1 files changed, 124 insertions, 0 deletions
diff --git a/docs/_rst_legacy/configuration/service/rst-https.rst b/docs/_rst_legacy/configuration/service/rst-https.rst
new file mode 100644
index 00000000..e72e8e8b
--- /dev/null
+++ b/docs/_rst_legacy/configuration/service/rst-https.rst
@@ -0,0 +1,124 @@
+.. _http-api:
+
+########
+HTTP API
+########
+
+VyOS provide an HTTP API. You can use it to execute op-mode commands,
+update VyOS, set or delete config.
+
+Please take a look at the :ref:`vyosapi` page for an detailed how-to.
+
+*************
+Configuration
+*************
+
+.. cfgcmd:: set service https allow-client address <address>
+
+   Only allow certain IP addresses or prefixes to access the https
+   webserver.
+
+.. cfgcmd:: set service https certificates ca-certificate <name>
+
+   Use CA certificate from PKI subsystem
+
+.. cfgcmd:: set service https certificates certificate <name>
+
+   Use certificate from PKI subsystem
+
+.. cfgcmd:: set service https certificates dh-params <name>
+
+   Use :abbr:`DH (Diffie–Hellman)` parameters from PKI subsystem.
+   Must be at least 2048 bits in length.
+
+.. cfgcmd:: set service https listen-address <address>
+
+   Webserver should only listen on specified IP address
+
+.. cfgcmd:: set service https port <number>
+
+   Webserver should listen on specified port.
+
+   Default: 443
+
+.. cfgcmd:: set service https enable-http-redirect
+
+   Enable automatic redirect from http to https.
+
+.. cfgcmd:: set service https tls-version <1.2 | 1.3>
+
+   Select TLS version used.
+
+   This defaults to both 1.2 and 1.3.
+
+.. cfgcmd:: set service https vrf <name>
+
+   Start Webserver in given VRF.
+
+.. cfgcmd:: set service https request-body-size-limit <size>
+
+   Set the maximum request body size in megabytes. Default is 1MB.
+
+API
+===
+
+.. cfgcmd:: set service https api keys id <name> key <apikey>
+
+   Set a named api key. Every key has the same, full permissions
+   on the system.
+
+REST
+====
+
+.. cfgcmd:: set service https api rest
+
+   Enable REST API
+
+.. cfgcmd:: set service https api rest debug
+
+   To enable debug messages. Available via :opcmd:`show log` or
+   :opcmd:`monitor log`
+
+.. cfgcmd:: set service https api rest strict
+
+   Enforce strict path checking.
+
+GraphQL
+=======
+
+.. cfgcmd:: set service https api graphql introspection
+
+   Enable GraphQL Schema introspection.
+
+.. note:: Do not leave introspection enabled in production, it is a security risk.
+
+.. cfgcmd:: set service https api graphql authentication type <key | token>
+
+   Set the authentication type for GraphQL, default option is key. Available options are:
+
+   * ``key`` use API keys configured in ``service https api keys``
+
+   * ``token`` use JWT tokens.
+
+.. cfgcmd:: set service https api graphql authentication expiration
+
+   Set the lifetime for JWT tokens in seconds. Default is 3600 seconds.
+
+.. cfgcmd:: set service https api graphql authentication secret-length
+
+   Set the byte length of the JWT secret. Default is 32.
+
+.. cfgcmd:: set service https api graphql cors allow-origin <origin>
+
+   Allow cross-origin requests from `<origin>`.
+
+*********************
+Example Configuration
+*********************
+
+Setting REST API and an API-KEY is the minimal configuration to get a working API Endpoint.
+
+.. code-block:: none
+
+   set service https api keys id MY-HTTPS-API-ID key MY-HTTPS-API-PLAINTEXT-KEY
+   set service https api rest