Revert "Add incremental RST-to-MyST swap mechanism (#1857)" (#1892)

This reverts commit 4b36114e053ee11d0cb264a1e4cfe4692d78f194.

1 files changed, 0 insertions, 205 deletions

diff --git a/docs/configuration/protocols/md-bfd.md b/docs/configuration/protocols/md-bfd.md
deleted file mode 100644
index 59541abc..00000000
--- a/docs/configuration/protocols/md-bfd.md
+++ /dev/null
@@ -1,205 +0,0 @@
----
-lastproofread: '2023-01-27'
----
-
-```{include} /_include/need_improvement.txt
-```
-
-(routing-bfd)=
-
-# BFD
-
-{abbr}`BFD (Bidirectional Forwarding Detection)` is described and extended by
-the following RFCs: {rfc}`5880`, {rfc}`5881` and {rfc}`5883`.
-
-In the age of very fast networks, a second of unreachability may equal millions of lost packets.
-The idea behind BFD is to detect very quickly when a peer is down and take action extremely fast.
-
-BFD sends lots of small UDP packets very quickly to ensures that the peer is still alive.
-
-This allows avoiding the timers defined in BGP and OSPF protocol to expires.
-
-## Configure BFD
-
-```{cfgcmd} set protocols bfd peer \<address\>
-
-Set BFD peer IPv4 address or IPv6 address
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> echo-mode
-
-Enables the echo transmission mode
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> multihop
-
-Allow this BFD peer to not be directly connected
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> source [address \<address\> | interface \<interface\>]
-
-Bind listener to specific interface/address, mandatory for IPv6
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> interval echo-interval \<10-60000\>
-
-The minimal echo receive transmission interval that this system is
-capable of handling
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> interval multiplier \<2-255\>
-
-Remote transmission interval will be multiplied by this value
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> interval [receive | transmit] \<10-60000\>
-
-Interval in milliseconds
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> shutdown
-
-Disable a BFD peer
-```
-
-```{cfgcmd} set protocols bfd peer \<address\> minimum-ttl \<1-254\>
-
-For multi hop sessions only. Configure the minimum expected TTL for an
-incoming BFD control packet.
-
-This feature serves the purpose of thightening the packet validation
-requirements to avoid receiving BFD control packets from other sessions.
-```
-
-### Enable BFD in BGP
-
-```{cfgcmd} set protocols bgp neighbor \<neighbor\> bfd
-
-Enable BFD on a single BGP neighbor
-```
-
-```{cfgcmd} set protocols bgp peer-group \<neighbor\> bfd
-
-Enable BFD on a BGP peer group
-```
-
-### Enable BFD in OSPF
-
-```{cfgcmd} set protocols ospf interface \<interface\> bfd
-
-   Enable BFD for OSPF on an interface
-
-```
-
-```{cfgcmd} set protocols ospfv3 interface \<interface\> bfd
-
-Enable BFD for OSPFv3 on an interface
-```
-
-### Enable BFD in ISIS
-
-```{cfgcmd} set protocols isis \<name\> interface \<interface\> bfd
-
-Enable BFD for ISIS on an interface
-
-```
-
-## Operational Commands
-
-```{opcmd} show bfd peers
-
-   Show all BFD peers
-
-   :::{code-block} none
-   BFD Peers:
-        peer 198.51.100.33 vrf default interface eth4.100
-                ID: 4182341893
-                Remote ID: 12678929647
-                Status: up
-                Uptime: 1 month(s), 16 hour(s), 29 minute(s), 38 second(s)
-                Diagnostics: ok
-                Remote diagnostics: ok
-                Local timers:
-                        Receive interval: 300ms
-                        Transmission interval: 300ms
-                        Echo transmission interval: 50ms
-                Remote timers:
-                        Receive interval: 300ms
-                        Transmission interval: 300ms
-                        Echo transmission interval: 0ms
-
-        peer 198.51.100.55 vrf default interface eth4.101
-                ID: 4618932327
-                Remote ID: 3312345688
-                Status: up
-                Uptime: 20 hour(s), 16 minute(s), 19 second(s)
-                Diagnostics: ok
-                Remote diagnostics: ok
-                Local timers:
-                        Receive interval: 300ms
-                        Transmission interval: 300ms
-                        Echo transmission interval: 50ms
-                Remote timers:
-                        Receive interval: 300ms
-                        Transmission interval: 300ms
-                        Echo transmission interval: 0ms
-   :::
-```
-
-## BFD Static Route Monitoring
-
-
-A monitored static route conditions the installation to the RIB on the BFD
-session running state: when BFD session is up the route is installed to RIB,
-but when the BFD session is down it is removed from the RIB.
-
-
-### Configuration
-
-```{cfgcmd} set protocols static route \<subnet\> next-hop \<address\> bfd profile \<profile\>
-
-Configure a static route for \<subnet\> using gateway \<address\>
-and use the gateway address as BFD peer destination address.
-```
-
-```{cfgcmd} set protocols static route \<subnet\> next-hop \<address\> bfd multi-hop source \<address\> profile \<profile\>
-
-Configure a static route for \<subnet\> using gateway \<address\>,
-use source address to indentify the peer when is multi-hop session
-and the gateway address as BFD peer destination address.
-```
-
-```{cfgcmd} set protocols static route6 \<subnet\> next-hop \<address\> bfd profile \<profile\>
-
-Configure a static route for \<subnet\> using gateway \<address\>
-and use the gateway address as BFD peer destination address.
-```
-
-```{cfgcmd} set protocols static route6 \<subnet\> next-hop \<address\> bfd multi-hop source \<address\> profile \<profile\>
-
-Configure a static route for \<subnet\> using gateway \<address\>,
-use source address to indentify the peer when is multi-hop session
-and the gateway address as BFD peer destination address.
-```
-
-(bfd-operational-commands)=
-
-## Operational Commands
-
-```{opcmd} show bfd static routes
-
-Showing BFD monitored static routes
-
-:::{code-block} none
-Showing BFD monitored static routes:
-
-  Next hops:
-    VRF default IPv4 Unicast:
-        10.10.13.3/32 peer 192.168.2.3 (status: installed)
-        172.16.10.3/32 peer 192.168.10.1 (status: uninstalled)
-
-    VRF default IPv4 Multicast:
-
-    VRF default IPv6 Unicast:
-:::
-```
\ No newline at end of file