switch to devel

9 files changed, 1339 insertions, 248 deletions

diff --git a/plugins/modules/vyos_interface.py b/plugins/modules/_vyos_interface.py
index e7af0c1..eea8ef9 100644
--- a/plugins/modules/vyos_interface.py
+++ b/plugins/modules/_vyos_interface.py
@@ -20,7 +20,7 @@
 #
 
 ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
+                    'status': ['deprecated'],
                     'supported_by': 'network'}
 
 
@@ -33,6 +33,10 @@ short_description: Manage Interface on VyOS network devices
 description:
   - This module provides declarative management of Interfaces
     on VyOS network devices.
+deprecated:
+  removed_in: '2.13'
+  alternative: vyos_interfaces
+  why: Updated modules released with more functionality.
 notes:
   - Tested against VYOS 1.1.7
 options:
@@ -227,7 +231,7 @@ def map_obj_to_commands(updates):
 
 
 def map_config_to_obj(module):
-    data = get_config(module)
+    data = get_config(module, flags=['| grep interface'])
     obj = []
     for line in data.split('\n'):
         if line.startswith('set interfaces ethernet'):
diff --git a/plugins/modules/vyos_l3_interface.py b/plugins/modules/_vyos_l3_interface.py
index 98fbb4b..8f22d4a 100644
--- a/plugins/modules/vyos_l3_interface.py
+++ b/plugins/modules/_vyos_l3_interface.py
@@ -20,7 +20,7 @@
 #
 
 ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
+                    'status': ['deprecated'],
                     'supported_by': 'network'}
 
 
@@ -33,6 +33,10 @@ short_description: Manage L3 interfaces on VyOS network devices
 description:
   - This module provides declarative management of L3 interfaces
     on VyOS network devices.
+deprecated:
+  removed_in: '2.13'
+  alternative: vyos_l3_interfaces
+  why: Updated modules released with more functionality.
 notes:
   - Tested against VYOS 1.1.7
 options:
diff --git a/plugins/modules/vyos_command.py b/plugins/modules/vyos_command.py
index 16487e3..ac79224 100644
--- a/plugins/modules/vyos_command.py
+++ b/plugins/modules/vyos_command.py
@@ -25,7 +25,7 @@ DOCUMENTATION = """
 ---
 module: vyos_command
 version_added: "2.2"
-author: "Nathaniel Case (@qalthos)"
+author: "Nathaniel Case (@Qalthos)"
 short_description: Run one or more commands on VyOS devices
 description:
   - The command module allows running one or more commands on remote
diff --git a/plugins/modules/vyos_config.py b/plugins/modules/vyos_config.py
index 6ed07fc..14aea79 100644
--- a/plugins/modules/vyos_config.py
+++ b/plugins/modules/vyos_config.py
@@ -25,7 +25,7 @@ DOCUMENTATION = """
 ---
 module: vyos_config
 version_added: "2.2"
-author: "Nathaniel Case (@qalthos)"
+author: "Nathaniel Case (@Qalthos)"
 short_description: Manage VyOS configuration on remote device
 description:
   - This module provides configuration file management of VyOS
diff --git a/plugins/modules/vyos_facts.py b/plugins/modules/vyos_facts.py
index c480969..e4bf669 100644
--- a/plugins/modules/vyos_facts.py
+++ b/plugins/modules/vyos_facts.py
@@ -1,65 +1,90 @@
 #!/usr/bin/python
-#
-# This file is part of Ansible
-#
-# Ansible is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# Ansible is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with Ansible.  If not, see <http://www.gnu.org/licenses/>.
-#
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+
+# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+"""
+The module file for vyos_facts
+"""
+
+
 ANSIBLE_METADATA = {'metadata_version': '1.1',
-                    'status': ['preview'],
+                    'status': [u'preview'],
                     'supported_by': 'network'}
 
 
 DOCUMENTATION = """
 ---
 module: vyos_facts
-version_added: "2.2"
-author: "Nathaniel Case (@qalthos)"
-short_description: Collect facts from remote devices running VyOS
+version_added: 2.2
+short_description: Get facts about vyos devices.
 description:
-  - Collects a base set of device facts from a remote device that
-    is running VyOS.  This module prepends all of the
-    base network fact keys with U(ansible_net_<fact>).  The facts
-    module will always collect a base set of facts from the device
-    and can enable or disable collection of additional facts.
+  - Collects facts from network devices running the vyos operating
+    system. This module places the facts gathered in the fact tree keyed by the
+    respective resource name.  The facts module will always collect a
+    base set of facts from the device and can enable or disable
+    collection of additional facts.
+author:
+  - Nathaniel Case (@qalthos)
+  - Nilashish Chakraborty (@Nilashishc)
 extends_documentation_fragment: vyos
 notes:
-  - Tested against VYOS 1.1.7
+  - Tested against VyOS 1.1.8
 options:
   gather_subset:
     description:
       - When supplied, this argument will restrict the facts collected
         to a given subset.  Possible values for this argument include
-        all, default, config, and neighbors.  Can specify a list of
-        values to include a larger subset.  Values can also be used
+        all, default, config, and neighbors. Can specify a list of
+        values to include a larger subset. Values can also be used
         with an initial C(M(!)) to specify that a specific subset should
         not be collected.
     required: false
     default: "!config"
+  gather_network_resources:
+    description:
+      - When supplied, this argument will restrict the facts collected
+        to a given subset. Possible values for this argument include
+        all and the resources like interfaces.
+        Can specify a list of values to include a larger subset. Values
+        can also be used with an initial C(M(!)) to specify that a
+        specific subset should not be collected.
+    required: false
+    version_added: "2.9"
+    choices: ['all', 'interfaces', '!interfaces', 'l3_interfaces', '!l3_interfaces']
 """
 
 EXAMPLES = """
-- name: collect all facts from the device
-  vyos_facts:
+# Gather all facts
+- vyos_facts:
     gather_subset: all
+    gather_network_resources: all
 
-- name: collect only the config and default facts
-  vyos_facts:
+# collect only the config and default facts
+- vyos_facts:
     gather_subset: config
 
-- name: collect everything exception the config
-  vyos_facts:
+# collect everything exception the config
+- vyos_facts:
     gather_subset: "!config"
+
+# Collect only the interfaces facts
+- vyos_facts:
+    gather_subset:
+      - '!all'
+      - '!min'
+    gather_network_resources:
+      - interfaces
+
+# Do not collect interfaces facts
+- vyos_facts:
+    gather_network_resources:
+      - "!interfaces"
+
+# Collect interfaces and minimal default facts
+- vyos_facts:
+    gather_subset: min
+    gather_network_resources: interfaces
 """
 
 RETURN = """
@@ -103,228 +128,38 @@ ansible_net_python_version:
   description: The Python version Ansible controller is using
   returned: always
   type: str
+ansible_net_gather_network_resources:
+  description: The list of fact resource subsets collected from the device
+  returned: always
+  type: list
 """
 
-import platform
-import re
-
 from ansible.module_utils.basic import AnsibleModule
-from ansible.module_utils.six import iteritems
-from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import run_commands, get_capabilities
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.facts.facts import FactsArgs
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.facts.facts import Facts
 from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.vyos import vyos_argument_spec
 
 
-class FactsBase(object):
-
-    COMMANDS = frozenset()
-
-    def __init__(self, module):
-        self.module = module
-        self.facts = dict()
-        self.responses = None
-
-    def populate(self):
-        self.responses = run_commands(self.module, list(self.COMMANDS))
-
-
-class Default(FactsBase):
-
-    COMMANDS = [
-        'show version',
-    ]
-
-    def populate(self):
-        super(Default, self).populate()
-        data = self.responses[0]
-        self.facts['serialnum'] = self.parse_serialnum(data)
-        self.facts.update(self.platform_facts())
-
-    def parse_serialnum(self, data):
-        match = re.search(r'HW S/N:\s+(\S+)', data)
-        if match:
-            return match.group(1)
-
-    def platform_facts(self):
-        platform_facts = {}
-
-        resp = get_capabilities(self.module)
-        device_info = resp['device_info']
-
-        platform_facts['system'] = device_info['network_os']
-
-        for item in ('model', 'image', 'version', 'platform', 'hostname'):
-            val = device_info.get('network_os_%s' % item)
-            if val:
-                platform_facts[item] = val
-
-        platform_facts['api'] = resp['network_api']
-        platform_facts['python_version'] = platform.python_version()
-
-        return platform_facts
-
-
-class Config(FactsBase):
-
-    COMMANDS = [
-        'show configuration commands',
-        'show system commit',
-    ]
-
-    def populate(self):
-        super(Config, self).populate()
-
-        self.facts['config'] = self.responses
-
-        commits = self.responses[1]
-        entries = list()
-        entry = None
-
-        for line in commits.split('\n'):
-            match = re.match(r'(\d+)\s+(.+)by(.+)via(.+)', line)
-            if match:
-                if entry:
-                    entries.append(entry)
-
-                entry = dict(revision=match.group(1),
-                             datetime=match.group(2),
-                             by=str(match.group(3)).strip(),
-                             via=str(match.group(4)).strip(),
-                             comment=None)
-            else:
-                entry['comment'] = line.strip()
-
-        self.facts['commits'] = entries
-
-
-class Neighbors(FactsBase):
-
-    COMMANDS = [
-        'show lldp neighbors',
-        'show lldp neighbors detail',
-    ]
-
-    def populate(self):
-        super(Neighbors, self).populate()
-
-        all_neighbors = self.responses[0]
-        if 'LLDP not configured' not in all_neighbors:
-            neighbors = self.parse(
-                self.responses[1]
-            )
-            self.facts['neighbors'] = self.parse_neighbors(neighbors)
-
-    def parse(self, data):
-        parsed = list()
-        values = None
-        for line in data.split('\n'):
-            if not line:
-                continue
-            elif line[0] == ' ':
-                values += '\n%s' % line
-            elif line.startswith('Interface'):
-                if values:
-                    parsed.append(values)
-                values = line
-        if values:
-            parsed.append(values)
-        return parsed
-
-    def parse_neighbors(self, data):
-        facts = dict()
-        for item in data:
-            interface = self.parse_interface(item)
-            host = self.parse_host(item)
-            port = self.parse_port(item)
-            if interface not in facts:
-                facts[interface] = list()
-            facts[interface].append(dict(host=host, port=port))
-        return facts
-
-    def parse_interface(self, data):
-        match = re.search(r'^Interface:\s+(\S+),', data)
-        return match.group(1)
-
-    def parse_host(self, data):
-        match = re.search(r'SysName:\s+(.+)$', data, re.M)
-        if match:
-            return match.group(1)
-
-    def parse_port(self, data):
-        match = re.search(r'PortDescr:\s+(.+)$', data, re.M)
-        if match:
-            return match.group(1)
-
-
-FACT_SUBSETS = dict(
-    default=Default,
-    neighbors=Neighbors,
-    config=Config
-)
-
-VALID_SUBSETS = frozenset(FACT_SUBSETS.keys())
-
-
 def main():
-    argument_spec = dict(
-        gather_subset=dict(default=['!config'], type='list')
-    )
+    """
+    Main entry point for module execution
+
+    :returns: ansible_facts
+    """
+    argument_spec = FactsArgs.argument_spec
 
     argument_spec.update(vyos_argument_spec)
 
     module = AnsibleModule(argument_spec=argument_spec,
                            supports_check_mode=True)
 
-    warnings = list()
-
-    gather_subset = module.params['gather_subset']
-
-    runable_subsets = set()
-    exclude_subsets = set()
-
-    for subset in gather_subset:
-        if subset == 'all':
-            runable_subsets.update(VALID_SUBSETS)
-            continue
-
-        if subset.startswith('!'):
-            subset = subset[1:]
-            if subset == 'all':
-                exclude_subsets.update(VALID_SUBSETS)
-                continue
-            exclude = True
-        else:
-            exclude = False
-
-        if subset not in VALID_SUBSETS:
-            module.fail_json(msg='Subset must be one of [%s], got %s' %
-                             (', '.join(VALID_SUBSETS), subset))
-
-        if exclude:
-            exclude_subsets.add(subset)
-        else:
-            runable_subsets.add(subset)
-
-    if not runable_subsets:
-        runable_subsets.update(VALID_SUBSETS)
-
-    runable_subsets.difference_update(exclude_subsets)
-    runable_subsets.add('default')
-
-    facts = dict()
-    facts['gather_subset'] = list(runable_subsets)
-
-    instances = list()
-    for key in runable_subsets:
-        instances.append(FACT_SUBSETS[key](module))
+    warnings = ['default value for `gather_subset` '
+                'will be changed to `min` from `!config` v2.11 onwards']
 
-    for inst in instances:
-        inst.populate()
-        facts.update(inst.facts)
+    result = Facts(module).get_facts()
 
-    ansible_facts = dict()
-    for key, value in iteritems(facts):
-        key = 'ansible_net_%s' % key
-        ansible_facts[key] = value
+    ansible_facts, additional_warnings = result
+    warnings.extend(additional_warnings)
 
     module.exit_json(ansible_facts=ansible_facts, warnings=warnings)
 
diff --git a/plugins/modules/vyos_interfaces.py b/plugins/modules/vyos_interfaces.py
new file mode 100644
index 0000000..4ed2712
--- /dev/null
+++ b/plugins/modules/vyos_interfaces.py
@@ -0,0 +1,876 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+
+# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+
+#############################################
+#                WARNING                    #
+#############################################
+#
+# This file is auto generated by the resource
+#   module builder playbook.
+#
+# Do not edit this file manually.
+#
+# Changes to this file will be over written
+#   by the resource module builder.
+#
+# Changes should be made in the model used to
+#   generate this file or in the resource module
+#   builder template.
+#
+#############################################
+
+"""
+The module file for vyos_interfaces
+"""
+
+from __future__ import absolute_import, division, print_function
+__metaclass__ = type
+
+ANSIBLE_METADATA = {
+    'metadata_version': '1.1',
+    'status': ['preview'],
+    'supported_by': 'network'
+}
+
+DOCUMENTATION = """
+---
+module: vyos_interfaces
+version_added: 2.9
+short_description: Manages interface attributes of VyOS network devices.
+description:
+  - This module manages the interface attributes on VyOS network devices.
+  - This module supports managing base attributes of Ethernet, Bonding,
+    VXLAN, Loopback and Virtual Tunnel Interfaces.
+author: Nilashish Chakraborty (@nilashishc)
+options:
+  config:
+    description: The provided interfaces configuration.
+    type: list
+    suboptions:
+      name:
+        description:
+        - Full name of the interface, e.g. eth0, eth1, bond0, vti1, vxlan2.
+        type: str
+        required: True
+      description:
+        description:
+          - Interface description.
+        type: str
+      duplex:
+        description:
+          - Interface duplex mode.
+          - Applicable for Ethernet interfaces only.
+        choices: ['full', 'half', 'auto']
+        type: str
+      enabled:
+        default: True
+        description:
+          - Administrative state of the interface.
+          - Set the value to C(true) to administratively enable
+            the interface or C(false) to disable it.
+        type: bool
+      mtu:
+        description:
+          - MTU for a specific interface. Refer to vendor documentation for valid values.
+          - Applicable for Ethernet, Bonding, VXLAN and Virtual Tunnel interfaces.
+        type: int
+      speed:
+        description:
+          - Interface link speed.
+          - Applicable for Ethernet interfaces only.
+        type: str
+        choices: ['auto', '10', '100', '1000', '2500', '10000']
+      vifs:
+        description:
+          - Virtual sub-interfaces related configuration.
+          - 802.1Q VLAN interfaces are represented as virtual sub-interfaces in VyOS.
+        type: list
+        suboptions:
+          vlan_id:
+            description:
+              - Identifier for the virtual sub-interface.
+            type: int
+          description:
+            description:
+              - Virtual sub-interface description.
+            type: str
+          enabled:
+            description:
+              - Administrative state of the virtual sub-interface.
+              - Set the value to C(true) to administratively enable
+                the interface or C(false) to disable it.
+            type: bool
+            default: True
+          mtu:
+            description:
+              - MTU for the virtual sub-interface.
+              - Refer to vendor documentation for valid values.
+            type: int
+  state:
+    description:
+      - The state the configuration should be left in.
+    type: str
+    choices:
+    - merged
+    - replaced
+    - overridden
+    - deleted
+    default: merged
+"""
+EXAMPLES = """
+# Using merged
+#
+# -------------
+# Before state:
+# -------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces loopback lo
+
+- name: Merge provided configuration with device configuration
+  vyos_interfaces:
+    config:
+      - name: eth2
+        description: 'Configured by Ansible'
+        enabled: True
+        vifs:
+          - vlan_id: 200
+            description: "VIF 200 - ETH2"
+
+      - name: eth3
+        description: 'Configured by Ansible'
+        mtu: 1500
+
+      - name: bond1
+        description: 'Bond - 1'
+        mtu: 1200
+
+      - name: vti2
+        description: 'VTI - 2'
+        enabled: false
+    state: merged
+#
+#
+# -------------------------
+# Module Execution Result
+# -------------------------
+#
+# "before": [
+#      	{
+#            "enabled": true,
+#            "name": "lo"
+#      	},
+#       {
+#            "enabled": true,
+#            "name": "eth3"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth2"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth1"
+#        },
+#        {
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+# "commands": [
+#        "set interfaces ethernet eth2 description 'Configured by Ansible'",
+#        "set interfaces ethernet eth2 vif 200",
+#        "set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'",
+#        "set interfaces ethernet eth3 description 'Configured by Ansible'",
+#        "set interfaces ethernet eth3 mtu '1500'",
+#        "set interfaces bonding bond1",
+#        "set interfaces bonding bond1 description 'Bond - 1'",
+#        "set interfaces bonding bond1 mtu '1200'",
+#        "set interfaces vti vti2",
+#        "set interfaces vti vti2 description 'VTI - 2'",
+#        "set interfaces vti vti2 disable"
+#    ]
+#
+# "after": [
+#        {
+#            "description": "Bond - 1",
+#            "enabled": true,
+#            "mtu": 1200,
+#            "name": "bond1"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "description": "VTI - 2",
+#            "enabled": false,
+#            "name": "vti2"
+#        },
+#        {
+#            "description": "Configured by Ansible",
+#            "enabled": true,
+#            "mtu": 1500,
+#            "name": "eth3"
+#        },
+#        {
+#            "description": "Configured by Ansible",
+#            "enabled": true,
+#            "name": "eth2",
+#            "vifs": [
+#                {
+#                    "description": "VIF 200 - ETH2",
+#                    "enabled": true,
+#                    "vlan_id": "200"
+#                }
+#            ]
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth1"
+#        },
+#        {
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+#
+# -------------
+# After state:
+# -------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces bonding bond1 description 'Bond - 1'
+# set interfaces bonding bond1 mtu '1200'
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'
+# set interfaces ethernet eth3 description 'Configured by Ansible'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 mtu '1500'
+# set interfaces loopback lo
+# set interfaces vti vti2 description 'VTI - 2'
+# set interfaces vti vti2 disable
+#
+
+
+# Using replaced
+#
+# -------------
+# Before state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep eth
+# set interfaces bonding bond1 description 'Bond - 1'
+# set interfaces bonding bond1 mtu '1400'
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 description 'Management Interface for the Appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Configured by Ansible Eng Team'
+# set interfaces ethernet eth1 duplex 'full'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth1 speed '100'
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 mtu '500'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth2 vif 200 description 'Configured by Ansible'
+# set interfaces ethernet eth3 description 'Configured by Ansible'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 mtu '1500'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+# set interfaces ethernet eth3 speed '100'
+# set interfaces loopback lo
+#
+#
+- name: Replace device configurations of listed interfaces with provided configurations
+  vyos_interfaces:
+    config:
+      - name: eth2
+        description: "Replaced by Ansible"
+
+      - name: eth3
+        description: "Replaced by Ansible"
+
+      - name: eth1
+        description: "Replaced by Ansible"
+    state: replaced
+#
+#
+# -----------------------
+# Module Execution Result
+# -----------------------
+#
+# "before": [
+#        {
+#            "description": "Bond - 1",
+#            "enabled": true,
+#            "mtu": 1400,
+#            "name": "bond1"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "description": "Configured by Ansible",
+#            "duplex": "full",
+#            "enabled": true,
+#            "mtu": 1500,
+#            "name": "eth3",
+#            "speed": "100"
+#        },
+#        {
+#            "description": "Configured by Ansible",
+#            "duplex": "full",
+#            "enabled": true,
+#            "mtu": 500,
+#            "name": "eth2",
+#            "speed": "100",
+#            "vifs": [
+#                {
+#                    "description": "VIF 200 - ETH2",
+#                    "enabled": true,
+#                    "vlan_id": "200"
+#                }
+#            ]
+#        },
+#        {
+#            "description": "Configured by Ansible Eng Team",
+#            "duplex": "full",
+#            "enabled": true,
+#            "name": "eth1",
+#            "speed": "100"
+#        },
+#        {
+#            "description": "Management Interface for the Appliance",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+# "commands": [
+#        "delete interfaces ethernet eth2 speed",
+#        "delete interfaces ethernet eth2 duplex",
+#        "delete interfaces ethernet eth2 mtu",
+#        "delete interfaces ethernet eth2 vif 200 description",
+#        "set interfaces ethernet eth2 description 'Replaced by Ansible'",
+#        "delete interfaces ethernet eth3 speed",
+#        "delete interfaces ethernet eth3 duplex",
+#        "delete interfaces ethernet eth3 mtu",
+#        "set interfaces ethernet eth3 description 'Replaced by Ansible'",
+#        "delete interfaces ethernet eth1 speed",
+#        "delete interfaces ethernet eth1 duplex",
+#        "set interfaces ethernet eth1 description 'Replaced by Ansible'"
+#    ]
+#
+# "after": [
+#        {
+#            "description": "Bond - 1",
+#            "enabled": true,
+#            "mtu": 1400,
+#            "name": "bond1"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "description": "Replaced by Ansible",
+#            "enabled": true,
+#            "name": "eth3"
+#        },
+#        {
+#            "description": "Replaced by Ansible",
+#            "enabled": true,
+#            "name": "eth2",
+#            "vifs": [
+#                {
+#                    "enabled": true,
+#                    "vlan_id": "200"
+#                }
+#            ]
+#        },
+#        {
+#            "description": "Replaced by Ansible",
+#            "enabled": true,
+#            "name": "eth1"
+#        },
+#        {
+#            "description": "Management Interface for the Appliance",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+#
+# -------------
+# After state:
+# -------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces bonding bond1 description 'Bond - 1'
+# set interfaces bonding bond1 mtu '1400'
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 description 'Management Interface for the Appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Replaced by Ansible'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth2 description 'Replaced by Ansible'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth2 vif 200
+# set interfaces ethernet eth3 description 'Replaced by Ansible'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces loopback lo
+#
+#
+# Using overridden
+#
+#
+# --------------
+# Before state
+# --------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 description 'Ethernet Interface - 0'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 mtu '1200'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Configured by Ansible Eng Team'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 mtu '100'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth1 vif 100 description 'VIF 100 - ETH1'
+# set interfaces ethernet eth1 vif 100 disable
+# set interfaces ethernet eth2 description 'Configured by Ansible Team (Admin Down)'
+# set interfaces ethernet eth2 disable
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 mtu '600'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth3 description 'Configured by Ansible Network'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces loopback lo
+# set interfaces vti vti1 description 'Virtual Tunnel Interface - 1'
+# set interfaces vti vti1 mtu '68'
+#
+#
+- name: Overrides all device configuration with provided configuration
+  vyos_interfaces:
+    config:
+      - name: eth0
+        description: Outbound Interface For The Appliance
+        speed: auto
+        duplex: auto
+
+      - name: eth2
+        speed: auto
+        duplex: auto
+
+      - name: eth3
+        mtu: 1200
+    state: overridden
+#
+#
+# ------------------------
+# Module Execution Result
+# ------------------------
+#
+# "before": [
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "description": "Virtual Tunnel Interface - 1",
+#            "enabled": true,
+#            "mtu": 68,
+#            "name": "vti1"
+#        },
+#        {
+#            "description": "Configured by Ansible Network",
+#            "enabled": true,
+#            "name": "eth3"
+#        },
+#        {
+#            "description": "Configured by Ansible Team (Admin Down)",
+#            "enabled": false,
+#            "mtu": 600,
+#            "name": "eth2"
+#        },
+#        {
+#            "description": "Configured by Ansible Eng Team",
+#            "enabled": true,
+#            "mtu": 100,
+#            "name": "eth1",
+#            "vifs": [
+#                {
+#                    "description": "VIF 100 - ETH1",
+#                    "enabled": false,
+#                    "vlan_id": "100"
+#                }
+#            ]
+#        },
+#        {
+#            "description": "Ethernet Interface - 0",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "mtu": 1200,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+# "commands": [
+#        "delete interfaces vti vti1 description",
+#        "delete interfaces vti vti1 mtu",
+#        "delete interfaces ethernet eth1 description",
+#        "delete interfaces ethernet eth1 mtu",
+#        "delete interfaces ethernet eth1 vif 100 description",
+#        "delete interfaces ethernet eth1 vif 100 disable",
+#        "delete interfaces ethernet eth0 mtu",
+#        "set interfaces ethernet eth0 description 'Outbound Interface For The Appliance'",
+#        "delete interfaces ethernet eth2 description",
+#        "delete interfaces ethernet eth2 mtu",
+#        "set interfaces ethernet eth2 duplex 'auto'",
+#        "delete interfaces ethernet eth2 disable",
+#        "set interfaces ethernet eth2 speed 'auto'",
+#        "delete interfaces ethernet eth3 description",
+#        "set interfaces ethernet eth3 mtu '1200'"
+#    ],
+#
+# "after": [
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "vti1"
+#        },
+#        {
+#            "enabled": true,
+#            "mtu": 1200,
+#            "name": "eth3"
+#        },
+#        {
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth2",
+#            "speed": "auto"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth1",
+#            "vifs": [
+#                {
+#                    "enabled": true,
+#                    "vlan_id": "100"
+#                }
+#            ]
+#        },
+#        {
+#            "description": "Outbound Interface For The Appliance",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+#
+# ------------
+# After state
+# ------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 description 'Outbound Interface For The Appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth1 vif 100
+# set interfaces ethernet eth2 duplex 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth2 speed 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 mtu '1200'
+# set interfaces loopback lo
+# set interfaces vti vti1
+#
+#
+# Using deleted
+#
+#
+# -------------
+# Before state
+# -------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces bonding bond0 mtu '1300'
+# set interfaces bonding bond1 description 'LAG - 1'
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 description 'Outbound Interface for this appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 description 'Configured by Ansible Network'
+# set interfaces ethernet eth1 duplex 'full'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth1 speed '100'
+# set interfaces ethernet eth2 description 'Configured by Ansible'
+# set interfaces ethernet eth2 disable
+# set interfaces ethernet eth2 duplex 'full'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 mtu '600'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth2 speed '100'
+# set interfaces ethernet eth3 description 'Configured by Ansible Network'
+# set interfaces ethernet eth3 duplex 'full'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 speed '100'
+# set interfaces loopback lo
+#
+#
+- name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves)
+  vyos_interfaces:
+    config:
+      - name: bond1
+
+      - name: eth1
+
+      - name: eth2
+
+      - name: eth3
+    state: deleted
+#
+#
+# ------------------------
+# Module Execution Results
+# ------------------------
+#
+# "before": [
+#        {
+#            "enabled": true,
+#            "mtu": 1300,
+#            "name": "bond0"
+#        },
+#        {
+#            "description": "LAG - 1",
+#            "enabled": true,
+#            "name": "bond1"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "description": "Configured by Ansible Network",
+#            "duplex": "full",
+#            "enabled": true,
+#            "name": "eth3",
+#            "speed": "100"
+#        },
+#        {
+#            "description": "Configured by Ansible",
+#            "duplex": "full",
+#            "enabled": false,
+#            "mtu": 600,
+#            "name": "eth2",
+#            "speed": "100"
+#        },
+#        {
+#            "description": "Configured by Ansible Network",
+#            "duplex": "full",
+#            "enabled": true,
+#            "name": "eth1",
+#            "speed": "100"
+#        },
+#        {
+#            "description": "Outbound Interface for this appliance",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+# "commands": [
+#        "delete interfaces bonding bond1 description",
+#        "delete interfaces ethernet eth1 speed",
+#        "delete interfaces ethernet eth1 duplex",
+#        "delete interfaces ethernet eth1 description",
+#        "delete interfaces ethernet eth2 speed",
+#        "delete interfaces ethernet eth2 disable",
+#        "delete interfaces ethernet eth2 duplex",
+#        "delete interfaces ethernet eth2 disable",
+#        "delete interfaces ethernet eth2 description",
+#        "delete interfaces ethernet eth2 disable",
+#        "delete interfaces ethernet eth2 mtu",
+#        "delete interfaces ethernet eth2 disable",
+#        "delete interfaces ethernet eth3 speed",
+#        "delete interfaces ethernet eth3 duplex",
+#        "delete interfaces ethernet eth3 description"
+#    ]
+#
+# "after": [
+#        {
+#            "enabled": true,
+#            "mtu": 1300,
+#            "name": "bond0"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "bond1"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "lo"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth3"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth2"
+#        },
+#        {
+#            "enabled": true,
+#            "name": "eth1"
+#        },
+#        {
+#            "description": "Outbound Interface for this appliance",
+#            "duplex": "auto",
+#            "enabled": true,
+#            "name": "eth0",
+#            "speed": "auto"
+#        }
+#    ]
+#
+#
+# ------------
+# After state
+# ------------
+#
+# vyos@vyos:~$ show configuration commands | grep interfaces
+# set interfaces bonding bond0 mtu '1300'
+# set interfaces bonding bond1
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 description 'Outbound Interface for this appliance'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9'
+# set interfaces ethernet eth1 smp-affinity 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth2 smp-affinity 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces loopback lo
+#
+#
+"""
+RETURN = """
+before:
+  description: The configuration prior to the model invocation.
+  returned: always
+  sample: >
+    The configuration returned will always be in the same format
+     of the parameters above.
+  type: list
+after:
+  description: The resulting configuration model invocation.
+  returned: when changed
+  sample: >
+    The configuration returned will always be in the same format
+     of the parameters above.
+  type: list
+commands:
+  description: The set of commands pushed to the remote device.
+  returned: always
+  type: list
+  sample:
+    - 'set interfaces ethernet eth1 mtu 1200'
+    - 'set interfaces ethernet eth2 vif 100 description VIF 100'
+"""
+
+
+from ansible.module_utils.basic import AnsibleModule
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.interfaces.interfaces import InterfacesArgs
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.interfaces.interfaces import Interfaces
+
+
+def main():
+    """
+    Main entry point for module execution
+
+    :returns: the result form module invocation
+    """
+    module = AnsibleModule(argument_spec=InterfacesArgs.argument_spec,
+                           supports_check_mode=True)
+
+    result = Interfaces(module).execute_module()
+    module.exit_json(**result)
+
+
+if __name__ == '__main__':
+    main()
diff --git a/plugins/modules/vyos_l3_interfaces.py b/plugins/modules/vyos_l3_interfaces.py
new file mode 100644
index 0000000..7ef020e
--- /dev/null
+++ b/plugins/modules/vyos_l3_interfaces.py
@@ -0,0 +1,372 @@
+#!/usr/bin/python
+# -*- coding: utf-8 -*-
+# Copyright 2019 Red Hat
+# GNU General Public License v3.0+
+# (see COPYING or https://www.gnu.org/licenses/gpl-3.0.txt)
+
+#############################################
+#                WARNING                    #
+#############################################
+#
+# This file is auto generated by the resource
+#   module builder playbook.
+#
+# Do not edit this file manually.
+#
+# Changes to this file will be over written
+#   by the resource module builder.
+#
+# Changes should be made in the model used to
+#   generate this file or in the resource module
+#   builder template.
+#
+#############################################
+
+"""
+The module file for vyos_l3_interfaces
+"""
+
+from __future__ import (absolute_import, division, print_function)
+__metaclass__ = type
+
+ANSIBLE_METADATA = {
+    'metadata_version': '1.1',
+    'status': ['preview'],
+    'supported_by': 'network'
+}
+
+DOCUMENTATION = """
+---
+module: vyos_l3_interfaces
+version_added: 2.9
+short_description: Manages L3 interface attributes of VyOS network devices.
+description: This module manages the L3 interface attributes on VyOS network devices.
+author: Nilashish Chakraborty (@NilashishC)
+options:
+  config:
+    description: The provided L3 interfaces configuration.
+    type: list
+    elements: dict
+    suboptions:
+      name:
+        description:
+          - Full name of the interface, e.g. eth0, eth1.
+        type: str
+        required: True
+      ipv4:
+        description:
+          - List of IPv4 addresses of the interface.
+        type: list
+        elements: dict
+        suboptions:
+          address:
+            description:
+              - IPv4 address of the interface.
+            type: str
+      ipv6:
+        description:
+          - List of IPv6 addresses of the interface.
+        type: list
+        elements: dict
+        suboptions:
+          address:
+            description:
+              - IPv6 address of the interface.
+            type: str
+      vifs:
+        description:
+          - Virtual sub-interfaces L3 configurations.
+        elements: dict
+        type: list
+        suboptions:
+          vlan_id:
+            description:
+              - Identifier for the virtual sub-interface.
+            type: int
+          ipv4:
+            description:
+              - List of IPv4 addresses of the virtual interface.
+            type: list
+            elements: dict
+            suboptions:
+              address:
+                description:
+                  - IPv4 address of the virtual interface.
+                type: str
+          ipv6:
+            description:
+              - List of IPv6 addresses of the virual interface.
+            type: list
+            elements: dict
+            suboptions:
+              address:
+                description:
+                  - IPv6 address of the virtual interface.
+                type: str
+  state:
+    description:
+      - The state the configuration should be left in.
+    type: str
+    choices:
+    - merged
+    - replaced
+    - overridden
+    - deleted
+    default: merged
+
+"""
+EXAMPLES = """
+# Using merged
+#
+# Before state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep -e eth[2,3]
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101
+# set interfaces ethernet eth3 vif 102
+
+- name: Merge provided configuration with device configuration
+  vyos_l3_interfaces:
+    config:
+      - name: eth2
+        ipv4:
+          - address: 192.0.2.10/28
+          - address: 198.51.100.40/27
+        ipv6:
+          - address: 2001:db8:100::2/32
+          - address: 2001:db8:400::10/32
+
+      - name: eth3
+        ipv4:
+          - address: 203.0.113.65/26
+        vifs:
+          - vlan_id: 101
+            ipv4:
+              - address: 192.0.2.71/28
+              - address: 198.51.100.131/25
+          - vlan_id: 102
+            ipv6:
+              - address: 2001:db8:1000::5/38
+              - address: 2001:db8:1400::3/38
+    state: merged
+
+# After state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep -e eth[2,3]
+# set interfaces ethernet eth2 address '192.0.2.10/28'
+# set interfaces ethernet eth2 address '198.51.100.40/27'
+# set interfaces ethernet eth2 address '2001:db8:100::2/32'
+# set interfaces ethernet eth2 address '2001:db8:400::10/32'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 address '203.0.113.65/26'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101 address '192.0.2.71/28'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:1000::5/38'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:1400::3/38'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
+
+
+# Using replaced
+#
+# Before state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
+# set interfaces ethernet eth1 address '192.0.2.14/24'
+# set interfaces ethernet eth2 address '192.0.2.10/24'
+# set interfaces ethernet eth2 address '192.0.2.11/24'
+# set interfaces ethernet eth2 address '2001:db8::10/32'
+# set interfaces ethernet eth2 address '2001:db8::11/32'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 address '198.51.100.10/24'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
+#
+- name: Replace device configurations of listed interfaces with provided configurations
+  vyos_l3_interfaces:
+    config:
+      - name: eth2
+        ipv4:
+          - address: 192.0.2.10/24
+
+      - name: eth3
+        ipv6:
+          - address: 2001:db8::11/32
+    state: replaced
+
+# After state:
+# -------------
+#
+# vyos:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
+# set interfaces ethernet eth1 address '192.0.2.14/24'
+# set interfaces ethernet eth2 address '192.0.2.10/24'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 address '2001:db8::11/32'
+# set interfaces ethernet eth3 vif 101
+# set interfaces ethernet eth3 vif 102
+
+
+# Using overridden
+#
+# Before state
+# --------------
+#
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
+# set interfaces ethernet eth1 address '192.0.2.14/24'
+# set interfaces ethernet eth2 address '192.0.2.10/24'
+# set interfaces ethernet eth2 address '192.0.2.11/24'
+# set interfaces ethernet eth2 address '2001:db8::10/32'
+# set interfaces ethernet eth2 address '2001:db8::11/32'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 address '198.51.100.10/24'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
+
+- name: Overrides all device configuration with provided configuration
+  vyos_l3_interfaces:
+    config:
+      - name: eth0
+        ipv4:
+          - address: dhcp
+        ipv6:
+          - address: dhcpv6
+    state: overridden
+
+# After state
+# ------------
+#
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 address 'dhcpv6'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101
+# set interfaces ethernet eth3 vif 102
+
+
+# Using deleted
+#
+# Before state
+# -------------
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22'
+# set interfaces ethernet eth0 smp-affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:EA:0F:B9'
+# set interfaces ethernet eth1 address '192.0.2.14/24'
+# set interfaces ethernet eth2 address '192.0.2.10/24'
+# set interfaces ethernet eth2 address '192.0.2.11/24'
+# set interfaces ethernet eth2 address '2001:db8::10/32'
+# set interfaces ethernet eth2 address '2001:db8::11/32'
+# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23'
+# set interfaces ethernet eth3 address '198.51.100.10/24'
+# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.130/25'
+# set interfaces ethernet eth3 vif 101 address '198.51.100.131/25'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::3/34'
+# set interfaces ethernet eth3 vif 102 address '2001:db8:4000::2/34'
+
+- name: Delete L3 attributes of given interfaces (Note - This won't delete the interface itself)
+  vyos_l3_interfaces:
+    config:
+      - name: eth1
+      - name: eth2
+      - name: eth3
+    state: deleted
+
+# After state
+# ------------
+# vyos@vyos-appliance:~$ show configuration commands | grep eth
+# set interfaces ethernet eth0 address 'dhcp'
+# set interfaces ethernet eth0 duplex 'auto'
+# set interfaces ethernet eth0 hw-id '08:00:27:f3:6c:b5'
+# set interfaces ethernet eth0 smp_affinity 'auto'
+# set interfaces ethernet eth0 speed 'auto'
+# set interfaces ethernet eth1 hw-id '08:00:27:ad:ef:65'
+# set interfaces ethernet eth1 smp_affinity 'auto'
+# set interfaces ethernet eth2 hw-id '08:00:27:ab:4e:79'
+# set interfaces ethernet eth2 smp_affinity 'auto'
+# set interfaces ethernet eth3 hw-id '08:00:27:17:3c:85'
+# set interfaces ethernet eth3 smp_affinity 'auto'
+
+
+"""
+RETURN = """
+before:
+  description: The configuration prior to the model invocation.
+  returned: always
+  type: list
+  sample: >
+    The configuration returned will always be in the same format
+     of the parameters above.
+after:
+  description: The resulting configuration model invocation.
+  returned: when changed
+  type: list
+  sample: >
+    The configuration returned will always be in the same format
+     of the parameters above.
+commands:
+  description: The set of commands pushed to the remote device.
+  returned: always
+  type: list
+  sample: ['set interfaces ethernet eth1 192.0.2.14/2', 'set interfaces ethernet eth3 vif 101 address 198.51.100.130/25']
+"""
+
+
+from ansible.module_utils.basic import AnsibleModule
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.argspec.l3_interfaces.l3_interfaces import L3_interfacesArgs
+from ansible_collections.vyos.vyos.plugins.module_utils.network.vyos.config.l3_interfaces.l3_interfaces import L3_interfaces
+
+
+def main():
+    """
+    Main entry point for module execution
+
+    :returns: the result form module invocation
+    """
+    module = AnsibleModule(argument_spec=L3_interfacesArgs.argument_spec,
+                           supports_check_mode=True)
+
+    result = L3_interfaces(module).execute_module()
+    module.exit_json(**result)
+
+
+if __name__ == '__main__':
+    main()
diff --git a/plugins/modules/vyos_ping.py b/plugins/modules/vyos_ping.py
index fe7bd9d..95488ac 100644
--- a/plugins/modules/vyos_ping.py
+++ b/plugins/modules/vyos_ping.py
@@ -37,7 +37,7 @@ description:
   - For Windows targets, use the M(win_ping) module instead.
   - For targets running Python, use the M(ping) module instead.
 author:
-  - Nilashish Chakraborty (@nilashishc)
+  - Nilashish Chakraborty (@NilashishC)
 version_added: '2.8'
 options:
   dest:
diff --git a/plugins/modules/vyos_system.py b/plugins/modules/vyos_system.py
index f1f093d..e0684bf 100644
--- a/plugins/modules/vyos_system.py
+++ b/plugins/modules/vyos_system.py
@@ -26,7 +26,7 @@ DOCUMENTATION = """
 ---
 module: "vyos_system"
 version_added: "2.3"
-author: "Nathaniel Case (@qalthos)"
+author: "Nathaniel Case (@Qalthos)"
 short_description: Run `set system` commands on VyOS devices
 description:
   - Runs one or more commands on remote devices running VyOS.