-- or keeping track of system or application "patches".
+--
+-- This table is useful for identifying and inventorying
+-- software on a host and for diagnosing incompatibility
+-- and version mismatch problems between various pieces
+-- of hardware and software.
+
+hrSWInstalledLastChange OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when an entry in the
+        hrSWInstalledTable was last added, renamed, or
+        deleted.  Because this table is likely to contain many
+        entries, polling of this object allows a management
+        station to determine when re-downloading of the table
+        might be useful."
+    ::= { hrSWInstalled 1 }
+
+hrSWInstalledLastUpdateTime OBJECT-TYPE
+    SYNTAX     TimeTicks
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The value of sysUpTime when the hrSWInstalledTable
+        was last completely updated.  Because caching of this
+        data will be a popular implementation strategy,
+        retrieval of this object allows a management station
+        to obtain a guarantee that no data in this table is
+        older than the indicated time."
+    ::= { hrSWInstalled 2 }
+
+hrSWInstalledTable OBJECT-TYPE
+    SYNTAX     SEQUENCE OF HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "The (conceptual) table of software installed on this
+        host."
+    ::= { hrSWInstalled 3 }
+
+hrSWInstalledEntry OBJECT-TYPE
+    SYNTAX     HrSWInstalledEntry
+    MAX-ACCESS not-accessible
+    STATUS     current
+    DESCRIPTION
+        "A (conceptual) entry for a piece of software
+        installed on this host.
+
+        As an example of how objects in this table are named,
+        an instance of the hrSWInstalledName object might be
+        named hrSWInstalledName.96"
+    INDEX { hrSWInstalledIndex }
+    ::= { hrSWInstalledTable 1 }
+
+HrSWInstalledEntry ::= SEQUENCE {
+        hrSWInstalledIndex       Integer32,
+        hrSWInstalledName        InternationalDisplayString,
+        hrSWInstalledID          ProductID,
+        hrSWInstalledType        INTEGER,
+        hrSWInstalledDate        DateAndTime
+}
+
+hrSWInstalledIndex OBJECT-TYPE
+    SYNTAX     Integer32 (1..2147483647)
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A unique value for each piece of software installed
+        on the host.  This value shall be in the range from 1
+        to the number of pieces of software installed on the
+        host."
+    ::= { hrSWInstalledEntry 1 }
+
+hrSWInstalledName OBJECT-TYPE
+    SYNTAX     InternationalDisplayString (SIZE (0..64))
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "A textual description of this installed piece of
+        software, including the manufacturer, revision, the
+        name by which it is commonly known, and optionally,
+        its serial number."
+    ::= { hrSWInstalledEntry 2 }
+
+hrSWInstalledID OBJECT-TYPE
+    SYNTAX     ProductID
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The product ID of this installed piece of software."
+    ::= { hrSWInstalledEntry 3 }
+
+hrSWInstalledType OBJECT-TYPE
+    SYNTAX     INTEGER {
+                   unknown(1),
+                   operatingSystem(2),
+                   deviceDriver(3),
+                   application(4)
+               }
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The type of this software."
+    ::= { hrSWInstalledEntry 4 }
+
+hrSWInstalledDate OBJECT-TYPE
+    SYNTAX     DateAndTime
+    MAX-ACCESS read-only
+    STATUS     current
+    DESCRIPTION
+        "The last-modification date of this application as it
+        would appear in a directory listing.
+
+        If this information is not known, then this variable
+        shall have the value corresponding to January 1, year
+        0000, 00:00:00.0, which is encoded as
+        (hex)'00 00 01 01 00 00 00 00'."
+    ::= { hrSWInstalledEntry 5 }
+
+-- Conformance information
+
+hrMIBCompliances OBJECT IDENTIFIER ::= { hrMIBAdminInfo 2 }
+hrMIBGroups      OBJECT IDENTIFIER ::= { hrMIBAdminInfo 3 }
+
+-- Compliance Statements
+hrMIBCompliance MODULE-COMPLIANCE
+    STATUS current
+    DESCRIPTION
+        "The requirements for conformance to the Host Resources MIB."
+    MODULE -- this module
+      MANDATORY-GROUPS { hrSystemGroup, hrStorageGroup,
+                         hrDeviceGroup }
+
+      OBJECT hrSystemDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadDevice
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrSystemInitialLoadParameters
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrStorageSize
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastFullBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      OBJECT hrFSLastPartialBackupDate
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunGroup
+          DESCRIPTION
+              "The Running Software Group. Implementation
+              of this group is mandatory only when the
+              hrSWRunPerfGroup is implemented."
+
+      OBJECT hrSWRunStatus
+          MIN-ACCESS read-only
+          DESCRIPTION
+              "Write access is not required."
+
+      GROUP hrSWRunPerfGroup
+          DESCRIPTION
+              "The Running Software Performance Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+
+      GROUP hrSWInstalledGroup
+          DESCRIPTION
+              "The Installed Software Group.
+              Implementation of this group is at the discretion
+              of the implementor."
+    ::= { hrMIBCompliances 1 }
+
+    hrSystemGroup OBJECT-GROUP
+        OBJECTS {
+            hrSystemUptime, hrSystemDate,
+            hrSystemInitialLoadDevice,
+            hrSystemInitialLoadParameters,
+            hrSystemNumUsers, hrSystemProcesses,
+            hrSystemMaxProcesses
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources System Group."
+        ::= { hrMIBGroups 1 }
+
+    hrStorageGroup OBJECT-GROUP
+        OBJECTS {
+            hrMemorySize, hrStorageIndex, hrStorageType,
+            hrStorageDescr, hrStorageAllocationUnits,
+            hrStorageSize, hrStorageUsed,
+            hrStorageAllocationFailures
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Storage Group."
+        ::= { hrMIBGroups 2 }
+
+    hrDeviceGroup OBJECT-GROUP
+        OBJECTS {
+            hrDeviceIndex, hrDeviceType, hrDeviceDescr,
+            hrDeviceID, hrDeviceStatus, hrDeviceErrors,
+            hrProcessorFrwID, hrProcessorLoad,
+            hrNetworkIfIndex, hrPrinterStatus,
+            hrPrinterDetectedErrorState,
+            hrDiskStorageAccess, hrDiskStorageMedia,
+            hrDiskStorageRemoveble, hrDiskStorageCapacity,
+            hrPartitionIndex, hrPartitionLabel,
+            hrPartitionID, hrPartitionSize,
+            hrPartitionFSIndex, hrFSIndex, hrFSMountPoint,
+            hrFSRemoteMountPoint, hrFSType, hrFSAccess,
+            hrFSBootable, hrFSStorageIndex,
+            hrFSLastFullBackupDate,
+            hrFSLastPartialBackupDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Device Group."
+        ::= { hrMIBGroups 3 }
+
+    hrSWRunGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWOSIndex, hrSWRunIndex, hrSWRunName,
+            hrSWRunID, hrSWRunPath, hrSWRunParameters,
+            hrSWRunType, hrSWRunStatus
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software Group."
+        ::= { hrMIBGroups 4 }
+
+    hrSWRunPerfGroup OBJECT-GROUP
+        OBJECTS { hrSWRunPerfCPU, hrSWRunPerfMem }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Running Software
+            Performance Group."
+        ::= { hrMIBGroups 5 }
+
+    hrSWInstalledGroup OBJECT-GROUP
+        OBJECTS {
+            hrSWInstalledLastChange,
+            hrSWInstalledLastUpdateTime,
+            hrSWInstalledIndex, hrSWInstalledName,
+            hrSWInstalledID, hrSWInstalledType,
+            hrSWInstalledDate
+        }
+        STATUS current
+        DESCRIPTION
+            "The Host Resources Installed Software Group."
+        ::= { hrMIBGroups 6 }
+
+END