| Age | Commit message (Collapse) | Author |
|---|
|
Raise runtime errors for unhandled cases which would cause other
exceptions. Ignore types for a few cases where a non-trivial
refactor would be required to prevent the warning.
Signed-off-by: Chris Patterson <cpatterson@microsoft.com>
|
|
|
|
Adds a new module to allow setting keyboard layout,
for use-cases in which cloud-init is used to configure
OS images meant for physical computers instead
of the cloud.
This initial release only implements support
for Linux distributions that allow layout to be
set through systemd's localectl.
LP: #1951593
|
|
Includes:
- Update tox.ini and .travis.yml accordingly
- Cleanup tox.ini with new tox syntax and cloud-init dependencies
- Update documentation accordingly
- Replace/remove xenial references where additional testing isn't required
- Remove xenial checks in integration tests
- Replace yield_fixture with fixture in pytest tests
Sections of code commented with lines like "Remove when Xenial is no
longer supported" still exist as they're require additional testing.
|
|
Applied Black and isort, fixed any linting issues, updated tox.ini
and CI.
|
|
|
|
|
|
This attempts to standardize unit test file location under test/unittests/
such that any source file located at cloudinit/path/to/file.py may have a
corresponding unit test file at test/unittests/path/to/test_file.py.
Noteworthy Comments:
====================
Four different duplicate test files existed:
test_{gpg,util,cc_mounts,cc_resolv_conf}.py
Each of these duplicate file pairs has been merged together. This is a
break in git history for these files.
The test suite appears to have a dependency on test order. Changing test
order causes some tests to fail. This should be rectified, but for now
some tests have been modified in
tests/unittests/config/test_set_passwords.py.
A helper class name starts with "Test" which causes pytest to try
executing it as a test case, which then throws warnings "due to Class
having __init__()". Silence by changing the name of the class.
# helpers.py is imported in many test files, import paths change
cloudinit/tests/helpers.py -> tests/unittests/helpers.py
# Move directories:
cloudinit/distros/tests -> tests/unittests/distros
cloudinit/cmd/devel/tests -> tests/unittests/cmd/devel
cloudinit/cmd/tests -> tests/unittests/cmd/
cloudinit/sources/helpers/tests -> tests/unittests/sources/helpers
cloudinit/sources/tests -> tests/unittests/sources
cloudinit/net/tests -> tests/unittests/net
cloudinit/config/tests -> tests/unittests/config
cloudinit/analyze/tests/ -> tests/unittests/analyze/
# Standardize tests already in tests/unittests/
test_datasource -> sources
test_distros -> distros
test_vmware -> sources/vmware
test_handler -> config # this contains cloudconfig module tests
test_runs -> runs
|
|
Given that there are additional network management tools that we haven't
yet supported with activators, we should log a warning and continue
without network activation here, especially since this was a no-op for
years.
LP: #1948681
|
|
Currently any attempt to run an apt command while another process holds
an apt lock will fail. We should instead wait to acquire the apt lock.
LP: #1944611
|
|
Whenever "apk upgrade" is triggered also use the "--available" and
"--update-cache" options to ensure that an up-to-date packages list
is used.
|
|
This was fixed in 1bbc4908ff7a2be19483811b3b6fee6ebc916235
|
|
Various modules restart services and they all have logic to try and
detect if they are running on a system that needs 'systemctl' or
'service', and then have code to decide which order the arguments
need to be etc. On top of that, not all modules do this in the same way.
The duplication and different approaches are not ideal but this also
makes it hard to add support for a new distribution that does not use
either 'systemctl' or 'service'.
This change adds a new manage_service() method to the distro class
and updates several modules to use it.
|
|
In #919 (81299de), we refactored some of the code used to bring up
networks across distros. Previously, the call to bring up network
interfaces during 'init' stage unintentionally resulted in a no-op
such that network interfaces were NEVER brought up by cloud-init, even
if new network interfaces were found after crawling the metadata.
The code was altered to bring up these discovered network interfaces.
On ubuntu, this results in a 'netplan apply' call during 'init' stage
for any ubuntu-based distro on a datasource that has a NETWORK
dependency. On GCE, this additional 'netplan apply' conflicts with the
google-guest-agent service, resulting in an instance that can no
be connected to.
This commit adds a 'disable_network_activation' option that can be
enabled in /etc/cloud.cfg to disable the activation of network
interfaces in 'init' stage.
LP: #1938299
|
|
No functional changes.
|
|
openEuler Homepage: https://www.openeuler.org/en/
|
|
https://www.cloudlinux.com/
|
|
Using flake8 inplace of pyflakes
Renamed run-pyflakes -> run-flake8
Changed target name to flake8 in Makefile
With pyflakes we can't suppress warnings/errors in few required places.
flake8 is flexible in that regard. Hence using flake8 seems to be a
better choice here.
flake8 does the job of pep8 anyway.
So, removed pep8 target from Makefile along with tools/run-pep8 script.
Included setup.py in flake8 checks
|
|
|
|
|
|
Currently cloud-init generates fallback network config on various
scenarios.
For example:
1. When no DS found
2. There is no 'network' info given in DS metadata.
3. If a DS gives a network config once and upon reboot if DS doesn't
give any network info, previously set network data will be
overridden.
A newly introduced key in cloud.cfg.tmpl can be used to control this
behavior on PhotonOS.
Also, if OS comes with a set of default network files(configs), like in
PhotonOS, cloud-init should not overwrite them by default.
This change also includes some nitpicking changes of reorganizing few
config variables.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
|
|
Virtuozzo Linux is a distro based off of CentOS 8, similar to Alma Linux and Rocky Linux.
|
|
In CI run against pylint 2.9.3 and fix occurrences of:
- W0237 (arguments-renamed)
- W0402 (deprecated-module)
The W0402 deprecated-module was about module `imp`:
cloudinit/patcher.py:9: [W0402(deprecated-module), ]
Uses of a deprecated module 'imp'
The imp module is deprecated and replaced by importlib, which according
to the documentation has no replacement for acquire_lock() and
release_lock(), which are the only reason why `imp` is imported.
Nothing about the code using this lock that actually requires it.
Let's remove the locking code and the import altogether.
Dropping the locking makes patcher.patch() an empty wrapper around
_patch_logging(). Rename _patch_logging() to patch_logging() and
call it directly instead. Drop patch().
|
|
Adds a udev script which will invoke a hotplug hook script on all net
add events. The script will write some udev arguments to a systemd FIFO
socket (to ensure we have only instance of cloud-init running at a
time), which is then read by a new service that calls a new 'cloud-init
devel hotplug-hook' command to handle the new event.
This hotplug-hook command will:
- Fetch the pickled datsource
- Verify that the hotplug event is supported/enabled
- Update the metadata for the datasource
- Ensure the hotplugged device exists within the datasource
- Apply the config change on the datasource metadata
- Bring up the new interface (or apply global network configuration)
- Save the updated metadata back to the pickle cache
Also scattered in some unrelated typing where helpful
|
|
Currently _bring_up_interfaces() is a no-op for any distro using
renderers. We need to be able to support bringing up a single
interfaces, a list of interfaces, and all interfaces. This should be
independent of the renderers, as the network config is often
generated independent of the mechanism used to apply it.
Additionally, I included a refactor to remove
"_supported_write_network_config". We had a confusing call chain of
apply_network_config->_write_network_config->_supported_write_network_config.
The last two have been combined.
|
|
Minor fixes in networkd renderer & fixed corresponding tests
Removed datasource_list for Photon from cloud.cfg.tmpl & added a comment
in cloud.cfg.tmpl about not to use multiline array for datasource_list.
Signed-off-by: Shreenidhi Shedi <sshedi@vmware.com>
|
|
Also added a new (currently experimental) systemd-networkd renderer,
and includes a small refactor to cc_resolv_conf.py to support the
resolved.conf used by systemd-resolved.
|
|
- Mostly based on FreeBSD, the main exception is that
`find_devs_with_on_freebsd` does not work.
- Since we cannot get the CDROM or the partition labels,
`find_devs_with_on_dragonflybsd()` has a more naive approach and
returns all the block devices.
|
|
Rocky Linux is a RHEL-compatible distribution so all changes that have
been made should be trivial.
|
|
In newer versions of python, when using urllib.parse, lines containing
newline or tab characters now get sanitized. This caused a unit test to
fail.
See https://bugs.python.org/issue43882
|
|
AlmaLinux OS is RHEL-compatible so all the changes needed are trivial.
|
|
the above option allows the user to control the behavior of a distro
hostname selection if both short hostname and FQDN are supplied.
If `prefer_fqdn_over_hostname` is true the FQDN will be selected as
hostname; if false the hostname will be selected
LP: #1921004
|
|
The locale wasn't persisted correct nor set.
LP: #1402406
|
|
hostname (inetutils) isn't installed per default on arch, so switch
to hostnamectl which is installed per default (systemd).
|
|
Since version 1.9.1, @includedir can be used in the sudoers files
instead of #includedir:
https://github.com/sudo-project/sudo/releases/tag/SUDO_1_9_1
Actually "@includedir" is the modern syntax, and "#includedir" the historic
syntax. It has been considered that "#includedir" was too puzzling because
it started with a "#" that otherwise denotes comments.
This happens to be the default in SUSE Linux enterprise sudoer package,
so cloudinit should take this into account.
Otherwise, cloudinit was adding an extra #includedir, which was
resulting on the files under /etc/sudoers.d being included twice, one by
@includedir from the SUSE package, one by the @includedir from
cloudinit. The consequence of this, was that if you were defining an
Cmnd_Alias inside any of those files, this was being defined twice and
creating an error when using sudo.
|
|
pacman uses `-u` instead of `upgrade` to trigger a system upgrade, fix
the command handling so this is properly accounted for. as is, the
resulting command attempts to install a (non-existent) `upgrade` package
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
Adds the ability to run the Azure preprovisioned VMs as NIC-less and
then hot-attach them when assigned for reprovision.
The NIC on the preprovisioned VM is hot-detached as soon as it reports
ready and goes into wait for one or more interfaces to be hot-attached.
Once they are attached, cloud-init gets the expected number of NICs (in
case there are more than one) that will be attached from IMDS and waits
until all of them are attached. After all the NICs are attached,
reprovision proceeds as usual.
|
|
This commit does the following:
* introduces the `cloudinit.persistence` module, containing
`CloudInitPickleMixin` which provides lightweight versioning of
objects' pickled representations (and associated testing)
* introduces a basic upgrade testing framework (in
`cloudinit.tests.test_upgrade`) which unpickles pickles from previous
versions of cloud-init (stored in `tests/data/old_pickles`) and tests
invariants that the current cloud-init codebase expects
* uses the versioning framework to address an upgrade issue where
`Distro.networking` could get into an unexpected state, and uses the
upgrade testing framework to confirm that the issue is addressed
|
|
Gentoo's hostname file format instead of being just the host name
is hostname=thename". The old code works fine when the file has no comments
but if there is a comment the line
```
gentoo_hostname_config = 'hostname="%s"' % conf
```
can render an invalid hostname file that looks similar to
```
hostname="#This is the host namehello"
```
The fix inserts the hostname in a gentoo friendly way so that it gets
handled by HostnameConf as a whole and comments are handled and preserved
|
|
update_resolve_conf_file is no longer used. The last reference
to it was removed in c3680475f9c970, which was itself a "remove dead
code" commit.
|
|
enumeration of physical network devices (#591)
|
|
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
Under FreeBSD, we want to use "shutdown -p" for poweroff.
Alpine Linux also has some specificities.
We choose to define a method that returns the shutdown command line to
use, rather than a method that actually does the shutdown. This makes it
easier to have the tests in test_handler_power_state do their
verifications.
Two tests are added for the special behaviours that are known so far.
|
|
Co-authored-by: Rick Harding <rharding@mitechie.com>
|
|
Changes:
tox: bump the pylint version to 2.6.0 in the default run
Fix pylint 2.6.0 W0707 warnings (raise-missing-from)
|
|
Add new module cc_apk_configure for creating Alpine /etc/apk/repositories file.
Modify cc_ca_certs, cc_ntp, cc_power_state_change, and cc_resolv_conf for Alpine.
Add Alpine template files for Chrony and Busybox NTP support.
Add Alpine template file for /etc/hosts.
|
|
This aligns their docstrings more closely with their actual behaviour.
|
|
* cloudinit: remove global disable of pylint W0107 and fix errors
This includes removing a test class which contained no tests but wasn't
detected as empty because of an errant pass statement.
* .pylintrc: update disable comment to match arguments
|
|
* Refactor `cloudinit.net.wait_for_physdevs` to `cloudinit.distros.networking.Networking.wait_for_physdevs`
* Split the Linux-specific `udevadm_settle` call out to a separate abstract `Networking.settle` method; implement it on `LinuxNetworking` and add a `NotImplementedError` implementation to `BSDNetworking`
* Modify `wait_for_physdevs`s one callsite to use the new location
LP: #1884626
|
|
This includes a fix to a test that had a string concatenation issue, and
so was only testing a prefix of what was intended.
|
