Merge remote-tracking branch 'origin/current' into fix/codecopier-snippet-leak-and-clipboard-error

# Conflicts:
#	docs/_static/js/codecopier.js

1 files changed, 114 insertions, 0 deletions

diff --git a/docs/configexamples/pppoe-ipv6-basic.md b/docs/configexamples/pppoe-ipv6-basic.md
new file mode 100644
index 00000000..76984f4b
--- /dev/null
+++ b/docs/configexamples/pppoe-ipv6-basic.md
@@ -0,0 +1,114 @@
+---
+lastproofread: '2021-06-29'
+---
+
+(examples-pppoe-ipv6-basic)=
+
+# PPPoE IPv6 Basic Setup for Home Network
+
+This document is to describe a basic setup using PPPoE with DHCPv6-PD +
+SLAAC to construct a typical home network. The user can follow the steps
+described here to quickly setup a working network and use this as a starting
+point to further configure or fine-tune other settings.
+
+To achieve this, your ISP is required to support DHCPv6-PD. If you're not sure,
+please contact your ISP for more information.
+
+## Network Topology
+
+```{image} /_static/images/pppoe-ipv6-pd-diagram.webp
+:align: center
+:alt: Network Topology Diagram
+:width: 60%
+```
+
+
+## Configurations
+
+### PPPoE Setup
+
+```none
+set interfaces pppoe pppoe0 authentication password <YOUR PASSWORD>
+set interfaces pppoe pppoe0 authentication username <YOUR USERNAME>
+set interfaces pppoe pppoe0 service-name <YOUR SERVICENAME>
+set interfaces pppoe pppoe0 source-interface 'eth0'
+```
+
+- Fill `password` and `user` with the credential provided by your ISP.
+- `service-name` can be an arbitrary string.
+
+### DHCPv6-PD Setup
+
+During address configuration, in addition to assigning an address to the WAN
+interface, ISP also provides a prefix to allow the router to configure addresses
+of LAN interface and other nodes connecting to LAN, which is called prefix
+delegation (PD).
+
+```none
+set interfaces pppoe pppoe0 ipv6 address autoconf
+set interfaces pppoe pppoe0 dhcpv6-options pd 0 interface eth1 address '100'
+```
+
+- Here we use the prefix to configure the address of eth1 (LAN) to form
+  `<prefix>::64`, where `64` is hexadecimal of address 100.
+
+<!-- list break -->
+
+- For home network users, most of time ISP only provides /64 prefix, hence
+  there is no need to set SLA ID and prefix length. See {ref}`pppoe-interface`
+  for more information.
+
+### Router Advertisement
+
+We need to enable router advertisement for LAN network so that PC can receive
+the prefix and use SLAAC to configure the address automatically.
+
+```none
+set service router-advert interface eth1 link-mtu '1492'
+set service router-advert interface eth1 name-server <NAME SERVER>
+set service router-advert interface eth1 prefix ::/64 valid-lifetime '172800'
+```
+
+- Set MTU in advertisement to 1492 because of PPPoE header overhead.
+- Set DNS server address in the advertisement so that clients can obtain it by
+  using RDNSS option. Most operating systems (Windows, Linux, Mac) should
+  already support it.
+- Here we set the prefix to `::/64` to indicate advertising any /64 prefix
+  the LAN interface is assigned.
+- Since some ISPs disconnects continuous connection for every 2~3 days, we set
+  `valid-lifetime` to 2 days to allow PC for phasing out old address.
+
+### Basic Firewall
+
+To have basic protection while keeping IPv6 network functional, we need to:
+- Allow all established and related traffic for router and LAN
+- Allow all icmpv6 packets for router and LAN
+- Allow DHCPv6 packets for router
+
+```none
+set firewall ipv6 name WAN_IN default-action 'drop'
+set firewall ipv6 name WAN_IN rule 10 action 'accept'
+set firewall ipv6 name WAN_IN rule 10 state established 'enable'
+set firewall ipv6 name WAN_IN rule 10 state related 'enable'
+set firewall ipv6 name WAN_IN rule 20 action 'accept'
+set firewall ipv6 name WAN_IN rule 20 protocol 'icmpv6'
+set firewall ipv6 name WAN_LOCAL default-action 'drop'
+set firewall ipv6 name WAN_LOCAL rule 10 action 'accept'
+set firewall ipv6 name WAN_LOCAL rule 10 state established 'enable'
+set firewall ipv6 name WAN_LOCAL rule 10 state related 'enable'
+set firewall ipv6 name WAN_LOCAL rule 20 action 'accept'
+set firewall ipv6 name WAN_LOCAL rule 20 protocol 'icmpv6'
+set firewall ipv6 name WAN_LOCAL rule 30 action 'accept'
+set firewall ipv6 name WAN_LOCAL rule 30 destination port '546'
+set firewall ipv6 name WAN_LOCAL rule 30 protocol 'udp'
+set firewall ipv6 name WAN_LOCAL rule 30 source port '547'
+set firewall ipv6 forward filter rule 10 action jump
+set firewall ipv6 forward filter rule 10 jump-target 'WAN_IN'
+set firewall ipv6 forward filter rule 10 inbound-interface name 'pppoe0'
+set firewall ipv6 input filter rule 10 action jump
+set firewall ipv6 input filter rule 10 jump-target 'WAN_LOCAL'
+set firewall ipv6 input filter rule 10 inbound-interface name 'pppoe0'
+```
+
+Note to allow the router to receive DHCPv6 response from ISP. We need to allow
+packets with source port 547 (server) and destination port 546 (client).