summaryrefslogtreecommitdiff
path: root/data
diff options
context:
space:
mode:
authorChristian Poessinger <christian@poessinger.com>2020-08-13 18:31:08 +0200
committerChristian Poessinger <christian@poessinger.com>2020-08-15 15:02:00 +0000
commitb082a6fb211ef19d75c4c81414be9aa1b9248b45 (patch)
tree85ee394234198a669c4be22cc97f1e2f3ab5050b /data
parent8efb8ba1efa9d51ec376bac0bfcb48cf200447a9 (diff)
downloadvyos-1x-b082a6fb211ef19d75c4c81414be9aa1b9248b45.tar.gz
vyos-1x-b082a6fb211ef19d75c4c81414be9aa1b9248b45.zip
lcd: T2564: flatten CLI interface
* set system lcd device <device> * set system lcd model <modeml> Both device and model have completion helpers for supported interfaces and LCD displays.
Diffstat (limited to 'data')
-rw-r--r--data/templates/lcd/LCDd.conf.tmpl126
-rw-r--r--data/templates/lcd/lcdproc.conf.tmpl60
-rw-r--r--data/templates/system-display/LCDd.conf.tmpl1500
-rw-r--r--data/templates/system-display/lcdproc.conf.tmpl173
4 files changed, 186 insertions, 1673 deletions
diff --git a/data/templates/lcd/LCDd.conf.tmpl b/data/templates/lcd/LCDd.conf.tmpl
new file mode 100644
index 000000000..da749d04a
--- /dev/null
+++ b/data/templates/lcd/LCDd.conf.tmpl
@@ -0,0 +1,126 @@
+### Autogenerted by system-display.py ##
+
+# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
+#
+# This file contains the configuration for the LCDd server.
+#
+# The format is ini-file-like. It is divided into sections that start at
+# markers that look like [section]. Comments are all line-based comments,
+# and are lines that start with '#' or ';'.
+#
+# The server has a 'central' section named [server]. For the menu there is
+# a section called [menu]. Further each driver has a section which
+# defines how the driver acts.
+#
+# The drivers are activated by specifying them in a driver= line in the
+# server section, like:
+#
+# Driver=curses
+#
+# This tells LCDd to use the curses driver.
+# The first driver that is loaded and is capable of output defines the
+# size of the display. The default driver to use is curses.
+# If the driver is specified using the -d <driver> command line option,
+# the Driver= options in the config file are ignored.
+#
+# The drivers read their own options from the respective sections.
+
+## Server section with all kinds of settings for the LCDd server ##
+[server]
+
+# Where can we find the driver modules ?
+# NOTE: Always place a slash as last character !
+DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/
+
+# Tells the server to load the given drivers. Multiple lines can be given.
+# The name of the driver is case sensitive and determines the section
+# where to look for further configuration options of the specific driver
+# as well as the name of the dynamic driver module to load at runtime.
+# The latter one can be changed by giving a File= directive in the
+# driver specific section.
+#
+# The following drivers are supported:
+# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba,
+# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior,
+# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800,
+# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD,
+# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330,
+# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963,
+# text, tyan, ula200, vlsys_m428, xosd, yard2LCD
+
+{% if model is defined and model.startswith('CFA-') %}
+Driver=CFontzPacket
+{% endif %}
+
+# Tells the driver to bind to the given interface. [default: 127.0.0.1]
+Bind=127.0.0.1
+
+# Listen on this specified port. [default: 13666]
+Port=13666
+
+# Sets the reporting level; defaults to warnings and errors only.
+# [default: 2; legal: 0-5]
+ReportLevel=3
+
+# Should we report to syslog instead of stderr? [default: no; legal: yes, no]
+ReportToSyslog=yes
+
+# User to run as. LCDd will drop its root privileges and run as this user
+# instead. [default: nobody]
+User=nobody
+
+# The server will stay in the foreground if set to yes.
+# [default: no, legal: yes, no]
+Foreground=yes
+
+# Hello message: each entry represents a display line; default: builtin
+Hello="Starting VyOS"
+Hello=" ... "
+
+# GoodBye message: each entry represents a display line; default: builtin
+GoodBye=" VyOS shutting"
+GoodBye=" down... "
+
+# Sets the interval in microseconds for updating the display.
+# [default: 125000 meaning 8Hz]
+FrameInterval=250000 # 4 updates per second
+
+# Sets the default time in seconds to displays a screen. [default: 4]
+WaitTime=1
+
+# If set to no, LCDd will start with screen rotation disabled. This has the
+# same effect as if the ToggleRotateKey had been pressed. Rotation will start
+# if the ToggleRotateKey is pressed. Note that this setting does not turn off
+# priority sorting of screens. [default: on; legal: on, off]
+AutoRotate=on
+
+# If yes, the the serverscreen will be rotated as a usual info screen. If no,
+# it will be a background screen, only visible when no other screens are
+# active. The special value 'blank' is similar to no, but only a blank screen
+# is displayed. [default: on; legal: on, off, blank]
+ServerScreen=blank
+
+# Set master backlight setting. If set to 'open' a client may control the
+# backlight for its own screens (only). [default: open; legal: off, open, on]
+Backlight=on
+
+# Set master heartbeat setting. If set to 'open' a client may control the
+# heartbeat for its own screens (only). [default: open; legal: off, open, on]
+Heartbeat=off
+
+# set title scrolling speed [default: 10; legal: 0-10]
+TitleSpeed=10
+
+{% if model is defined and model is not none %}
+{% if model.startswith('CFA-') %}
+## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ##
+[CFontzPacket]
+Model={{ model.split('-')[1] }}
+Device={{ device }}
+Contrast=350
+Brightness=500
+OffBrightness=50
+Reboot=yes
+USB=yes
+{% endif %}
+{% endif %}
diff --git a/data/templates/lcd/lcdproc.conf.tmpl b/data/templates/lcd/lcdproc.conf.tmpl
new file mode 100644
index 000000000..c79f3cd0d
--- /dev/null
+++ b/data/templates/lcd/lcdproc.conf.tmpl
@@ -0,0 +1,60 @@
+### autogenerated by system-lcd.py ###
+
+# LCDproc client configuration file
+
+[lcdproc]
+Server=127.0.0.1
+Port=13666
+
+# set reporting level
+ReportLevel=3
+
+# report to to syslog ?
+ReportToSyslog=true
+
+Foreground=yes
+
+[CPU]
+Active=true
+OnTime=1
+OffTime=2
+ShowInvisible=false
+
+[SMP-CPU]
+Active=false
+
+[Memory]
+Active=false
+
+[Load]
+Active=false
+
+[Uptime]
+Active=true
+
+[ProcSize]
+Active=false
+
+[Disk]
+Active=false
+
+[About]
+Active=false
+
+[TimeDate]
+Active=true
+TimeFormat="%H:%M:%S"
+
+[OldTime]
+Active=false
+
+[BigClock]
+Active=false
+
+[MiniClock]
+Active=false
+
+# Display the title bar in two-line mode. Note that with four lines or more
+# the title is always shown. [default: true; legal: true, false]
+ShowTitle=false
+
diff --git a/data/templates/system-display/LCDd.conf.tmpl b/data/templates/system-display/LCDd.conf.tmpl
deleted file mode 100644
index 1dd646202..000000000
--- a/data/templates/system-display/LCDd.conf.tmpl
+++ /dev/null
@@ -1,1500 +0,0 @@
-### Autogenerted by system-display.py ##
-# LCDd.conf -- configuration file for the LCDproc server daemon LCDd
-#
-# This file contains the configuration for the LCDd server.
-#
-# The format is ini-file-like. It is divided into sections that start at
-# markers that look like [section]. Comments are all line-based comments,
-# and are lines that start with '#' or ';'.
-#
-# The server has a 'central' section named [server]. For the menu there is
-# a section called [menu]. Further each driver has a section which
-# defines how the driver acts.
-#
-# The drivers are activated by specifying them in a driver= line in the
-# server section, like:
-#
-# Driver=curses
-#
-# This tells LCDd to use the curses driver.
-# The first driver that is loaded and is capable of output defines the
-# size of the display. The default driver to use is curses.
-# If the driver is specified using the -d <driver> command line option,
-# the Driver= options in the config file are ignored.
-#
-# The drivers read their own options from the respective sections.
-
-
-
-## Server section with all kinds of settings for the LCDd server ##
-[server]
-
-# Where can we find the driver modules ?
-# IMPORTANT: Make sure to change this setting to reflect your
-# specific setup! Otherwise LCDd won't be able to find
-# the driver modules and will thus not be able to
-# function properly.
-# NOTE: Always place a slash as last character !
-DriverPath=/usr/lib/x86_64-linux-gnu/lcdproc/
-
-# Tells the server to load the given drivers. Multiple lines can be given.
-# The name of the driver is case sensitive and determines the section
-# where to look for further configuration options of the specific driver
-# as well as the name of the dynamic driver module to load at runtime.
-# The latter one can be changed by giving a File= directive in the
-# driver specific section.
-#
-# The following drivers are supported:
-# bayrad, CFontz, CFontzPacket, curses, CwLnx, ea65, EyeboxOne, futaba,
-# g15, glcd, glcdlib, glk, hd44780, icp_a106, imon, imonlcd,, IOWarrior,
-# irman, joy, lb216, lcdm001, lcterm, linux_input, lirc, lis, MD8800,
-# mdm166a, ms6931, mtc_s16209x, MtxOrb, mx5000, NoritakeVFD,
-# Olimex_MOD_LCD1x9, picolcd, pyramid, rawserial, sdeclcd, sed1330,
-# sed1520, serialPOS, serialVFD, shuttleVFD, sli, stv5730, svga, t6963,
-# text, tyan, ula200, vlsys_m428, xosd, yard2LCD
-{%- if model == 'sdec' %}
-Driver=sdeclcd
-{%- endif %}
-
-{%- if model == 'ezio' %}
-Driver=hd44780
-{%- endif %}
-
-{%- if model == 'test' %}
-Driver=CFontzPacket
-{%- endif %}
-
-# Tells the driver to bind to the given interface. [default: 127.0.0.1]
-#Bind=127.0.0.1
-
-# Listen on this specified port. [default: 13666]
-#Port=13666
-
-# Sets the reporting level; defaults to warnings and errors only.
-# [default: 2; legal: 0-5]
-#ReportLevel=3
-
-# Should we report to syslog instead of stderr? [default: no; legal: yes, no]
-#ReportToSyslog=yes
-
-# User to run as. LCDd will drop its root privileges and run as this user
-# instead. [default: nobody]
-User=nobody
-
-# The server will stay in the foreground if set to yes.
-# [default: no, legal: yes, no]
-#Foreground=yes
-
-# Hello message: each entry represents a display line; default: builtin
-Hello="{%- if hello %}{{ hello }}{%- else %}Welcome to VyOS{%- endif %}"
-
-# GoodBye message: each entry represents a display line; default: builtin
-GoodBye="{%- if bye %}{{ bye }}{%- else %}Bye from VyOS{%- endif %}"
-
-# Sets the interval in microseconds for updating the display.
-# [default: 125000 meaning 8Hz]
-#FrameInterval=125000
-
-# Sets the default time in seconds to displays a screen. [default: 4]
-WaitTime={%- if time %}{{ time }}{%- else%}4{%- endif %}
-
-# If set to no, LCDd will start with screen rotation disabled. This has the
-# same effect as if the ToggleRotateKey had been pressed. Rotation will start
-# if the ToggleRotateKey is pressed. Note that this setting does not turn off
-# priority sorting of screens. [default: on; legal: on, off]
-#AutoRotate=off
-
-# If yes, the the serverscreen will be rotated as a usual info screen. If no,
-# it will be a background screen, only visible when no other screens are
-# active. The special value 'blank' is similar to no, but only a blank screen
-# is displayed. [default: on; legal: on, off, blank]
-ServerScreen=no
-
-# Set master backlight setting. If set to 'open' a client may control the
-# backlight for its own screens (only). [default: open; legal: off, open, on]
-#Backlight=open
-
-# Set master heartbeat setting. If set to 'open' a client may control the
-# heartbeat for its own screens (only). [default: open; legal: off, open, on]
-#Heartbeat=open
-
-# set title scrolling speed [default: 10; legal: 0-10]
-#TitleSpeed=10
-
-# The "...Key=" lines define what the server does with keypresses that
-# don't go to any client. The ToggleRotateKey stops rotation of screens, while
-# the PrevScreenKey and NextScreenKey go back / forward one screen (even if
-# rotation is disabled.
-# Assign the key string returned by the driver to the ...Key setting. These
-# are the defaults:
-ToggleRotateKey=Enter
-PrevScreenKey=Left
-NextScreenKey=Right
-#ScrollUpKey=Up
-#ScrollDownKey=Down
-
-## The menu section. The menu is an internal LCDproc client. ##
-[menu]
-# If true the server allows transitions between different client's menus
-# [default: false; legal: true, false]
-#PermissiveGoto=false
-
-# You can configure what keys the menu should use. Note that the MenuKey
-# will be reserved exclusively, the others work in shared mode.
-
-# Up to six keys are supported. The MenuKey (to enter and exit the menu), the
-# EnterKey (to select values) and at least one movement keys are required.
-# These are the default key assignments:
-MenuKey=Escape
-EnterKey=Enter
-UpKey=Up
-DownKey=Down
-#LeftKey=Left
-#RightKey=Right
-
-
-### Driver sections are below this line, in alphabetical order ###
-
-
-## EMAC BayRAD driver ##
-[bayrad]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200]
-Speed=9600
-
-
-
-## CrystalFontz driver (for CF632 & CF634) ##
-[CFontz]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-# Select the LCD size [default: 20x4]
-Size=20x4
-# Set the initial contrast [default: 560; legal: 0 - 1000]
-Contrast=350
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-# Set the communication speed [default: 9600; legal: 1200, 2400, 9600, 19200,
-# 115200]
-Speed=9600
-# Set the firmware version (New means >= 2.0) [default: no; legal: yes, no]
-NewFirmware=no
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-
-
-## CrystalFontz packet driver (for CFA533, CFA631, CFA633 & CFA635) ##
-[CFontzPacket]
-{%- if model == 'test' %}
-Model=533
-Device=/dev/serial/by-bus/usb0b1.1p1.0
-Contrast=350
-Brightness=1000
-OffBrightness=50
-Reboot=yes
-USB=yes
-{%- endif %}
-
-
-## Curses driver ##
-[curses]
-
-# color settings
-# foreground color [default: blue]
-Foreground=blue
-# background color when "backlight" is off [default: cyan]
-Background=cyan
-# background color when "backlight" is on [default: red]
-Backlight=red
-
-# display size [default: 20x4]
-Size=20x2
-
-# What position (X,Y) to start the left top corner at...
-# Default: (7,7)
-TopLeftX=7
-TopLeftY=7
-
-# use ASC symbols for icons & bars [default: no; legal: yes, no]
-UseACS=no
-
-# draw Border [default: yes; legal: yes, no]
-DrawBorder=yes
-
-
-
-## Cwlinux driver ##
-[CwLnx]
-
-# Select the LCD model [default: 12232; legal: 12232, 12832, 1602]
-Model=12232
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-# Select the LCD size. Default depends on model:
-# 12232: 20x4
-# 12832: 21x4
-# 1602: 16x2
-Size=20x4
-
-# Set the communication speed [default: 19200; legal: 9600, 19200]
-Speed=19200
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-# normally you shouldn't need this
-Reboot=no
-
-# If you have a keypad connected. Keypad layout is currently not
-# configureable from the config file.
-Keypad=yes
-
-# If you have a non-standard keypad you can associate any keystrings to keys.
-# There are 6 input keys in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following is the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-# keypad_test_mode permits one to test keypad assignment
-# Default value is no
-#keypad_test_mode=yes
-
-
-
-## ea65 driver for the display in AOpen XC Cube AV EA65 media barebones ##
-[ea65]
-
-# Device is fixed /dev/ttyS1
-# Width and Height are fixed 9x1
-
-# As the VFD is self luminescent we don't have a backlight
-# But we can use the backlight functions to control the front LEDs
-# Brightness 0 to 299 -> LEDs off
-# Brightness 300 to 699 -> LEDs half bright
-# Brightness 700 to 1000 -> LEDs full bright
-Brightness=500
-# OffBrightness is the the value used for the 'backlight off' state
-OffBrightness=0
-
-
-
-## EyeboxOne driver ##
-[EyeboxOne]
-
-# Select the output device to use [default: /dev/ttyS1]
-# Device=/dev/cua01
-Device=/dev/ttyS1
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Switch on the backlight? [default: yes]
-Backlight=yes
-
-# Switch on the cursor? [default: no]
-Cursor=no
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Enter Key is a \r character, so it's hardcoded in the driver
-LeftKey=D
-RightKey=C
-UpKey=A
-DownKey=B
-EscapeKey=P
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-## Futaba TOSD-5711BB VFD Driver ##
-[futaba]
-
-## g15 driver for Logitech G15 Keyboard LCDs ##
-[g15]
-
-# Display size (currently unused)
-size=20x5
-
-
-
-## glcd generic graphical display driver
-[glcd]
-# Select what type of connection. See documentation for types.
-ConnectionType=t6963
-
-# Width and height of the display in pixel. The supported sizes may depend on
-# the ConnectionType. [default: 128x64; legal: 1x1 - 640x480]
-#Size=128x64
-
-# Width and height of a character cell in pixels. This value is only used if
-# the driver has been compiled with FreeType and it is enabled. Otherwise the
-# default 6x8 cell is used.
-#CellSize=12x16
-
-# If LCDproc has been compiled with FreeType 2 support this option can be used
-# to turn if off intentionally. [default: yes; legal: yes, no]
-#useFT2=no
-
-# Path to font file to use for FreeType rendering. This font must be monospace
-# and should contain some special Unicode characters like arrows (Andale Mono
-# is recommended and can be fetched at http://corefonts.sf.net).
-#normal_font=/usr/local/lib/X11/fonts/TTF/andalemo.ttf
-
-# Some fonts miss the Unicode characters used to represent icons. In this case
-# the built-in 5x8 font can used if this option is turned off. [default: yes;
-# legal: yes, no]
-#fontHasIcons=no
-
-# Set the initial contrast if supported by connection type.
-# [default: 600; legal: 0 - 1000]
-#Contrast=600
-
-# Set brightness of the backlight if the backlight is switched 'on'.
-# [default: 800; legal: 0 - 1000]
-#Brightness=1000
-
-# Set brightness of the backlight if the backlight is switched 'off'. Set this
-# to zero to completely turn off the backlight. [default: 100; legal: 0 - 1000]
-#OffBrightness=0
-
-# Time (ms) from first key report to first repeat. Set to 0 to disable repeated
-# key reports. [default: 500; legal: 0 - 3000]
-#KeyRepeatDelay=500
-
-# Time (ms) between repeated key reports. Ignored if KeyRepeatDelay is disabled
-# (set to zero). [default: 300; legal: 0 - 3000]
-#KeyRepeatInterval=300
-
-# Assign key strings to keys. There may be up to 16 keys numbered 'A' to 'Z'.
-# By default keys 'A' to 'F' are assigned Up, Down, Left, Right, Enter, Escape.
-KeyMap_A=Up
-KeyMap_B=Down
-KeyMap_C=Enter
-KeyMap_D=Escape
-
-# --- t6963 options ---
-
-# Parallel port to use [default: 0x378; legal: 0x200 - 0x400]
-#Port=0x378
-
-# Use LPT port in bi-directional mode. This should work on most LPT port
-# and is required for proper timing! [default: yes; legal: yes, no]
-#bidirectional=yes
-
-# Insert additional delays into reads / writes. [default: no; legal: yes, no]
-#delayBus=no
-
-# --- serdisplib options ---
-
-# Name of the underlying serdisplib driver, e.g. ctinclud. See
-# serdisplib documentation for details.
-serdisp_name=t6963
-
-# The display device to use, e.g. serraw:/dev/ttyS0,
-# parport:/dev/parport0 or USB:07c0/1501.
-serdisp_device=/dev/ppi0
-
-# Options string to pass to serdisplib during initialization. Use
-# this to set any display related options (e.g. wiring). The display size is
-# always set based on the Size configured above! By default, no options are
-# set.
-# Important: The value must be quoted as it contains equal signs!
-#serdisp_options="INVERT=1"
-
-# --- x11 options ---
-
-# PixelSize is size of each dot in pixels + a pixel gap. [default: 3+1]
-#x11_PixelSize=3+1
-
-# Colors are in RRGGBB format prefixed with "0x".
-# PixelColor: The color of each dot at full contrast. [default: 0x000000]
-#x11_PixelColor=0x000000
-
-# BacklightColor: The color of the backlight as full brightness.
-# [default: 0x80FF80]
-#x11_BacklightColor=0x80FF80
-
-# Border: Adds a border (empty space) around the LCD portion of X11 window.
-# [default: 20]
-#x11_Border=20
-
-# Inverted: inverts the pixels [default: no; legal: yes, no]
-#x11_Inverted=no
-
-# --- picolcdgfx options ---
-
-# Time in ms for usb_read to wait on a key press. [default: 125; legal: >0]
-#picolcdgfx_KeyTimeout=125
-
-# Inverted: Inverts the pixels. [default: no; legal: yes or no]
-#picolcdgfx_Inverted=no
-
-
-
-## glcdlib meta driver for graphical LCDs ##
-[glcdlib]
-
-## mandatory:
-
-# which graphical display supported by graphlcd-base to use [default: image]
-# (see /etc/graphlcd.conf for possible drivers)
-Driver=noritake800
-
-# no=use graphlcd bitmap fonts (they have only one size / font file)
-# yes=use fonts supported by FreeType2 (needs Freetype2 support in
-# libglcdprocdriver and its dependants)
-UseFT2=yes
-
-# text resolution in fixed width characters [default: 16x4]
-# (if it won't fit according to available physical pixel resolution
-# and the minimum available font face size in pixels, then
-# 'DebugBorder' will automatically be turned on)
-TextResolution=20x4
-
-# path to font file to use
-FontFile=/usr/share/fonts/corefonts/courbd.ttf
-
-## these only apply if UseFT2=yes:
-
-# character encoding to use
-CharEncoding=iso8859-2
-
-# minimum size in pixels in which fonts should be rendered
-MinFontFaceSize=7x12
-
-## optional:
-Brightness=50 # Brightness (in %) if applicable
-Contrast=50 # Contrast (in %) if applicable
-Backlight=no # Backlight if applicable
-UpsideDown=no # flip image upside down
-Invert=no # invert light/dark pixels
-ShowDebugFrame=no # turns on/off 1 pixel thick debugging
- # border within the usable text area,
- # for setting up TextResolution and
- # MinFontFaceSize (if using FT2);
-ShowBigBorder=no # border around the unused area
-ShowThinBorder=yes # border around the unused area
-PixelShiftX=0
-PixelShiftY=2
-
-
-
-## Matrix Orbital GLK driver ##
-[glk]
-
-# select the serial device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# set the initial contrast value [default: 500; legal: 0 - 1000]
-Contrast=500
-
-# set the serial port speed [default: 19200; legal: 9600, 19200, 38400, 57600, 115200]
-Speed=19200
-
-
-
-## Hitachi HD44780 driver ##
-[hd44780]
-{%- if model == 'ezio' %}
-ConnectionType=ezio
-Device=/dev/ttyUSB0
-Keypad=yes
-Size=16x2
-KeyMatrix_4_1=Enter
-KeyMatrix_4_2=Up
-KeyMatrix_4_3=Down
-KeyMatrix_4_4=Escape
-{%- endif %}
-
-# Select what type of connection. See documentation for available types.
-#ConnectionType=4bit
-
-# Select model if have non-standard one which require extra initialization or handling or
-# just want extra features it offers.
-# Available: standard (default), extended, winstar_oled, pt6314_vfd
-# - standard is default, use for LCDs not mentioned below.
-# - extended, hd66712, ks0073: allows use 4-line "extended" mode,
-# same as deprecated now option ExtendedMode=yes
-# - winstar_oled, weh00xxyya: changes initialization for WINSTAR's WEH00xxyyA displays
-# and allows handling brightness
-# - pt6314_vfd: allows handling brightness on PTC's PT6314 VFDs
-#
-# This option should be independent of connection type.
-#Model = standard
-
-# I/O address of the LPT port. Usual values are: 0x278, 0x378 and 0x3BC.
-# For I2C connections this sets the slave address (usually 0x20).
-#Port=0x378
-
-# Device of the serial, I2C, or SPI interface [default: /dev/lcd]
-#Device=/dev/ttyS0
-
-# Bitrate of the serial port (0 for interface default)
-#Speed=0
-
-# If you have a keypad connected.
-# You may also need to configure the keypad layout further on in this file.
-#Keypad=no
-
-# Set the initial contrast (bwctusb, lcd2usb, and usb4all)
-# [default: 800; legal: 0 - 1000]
-#Contrast=0
-
-# Set brightness of the backlight (lcd2usb and usb4all):
-# Brightness is the brightness while the backlight is set to 'on'.
-# [default: 800; legal: 0 - 1000]
-#Brightness=1000
-
-# OffBrightness is the brightness while the backlight is set to 'off'.
-# [default: 300; legal: 0 - 1000]
-#OffBrightness=0
-
-# Specify if you have a switchable backlight and if yes, can select method for turning it on/off:
-#
-# - none - no switchable backlight is available. For compability also boolean
-# 0, n, no, off and false are aliases.
-# - external - use external pin or any other method defined with ConnectionType backlight
-# handling. For backward compability also this value is chosen for boolean
-# TRUE values: 1, y, yes, on and true.
-# - internal - means that backlight is handled using internal commands according
-# to selected display model (with Model option). Depending on model,
-# Brightness and OffBrightness options can be taken into account.
-# - internalCmds - means that commands for turning on and off backlight are given
-# with extra options BacklightOnCmd and BacklightOffCmd, which would be treated
-# as catch up (last resort) for other types of displays which have similar features.
-#
-# You can provide multiple occurences of this option to use more than one method.
-# Default is model specific: Winstar OLED and PT6314 VFD enables internal backlight mode,
-# for others it is set to none.
-#Backlight = none
-
-# Commands for enabling internal backlight for use with Backlight=internalCmds.
-# Up to 4 bytes can be encoded, as integer number in big-endian order.
-#
-# NOTE: this is advanced option, if command contains bits other than only brighness handling,
-# they must be set accordingly to not disrupt display state. If for example 'FUNCTION SET' command
-# is used for this purpose, bits of interface length (4-bit / 8-bit) must be set according to
-# selected ConnectionType.
-#BacklightCmdOn=0x1223
-
-# Commands for disabling internal backlight for use with Backlight=internalCmds.
-# Up to 4 bytes can be encoded, as integer number in big-endian order.
-#BacklightCmdOff=0x1234
-
-
-# If you have the additional output port ("bargraph") and you want to
-# be able to control it with the lcdproc OUTPUT command
-#OutputPort=no
-
-# Specifies if the last line is pixel addressable (yes) or it controls an
-# underline effect (no). [default: yes; legal: yes, no]
-#Lastline=yes
-
-# Specifies the size of the LCD.
-# In case of multiple combined displays, this should be the total size.
-#Size=20x4
-
-# For multiple combined displays: how many lines does each display have.
-# Vspan=2,2 means both displays have 2 lines.
-#vspan=2,2
-
-# If you have an HD66712, a KS0073 or another controller with 'extended mode',
-# set this flag to get into 4-line mode. On displays with just two lines, do
-# not set this flag.
-# As an additional restriction, controllers with and without extended mode
-# AND 4 lines cannot be mixed for those connection types that support more
-# than one display!
-# NOTE: This option is deprecated in favour of choosing Model=extended option.
-#ExtendedMode=yes
-
-# In extended mode, on some controllers like the ST7036 (in 3 line mode)
-# the next line in DDRAM won't start 0x20 higher. [default: 0x20]
-#LineAddress=0x10
-
-# Character map to to map ISO-8859-1 to the LCD's character set
-# [default: hd44780_default; legal: hd44780_default, hd44780_euro, ea_ks0073,
-# sed1278f_0b, hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314,
-# weh001602a_1]
-# (hd44780_koi8_r, hd44780_cp1251, hd44780_8859_5, upd16314 and weh001602a_1
-# are possible if compiled with additional charmaps)
-CharMap=hd44780_default
-
-# Font bank to be used for some displays such as the WINSTAR WEH001602A
-# 0: English/Japanese (default)
-# 1: Western Europe I
-# 2: English/Rusian
-# 3: Western Europe II
-#FontBank=0
-
-# If your display is slow and cannot keep up with the flow of data from
-# LCDd, garbage can appear on the LCDd. Set this delay factor to 2 or 4
-# to increase the delays. Default: 1.
-#DelayMult=2
-
-# Some displays (e.g. vdr-wakeup) need a message from the driver to that it
-# is still alive. When set to a value bigger then null the character in the
-# upper left corner is updated every <KeepAliveDisplay> seconds. Default: 0.
-#KeepAliveDisplay=0
-
-# If you experience occasional garbage on your display you can use this
-# option as workaround. If set to a value bigger than null it forces a
-# full screen refresh <RefreshDiplay> seconds. Default: 0.
-#RefreshDisplay=5
-
-# You can reduce the inserted delays by setting this to false.
-# On fast PCs it is possible your LCD does not respond correctly.
-# Default: true.
-#DelayBus=true
-
-# If you have a keypad you can assign keystrings to the keys.
-# See documentation for used terms and how to wire it.
-# For example to give directly connected key 4 the string "Enter", use:
-# KeyDirect_4=Enter
-# For matrix keys use the X and Y coordinates of the key:
-# KeyMatrix_1_3=Enter
-#KeyMatrix_4_1=Enter
-#KeyMatrix_4_2=Up
-#KeyMatrix_4_3=Down
-#KeyMatrix_4_4=Escape
-
-## ICP Peripheral Comminication Protocol driver ##
-# Supports A125 and A106
-#
-# Short Press Select: Down
-# Long Press Select: Up
-# Short Press Enter: Enter
-# Long Press Enter: Escape
-#
-[icp_a106]
-Device=/dev/ttyS1
-
-# Display dimensions
-Size=20x2
-
-
-## Code Mercenaries IO-Warrior driver ##
-[IOWarrior]
-
-# display dimensions
-Size=20x4
-
-# serial number. Must be exactly as listed by usbview
-# (if not given, the 1st IOWarrior found gets used)
-#SerialNumber=00000674
-
-# If you have an HD66712, a KS0073 or another 'almost HD44780-compatible',
-# set this flag to get into extended mode (4-line linear).
-#ExtendedMode=yes
-
-# Specifies if the last line is pixel addressable (yes) or it controls an
-# underline effect (no). [default: yes; legal: yes, no]
-#Lastline=yes
-
-
-
-## Soundgraph/Ahanix/Silverstone/Uneed/Accent iMON driver ##
-[imon]
-
-# select the device to use
-Device=/dev/lcd0
-
-# display dimensions
-Size=16x2
-
-# Character map to to map ISO-8859-1 to the displays character set.
-# [default: none; legal: none, hd44780_euro, upd16314, hd44780_koi8_r,
-# hd44780_cp1251, hd44780_8859_5 ] (upd16314, hd44780_koi8_r,
-# hd44780_cp1251, hd44780_8859_5 are possible if compiled with additional
-# charmaps)
-CharMap=hd44780_euro
-
-## Soundgraph iMON LCD ##
-[imonlcd]
-# Specify which iMon protocol should be used
-# [legal: 0, 1; default: 0]
-# Choose 0 for 15c2:ffdc device,
-# Choose 1 for 15c2:0038 device
-Protocol=0
-
-# Set the exit behavior [legal: 0-2; default: 1]
-# 0 means leave shutdown message,
-# 1 means show the big clock,
-# 2 means blank device
-#OnExit=2
-
-# Select the output device to use [default: /dev/lcd0]
-Device=/dev/lcd0
-
-# Select the displays contrast [default: 200; legal: 0-1000]
-Contrast=200
-
-# Specify the size of the display in pixels [default: 96x16]
-#Size=96x16
-
-# Set the backlight state [default: on; legal: on, off]
-#Backlight=on
-
-# Set the disc mode [legal: 0,1; default: 0]
-# 0 => spin the "slim" disc - two disc segments,
-# 1 => their complement spinning;
-#DiscMode=0
-
-
-
-## IrMan driver ##
-[IrMan]
-# in case of trouble with IrMan, try the Lirc emulator for IrMan
-
-# Select the input device to use
-#Device=/dev/irman
-
-# Select the configuration file to use
-#Config=/etc/irman.cfg
-
-
-
-## IRtrans driver ##
-[irtrans]
-
-# Does the device have a backlight? [default: no; legal: yes, no]
-#Backlight=no
-
-# IRTrans device to connect to [default: localhost]
-#Hostname=localhost
-
-# display dimensions
-Size=16x2
-
-
-
-## Joystick driver ##
-[joy]
-
-# Select the input device to use [default: /dev/js0]
-Device=/dev/js0
-
-# set the axis map
-Map_Axis1neg=Left
-Map_Axis1pos=Right
-Map_Axis2neg=Up
-Map_Axis2pos=Down
-
-# set the button map
-Map_Button1=Enter
-Map_Button2=Escape
-
-
-## JW-002 driver ##
-[jw002]
-
-# Select the output device to use [default: /dev/lcd]
-#Device=/dev/ttyS0
-
-# Set the display size [default: 24x8]
-Size=24x8
-
-# Optional X and Y offsets (in characters) to center a smaller display
-# size on the full 24x8 panel
-X_offset=0
-Y_offset=0
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# Pick which font page to use [default: 0]
-# Note that different fonts probably have their bargraph chars in different
-# spots. For ROM-based fonts 0-3, those characters are already known.
-Font=0
-
-# The following table translates from jw002 key letters to logical key names.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_I=Left
-#KeyMap_J=Right
-#KeyMap_H=Up
-#KeyMap_K=Down
-#KeyMap_L=Enter
-#KeyMap_A=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-## LB216 driver ##
-[lb216]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Set the communication speed [default: 9600; legal: 2400, 9600]
-Speed=9600
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## LCDM001 driver ##
-[lcdm001]
-
-Device=/dev/ttyS1
-
-# keypad settings
-# Keyname Function
-# Normal context Menu context
-# ------- -------------- ------------
-# PauseKey Pause/Continue Enter/select
-# BackKey Back(Go to previous screen) Up/Left
-# ForwardKey Forward(Go to next screen) Down/Right
-# MainMenuKey Open main menu Exit/Cancel
-PauseKey=LeftKey
-BackKey=UpKey
-ForwardKey=DownKey
-MainMenuKey=RightKey
-
-# You can rearrange the settings here.
-# If your device is broken, have a look at server/drivers/lcdm001.h
-
-
-
-## HNE LCTerm driver ##
-[lcterm]
-Device=/dev/ttyS1
-Size=16x2
-
-
-## Linux event device input driver ##
-[linux_input]
-
-# Select the input device to use [default: /dev/input/event0]. This may be
-# either an absolute path to the input node, starting with '/', or
-# an input device name, e.g. "Logitech Gaming Keyboard Gaming Keys".
-# Device=/dev/input/event0
-
-# specify a non-default key map
-#key=1,Escape
-#key=28,Enter
-#key=96,Enter
-#key=105,Left
-#key=106,Right
-#key=103,Up
-#key=108,Down
-
-
-## LIRC input driver ##
-[lirc]
-
-# Specify an alternative location of the lircrc file [default: ~/.lircrc]
-#lircrc=/etc/lircrc.lcdproc
-
-# Must be the same as in your lircrc
-#prog=lcdd
-
-
-
-## LIS MCE 2005 driver ##
-[lis]
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# 0-250 = 25%, 251-500 = 50%, 501-750 = 75%, 751-1000 = 100%
-#Brightness=1000
-
-# Columns by lines [default: 20x2]
-#Size=20x2
-
-# USB Vendor ID [default: 0x0403]
-# Change only if testing a compatible device.
-#VendorID=0x0403
-
-# USB Product ID [default: 0x6001]
-# Change only if testing a compatible device.
-#ProductID=0x6001
-
-# Specifies if the last line is pixel addressable (yes) or it only controls an
-# underline effect (no). [default: yes; legal: yes, no]
-#Lastline=yes
-
-
-
-##The driver for the VFD of the Medion MD8800 PC ##
-[MD8800]
-# device to use [default: /dev/ttyS1]
-#Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-
-
-
-## Futuba MDM166A Display
-[mdm166a]
-# Show self-running clock after LCDd shutdown
-# Possible values: [default: no; legal: no, small, big]
-Clock=big
-# Dim display, no dimming gives full brightness [default: no, legal: yes, no]
-Dimming=no
-# Dim display in case LCDd is inactive [default: no, legal: yes, no]
-OffDimming=yes
-
-
-
-## MSI MS-6931 driver for displays in 1HU servers ##
-[ms6931]
-
-# device to use [default: /dev/ttyS1]
-Device=/dev/ttyS1
-
-# display size [default: 16x2]
-#Size=16x2
-
-
-
-## MTC-S16209x driver ##
-[mtc_s16209x]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the initial brightness [default: 255; legal: 0 - 255]
-Brightness=255
-
-# Reinitialize the LCD's BIOS [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Matrix Orbital driver ##
-[MtxOrb]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/ttyS0
-
-# Set the display size [default: 20x4]
-Size=20x4
-
-# Set the display type [default: lcd; legal: lcd, lkd, vfd, vkd]
-Type=lkd
-
-# Set the initial contrast [default: 480]
-# NOTE: The driver will ignore this if the display
-# is a vfd or vkd as they don't have this feature
-Contrast=480
-
-# Some old displays do not have an adjustable backlight but only can
-# switch the backlight on/off. If you experience randomly appearing block
-# characters, try setting this to false. [default: yes; legal: yes, no]
-hasAdjustableBacklight=no
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=0
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200]
-Speed=19200
-
-# The following table translates from MtxOrb key letters to logical key names.
-# By default no keys are mapped, meaning the keypad is not used at all.
-#KeyMap_A=Left
-#KeyMap_B=Right
-#KeyMap_C=Up
-#KeyMap_D=Down
-#KeyMap_E=Enter
-#KeyMap_F=Escape
-# See the [menu] section for an explanation of the key mappings
-
-# You can find out which key of your display sends which
-# character by setting keypad_test_mode to yes and running
-# LCDd. LCDd will output all characters it receives.
-# Afterwards you can modify the settings above and set
-# keypad_set_mode to no again.
-keypad_test_mode=no
-
-
-
-## mx5000 driver for LCD display on the Logitech MX5000 keyboard ##
-[mx5000]
-
-# Select the output device to use [default: /dev/hiddev0]
-Device = /dev/hiddev0
-# Time to wait in ms after the refresh screen has been sent [default: 1000]
-WaitAfterRefresh = 1000
-
-
-
-## Noritake VFD driver ##
-[NoritakeVFD]
-# device where the VFD is. Usual values are /dev/ttyS0 and /dev/ttyS1
-# [default: /dev/lcd]
-Device=/dev/ttyS0
-# Specifies the size of the LCD.
-Size=20x4
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=50
-# set the serial port speed [default: 9600, legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-# Set serial data parity [default: 0; legal: 0-2 ]
-# Meaning: 0(=none), 1(=odd), 2(=even)
-Parity=0
-# re-initialize the VFD [default: no; legal: yes, no]
-Reboot=no
-
-
-
-## Olimex MOD-LCD1x9 driver ##
-[Olimex_MOD_LCD1x9]
-
-# device file of the i2c controler
-Device=/dev/i2c-0
-
-
-## Mini-box.com picoLCD (usblcd) driver ##
-[picolcd]
-
-# KeyTimeout is only used if the picoLCD driver is built with libusb-0.1. When
-# built with libusb-1.0 key and IR data is input asynchronously so there is no
-# need to wait for the USB data.
-# KeyTimeout is the time in ms that LCDd spends waiting for a key press before
-# cycling through other duties. Higher values make LCDd use less CPU time and
-# make key presses more detectable. Lower values make LCDd more responsive
-# but a little prone to missing key presses. 500 (.5 second) is the default
-# and a balanced value. [default: 500; legal: 0 - 1000]
-KeyTimeout=500
-
-# Key auto repeat is only available if the picoLCD driver is built with
-# libusb-1.0. Use KeyRepeatDelay and KeyRepeatInterval to configure key auto
-# repeat.
-#
-# Key auto repeat delay (time in ms from first key report to first repeat). Use
-# zero to disable auto repeat. [default: 300; legal: 0 - 3000]
-KeyRepeatDelay=300
-
-# Key auto repeat interval (time in ms between repeat reports). Only used if
-# KeyRepeatDelay is not zero. [default: 200; legal: 0 - 3000]
-KeyRepeatInterval=200
-
-# Sets the initial state of the backlight upon start-up.
-# [default: on; legal: on, off]
-#Backlight=on
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]. Works only
-# with the 20x4 device
-Brightness=1000
-
-# Set the brightness while the backlight is 'off' [default: 0; legal: 0 - 1000].
-# Works only with the 20x4 device.
-#OffBrightness=0
-
-# Set the initial contrast [default: 1000; legal: 0 - 1000]
-Contrast=1000
-
-# Link the key lights to the backlight? [default: on; legal: on, off]
-#LinkLights=off
-
-# Light the keys? [default: on; legal: on, off]
-Keylights=on
-
-# If Keylights is on, the you can unlight specific keys below:
-# Key0 is the directional pad. Key1 - Key5 correspond to the F1 - F5 keys.
-# There is no LED for the +/- keys. This is a handy way to indicate to users
-# which keys are disabled. [default: on; legal: on, off]
-Key0Light=on
-Key1Light=on
-Key2Light=on
-Key3Light=on
-Key4Light=on
-Key5Light=on
-
-# Host name or IP address of the LIRC instance that is to receive IR codes
-# If not set, or set to an empty value, IR support is disabled.
-#LircHost=127.0.0.1
-
-# UDP port on which LIRC is listening [default: 8765; legal: 1 - 65535]
-LircPort=8765
-
-# UDP data time unit for LIRC [default: off; legal: on, off]
-# On: times sent in microseconds (requires LIRC UDP driver that accepts this).
-# Off: times sent in 'jiffies' (1/16384s) (supported by standard LIRC UDP driver).
-LircTime_us=on
-
-# Threshold in microseconds of the gap that triggers flushing the IR data
-# to lirc [default: 8000; legal: 1000 - ]
-# If LircTime_us is on values greater than 32.767ms will disable the flush
-# If LircTime_us is off values greater than 1.999938s will disable the flush
-LircFlushThreshold=10000
-
-
-
-## Pyramid LCD driver ##
-[pyramid]
-
-# device to connect to [default: /dev/lcd]
-Device=/dev/ttyUSB0
-
-
-
-## rawserial driver ##
-[rawserial]
-
-# Select the output device to use [default: /dev/cuaU0]
-Device=/dev/ttyS0
-
-# Serial port baudrate [default: 9600]
-Speed=9600
-
-# Specifies the size of the LCD. If this driver is loaded as a secondary driver
-# it always adopts to the size of the primary driver. If loaded as the only
-# (or primary) driver, the size can be set. [default: 40x4]
-#Size=16x2
-
-# How often to dump the LCD contents out the port, in Hertz (times per second)
-# 1 = once per second, 4 is 4 times per second, 0.1 is once every 10 seconds.
-# [default: 1; legal: 0.0005 - 10]
-UpdateRate=1
-
-
-
-## SDEC driver for Watchguard Firebox ##
-[sdeclcd]
-# No options
-
-
-## Seiko Epson 1330 driver ##
-[sed1330]
-
-# Port where the LPT is. Common values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Type of LCD module (legal: G321D, G121C, G242C, G191D, G2446, SP14Q002)
-# Note: Currently only tested with G321D & SP14Q002.
-Type=G321D
-
-# Width x Height of a character cell in pixels [legal: 6x7 - 8x16; default: 6x10]
-CellSize=6x10
-
-# Select what type of connection [legal: classic, bitshaker; default: classic]
-ConnectionType=classic
-
-
-
-## Seiko Epson 1520 driver ##
-[sed1520]
-
-# Port where the LPT is. Usual values are 0x278, 0x378 and 0x3BC
-Port=0x378
-
-# Select the interface type (wiring) for the display. Supported values are
-# 68 for 68-style connection (RESET level high) and 80 for 80-style connection
-# (RESET level low). [legal: 68, 80; default: 80]
-InterfaceType=80
-
-# On fast machines it may be necessary to slow down transfer to the display.
-# If this value is set to zero, delay is disabled. Any value greater than
-# zero slows down each write by one microsecond. [legal: 0-1000; default: 1]
-DelayMult=0
-
-# The original wiring used an inverter to drive the control lines. If you do
-# not use an inverter set haveInverter to no. [default: yes; legal: yes, no]
-HaveInverter=no
-
-# On some displays column data in memory is mapped to segment lines from right
-# to left. This is called inverted mapping (not to be confused with
-# 'haveInverter' from above). [default: no; legal: yes, no]
-#InvertedMapping=yes
-
-# At least one display is reported (Everbouquet MG1203D) that requires sending
-# three times 0xFF before a reset during initialization.
-# [default: no; legal: yes, no]
-#UseHardReset=yes
-
-
-## serial POS display driver ##
-[serialPOS]
-
-# Device to use in serial mode [default: /dev/ttyS0]
-Device=/dev/ttyS0
-
-# Specifies the size of the display in characters. [default: 16x2]
-Size=16x2
-
-# Specifies the cell size of each character cell on the display in characters.
-# [default: 5x8]
-Cellsize=5x8
-
-# Specifies the number of custom characters supported by the display.
-# [default: 0]
-Custom_chars=0
-
-# Set the communication protocol to use with the POS display.
-# [default: AEDEX; legal: AEDEX, CD5220, Epson, Emax, LogicControls, Ultimate]
-Type=AEDEX
-
-# communication baud rate with the display [default: 9600; legal: 1200, 2400,
-# 4800, 9600, 19200, 115200]
-Speed=9600
-
-
-
-## Serial VFD driver ##
-## Drives various (see below) serial 5x7dot VFD's. ##
-[serialVFD]
-
-# Specifies the displaytype.[default: 0]
-# 0 NEC (FIPC8367 based) VFDs.
-# 1 KD Rev 2.1.
-# 2 Noritake VFDs (*).
-# 3 Futaba VFDs
-# 4 IEE S03601-95B
-# 5 IEE S03601-96-080 (*)
-# 6 Futaba NA202SD08FA (allmost IEE compatible)
-# 7 Samsung 20S207DA4 and 20S207DA6
-# 8 Nixdorf BA6x / VT100
-# (* most should work, not tested yet.)
-Type=0
-
-# "no" if display connected serial, "yes" if connected parallel. [default: no]
-# I.e. serial by default
-use_parallel=no
-
-# Number of Custom-Characters. default is display type dependent
-#Custom-Characters=0
-
-# Portaddress where the LPT is. Used in parallel mode only. Usual values are
-# 0x278, 0x378 and 0x3BC.
-Port=0x378
-
-# Set parallel port timing delay (us). Used in parallel mode only.
-# [default: 2; legal: 0 - 255]
-#PortWait=2
-
-# Device to use in serial mode. Usual values are /dev/ttyS0 and /dev/ttyS1
-Device=/dev/ttyS1
-
-# Specifies the size of the VFD.
-Size=20x2
-
-# Set the initial brightness [default: 1000; legal: 0 - 1000]
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-Brightness=1000
-# Set the initial off-brightness [default: 0; legal: 0 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-# (4 steps 0-250, 251-500, 501-750, 751-1000)
-OffBrightness=0
-
-# set the serial port speed [default: 9600; legal: 1200, 2400, 9600, 19200, 115200]
-Speed=9600
-
-# enable ISO 8859 1 compatibility [default: yes; legal: yes, no]
-#ISO_8859_1=yes
-
-
-
-## shuttleVFD driver ##
-[shuttleVFD]
-# No options
-
-
-
-## stv5730 driver ##
-[stv5730]
-
-# Port the device is connected to [default: 0x378]
-Port=0x378
-
-
-[SureElec]
-
-# Port the device is connected to (by default first USB serial port)
-Device=/dev/ttyUSB0
-
-# Edition level of the device (can be 1, 2 or 3) [default: 2]
-#Edition=1
-
-# set display size
-# Note: The size can be obtained directly from device for edition 2 & 3.
-#Size=16x2
-
-# Set the initial contrast [default: 480; legal: 0 - 1000]
-#Contrast=200
-
-# Set the initial brightness [default: 480; legal: 1 - 1000]
-#Brightness=480
-
-# Set the initial off-brightness [default: 100; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-#OffBrightness=100
-
-
-## SVGAlib driver ##
-[svga]
-
-# svgalib mode to use [default: G320x240x256 ]
-# legal values are supported svgalib modes
-#Mode=G640x480x256
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Set the initial contrast [default: 500; legal: 0 - 1000]
-# Can be set but does not change anything internally
-Contrast=500
-
-# Set the initial brightness [default: 1000; legal: 1 - 1000]
-Brightness=1000
-
-# Set the initial off-brightness [default: 500; legal: 1 - 1000]
-# This value is used when the display is normally
-# switched off in case LCDd is inactive
-OffBrightness=500
-
-
-
-## Text driver ##
-[text]
-# Set the display size [default: 20x4]
-Size=20x4
-
-
-
-## Toshiba T6963 driver ##
-[t6963]
-
-# set display size in pixels [default: 128x64]
-Size=128x64
-
-# port to use [default: 0x378; legal: 0x200 - 0x400]
-Port=0x378
-
-# Use LPT port in bi-directional mode. This should work on most LPT port and
-# is required for proper timing! [default: yes; legal: yes, no]
-#bidirectional=yes
-
-# Insert additional delays into reads / writes. [default: no; legal: yes, no]
-#delayBus=no
-
-# Clear graphic memory on start-up. [default: no; legal: yes, no]
-#ClearGraphic=no
-
-
-
-## Tyan Barebones LCD driver (GS10 & GS12 series) ##
-[tyan]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 9600; legal: 4800, 9600]
-Speed=9600
-
-# set display size [default: 16x2]
-Size=16x2
-
-
-
-## ELV ula200 driver ##
-[ula200]
-
-# Select the LCD size [default: 20x4]
-Size=20x4
-
-# If you have a non standard keypad you can associate any keystrings to keys.
-# There are 6 input key in the CwLnx hardware that generate characters
-# from 'A' to 'F'.
-#
-# The following it the built-in default mapping hardcoded in the driver.
-# You can leave those unchanged if you have a standard keypad.
-# You can change it if you want to report other keystrings or have a non
-# standard keypad.
-# KeyMap_A=Up
-# KeyMap_B=Down
-# KeyMap_C=Left
-# KeyMap_D=Right
-# KeyMap_E=Enter
-# KeyMap_F=Escape
-
-
-
-## Wirz SLI LCD driver ##
-[sli]
-
-# Select the output device to use [default: /dev/lcd]
-Device=/dev/lcd
-
-# Set the communication speed [default: 19200; legal: 1200, 2400, 9600, 19200,
-# 38400, 57600, 115200]
-Speed=19200
-
-
-
-## vlsys_m428 for VFD/IR combination in Moneual MonCaso 320 ##
-[vlsys_m428]
-
-# Select the output device to use [default: /dev/ttyUSB0]
-#Device=/dev/ttyUSB0
-
-
-
-## OnScreen Display using libxosd ##
-[xosd]
-
-# set display size [default: 20x4]
-Size=20x4
-
-# Offset in pixels from the top-left corner of the monitor [default: 0x0]
-Offset=200x200
-
-# X font to use, in XLFD format, as given by "xfontsel"
-Font=-*-terminus-*-r-*-*-*-320-*-*-*-*-*
-
-## Y.A.R.D.2 LCD section
-[yard2LCD]
-Size=20x4
-# If rendering rate is too high, change in server\main.h #define RENDER_FREQ 8 to "1"
-
-# EOF
diff --git a/data/templates/system-display/lcdproc.conf.tmpl b/data/templates/system-display/lcdproc.conf.tmpl
deleted file mode 100644
index 92aee8efe..000000000
--- a/data/templates/system-display/lcdproc.conf.tmpl
+++ /dev/null
@@ -1,173 +0,0 @@
-### autogenerated by system-display.py ###
-
-# system display show host (CPU|SMP-CPU|CPU-Graph|Load|Memory|Proc-Size|Disk|Uptime)
-# network interface <intName> alias <alias>
-# units (bps|Bps|pps)
-# clock (big|mini|date-time)
-
-# LCDproc client configuration file
-
-## general options ##
-[lcdproc]
-# address of the LCDd server to connect to
-Server=127.0.0.1
-
-# Port of the server to connect to
-Port=13666
-
-# set reporting level
-#ReportLevel=2
-
-# report to to syslog ?
-ReportToSyslog=true
-
-# run in foreground [default: false; legal: true, false]
-#Foreground=true
-
-# PidFile location when running as daemon [default: /var/run/lcdproc.pid]
-#PidFile=/var/run/lcdproc.pid
-
-# slow down initial announcement of modes (in 1/100s)
-#delay=2
-
-
-## screen specific configuration options ##
-{%- if show %}
-# display name for the main menu [default: LCDproc HOST]
-DisplayName="{%- if show['title'] %}{{ show['title'] }}{%- else %}VyOS{%- endif %}"
-
-{%- if show['host'] %}
-
-[CPU]
-# Show screen
-Active={%- if 'cpu' in show['host'] %}true{%- else %}false{%- endif %}
-OnTime=1
-OffTime=2
-ShowInvisible=false
-
-[SMP-CPU]
-# Show screen
-Active={%- if 'cpu-all' in show['host'] %}true{%- else %}false{%- endif %}
-
-[Memory]
-# Show screen
-Active={%- if 'memory' in show['host'] %}true{%- else %}false{%- endif %}
-
-[Load]
-# Show screen
-Active={%- if 'load-hist' in show['host'] %}true{%- else %}false{%- endif %}
-# Min Load Avg at which the backlight will be turned off [default: 0.05]
-LowLoad=0.05
-# Max Load Avg at which the backlight will start blinking [default: 1.3]
-HighLoad=1.3
-
-[Uptime]
-# Show screen
-Active={%- if 'uptime' in show['host'] %}true{%- else %}false{%- endif %}
-
-[CPUGraph]
-# Show screen
-Active={%- if 'cpu-hist' in show['host'] %}true{%- else %}false{%- endif %}
-
-[ProcSize]
-# Show screen
-Active={%- if 'proc' in show['host'] %}true{%- else %}false{%- endif %}
-
-[Disk]
-# Show screen
-Active={%- if 'disk' in show['host'] %}true{%- else %}false{%- endif %}
-{%- else %} {# if show['host'] #}
-{# Turn off sections that default active #}
-
-[CPU]
-Active=false
-
-[Memory]
-Active=false
-
-[Load]
-Active=false
-
-{%- endif %} {# if show['host'] #}
-
-[TimeDate]
-# Show screen
-Active={%- if show['clock'] == 'date-time' %}true{%- else %}false{%- endif %}
-# time format [default: %H:%M:%S; legal: see strftime(3)]
-TimeFormat="%H:%M:%S"
-# date format [default: %x; legal: see strftime(3)]
-DateFormat="%x"
-
-[BigClock]
-# Show screen
-Active={%- if show['clock'] == 'big' %}true{%- else %}false{%- endif %}
-
-[MiniClock]
-# Show screen
-Active={%- if show['clock'] == 'mini' %}true{%- else %}false{%- endif %}
-# time format [default: %H:%M; legal: see strftime(3)]
-TimeFormat="%H:%M"
-
-{%- if show['network'] %}
-[Iface]
-# Show screen
-Active={%- if show['network']['interface'] %}true{%- else %}false{%- endif %}
-{%- for i in show['network']['interface'] %}
-# Show stats for Interface {{ i }}
-Interface{{ loop.index0 }}={{ i }}
-{%- if show['network']['interface'][i]['alias'] %}
-# Interface alias name to display [default: <interface name>]
-Alias{{ loop.index0 }}={{ show['network']['interface'][i]['alias'] }}
-{%- endif %}
-{%- endfor %}
-
-# Units to display [default: byte; legal: byte, bit, packet]
-{%- if show['network']['units'] == 'bps' %}
-unit=bit
-{%- elif show['network']['units'] == 'Bps'%}
-unit=byte
-{%- elif show['network']['units'] == 'pps' %}
-unit=packet
-{%- else %}
-unit=bit
-{%- endif %}
-# add screen with transferred traffic
-#transfer=TRUE
-{%- endif %} {# if show['network'] #}
-
-{%- else %}{# if show #}
-{# Turn off sections that default active #}
-
-[CPU]
-Active=false
-
-[Memory]
-Active=false
-
-[Load]
-Active=false
-
-[TimeDate]
-Active=false
-{%- endif %}{# if show #}
-
-[Battery]
-# Show screen
-Active=false
-
-[About]
-# Show screen
-Active=false
-
-[OldTime]
-# Show screen
-Active=false
-# time format [default: %H:%M:%S; legal: see strftime(3)]
-TimeFormat="%H:%M:%S"
-# date format [default: %x; legal: see strftime(3)]
-DateFormat="%x"
-# Display the title bar in two-line mode. Note that with four lines or more
-# the title is always shown. [default: true; legal: true, false]
-#ShowTitle=false
-
-# EOF