Refactor "code-block:: console" to "code-block:: none"

11 files changed, 54 insertions, 54 deletions

diff --git a/docs/system/config-management.rst b/docs/system/config-management.rst
index f21562fd..f087cb46 100644
--- a/docs/system/config-management.rst
+++ b/docs/system/config-management.rst
@@ -6,7 +6,7 @@ Config Management
 
 The following changes the number of commit revisions. In the default settings, 20 revisions are stored locally.
 
-.. code-block:: console
+.. code-block:: none
 
   set system config-management commit-revisions 50
 
@@ -14,7 +14,7 @@ The following changes the number of commit revisions. In the default settings, 2
 | If you want to save all config changes to a remote destination. Set the commit-archive location. Every time a commit is successfully the config.boot file will be copied to the defined destinations.
 
 
-.. code-block:: console
+.. code-block:: none
 
   set system config-management commit-archive location 'tftp://10.0.0.2'
 
@@ -22,7 +22,7 @@ The following changes the number of commit revisions. In the default settings, 2
 
 A commit look now like this:
 
-.. code-block:: console
+.. code-block:: none
 
     vyos@vyos-R1# commit
     Archiving config...
diff --git a/docs/system/eventhandler.rst b/docs/system/eventhandler.rst
index 6496c556..a68b3924 100644
--- a/docs/system/eventhandler.rst
+++ b/docs/system/eventhandler.rst
@@ -7,7 +7,7 @@ Event handler allows you to execute scripts when a string that matches a regex a
 
 It uses "feeds" (output of commands, or a named pipes) and "policies" that define what to execute if a regex is matched.
 
-.. code-block:: console
+.. code-block:: none
 
   system
   event-handler
@@ -29,7 +29,7 @@ It uses "feeds" (output of commands, or a named pipes) and "policies" that defin
 
 In this small example a script runs every time a login failed and an interface goes down
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos# show system event-handler
   feed Syslog {
diff --git a/docs/system/flowaccounting.rst b/docs/system/flowaccounting.rst
index 6caa0d3e..9c876001 100644
--- a/docs/system/flowaccounting.rst
+++ b/docs/system/flowaccounting.rst
@@ -30,7 +30,7 @@ In order for flow accounting information to be collected and displayed for an
 interface, the interface must be configured for flow accounting. The following
 example shows how to configure ``eth0`` and ``bond3`` for flow accounting.
 
-.. code-block:: console
+.. code-block:: none
 
   set system flow-accounting interface eth0
   set system flow-accounting interface bond3
@@ -41,7 +41,7 @@ VyOS supports version 5, 9 and 10 (IPFIX - IP Flow Information Export)
 
 NetFlow v5 example:
 
-.. code-block:: console
+.. code-block:: none
 
   set system flow-accounting netflow engine-id 100
   set system flow-accounting netflow version 5
@@ -55,7 +55,7 @@ display captured network traffic information for all configured interfaces.
 
 The following op-mode command shows flow accounting for eth0.
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos:~$ show flow-accounting interface eth0
   flow-accounting for [eth0]
diff --git a/docs/system/host-information.rst b/docs/system/host-information.rst
index b5b16ed0..71209412 100644
--- a/docs/system/host-information.rst
+++ b/docs/system/host-information.rst
@@ -21,7 +21,7 @@ or over the internet.
 
 Set a system host name:
 
-.. code-block:: console
+.. code-block:: none
 
   set system host-name <hostname>
 
@@ -29,19 +29,19 @@ Set a system host name:
 
 Show host name:
 
-.. code-block:: console
+.. code-block:: none
 
   show system host-name
 
 Delete host name:
 
-.. code-block:: console
+.. code-block:: none
 
   delete system host-name <hostname>
 
 Example: Set system hostname to 'RT01':
 
-.. code-block:: console
+.. code-block:: none
 
   set system host-name RT01
   commit
@@ -56,7 +56,7 @@ unique.
 
 Set the system's domain:
 
-.. code-block:: console
+.. code-block:: none
 
   set system domain-name <domain>
 
@@ -64,19 +64,19 @@ Set the system's domain:
 
 Show domain:
 
-.. code-block:: console
+.. code-block:: none
 
   show system domain-name
 
 Remove domain name:
 
-.. code-block:: console
+.. code-block:: none
 
   set system delete domain-name <domain>
 
 Example: Set system domain to example.com:
 
-.. code-block:: console
+.. code-block:: none
 
   set system domain-name example.com
   commit
@@ -90,20 +90,20 @@ How to assign IPs to interfaces is described in chapter
 :ref:`interfaces-addresses`. This section shows how to statically map a system
 IP to its host name for local (meaning on this VyOS instance) DNS resolution:
 
-.. code-block:: console
+.. code-block:: none
 
   set system static-host-mapping host-name <hostname> inet <IP address>
 
 Show static mapping:
 
-.. code-block:: console
+.. code-block:: none
 
   show system static-host-mapping
 
 Example: Create a static mapping between the system's hostname `RT01` and
 IP address `10.20.30.41`:
 
-.. code-block:: console
+.. code-block:: none
 
   set system static-host-mapping host-name RT01 inet 10.20.30.41
   commit
@@ -117,25 +117,25 @@ Aliases
 
 One or more system aliases (static mappings) can be defined:
 
-.. code-block:: console
+.. code-block:: none
 
   set system static-host-mapping host-name <hostname> alias <alias>
 
 Show aliases:
 
-.. code-block:: console
+.. code-block:: none
 
   show system static-mapping
 
 Delete alias:
 
-.. code-block:: console
+.. code-block:: none
 
   delete system static-host-mapping host-name <hostname> alias <alias>
 
 Example: Set alias `router1` for system with hostname `RT01`:
 
-.. code-block:: console
+.. code-block:: none
 
   set system static-host-mapping host-name RT01 alias router1
   commit
@@ -154,19 +154,19 @@ existing configurations are migrated to the new CLI commands.
 
 It is replaced by inserting a static route into the routing table using:
 
-.. code-block:: console
+.. code-block:: none
 
   set protocols static route 0.0.0.0/0 next-hop <gateway ip>
 
 Delete the default route from the system
 
-.. code-block:: console
+.. code-block:: none
 
   delete protocols static route 0.0.0.0/0
 
 Show default route:
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos$ show ip route 0.0.0.0
   Routing entry for 0.0.0.0/0
diff --git a/docs/system/login-users.rst b/docs/system/login-users.rst
index 9b7668da..424d1978 100644
--- a/docs/system/login-users.rst
+++ b/docs/system/login-users.rst
@@ -16,20 +16,20 @@ Local
 
 Create user account `jsmith` and the password `mypassword`.
 
-.. code-block:: console
+.. code-block:: none
 
   set system login user jsmith full-name "Johan Smith"
   set system login user jsmith authentication plaintext-password mypassword
 
 The command:
 
-.. code-block:: console
+.. code-block:: none
 
   show system login
 
 will show the contents of :code:`system login` configuration node:
 
-.. code-block:: console
+.. code-block:: none
 
   user jsmith {
       authentication {
@@ -45,7 +45,7 @@ SSH with Public Keys
 
 The following command will load the public key `dev.pub` for user `jsmith`
 
-.. code-block:: console
+.. code-block:: none
 
   loadkey jsmith dev.pub
 
@@ -53,7 +53,7 @@ The following command will load the public key `dev.pub` for user `jsmith`
    first. As an alternative you can also load the SSH public key directly
    from a remote system:
 
-.. code-block:: console
+.. code-block:: none
 
   loadkey jsmith scp://devuser@dev001.vyos.net/home/devuser/.ssh/dev.pub
 
@@ -61,7 +61,7 @@ In addition SSH public keys can be fully added using the CLI. Each key can be
 given a unique identifier, `calypso` is used oin the example below to id an SSH
 key.
 
-.. code-block:: console
+.. code-block:: none
 
   set system login user jsmith authentication public-keys callisto key 'AAAABo..Q=='
   set system login user jsmith authentication public-keys callisto type 'ssh-rsa'
@@ -75,7 +75,7 @@ The following command sets up two servers for RADIUS authentication, one with a
 discrete timeout of `5` seconds and a discrete port of `1812` and the other using
 a default timeout and port.
 
-.. code-block:: console
+.. code-block:: none
 
   set system login radius server 192.168.1.2 secret 's3cr3t0815'
   set system login radius server 192.168.1.2 timeout '5'
@@ -84,7 +84,7 @@ a default timeout and port.
 
 This configuration results in:
 
-.. code-block:: console
+.. code-block:: none
 
   show system login
    radius {
@@ -111,7 +111,7 @@ not set incoming connections to the RADIUS server will use the nearest interface
 address pointing towards the RADIUS server - making it error prone on e.g. OSPF
 networks when a link fails.
 
-.. code-block:: console
+.. code-block:: none
 
   set system login radius source-address 192.168.1.254
 
@@ -120,7 +120,7 @@ Login Banner
 
 You are able to set post-login or pre-login messages with the following lines:
 
-.. code-block:: console
+.. code-block:: none
 
   set system login banner pre-login "UNAUTHORIZED USE OF THIS SYSTEM IS PROHIBITED\n"
   set system login banner post-login "Welcome to VyOS"
diff --git a/docs/system/ntp.rst b/docs/system/ntp.rst
index d9598a6f..95ff0692 100644
--- a/docs/system/ntp.rst
+++ b/docs/system/ntp.rst
@@ -5,7 +5,7 @@ NTP
 
 there are 3 default NTP server set. You are able to change them.
 
-.. code-block:: console
+.. code-block:: none
 
   set system ntp server 0.pool.ntp.org
   set system ntp server 1.pool.ntp.org
@@ -13,7 +13,7 @@ there are 3 default NTP server set. You are able to change them.
 
 To set up VyOS as an NTP responder, you must specify the listen address and optionally the permitted clients.
 
-.. code-block:: console
+.. code-block:: none
 
   set system ntp listen-address 192.168.199.1
   set system ntp allow-clients address 192.168.199.0/24
diff --git a/docs/system/proxy.rst b/docs/system/proxy.rst
index 421cd141..dc8ed555 100644
--- a/docs/system/proxy.rst
+++ b/docs/system/proxy.rst
@@ -8,7 +8,7 @@ The ``system proxy`` option sets the configuration for a proxy, and if necessary
 
 This example sets a proxy for all connections initiated by VyOS, including HTTP, HTTPS, and FTP (anonymous ftp).
 
-.. code-block:: console
+.. code-block:: none
 
   set system proxy url http://10.100.100.1
   set system proxy port 8080
@@ -19,7 +19,7 @@ This example sets a proxy for all connections initiated by VyOS, including HTTP,
 
 That enables the update of a system image if the VyOS system operates behind a proxy.
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos:~$ add system image https://downloads.vyos.io/rolling/current/amd64/vyos-rolling-latest.iso
   Trying to fetch ISO file from https://downloads.vyos.io/rolling/current/amd64/vyos-rolling-latest.iso
diff --git a/docs/system/serialconsole.rst b/docs/system/serialconsole.rst
index dbb90b7a..730c9da1 100644
--- a/docs/system/serialconsole.rst
+++ b/docs/system/serialconsole.rst
@@ -8,7 +8,7 @@ Serial console
 Configuring Console
 -------------------
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos# set system console
   Possible completions:
diff --git a/docs/system/syslog.rst b/docs/system/syslog.rst
index 29a9aec5..c9dc8a1c 100644
--- a/docs/system/syslog.rst
+++ b/docs/system/syslog.rst
@@ -16,14 +16,14 @@ Logging to serial console
 
 The below would log all messages to :code:`/dev/console`.
 
-.. code-block:: console
+.. code-block:: none
 
   set system syslog console facility all level all
 
 Use the **[tab]** function to display all facilities and levels which can
 be configured.
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos# set system syslog console facility <TAB>
   Possible completions:
@@ -70,7 +70,7 @@ Logging to a custom file
 Logging to a custom file, rotation size and the number of rotate files left
 on the system can be configured.
 
-.. code-block:: console
+.. code-block:: none
 
   set system syslog file <FILENAME> facility <FACILITY>  level <LEVEL>
   set system syslog file <FILENAME> archive file <NUMBER OF FILES>
@@ -88,7 +88,7 @@ using either TCP or UDP. The default is sending the messages via UDP.
 
 **UDP**
 
-.. code-block:: console
+.. code-block:: none
 
   set system syslog host 10.1.1.1 facility all level all
   <optional>
@@ -97,7 +97,7 @@ using either TCP or UDP. The default is sending the messages via UDP.
 
 **TCP**
 
-.. code-block:: console
+.. code-block:: none
 
   set system syslog host 10.1.1.2 facility all level all
   set system syslog host 10.1.1.2 facility all protocol tcp
@@ -109,7 +109,7 @@ If logging to a local useraccount is configured, all defined log messages are
 display on the console if the local user is logged in, if the user is not
 logged in, no messages are being displayed.
 
-.. code-block:: console
+.. code-block:: none
 
   set system syslog user <LOCAL_USERNAME> facility <FACILITY> level <LEVEL>
 
@@ -118,7 +118,7 @@ Show logs
 
 Display log files on the console
 
-.. code-block:: console
+.. code-block:: none
 
   vyos@vyos:~$ show log
   Possible completions:
@@ -149,7 +149,7 @@ Show contents of a log file in an image
 
 Log messages from a specified image can be displayed on the console:
 
-.. code-block:: console
+.. code-block:: none
 
   $ show log image <image name>
   $ show log image <image name> [all | authorization | directory | file <file name> | tail <lines>]
diff --git a/docs/system/task-scheduler.rst b/docs/system/task-scheduler.rst
index 20a8640c..7fe49988 100644
--- a/docs/system/task-scheduler.rst
+++ b/docs/system/task-scheduler.rst
@@ -7,7 +7,7 @@ Task scheduler
 | Task scheduler — allows scheduled task execution. Note that scripts excecuted this way are executed as root user - this may be dangerous.
 | Together with :ref:`commandscripting` this can be used for automating configuration.
 
-.. code-block:: console
+.. code-block:: none
 
   system
       task-scheduler
@@ -24,7 +24,7 @@ Interval
 
 You are able to set the time as an time interval.
 
-.. code-block:: console
+.. code-block:: none
 
   set system task-scheduler task <name> interval <value><suffix>
 
@@ -38,14 +38,14 @@ If suffix is omitted, minutes are implied.
 
 Or set the execution time in common cron time.
 
-.. code-block:: console
+.. code-block:: none
 
   set system task-scheduler task TEST crontab-spec "* * * 1 *"
 
 Example
 *******
 
-.. code-block:: console
+.. code-block:: none
 
   system
       task-scheduler
diff --git a/docs/system/time-zone.rst b/docs/system/time-zone.rst
index 182829db..9e1690e8 100644
--- a/docs/system/time-zone.rst
+++ b/docs/system/time-zone.rst
@@ -5,7 +5,7 @@ Time Zone
 
 To set the system time zone type:
 
-.. code-block:: console
+.. code-block:: none
 
   [edit]
   vyos@vyos# set system time-zone [time-zone]
\ No newline at end of file