Age | Commit message (Collapse) | Author |
|
set `default-route-distance` to 1
|
|
When all the underlay links go down the PE no longer has access to the VxLAN
+overlay.
To prevent blackholing of traffic the server/ES links are protodowned on the PE.
A link can be setup for uplink tracking via the following configuration:
set interfaces ethernet eth0 evpn uplink
|
|
Add abiilty to change `base_reachable_time_ms` option
/proc/sys/net/ipv6/neigh/{ifname}/base_reachable_time_ms
|
|
In order to lower the Ethernet default MTU we need to drop the common
defaultValue from the XML mtu-68-16000.xml.i building block. Per interface
default MTU is later overloaded by XML.
|
|
|
|
Linux bridge uses EtherType 0x8100 by default. In some scenarios, an EtherType
value of 0x88A8 is required.
Reusing CLI command from VIF-S (QinQ) interfaces:
set interfaces bridge br0 protocol 802.1ad
|
|
The DUID regex was missing a lower bound, which could cause it not to
match when it should.
We have to specify the lower bound explicitly as 0 to keep the regex
behavior similar to that in Python (in Python, omitting the lower bound
is equivalent to specifying 0).
|
|
|
|
Refactor DUID XML definition in conf-mode to be reusable. Additionally, remove
explicit call to a separate validator `ipv6-duid` and inline the regex into the
XML definition.
|
|
Example:
set interfaces ethernet eth0 dhcp-options user-class VyOS
or
set interfaces ethernet eth0 dhcp-options user-class 56:79:4f:53
|
|
The string data type specifies either an NVT ASCII string enclosed in double
quotes, or a series of octets specified in hexadecimal, separated by colons.
For example:
set interfaces ethernet eth0 dhcp-options client-id CLIENT-FOO
or
set interfaces ethernet eth0 dhcp-options client-id 43:4c:49:45:54:2d:46:4f:4f
As of now there was no input validation performed.
|
|
|
|
|
|
wifi: T5491: allow white-/blacklisting station MAC addresses for security
|
|
T5447: Initial support for MACsec static keys
|
|
|
|
Station MAC address-based authentication means:
* 'allow' accept all clients except the one on the deny list
* 'deny' accept only clients listed on the accept list
New CLI commands:
* set interfaces wireless wlan0 security station-address mode <accept|deny>
* set interfaces wireless wlan0 security station-address accept mac <mac>
* set interfaces wireless wlan0 security station-address deny mac <mac>
|
|
wireguard: T5409: Added 'set interfaces wireguard wgX threaded'
|
|
Using threaded as CLI node is a very deep term used by kernel threads. To make
this more understandable to users, rename the node to per-client-thread.
It's also not necessary to test if any one peer is configured and probing if
the option is set. There is a base test which requires at least one peer
to be configured.
|
|
setting
|
|
This is only a cosmetic change so that the default value is properly retrieved
from the defaultValue XML node.
|
|
When no-release is specified, dhcp6c client will not release allocated address or prefix on client exit.
vyos.ifconfig: dhcpv6: T5387: re-use options_file for no release flag [WIP]
* Todo: render Jinja2 template and fill it
vyos.ifconfig: dhcpv6: T5387: finish options_file and no release flag in cli
vyos.ifconfig: dhcpv6: T5387: fix missing/wrong end tag
vyos.ifconfig: dhcpv6: T5387: fix options, no var for -n
dhcpv6-client: T5387: fix missing / from filepaths
|
|
|
|
... this is a step towards a new and better implementation that will utilize
VPP.
|
|
|
|
Make host-name constraints consistent across all definitions
|
|
|
|
Container registry CLI node changed from leafNode to tagNode with the same
defaults. In addition we can now configure an authentication option per
registry.
|
|
|
|
|
|
This fixes a regressin introduced in commit e22e9c9210cb5 ("wwan: T3622: add
constraint for username/password CLI nodes").
|
|
sstp-client
|
|
- Username is up to 128 alphanumerical characters, -, _, #, and @
- Password is limited to ASCII characters only, with a total lenght of 128
|
|
No need to have two distinct include blocks as one superseeds the other. Also
this makes the entire behavior of "description" CLI node simpler.
|
|
|
|
|
|
|
|
<name> interface <ifname>`
* Include refactor to policy route to allow for deletion of mangle table instead of complex cleanup
* T4605: Rename mangle table to vyos_mangle
|
|
This commit raises the minimum TCP MSS clamping range to the MSS value
corresponding to the minimum packet size that must be accepted for IPv4.
|
|
firewall node
* Refactor firewall and zone-policy rule creation and cleanup
* Migrate interface firewall values to `firewall interfaces <name> <direction> name/ipv6-name <name>`
* Remove `firewall-interface.py` conf script
|
|
Ability to get MTU from DHCP-server and don't touch it per
any interface change if interface 'dhcp-options mtu' is
configured
|
|
Directed broadcast is described in rfc1812#section-5.3.5.2 and rfc2644.
By default Linux kernel doesn't forward directed broadcast
packets unless both of `/proc/sys/net/ipv4/conf/all/bc_forwarding`
and `/proc/sys/net/ipv4/conf/$iface/bc_forwarding` are set to 1.
|
|
|
|
The sla-id parameter of DHCPv6 prefix delegations is limited to 128. While this
is enough to use all /64 subnets of a /57 prefix, with a /56 prefix that is no
longer sufficient.
Increased sla-id length tp 64535 so one could delegate an entire /48.
|
|
|
|
|
|
set interfaces vxlan vxlan0 parameters ip df <set|unset|inherit>
set interfaces geneve gnv0 parameters ip df <set|unset|inherit>
|
|
|
|
"set traffic-policy" now becomes "set qos policy"
"set interface ethernet eth0 traffic-policy" now bvecomes "set qos interface eth0"
|
|
|