diff options
Diffstat (limited to 'mibs/DISMAN-SCRIPT-MIB.txt')
| -rw-r--r-- | mibs/DISMAN-SCRIPT-MIB.txt | 1764 |
1 files changed, 1764 insertions, 0 deletions
diff --git a/mibs/DISMAN-SCRIPT-MIB.txt b/mibs/DISMAN-SCRIPT-MIB.txt new file mode 100644 index 00000000..834f3047 --- /dev/null +++ b/mibs/DISMAN-SCRIPT-MIB.txt @@ -0,0 +1,1764 @@ +DISMAN-SCRIPT-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, + Integer32, Unsigned32, mib-2 + FROM SNMPv2-SMI + + RowStatus, TimeInterval, DateAndTime, StorageType, DisplayString + FROM SNMPv2-TC + + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP + FROM SNMPv2-CONF + + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB; + +scriptMIB MODULE-IDENTITY + LAST-UPDATED "200108210000Z" + ORGANIZATION "IETF Distributed Management Working Group" + CONTACT-INFO + "WG EMail: disman@dorothy.bmc.com + Subscribe: disman-request@dorothy.bmc.com + + Chair: Randy Presuhn + BMC Software, Inc. + + Postal: Office 1-3141 + 2141 North First Street + San Jose, California 95131 + USA + EMail: rpresuhn@bmc.com + Phone: +1 408 546-1006 + + Editor: David B. Levi + Nortel Networks + Postal: 4401 Great America Parkway + Santa Clara, CA 95052-8185 + USA + EMail: dlevi@nortelnetworks.com + Phone: +1 423 686 0432 + + Editor: Juergen Schoenwaelder + TU Braunschweig + Postal: Bueltenweg 74/75 + 38106 Braunschweig + Germany + EMail: schoenw@ibr.cs.tu-bs.de + Phone: +49 531 391-3283" + DESCRIPTION + "This MIB module defines a set of objects that allow to + delegate management scripts to distributed managers." + REVISION "200108210000Z" + DESCRIPTION + "Revised version, published as RFC 3165. + + This revision introduces several new objects: smScriptError, + smScriptLastChange, smLaunchError, smLaunchLastChange, + smLaunchRowExpireTime, smRunResultTime, and smRunErrorTime. + + The following existing objects were updated: the maximum + value of smRunLifeTime now disables the timer, an + autostart value was added to the smLaunchAdminStatus + object, and a new expired state was added to the + smLaunchOperStatus object. + + A new smScriptException notification has been added to + support runtime error notifications. + + Created new conformance and compliance statements that + take care of the new objects and notifications. + + Clarifications have been added in several places to remove + ambiguities or contradictions that were discovered and + reported by implementors." + + REVISION "199902221800Z" + DESCRIPTION + "Initial version, published as RFC 2592." + ::= { mib-2 64 } + +-- +-- The groups defined within this MIB module: +-- + +smObjects OBJECT IDENTIFIER ::= { scriptMIB 1 } +smNotifications OBJECT IDENTIFIER ::= { scriptMIB 2 } +smConformance OBJECT IDENTIFIER ::= { scriptMIB 3 } + +-- +-- Script language and language extensions. +-- +-- This group defines tables which list the languages and the +-- language extensions supported by a Script MIB implementation. +-- Languages are uniquely identified by object identifier values. +-- + +smLangTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmLangEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists supported script languages." + ::= { smObjects 1 } + +smLangEntry OBJECT-TYPE + SYNTAX SmLangEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular language." + INDEX { smLangIndex } + ::= { smLangTable 1 } + +SmLangEntry ::= SEQUENCE { + smLangIndex Integer32, + smLangLanguage OBJECT IDENTIFIER, + smLangVersion SnmpAdminString, + smLangVendor OBJECT IDENTIFIER, + smLangRevision SnmpAdminString, + smLangDescr SnmpAdminString +} + +smLangIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this language entry. + + The value is expected to remain constant at least from one + re-initialization of the entity's network management system + to the next re-initialization. + + Note that the data type and the range of this object must + be consistent with the definition of smScriptLanguage." + ::= { smLangEntry 1 } + +smLangLanguage OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The globally unique identification of the language." + ::= { smLangEntry 2 } + +smLangVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language. The zero-length string + shall be used if the language does not have a version + number. + + It is suggested that the version number consist of one or + more decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smLangEntry 3 } + +smLangVendor OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An object identifier which identifies the vendor who + provides the implementation of the language. This object + identifier SHALL point to the object identifier directly + below the enterprise object identifier {1 3 6 1 4 1} + allocated for the vendor. The value must be the object + identifier {0 0} if the vendor is not known." + ::= { smLangEntry 4 } + +smLangRevision OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language implementation. + The value of this object must be an empty string if + version number of the implementation is unknown. + + It is suggested that the value consist of one or more + decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smLangEntry 5 } + +smLangDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of the language." + ::= { smLangEntry 6 } + +smExtsnTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmExtsnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists supported language extensions." + ::= { smObjects 2 } + +smExtsnEntry OBJECT-TYPE + SYNTAX SmExtsnEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular language extension." + INDEX { smLangIndex, smExtsnIndex } + ::= { smExtsnTable 1 } + +SmExtsnEntry ::= SEQUENCE { + smExtsnIndex Integer32, + smExtsnExtension OBJECT IDENTIFIER, + smExtsnVersion SnmpAdminString, + smExtsnVendor OBJECT IDENTIFIER, + smExtsnRevision SnmpAdminString, + smExtsnDescr SnmpAdminString +} + +smExtsnIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this language extension entry. + + The value is expected to remain constant at least from one + re-initialization of the entity's network management system + to the next re-initialization." + ::= { smExtsnEntry 1} + +smExtsnExtension OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The globally unique identification of the language + extension." + ::= { smExtsnEntry 2 } + +smExtsnVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the language extension. + It is suggested that the version number consist of one or + more decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smExtsnEntry 3 } + +smExtsnVendor OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An object identifier which identifies the vendor who + provides the implementation of the extension. The + object identifier value should point to the OID node + directly below the enterprise OID {1 3 6 1 4 1} + allocated for the vendor. The value must by the object + identifier {0 0} if the vendor is not known." + ::= { smExtsnEntry 4 } + +smExtsnRevision OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version number of the extension implementation. + The value of this object must be an empty string if + version number of the implementation is unknown. + + It is suggested that the value consist of one or more + decimal numbers separated by dots, where the first + number is called the major version number." + ::= { smExtsnEntry 5 } + +smExtsnDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual description of the language extension." + ::= { smExtsnEntry 6 } + +-- +-- Scripts known by the Script MIB implementation. +-- +-- This group defines a table which lists all known scripts. +-- Scripts can be added and removed through manipulation of the +-- smScriptTable. +-- + +smScriptObjects OBJECT IDENTIFIER ::= { smObjects 3 } + +smScriptTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmScriptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes locally known scripts." + ::= { smScriptObjects 1 } + +smScriptEntry OBJECT-TYPE + SYNTAX SmScriptEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular script. Every script that + is stored in non-volatile memory is required to appear in + this script table." + INDEX { smScriptOwner, smScriptName } + ::= { smScriptTable 1 } + +SmScriptEntry ::= SEQUENCE { + smScriptOwner SnmpAdminString, + smScriptName SnmpAdminString, + smScriptDescr SnmpAdminString, + smScriptLanguage Integer32, + smScriptSource DisplayString, + smScriptAdminStatus INTEGER, + smScriptOperStatus INTEGER, + smScriptStorageType StorageType, + smScriptRowStatus RowStatus, + smScriptError SnmpAdminString, + smScriptLastChange DateAndTime +} + +smScriptOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The manager who owns this row in the smScriptTable." + ::= { smScriptEntry 1 } + +smScriptName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally-unique, administratively assigned name for this + script. This object allows an smScriptOwner to have multiple + entries in the smScriptTable. + + This value of this object may be used to derive the name + (e.g. a file name) which is used by the Script MIB + implementation to access the script in non-volatile + storage. The details of this mapping are implementation + specific. However, the mapping needs to ensure that scripts + created by different owners with the same script name do not + map to the same name in non-volatile storage." + ::= { smScriptEntry 2 } + +smScriptDescr OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A description of the purpose of the script." + ::= { smScriptEntry 3 } + +smScriptLanguage OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object type identifies an entry in the + smLangTable which is used to execute this script. + The special value 0 may be used by hard-wired scripts + that can not be modified and that are executed by + internal functions. + + Set requests to change this object are invalid if the + value of smScriptOperStatus is `enabled' or `compiling' + and will result in an inconsistentValue error. + + Note that the data type and the range of this object must + be consistent with the definition of smLangIndex." + ::= { smScriptEntry 4 } + +smScriptSource OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object either contains a reference to the script + source or an empty string. A reference must be given + in the form of a Uniform Resource Locator (URL) as + defined in RFC 2396. The allowed character sets and the + encoding rules defined in RFC 2396 section 2 apply. + + When the smScriptAdminStatus object is set to `enabled', + the Script MIB implementation will `pull' the script + source from the URL contained in this object if the URL + is not empty. + + An empty URL indicates that the script source is loaded + from local storage. The script is read from the smCodeTable + if the value of smScriptStorageType is volatile. Otherwise, + the script is read from non-volatile storage. + + Note: This document does not mandate implementation of any + specific URL scheme. An attempt to load a script from a + nonsupported URL scheme will cause the smScriptOperStatus + to report an `unknownProtocol' error. + + Set requests to change this object are invalid if the + value of smScriptOperStatus is `enabled', `editing', + `retrieving' or `compiling' and will result in an + inconsistentValue error." + DEFVAL { ''H } + ::= { smScriptEntry 5 } + +smScriptAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + editing(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of + the script. See the definition of smScriptOperStatus for + a description of the values. + + When the smScriptAdminStatus object is set to `enabled' and + the smScriptOperStatus is `disabled' or one of the error + states, the Script MIB implementation will `pull' the script + source from the URL contained in the smScriptSource object + if the URL is not empty." + DEFVAL { disabled } + ::= { smScriptEntry 6 } + +smScriptOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + editing(3), + retrieving(4), + compiling(5), + noSuchScript(6), + accessDenied(7), + wrongLanguage(8), + wrongVersion(9), + compilationFailed(10), + noResourcesLeft(11), + unknownProtocol(12), + protocolFailure(13), + genericError(14) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The actual status of the script in the runtime system. The + value of this object is only meaningful when the value of + the smScriptRowStatus object is `active'. + + The smScriptOperStatus object may have the following values: + + - `enabled' indicates that the script is available and can + be started by a launch table entry. + + - `disabled' indicates that the script can not be used. + + - `editing' indicates that the script can be modified in the + smCodeTable. + + - `retrieving' indicates that the script is currently being + loaded from non-volatile storage or a remote system. + + - `compiling' indicates that the script is currently being + compiled by the runtime system. + + - `noSuchScript' indicates that the script does not exist + at the smScriptSource. + + - `accessDenied' indicates that the script can not be loaded + from the smScriptSource due to a lack of permissions. + + - `wrongLanguage' indicates that the script can not be + loaded from the smScriptSource because of a language + mismatch. + + - `wrongVersion' indicates that the script can not be loaded + from the smScriptSource because of a language version + mismatch. + + - `compilationFailed' indicates that the compilation failed. + + - `noResourcesLeft' indicates that the runtime system does + not have enough resources to load the script. + + - `unknownProtocol' indicates that the script could not be + loaded from the smScriptSource because the requested + protocol is not supported. + + - `protocolFailure' indicates that the script could not be + loaded from the smScriptSource because of a protocol + failure. + + - `genericError' indicates that the script could not be + + loaded due to an error condition not listed above. + + The `retrieving' and `compiling' states are transient states + which will either lead to one of the error states or the + `enabled' state. The `disabled' and `editing' states are + administrative states which are only reached by explicit + management operations. + + All launch table entries that refer to this script table + entry shall have an smLaunchOperStatus value of `disabled' + when the value of this object is not `enabled'." + DEFVAL { disabled } + ::= { smScriptEntry 7 } + +smScriptStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object defines whether this row and the script + controlled by this row are kept in volatile storage and + lost upon reboot or if this row is backed up by + non-volatile or permanent storage. + + The storage type of this row always complies with the value + of this entry if the value of the corresponding RowStatus + object is `active'. + + However, the storage type of the script controlled by this + row may be different, if the value of this entry is + `non-volatile'. The script controlled by this row is written + into local non-volatile storage if the following condition + becomes true: + + (a) the URL contained in the smScriptSource object is empty + and + (b) the smScriptStorageType is `nonVolatile' + and + (c) the smScriptOperStatus is `enabled' + + Setting this object to `volatile' removes a script from + non-volatile storage if the script controlled by this row + has been in non-volatile storage before. Attempts to set + this object to permanent will always fail with an + inconsistentValue error. + + The value of smScriptStorageType is only meaningful if the + value of the corresponding RowStatus object is `active'. + + If smScriptStorageType has the value permanent(4), then all + objects whose MAX-ACCESS value is read-create must be + writable, with the exception of the smScriptStorageType and + smScriptRowStatus objects, which shall be read-only." + DEFVAL { volatile } + ::= { smScriptEntry 8 } + +smScriptRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + Changing the smScriptRowStatus from `active' to + `notInService' will remove the associated script from the + runtime system. + + Deleting conceptual rows from this table may affect the + deletion of other resources associated with this row. For + example, a script stored in non-volatile storage may be + removed from non-volatile storage. + + An entry may not exist in the `active' state unless all + required objects in the entry have appropriate values. Rows + that are not complete or not in service are not known by the + script runtime system. + + Attempts to `destroy' a row or to set a row `notInService' + while the smScriptOperStatus is `enabled' will result in an + inconsistentValue error. + + Attempts to `destroy' a row or to set a row `notInService' + where the value of the smScriptStorageType object is + `permanent' or `readOnly' will result in an + inconsistentValue error. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smScriptEntry 9 } + +smScriptError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if the + + transition into the operational status `enabled' failed. + Implementations must reset the error message to a + zero-length string when a new attempt to change the + script status to `enabled' is started." + DEFVAL { ''H } + ::= { smScriptEntry 10 } + +smScriptLastChange OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when this script table entry was last + modified. The value '0000000000000000'H is returned if + the script table entry has not yet been modified. + + Note that the resetting of smScriptError is not considered + a change of the script table entry." + DEFVAL { '0000000000000000'H } + ::= { smScriptEntry 11 } + +-- +-- Access to script code via SNMP +-- +-- The smCodeTable allows script code to be read and modified +-- via SNMP. +-- + +smCodeTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table contains the script code for scripts that are + written via SNMP write operations." + ::= { smScriptObjects 2 } + +smCodeEntry OBJECT-TYPE + SYNTAX SmCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular fragment of a script." + INDEX { smScriptOwner, smScriptName, smCodeIndex } + ::= { smCodeTable 1 } + +SmCodeEntry ::= SEQUENCE { + smCodeIndex Unsigned32, + smCodeText OCTET STRING, + smCodeRowStatus RowStatus +} + +smCodeIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The index value identifying this code fragment." + ::= { smCodeEntry 1 } + +smCodeText OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (1..1024)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The code that makes up a fragment of a script. The format + of this code fragment depends on the script language which + is identified by the associated smScriptLanguage object." + ::= { smCodeEntry 2 } + +smCodeRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smCodeEntry 3 } + +-- +-- Script execution. +-- +-- This group defines tables which allow script execution to be +-- initiated, suspended, resumed, and terminated. It also provides +-- a mechanism for keeping a history of recent script executions +-- and their results. +-- + +smRunObjects OBJECT IDENTIFIER ::= { smObjects 4 } + +smLaunchTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmLaunchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes scripts that are ready + to be executed together with their parameters." + ::= { smRunObjects 1 } + +smLaunchEntry OBJECT-TYPE + SYNTAX SmLaunchEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular executable script." + INDEX { smLaunchOwner, smLaunchName } + ::= { smLaunchTable 1 } + +SmLaunchEntry ::= SEQUENCE { + smLaunchOwner SnmpAdminString, + smLaunchName SnmpAdminString, + smLaunchScriptOwner SnmpAdminString, + smLaunchScriptName SnmpAdminString, + smLaunchArgument OCTET STRING, + smLaunchMaxRunning Unsigned32, + smLaunchMaxCompleted Unsigned32, + smLaunchLifeTime TimeInterval, + smLaunchExpireTime TimeInterval, + smLaunchStart Integer32, + smLaunchControl INTEGER, + smLaunchAdminStatus INTEGER, + smLaunchOperStatus INTEGER, + smLaunchRunIndexNext Integer32, + smLaunchStorageType StorageType, + smLaunchRowStatus RowStatus, + smLaunchError SnmpAdminString, + smLaunchLastChange DateAndTime, + smLaunchRowExpireTime TimeInterval +} + +smLaunchOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The manager who owns this row in the smLaunchTable. Every + instance of a running script started from a particular entry + in the smLaunchTable (i.e. entries in the smRunTable) will + be owned by the same smLaunchOwner used to index the entry + in the smLaunchTable. This owner is not necessarily the same + as the owner of the script itself (smLaunchScriptOwner)." + ::= { smLaunchEntry 1 } + +smLaunchName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (1..32)) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally-unique, administratively assigned name for this + launch table entry. This object allows an smLaunchOwner to + have multiple entries in the smLaunchTable. The smLaunchName + is an arbitrary name that must be different from any other + smLaunchTable entries with the same smLaunchOwner but can be + the same as other entries in the smLaunchTable with + different smLaunchOwner values. Note that the value of + smLaunchName is not related in any way to the name of the + script being launched." + ::= { smLaunchEntry 2 } + +smLaunchScriptOwner OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object in combination with the value of + smLaunchScriptName identifies the script that can be + launched from this smLaunchTable entry. Attempts to write + this object will fail with an inconsistentValue error if + the value of smLaunchOperStatus is `enabled'." + ::= { smLaunchEntry 3 } + +smLaunchScriptName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object in combination with the value of + the smLaunchScriptOwner identifies the script that can be + launched from this smLaunchTable entry. The zero-length + string may be used to point to a non-existing script. + + Attempts to write this object will fail with an + inconsistentValue error if the value of smLaunchOperStatus + is `enabled'." + DEFVAL { ''H } + ::= { smLaunchEntry 4 } + +smLaunchArgument OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The argument supplied to the script. When a script is + invoked, the value of this object is used to initialize + the smRunArgument object." + DEFVAL { ''H } + ::= { smLaunchEntry 5 } + +smLaunchMaxRunning OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of concurrently running scripts that may + be invoked from this entry in the smLaunchTable. Lowering + the current value of this object does not affect any scripts + that are already executing." + DEFVAL { 1 } + ::= { smLaunchEntry 6 } + +smLaunchMaxCompleted OBJECT-TYPE + SYNTAX Unsigned32 (1..4294967295) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The maximum number of finished scripts invoked from this + entry in the smLaunchTable allowed to be retained in the + smRunTable. Whenever the value of this object is changed + and whenever a script terminates, entries in the smRunTable + are deleted if necessary until the number of completed + scripts is smaller than the value of this object. Scripts + whose smRunEndTime value indicates the oldest completion + time are deleted first." + DEFVAL { 1 } + ::= { smLaunchEntry 7 } + +smLaunchLifeTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default maximum amount of time a script launched + from this entry may run. The value of this object is used + to initialize the smRunLifeTime object when a script is + launched. Changing the value of an smLaunchLifeTime + instance does not affect scripts previously launched from + + this entry." + DEFVAL { 360000 } + ::= { smLaunchEntry 8 } + +smLaunchExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The default maximum amount of time information about a + script launched from this entry is kept in the smRunTable + after the script has completed execution. The value of + this object is used to initialize the smRunExpireTime + object when a script is launched. Changing the value of an + smLaunchExpireTime instance does not affect scripts + previously launched from this entry." + DEFVAL { 360000 } + ::= { smLaunchEntry 9 } + +smLaunchStart OBJECT-TYPE + SYNTAX Integer32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to start the execution of scripts. + When retrieved, the value will be the value of smRunIndex + for the last script that started execution by manipulating + this object. The value will be zero if no script started + execution yet. + + A script is started by setting this object to an unused + smRunIndex value. A new row in the smRunTable will be + created which is indexed by the value supplied by the + set-request in addition to the value of smLaunchOwner and + smLaunchName. An unused value can be obtained by reading + the smLaunchRunIndexNext object. + + Setting this object to the special value 0 will start + the script with a self-generated smRunIndex value. The + consequence is that the script invoker has no reliable + way to determine the smRunIndex value for this script + invocation and that the invoker has therefore no way + to obtain the results from this script invocation. The + special value 0 is however useful for scheduled script + invocations. + + If this object is set, the following checks must be + + performed: + + 1) The value of the smLaunchOperStatus object in this + entry of the smLaunchTable must be `enabled'. + 2) The values of smLaunchScriptOwner and + smLaunchScriptName of this row must identify an + existing entry in the smScriptTable. + 3) The value of smScriptOperStatus of this entry must + be `enabled'. + 4) The principal performing the set operation must have + read access to the script. This must be checked by + calling the isAccessAllowed abstract service interface + defined in RFC 2271 on the row in the smScriptTable + identified by smLaunchScriptOwner and smLaunchScriptName. + The isAccessAllowed abstract service interface must be + called on all columnar objects in the smScriptTable with + a MAX-ACCESS value different than `not-accessible'. The + test fails as soon as a call indicates that access is + not allowed. + 5) If the value provided by the set operation is not 0, + a check must be made that the value is currently not + in use. Otherwise, if the value provided by the set + operation is 0, a suitable unused value must be + generated. + 6) The number of currently executing scripts invoked + from this smLaunchTable entry must be less than + smLaunchMaxRunning. + + Attempts to start a script will fail with an + inconsistentValue error if one of the checks described + above fails. + + Otherwise, if all checks have been passed, a new entry + in the smRunTable will be created indexed by smLaunchOwner, + smLaunchName and the new value for smRunIndex. The value + of smLaunchArgument will be copied into smRunArgument, + the value of smLaunchLifeTime will be copied to + smRunLifeTime, and the value of smLaunchExpireTime + will be copied to smRunExpireTime. + + The smRunStartTime will be set to the current time and + the smRunState will be set to `initializing' before the + script execution is initiated in the appropriate runtime + system. + + Note that the data type and the range of this object must + be consistent with the smRunIndex object. Since this + object might be written from the scheduling MIB, the + + data type Integer32 rather than Unsigned32 is used." + DEFVAL { 0 } + ::= { smLaunchEntry 10 } + +smLaunchControl OBJECT-TYPE + SYNTAX INTEGER { + abort(1), + suspend(2), + resume(3), + nop(4) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object is used to request a state change for all + running scripts in the smRunTable that were started from + this row in the smLaunchTable. + + Setting this object to abort(1), suspend(2) or resume(3) + will set the smRunControl object of all applicable rows + in the smRunTable to abort(1), suspend(2) or resume(3) + respectively. The phrase `applicable rows' means the set of + rows which were created from this entry in the smLaunchTable + and whose value of smRunState allows the corresponding + state change as described in the definition of the + smRunControl object. Setting this object to nop(4) has no + effect. + + Attempts to set this object lead to an inconsistentValue + error only if all implicated sets on all the applicable + rows lead to inconsistentValue errors. It is not allowed + to return an inconsistentValue error if at least one state + change on one of the applicable rows was successful." + DEFVAL { nop } + ::= { smLaunchEntry 11 } + +smLaunchAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + autostart(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of + this launch table entry. The values enabled(1) and + autostart(3) both indicate that the launch table entry + + should transition into the operational enabled(1) state as + soon as the associated script table entry is enabled(1). + + The value autostart(3) further indicates that the script + is started automatically by conceptually writing the + value 0 into the associated smLaunchStart object during + the transition from the `disabled' into the `enabled' + operational state. This is useful for scripts that are + to be launched on system start-up." + DEFVAL { disabled } + ::= { smLaunchEntry 12 } + +smLaunchOperStatus OBJECT-TYPE + SYNTAX INTEGER { + enabled(1), + disabled(2), + expired(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the actual status of + this launch table entry. The smLaunchOperStatus object + may have the following values: + + - `enabled' indicates that the launch table entry is + available and can be used to start scripts. + + - `disabled' indicates that the launch table entry can + not be used to start scripts. + + - `expired' indicates that the launch table entry can + not be used to start scripts and will disappear as + soon as all smRunTable entries associated with this + launch table entry have disappeared. + + The value `enabled' requires that the smLaunchRowStatus + object is active. The value `disabled' requires that there + are no entries in the smRunTable associated with this + smLaunchTable entry." + DEFVAL { disabled } + ::= { smLaunchEntry 13 } + +smLaunchRunIndexNext OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable is used for creating rows in the smRunTable. + The value of this variable is a currently unused value + for smRunIndex, which can be written into the smLaunchStart + object associated with this row to launch a script. + + The value returned when reading this variable must be unique + for the smLaunchOwner and smLaunchName associated with this + row. Subsequent attempts to read this variable must return + different values. + + This variable will return the special value 0 if no new rows + can be created. + + Note that the data type and the range of this object must be + consistent with the definition of smRunIndex." + ::= { smLaunchEntry 14 } + +smLaunchStorageType OBJECT-TYPE + SYNTAX StorageType + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This object defines if this row is kept in volatile storage + and lost upon reboot or if this row is backed up by stable + storage. + + The value of smLaunchStorageType is only meaningful if the + value of the corresponding RowStatus object is active. + + If smLaunchStorageType has the value permanent(4), then all + objects whose MAX-ACCESS value is read-create must be + writable, with the exception of the smLaunchStorageType and + smLaunchRowStatus objects, which shall be read-only." + DEFVAL { volatile } + ::= { smLaunchEntry 15 } + +smLaunchRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "A control that allows entries to be added and removed from + this table. + + Attempts to `destroy' a row or to set a row `notInService' + while the smLaunchOperStatus is `enabled' will result in + an inconsistentValue error. + + Attempts to `destroy' a row or to set a row `notInService' + where the value of the smLaunchStorageType object is + `permanent' or `readOnly' will result in an + inconsistentValue error. + + The value of this object has no effect on whether other + objects in this conceptual row can be modified." + ::= { smLaunchEntry 16 } + +smLaunchError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if an + attempt to launch a script fails. Implementations must reset + the error message to a zero-length string when a new attempt + to launch a script is started." + DEFVAL { ''H } + ::= { smLaunchEntry 17 } + +smLaunchLastChange OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when this launch table entry was last + modified. The value '0000000000000000'H is returned if + the launch table entry has not yet been modified. + + Note that a change of smLaunchStart, smLaunchControl, + smLaunchRunIndexNext, smLaunchRowExpireTime, or the + resetting of smLaunchError is not considered a change + of this launch table entry." + DEFVAL { '0000000000000000'H } + ::= { smLaunchEntry 18 } + +smLaunchRowExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The value of this object specifies how long this row remains + in the `enabled' or `disabled' operational state. The value + reported by this object ticks backwards. When the value + reaches 0, it stops ticking backward and the row is + deleted if there are no smRunTable entries associated with + + this smLaunchTable entry. Otherwise, the smLaunchOperStatus + changes to `expired' and the row deletion is deferred + until there are no smRunTable entries associated with this + smLaunchTable entry. + + The smLaunchRowExpireTime will not tick backwards if it is + set to its maximum value (2147483647). In other words, + setting this object to its maximum value turns the timer + off. + + The value of this object may be set in order to increase + or reduce the remaining time that the launch table entry + may be used. Setting the value to 0 will cause an immediate + row deletion or transition into the `expired' operational + state. + + It is not possible to set this object while the operational + status is `expired'. Attempts to modify this object while + the operational status is `expired' leads to an + inconsistentValue error. + + Note that the timer ticks backwards independent of the + operational state of the launch table entry." + DEFVAL { 2147483647 } + ::= { smLaunchEntry 19 } + +smRunTable OBJECT-TYPE + SYNTAX SEQUENCE OF SmRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists and describes scripts that are currently + running or have been running in the past." + ::= { smRunObjects 2 } + +smRunEntry OBJECT-TYPE + SYNTAX SmRunEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry describing a particular running or finished + script." + INDEX { smLaunchOwner, smLaunchName, smRunIndex } + ::= { smRunTable 1 } + +SmRunEntry ::= SEQUENCE { + smRunIndex Integer32, + smRunArgument OCTET STRING, + smRunStartTime DateAndTime, + smRunEndTime DateAndTime, + smRunLifeTime TimeInterval, + smRunExpireTime TimeInterval, + smRunExitCode INTEGER, + smRunResult OCTET STRING, + smRunControl INTEGER, + smRunState INTEGER, + smRunError SnmpAdminString, + smRunResultTime DateAndTime, + smRunErrorTime DateAndTime +} + +smRunIndex OBJECT-TYPE + SYNTAX Integer32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The locally arbitrary, but unique identifier associated + with this running or finished script. This value must be + unique for all rows in the smRunTable with the same + smLaunchOwner and smLaunchName. + + Note that the data type and the range of this object must + be consistent with the definition of smLaunchRunIndexNext + and smLaunchStart." + ::= { smRunEntry 1 } + +smRunArgument OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The argument supplied to the script when it started." + DEFVAL { ''H } + ::= { smRunEntry 2 } + +smRunStartTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the execution started. The value + '0000000000000000'H is returned if the script has not + started yet." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 3 } + +smRunEndTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the execution terminated. The value + '0000000000000000'H is returned if the script has not + terminated yet." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 4 } + +smRunLifeTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies how long the script can execute. + This object returns the remaining time that the script + may run. The object is initialized with the value of the + associated smLaunchLifeTime object and ticks backwards. + The script is aborted immediately when the value reaches 0. + + The value of this object may be set in order to increase or + reduce the remaining time that the script may run. Setting + this value to 0 will abort script execution immediately, + and, if the value of smRunExpireTime is also 0, will remove + this entry from the smRunTable once it has terminated. + + If smRunLifeTime is set to its maximum value (2147483647), + either by a set operation or by its initialization from the + smLaunchLifeTime object, then it will not tick backwards. + A running script with a maximum smRunLifeTime value will + thus never be terminated with a `lifeTimeExceeded' exit + code. + + The value of smRunLifeTime reflects the real-time execution + time as seen by the outside world. The value of this object + will always be 0 for a script that finished execution, that + is smRunState has the value `terminated'. + + The value of smRunLifeTime does not change while a script + is suspended, that is smRunState has the value `suspended'. + Note that this does not affect set operations. It is legal + to modify smRunLifeTime via set operations while a script + is suspended." + ::= { smRunEntry 5 } + +smRunExpireTime OBJECT-TYPE + SYNTAX TimeInterval + UNITS "centi-seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object specifies how long this row can + exist in the smRunTable after the script has terminated. + This object returns the remaining time that the row may + exist before it is aged out. The object is initialized with + the value of the associated smLaunchExpireTime object and + ticks backwards. The entry in the smRunTable is destroyed + when the value reaches 0 and the smRunState has the value + `terminated'. + + The value of this object may be set in order to increase or + reduce the remaining time that the row may exist. Setting + the value to 0 will destroy this entry as soon as the + smRunState has the value `terminated'." + ::= { smRunEntry 6 } + +smRunExitCode OBJECT-TYPE + SYNTAX INTEGER { + noError(1), + halted(2), + lifeTimeExceeded(3), + noResourcesLeft(4), + languageError(5), + runtimeError(6), + invalidArgument(7), + securityViolation(8), + genericError(9) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the reason why a + script finished execution. The smRunExitCode code may have + one of the following values: + + - `noError', which indicates that the script completed + successfully without errors; + + - `halted', which indicates that the script was halted + by a request from an authorized manager; + + - `lifeTimeExceeded', which indicates that the script + exited because a time limit was exceeded; + + - `noResourcesLeft', which indicates that the script + exited because it ran out of resources (e.g. memory); + + - `languageError', which indicates that the script exited + because of a language error (e.g. a syntax error in an + interpreted language); + + - `runtimeError', which indicates that the script exited + due to a runtime error (e.g. a division by zero); + + - `invalidArgument', which indicates that the script could + not be run because of invalid script arguments; + + - `securityViolation', which indicates that the script + exited due to a security violation; + + - `genericError', which indicates that the script exited + for an unspecified reason. + + If the script has not yet begun running, or is currently + running, the value will be `noError'." + DEFVAL { noError } + ::= { smRunEntry 7 } + +smRunResult OBJECT-TYPE + SYNTAX OCTET STRING + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The result value produced by the running script. Note that + the result may change while the script is executing." + DEFVAL { ''H } + ::= { smRunEntry 8 } + +smRunControl OBJECT-TYPE + SYNTAX INTEGER { + abort(1), + suspend(2), + resume(3), + nop(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object indicates the desired status of the + script execution defined by this row. + + Setting this object to `abort' will abort execution if the + + value of smRunState is `initializing', `executing', + `suspending', `suspended' or `resuming'. Setting this object + to `abort' when the value of smRunState is `aborting' or + `terminated', or if the implementation can determine that + the attempt to abort the execution would fail, will result + in an inconsistentValue error. + + Setting this object to `suspend' will suspend execution + if the value of smRunState is `executing'. Setting this + object to `suspend' will cause an inconsistentValue error + if the value of smRunState is not `executing' or if the + implementation can determine that the attempt to suspend + the execution would fail. + + Setting this object to `resume' will resume execution + if the value of smRunState is `suspending' or + `suspended'. Setting this object to `resume' will cause an + inconsistentValue error if the value of smRunState is + not `suspended' or if the implementation can determine + that the attempt to resume the execution would fail. + + Setting this object to nop(4) has no effect." + DEFVAL { nop } + ::= { smRunEntry 9 } + +smRunState OBJECT-TYPE + SYNTAX INTEGER { + initializing(1), + executing(2), + suspending(3), + suspended(4), + resuming(5), + aborting(6), + terminated(7) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of this object indicates the script's execution + state. If the script has been invoked but has not yet + begun execution, the value will be `initializing'. If the + script is running, the value will be `executing'. + + A running script which received a request to suspend + execution first transitions into a temporary `suspending' + state. The temporary `suspending' state changes to + `suspended' when the script has actually been suspended. The + temporary `suspending' state changes back to `executing' if + + the attempt to suspend the running script fails. + + A suspended script which received a request to resume + execution first transitions into a temporary `resuming' + state. The temporary `resuming' state changes to `running' + when the script has actually been resumed. The temporary + `resuming' state changes back to `suspended' if the attempt + to resume the suspended script fails. + + A script which received a request to abort execution but + which is still running first transitions into a temporary + `aborting' state. + + A script which has finished its execution is `terminated'." + ::= { smRunEntry 10 } + +smRunError OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object contains a descriptive error message if the + script startup or execution raised an abnormal condition. + An implementation must store a descriptive error message + in this object if the script exits with the smRunExitCode + `genericError'." + DEFVAL { ''H } + ::= { smRunEntry 11 } + +smRunResultTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the smRunResult was last updated. + The value '0000000000000000'H is returned if smRunResult + has not yet been updated after the creation of this + smRunTable entry." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 12 } + +smRunErrorTime OBJECT-TYPE + SYNTAX DateAndTime + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The date and time when the smRunError was last updated. + The value '0000000000000000'H is returned if smRunError + + has not yet been updated after the creation of this + smRunTable entry." + DEFVAL { '0000000000000000'H } + ::= { smRunEntry 13 } + +-- +-- Notifications. The definition of smTraps makes notification +-- registrations reversible (see STD 58, RFC 2578). +-- + +smTraps OBJECT IDENTIFIER ::= { smNotifications 0 } + +smScriptAbort NOTIFICATION-TYPE + OBJECTS { smRunExitCode, smRunEndTime, smRunError } + STATUS current + DESCRIPTION + "This notification is generated whenever a running script + terminates with an smRunExitCode unequal to `noError'." + ::= { smTraps 1 } + +smScriptResult NOTIFICATION-TYPE + OBJECTS { smRunResult } + STATUS current + DESCRIPTION + "This notification can be used by scripts to notify other + management applications about results produced by the + script. + + This notification is not automatically generated by the + Script MIB implementation. It is the responsibility of + the executing script to emit this notification where it + is appropriate to do so." + ::= { smTraps 2 } + +smScriptException NOTIFICATION-TYPE + OBJECTS { smRunError } + STATUS current + DESCRIPTION + "This notification can be used by scripts to notify other + management applications about script errors. + + This notification is not automatically generated by the + Script MIB implementation. It is the responsibility of + the executing script or the runtime system to emit this + notification where it is appropriate to do so." + ::= { smTraps 3 } + +-- conformance information + +smCompliances OBJECT IDENTIFIER ::= { smConformance 1 } +smGroups OBJECT IDENTIFIER ::= { smConformance 2 } + +-- compliance statements + +smCompliance2 MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for SNMP entities which implement + the Script MIB." + MODULE -- this module + MANDATORY-GROUPS { + smLanguageGroup, smScriptGroup2, smLaunchGroup2, + smRunGroup2, smNotificationsGroup2 + } + GROUP smCodeGroup + DESCRIPTION + "The smCodeGroup is mandatory only for those implementations + that support the downloading of scripts via SNMP." + OBJECT smScriptSource + MIN-ACCESS read-only + DESCRIPTION + "The smScriptSource object is read-only for implementations + that are not able to download script code from a URL." + OBJECT smCodeText + DESCRIPTION + "A compliant implementation need only support write access to + the smCodeText object only during row creation." + OBJECT smLaunchArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smLaunchArgument of 255 octets." + OBJECT smRunArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunArgument of 255 octets." + OBJECT smRunResult + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunResult of 255 octets." + OBJECT smRunState + DESCRIPTION + "A compliant implementation does not have to support script + suspension and the smRunState `suspended'. Such an + implementation will change into the `suspending' state + when the smRunControl is set to `suspend' and remain in this + state until smRunControl is set to `resume' or the script + terminates." + ::= { smCompliances 2 } + +smLanguageGroup OBJECT-GROUP + OBJECTS { + smLangLanguage, smLangVersion, + smLangVendor, smLangRevision, + smLangDescr, smExtsnExtension, + smExtsnVersion, smExtsnVendor, + smExtsnRevision, smExtsnDescr + } + STATUS current + DESCRIPTION + "A collection of objects providing information about the + capabilities of the scripting engine." + ::= { smGroups 1 } + +smScriptGroup2 OBJECT-GROUP + OBJECTS { + smScriptDescr, smScriptLanguage, + smScriptSource, smScriptAdminStatus, + smScriptOperStatus, smScriptStorageType, + smScriptRowStatus, smScriptError, + smScriptLastChange + } + STATUS current + DESCRIPTION + "A collection of objects providing information about + installed scripts." + ::= { smGroups 7 } + +smCodeGroup OBJECT-GROUP + OBJECTS { + smCodeText, smCodeRowStatus + } + STATUS current + DESCRIPTION + "A collection of objects used to download or modify scripts + by using SNMP set requests." + ::= { smGroups 3 } + +smLaunchGroup2 OBJECT-GROUP + OBJECTS { + smLaunchScriptOwner, smLaunchScriptName, + smLaunchArgument, smLaunchMaxRunning, + smLaunchMaxCompleted, smLaunchLifeTime, + smLaunchExpireTime, smLaunchStart, + smLaunchControl, smLaunchAdminStatus, + smLaunchOperStatus, smLaunchRunIndexNext, + smLaunchStorageType, smLaunchRowStatus, + smLaunchError, smLaunchLastChange, + smLaunchRowExpireTime + } + STATUS current + DESCRIPTION + "A collection of objects providing information about scripts + that can be launched." + ::= { smGroups 8 } + +smRunGroup2 OBJECT-GROUP + OBJECTS { + smRunArgument, smRunStartTime, + smRunEndTime, smRunLifeTime, + smRunExpireTime, smRunExitCode, + smRunResult, smRunState, + smRunControl, smRunError, + smRunResultTime, smRunErrorTime + } + STATUS current + DESCRIPTION + "A collection of objects providing information about running + scripts." + ::= { smGroups 9 } + +smNotificationsGroup2 NOTIFICATION-GROUP + NOTIFICATIONS { + smScriptAbort, + smScriptResult, + smScriptException + } + STATUS current + DESCRIPTION + "The notifications emitted by the Script MIB." + ::= { smGroups 10 } + +-- +-- Deprecated compliance and conformance group definitions +-- from RFC 2592. +-- + +smCompliance MODULE-COMPLIANCE + STATUS deprecated + DESCRIPTION + "The compliance statement for SNMP entities which implement + the Script MIB." + MODULE -- this module + MANDATORY-GROUPS { + + smLanguageGroup, smScriptGroup, smLaunchGroup, smRunGroup + } + GROUP smCodeGroup + DESCRIPTION + "The smCodeGroup is mandatory only for those implementations + that support the downloading of scripts via SNMP." + OBJECT smScriptSource + MIN-ACCESS read-only + DESCRIPTION + "The smScriptSource object is read-only for implementations + that are not able to download script code from a URL." + OBJECT smCodeText + DESCRIPTION + "A compliant implementation need only support write access + to the smCodeText object during row creation." + OBJECT smLaunchArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smLaunchArgument of 255 octets." + OBJECT smRunArgument + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunArgument of 255 octets." + OBJECT smRunResult + DESCRIPTION + "A compliant implementation has to support a minimum size + for smRunResult of 255 octets." + OBJECT smRunState + DESCRIPTION + "A compliant implementation does not have to support script + suspension and the smRunState `suspended'. Such an + implementation will change into the `suspending' state + when the smRunControl is set to `suspend' and remain in this + state until smRunControl is set to `resume' or the script + terminates." + ::= { smCompliances 1 } + +smScriptGroup OBJECT-GROUP + OBJECTS { + smScriptDescr, smScriptLanguage, + smScriptSource, smScriptAdminStatus, + smScriptOperStatus, smScriptStorageType, + smScriptRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about + installed scripts." + ::= { smGroups 2 } + +smLaunchGroup OBJECT-GROUP + OBJECTS { + smLaunchScriptOwner, smLaunchScriptName, + smLaunchArgument, smLaunchMaxRunning, + smLaunchMaxCompleted, smLaunchLifeTime, + smLaunchExpireTime, smLaunchStart, + smLaunchControl, smLaunchAdminStatus, + smLaunchOperStatus, smLaunchRunIndexNext, + smLaunchStorageType, smLaunchRowStatus + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about scripts + that can be launched." + ::= { smGroups 4 } + +smRunGroup OBJECT-GROUP + OBJECTS { + smRunArgument, smRunStartTime, + smRunEndTime, smRunLifeTime, + smRunExpireTime, smRunExitCode, + smRunResult, smRunState, + smRunControl, smRunError + } + STATUS deprecated + DESCRIPTION + "A collection of objects providing information about running + scripts." + ::= { smGroups 5 } + +smNotificationsGroup NOTIFICATION-GROUP + NOTIFICATIONS { + smScriptAbort, + smScriptResult + } + STATUS deprecated + DESCRIPTION + "The notifications emitted by the Script MIB." + ::= { smGroups 6 } + +END |