summaryrefslogtreecommitdiff
path: root/scripts/install
AgeCommit message (Collapse)Author
2023-11-15Merge pull request #214 from erkin/currentChristian Breunig
remote: T5726: Replace the download procedure call
2023-11-14remote: T5726: Replace the download procedure callerkin
2023-09-21Merge pull request #203 from zdc/T4776-sagittaJohn Estabrook
installer: T4776: Fixed installation on NVME in RAID-1 mode
2023-08-28T5520: avoid cp from /config during update, after coreutils changeJohn Estabrook
A change in behaviour of coreutils 'cp' reveals a problem when doing a 'cp -a' from the bind mount /config; use /opt/vyatta/etc/config instead.
2023-08-21installer: T4776: Fixed installation on NVME in RAID-1 modezsdc
This change fixes installation into two NVME devices. It should be considered as a temporary solution before migration to the new installer.
2023-04-03T5136: do not rm -rf if unmount failsChristian Breunig
Commit f34e9028 ("T5136: properly unmount filesystems after installation") assumed it would be a good idea to simply rm -rf the new root folder. This could have a bad, non booting side effect. Warn user if unmount fails but the filesystem is synced anyway. The rest is handled by the Kernel on reboot.
2023-04-02T5136: properly unmount filesystems after installationChristian Breunig
2022-11-15T4822: install the correct version of GRUB for architecture (arm64)Mathew McBride
Fix a hardcoded x86_64-efi reference, and ensure the correct GRUB binary package is installed
2022-10-27nvme: T4776: Fixed installation to NVMEzsdc
* fixed NVME drive names parser * replaced partition parser to take into account `p` suffixes on NVME partitions
2022-06-21Make next steps after install more clearDaniel Husand
2022-02-25Revert "install: T4262: Fix root partition size for UEFI installs"Christian Poessinger
This reverts commit 1155d46711d54c566b3171b94c6e1281ec3dadd0. This breaks non-UEFI installs
2022-02-24install: T4262: Fix root partition size for UEFI installssarthurdev
2021-12-01T2076: RAID install: sfdisk change-id is deprecated in favor of --part-typeKim Hagen
T1869: Install and Boot from RAID Doesn't Work T1126: Reusing a RAID from a BIOS install in an EFI install causes a failure to boot
2021-11-22T1869: Install and Boot from RAID Doesn't WorkKim Hagen
2021-11-19T1153: VyOS 1.2.0RC10, RAID-1, fresh install, unable to save configEquuleus ↵Kim
(#159) * add search for same drive size if more than 2 drives are installed * add ability to configure RAID-1 by selecting 2 drives * cleaning up sysconf/filecaps rights * cleaning up sysconf/filecaps rights xtables-monitor (cherry picked from commit 3cc31793d57ce05421300ce4e8a1a1352291db85)
2021-10-16gpg: T3879: fix signature validationChristian Poessinger
(cherry picked from commit 217c4b5c165e9e8a64bfe82d3ddade256b0990e0)
2021-09-06install-image: T2108: use minisign backup key if primary key failsChristian Poessinger
(cherry picked from commit 0c5edf1ced2872c495b190977db575deaf28fa1c)
2021-09-06install-image: remove whitespaces after .Christian Poessinger
(cherry picked from commit c36db1614b60fc180d016fd3b7f64d9342a503a6)
2021-09-03T1785: Deleting partitions on disks (Raid1) with default value 'no'Kim Hagen
the default was still set to "Yes"
2021-08-26install-image: T2108: verify image by using minisign over GPGChristian Poessinger
We will first download and try to verify the image using the generated minisign signature. If this fails, we try to retrieve the GPG signature file.
2021-08-08T169: Image install should put correct serial console device in created grub ↵Kim Hagen
menuentry
2021-06-13T3356: Remove redundant error messageerkin
2021-05-18T3356: remote: Read username and password from environment variableserkin
2021-05-18T3356: Switch install-image from curl to remote.pyerkin
2021-05-10T3351: Check for SHA256 filesLulu Cathrinus Grimalkin
Fall back to MD5 if SHA256 checksums could not be found Don't bother downloading .iso.sha256 files
2020-12-30migration: T3161: remove scripts ec2-vyos-init, ec2-check.plJohn Estabrook
These scripts have been superseded by the cloud-init tools, and contain legacy references to XorpConfigParser.pm (via vyatta-cfg/scripts/vyatta-load-config.pl, via ConfigLoad.pm), which one would like to retire.
2020-11-27vyatta-cfg: T2713: Return original permissions for config-auth files in updatesever-sever
2020-10-28image: T3027: do not rely on the ISO filename when calculating sha256 hashChristian Poessinger
Updating a running VyOS installation by using the "add system image" command pointing to https://downloads.vyos.io/rolling/current/amd64/vyos-rolling-latest.iso will break the validation due to filename missmatch. The root cause for this is the sha256 checksum file itself. It contains the hash and the filename used when hashing. When running "sha256sum --check" during the upgrade it expects the "real" filename when calculating and verifying the hash. The real filename differs when using the vyos-rolling-latest.iso symlink on the webserver as it will tell the running VyOS installation a different filename and the validation fails. This is now fixed by not depending on the filename when verifying the hash. We simply calculate the hash of the downloaded file and compare it to the has we saved inside the checksum file and totally ignore the filename itself.
2020-10-18image: T2992: automatically verify sha256 checksum on ISO downloadChristian Poessinger
Good: ===== vyos@vyos:~$ add system image http://foo.com/vyos-1.3-rolling-202010180826-amd64.iso Trying to fetch ISO file from http://foo.com/vyos-1.3-rolling-202010180826-amd64.iso % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 309M 100 309M 0 0 25.1M 0 0:00:12 0:00:12 --:--:-- 25.2M ISO download succeeded. Checking SHA256 (256-bit) checksum... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 106 100 106 0 0 26500 0 --:--:-- --:--:-- --:--:-- 26500 Found it. Verifying checksum... SHA256 checksum valid. Checking for digital signature file... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 curl: (22) The requested URL returned error: 404 Not Found Unable to fetch digital signature file. Do you want to continue without signature check? (yes/no) [yes] Bad: ==== vyos@vyos:~$ add system image http://foo.com/vyos-1.3-rolling-202010180826-amd64.iso Trying to fetch ISO file from http://foo.com/vyos-1.3-rolling-202010180826-amd64.iso % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 309M 100 309M 0 0 25.8M 0 0:00:11 0:00:11 --:--:-- 25.8M ISO download succeeded. Checking SHA256 (256-bit) checksum... % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 106 100 106 0 0 9636 0 --:--:-- --:--:-- --:--:-- 9636 Found it. Verifying checksum... vyos-1.3-rolling-202010180826-amd64.iso: FAILED sha256sum: WARNING: 1 computed checksum did NOT match Signature check FAILED. Installation will not be performed. Exiting...
2020-09-26cfg-system: T2902: Fix regex that doesnt allow X in image namesever-sever
2020-08-23install-image: T2690: T2762: always run in default VRF unless specifiedChristian Poessinger
When you connect via SSH and run the "add system image" command, it is launched inside the VRF you are currently connected to. This might become confusing as the VRF context changes. Change command to always run in "default" vrf unless "add system image" command is invoked with the vrf option.
2020-08-01install-image: T2690: add VRF support when installing new imagesChristian Poessinger
2020-08-01install-image: T2753: add named command line optionsChristian Poessinger
This makes it easier to add VRF support.
2020-01-13install: T1940, fix unbootable EFI, 4kn compatibilitykroy
2019-12-06Merge branch 'current' of github.com:vyos/vyatta-cfg-system into equuleusChristian Poessinger
* 'current' of github.com:vyos/vyatta-cfg-system: syslog: T1845: migration script support bumps system to 12 syslog: T1845: migration script support bumps system to 12 Revert "syslog: T1845 bumping system version for migration script" syslog: T1845 bumping system version for migration script Fix rootdev regex to support mmcblk devices geneve: T1799: add Generic Network Virtualization Encapsulation
2019-12-03Fix rootdev regex to support mmcblk devicesRobert Edström
2019-10-21Merge branch 'current' into equuleushagbard
Auto-merging scripts/rl-system.init Auto-merging scripts/install/install-image Auto-merging Jenkinsfile
2019-10-18[system-proxy]: T1741 - Add system wide proxy settinghagbard
2019-10-08install-image: T1718 - ISO check in /opt/vyatta/sbin/install-image faultyhagbard
2019-06-18[ installer ] T1446: on installing with efi skip theKim Hagen
xen extra checks, they use dmidecode which will not work in efi mode Get the UUID of the correct partition based on the install type (bios/efi)
2019-06-12fix if statementKim Hagen
2019-06-12Force create raid without answering the question if you want to create it.Kim Hagen
Update initramfs to include raidconfig avoiding md127 being created on reboot.
2019-04-23T1327: Set the serial console speed to 115200 by defaultJohn Estabrook
Set the default serial console speed to 115200 in system update scripts, to accord with the changes in the build scripts.
2019-04-10T1329: support installation on SD cards fixKim
2019-03-27T1296: support installation on SD cardsChristian Poessinger
2018-12-03T1047: look for a saved config in the "real" config dir at install timeDaniil Baturin
(i.e. not the bind-mounted /config).
2018-12-01EFI Cleanup. Adding removable option to grub-installKroy
2018-11-09Cleanup output (#85)Kim
2018-11-07Add uefi install option. (#84)Kim
* Add grub-efi package dependencies * Install grub-efi if we install on efi partition
2018-11-06T955: Integrating EFI into the installerKroy
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-19 22:55:28 +0000