diff options
Diffstat (limited to 'docs/configexamples/ipsec-cisco-policy-based.md')
| -rw-r--r-- | docs/configexamples/ipsec-cisco-policy-based.md | 363 |
1 files changed, 363 insertions, 0 deletions
diff --git a/docs/configexamples/ipsec-cisco-policy-based.md b/docs/configexamples/ipsec-cisco-policy-based.md new file mode 100644 index 00000000..7a31601d --- /dev/null +++ b/docs/configexamples/ipsec-cisco-policy-based.md @@ -0,0 +1,363 @@ +--- +lastproofread: '2025-06-26' +--- + +(examples-ipsec-cisco-policy-based)= + +# Policy-based Site-to-Site VPN IPsec between VyOS and Cisco + +This document is to describe a basic setup using policy-based +site-to-site VPN IPsec. In this example we use VyOS 1.5 and +Cisco IOS. Cisco initiates IPsec connection only if interesting +traffic present. For stable work we recommend configuring an +initiator role on VyOS side. + +## Network Topology + +```{image} /_static/images/cisco-vpn-ipsec.webp +:align: center +:alt: Network Topology Diagram +``` + + +## Prerequirements + +**VyOS:** + +```{eval-rst} ++---------+----------------+ +| WAN IP | 10.0.1.2/30 | ++---------+----------------+ +| LAN1 IP | 192.168.0.1/24 | ++---------+----------------+ +| LAN2 IP | 192.168.1.1/24 | ++---------+----------------+ +``` + +**Cisco:** + +```{eval-rst} ++---------+-----------------+ +| WAN IP | 10.0.2.2/30 | ++---------+-----------------+ +| LAN1 IP | 192.168.10.1/24 | ++---------+-----------------+ +| LAN2 IP | 192.168.11.1/24 | ++---------+-----------------+ +``` + +**IKE parameters:** + +```{eval-rst} ++-------------------+---------+ +| Encryption | AES-256 | ++-------------------+---------+ +| HASH | SHA-1 | ++-------------------+---------+ +| Diff-Helman Group | 14 | ++-------------------+---------+ +| Life-Time | 28800 | ++-------------------+---------+ +| IKE Version | 2 | ++-------------------+---------+ +``` + +**IPsec parameters:** + +```{eval-rst} ++------------+---------+ +| Encryption | AES-256 | ++------------+---------+ +| HASH | SHA-256 | ++------------+---------+ +| Life-Time | 3600 | ++------------+---------+ +| PFS | disable | ++------------+---------+ +``` + +```{eval-rst} +**Traffic Selectors** + 192.168.0.0/24 <==> 192.168.10.0/24 + + 192.168.1.0/24 <==> 192.168.11.0/24 +``` + +**Hosts configuration** + +```{eval-rst} ++--------+--------------+ +| PC1 IP | 192.168.0.2 | ++--------+--------------+ +| PC2 IP | 192.168.1.2 | ++--------+--------------+ +| PC3 IP | 192.168.10.2 | ++--------+--------------+ +| PC4 IP | 192.168.11.2 | ++--------+--------------+ +``` + +## Configuration + +:::{note} +Pfs is disabled in Cisco by default. +::: + +### VyOS + +```none +set interfaces ethernet eth0 address '10.0.1.2/30' +set interfaces ethernet eth1 address '192.168.0.1/24' +set interfaces ethernet eth2 address '192.168.1.1/24' +set protocols static route 0.0.0.0/0 next-hop 10.0.1.1 +set vpn ipsec authentication psk AUTH-PSK id '10.0.1.2' +set vpn ipsec authentication psk AUTH-PSK id '10.0.2.2' +set vpn ipsec authentication psk AUTH-PSK secret 'dGVzdA==' +set vpn ipsec authentication psk AUTH-PSK secret-type 'base64' +set vpn ipsec esp-group ESP-GROUP lifetime '3600' +set vpn ipsec esp-group ESP-GROUP pfs 'disable' +set vpn ipsec esp-group ESP-GROUP proposal 10 encryption 'aes256' +set vpn ipsec esp-group ESP-GROUP proposal 10 hash 'sha256' +set vpn ipsec ike-group IKE-GROUP close-action 'start' +set vpn ipsec ike-group IKE-GROUP dead-peer-detection action 'restart' +set vpn ipsec ike-group IKE-GROUP dead-peer-detection interval '10' +set vpn ipsec ike-group IKE-GROUP key-exchange 'ikev2' +set vpn ipsec ike-group IKE-GROUP lifetime '28800' +set vpn ipsec ike-group IKE-GROUP proposal 10 dh-group '14' +set vpn ipsec ike-group IKE-GROUP proposal 10 encryption 'aes256' +set vpn ipsec ike-group IKE-GROUP proposal 10 hash 'sha1' +set vpn ipsec site-to-site peer CISCO authentication local-id '10.0.1.2' +set vpn ipsec site-to-site peer CISCO authentication mode 'pre-shared-secret' +set vpn ipsec site-to-site peer CISCO authentication remote-id '10.0.2.2' +set vpn ipsec site-to-site peer CISCO connection-type 'initiate' +set vpn ipsec site-to-site peer CISCO default-esp-group 'ESP-GROUP' +set vpn ipsec site-to-site peer CISCO ike-group 'IKE-GROUP' +set vpn ipsec site-to-site peer CISCO local-address '10.0.1.2' +set vpn ipsec site-to-site peer CISCO remote-address '10.0.2.2' +set vpn ipsec site-to-site peer CISCO tunnel 1 local prefix '192.168.0.0/24' +set vpn ipsec site-to-site peer CISCO tunnel 1 remote prefix '192.168.10.0/24' +set vpn ipsec site-to-site peer CISCO tunnel 2 local prefix '192.168.1.0/24' +set vpn ipsec site-to-site peer CISCO tunnel 2 remote prefix '192.168.11.0/24' +``` + + +### Cisco + +```none +crypto ikev2 proposal aes-cbc-256-proposal + encryption aes-cbc-256 + integrity sha1 + group 14 +! +crypto ikev2 policy policy1 + match address local 10.0.2.2 + proposal aes-cbc-256-proposal +! +crypto ikev2 keyring keys + peer VyOS + address 10.0.1.2 + pre-shared-key local test + pre-shared-key remote test +! +crypto ikev2 profile IKEv2-profile + match identity remote address 10.0.1.2 255.255.255.255 + authentication remote pre-share + authentication local pre-share + keyring local keys + lifetime 28800 +! +crypto ipsec transform-set TS esp-aes 256 esp-sha256-hmac + mode tunnel +! +crypto map IPSEC-map 10 ipsec-isakmp + set peer 10.0.1.2 + set security-association lifetime seconds 3600 + set transform-set TS + set ikev2-profile IKEv2-profile + match address cryptoacl +! +interface GigabitEthernet0/0 + ip address 10.0.2.2 255.255.255.252 + crypto map IPSEC-map +! +interface GigabitEthernet0/1 + ip address 192.168.10.1 255.255.255.0 +! +interface GigabitEthernet0/2 + ip address 192.168.11.1 255.255.255.0 +! +ip route 0.0.0.0 0.0.0.0 10.0.2.1 +! +ip access-list extended cryptoacl + permit ip 192.168.10.0 0.0.0.255 192.168.0.0 0.0.0.255 + permit ip 192.168.11.0 0.0.0.255 192.168.1.0 0.0.0.255 +``` + + +## Monitoring + +### Monitoring on VyOS side + +IKE SAs: + +```none +vyos@vyos:~$ show vpn ike sa +Peer ID / IP Local ID / IP +------------ ------------- +10.0.2.2 10.0.2.2 10.0.1.2 10.0.1.2 + + State IKEVer Encrypt Hash D-H Group NAT-T A-Time L-Time + ----- ------ ------- ---- --------- ----- ------ ------ + up IKEv2 AES_CBC_256 HMAC_SHA1_96 MODP_2048 no 304 26528 +``` + +IPsec SAs: + +```none +vyos@vyos:~$ show vpn ipsec sa +Connection State Uptime Bytes In/Out Packets In/Out Remote address Remote ID Proposal +-------------- ------- -------- -------------- ---------------- ---------------- ----------- ----------------------------- +CISCO-tunnel-1 up 6m6s 0B/0B 0/0 10.0.2.2 10.0.2.2 AES_CBC_256/HMAC_SHA2_256_128 +CISCO-tunnel-2 up 6m6s 0B/0B 0/0 10.0.2.2 10.0.2.2 AES_CBC_256/HMAC_SHA2_256_128 +``` + + +### Monitoring on Cisco side + +IKE SAs: + +```none +Cisco#show crypto ikev2 sa + IPv4 Crypto IKEv2 SA + +Tunnel-id Local Remote fvrf/ivrf Status +1 10.0.2.2/4500 10.0.1.2/4500 none/none READY + Encr: AES-CBC, keysize: 256, PRF: SHA1, Hash: SHA96, DH Grp:14, Auth sign: PSK, Auth verify: PSK + Life/Active Time: 28800/471 sec + + IPv6 Crypto IKEv2 SA +``` + +IPsec SAs: + +```none + Cisco#show crypto ipsec sa + +interface: GigabitEthernet0/0 + Crypto map tag: IPSEC-map, local addr 10.0.2.2 + + protected vrf: (none) + local ident (addr/mask/prot/port): (192.168.11.0/255.255.255.0/0/0) + remote ident (addr/mask/prot/port): (192.168.1.0/255.255.255.0/0/0) + current_peer 10.0.1.2 port 4500 + PERMIT, flags={origin_is_acl,} + #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 + #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0 + #pkts compressed: 0, #pkts decompressed: 0 + #pkts not compressed: 0, #pkts compr. failed: 0 + #pkts not decompressed: 0, #pkts decompress failed: 0 + #send errors 0, #recv errors 0 + + local crypto endpt.: 10.0.2.2, remote crypto endpt.: 10.0.1.2 + plaintext mtu 1438, path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0 + current outbound spi: 0xC81F83DA(3357508570) + PFS (Y/N): N, DH group: none + + inbound esp sas: + spi: 0x8C63C51E(2355348766) + transform: esp-256-aes esp-sha256-hmac , + in use settings ={Tunnel, } + conn id: 23, flow_id: SW:23, sibling_flags 80000040, crypto map: IPSEC-map + sa timing: remaining key lifetime (k/sec): (4231729/3585) + IV size: 16 bytes + replay detection support: Y + Status: ACTIVE(ACTIVE) + + inbound ah sas: + + inbound pcp sas: + + outbound esp sas: + spi: 0xC81F83DA(3357508570) + transform: esp-256-aes esp-sha256-hmac , + in use settings ={Tunnel, } + conn id: 24, flow_id: SW:24, sibling_flags 80000040, crypto map: IPSEC-map + sa timing: remaining key lifetime (k/sec): (4231729/3585) + IV size: 16 bytes + replay detection support: Y + Status: ACTIVE(ACTIVE) + + outbound ah sas: + + outbound pcp sas: + + protected vrf: (none) + local ident (addr/mask/prot/port): (192.168.10.0/255.255.255.0/0/0) + remote ident (addr/mask/prot/port): (192.168.0.0/255.255.255.0/0/0) + current_peer 10.0.1.2 port 4500 + PERMIT, flags={origin_is_acl,} + #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0 + #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0 + #pkts compressed: 0, #pkts decompressed: 0 + #pkts not compressed: 0, #pkts compr. failed: 0 + #pkts not decompressed: 0, #pkts decompress failed: 0 + #send errors 0, #recv errors 0 + + local crypto endpt.: 10.0.2.2, remote crypto endpt.: 10.0.1.2 + plaintext mtu 1438, path mtu 1500, ip mtu 1500, ip mtu idb GigabitEthernet0/0 + current outbound spi: 0xC40C7A20(3289152032) + PFS (Y/N): N, DH group: none + + inbound esp sas: + spi: 0x2948B6CB(692631243) + transform: esp-256-aes esp-sha256-hmac , + in use settings ={Tunnel, } + conn id: 21, flow_id: SW:21, sibling_flags 80000040, crypto map: IPSEC-map + sa timing: remaining key lifetime (k/sec): (4194891/3581) + IV size: 16 bytes + replay detection support: Y + Status: ACTIVE(ACTIVE) + + inbound ah sas: + + inbound pcp sas: + + outbound esp sas: + spi: 0xC40C7A20(3289152032) + transform: esp-256-aes esp-sha256-hmac , + in use settings ={Tunnel, } + conn id: 22, flow_id: SW:22, sibling_flags 80000040, crypto map: IPSEC-map + sa timing: remaining key lifetime (k/sec): (4194891/3581) + IV size: 16 bytes + replay detection support: Y + Status: ACTIVE(ACTIVE) + + outbound ah sas: + + outbound pcp sas: +``` + + +### Checking Connectivity + +ICMP packets from PC1 to PC3. + +```none +PC1> ping 192.168.10.2 + +84 bytes from 192.168.10.2 icmp_seq=1 ttl=62 time=8.479 ms +84 bytes from 192.168.10.2 icmp_seq=2 ttl=62 time=3.344 ms +84 bytes from 192.168.10.2 icmp_seq=3 ttl=62 time=3.139 ms +84 bytes from 192.168.10.2 icmp_seq=4 ttl=62 time=3.176 ms +84 bytes from 192.168.10.2 icmp_seq=5 ttl=62 time=3.978 ms +``` + +ICMP packets from PC2 to PC4. + +```none +PC2> ping 192.168.11.2 + +84 bytes from 192.168.11.2 icmp_seq=1 ttl=62 time=9.687 ms +84 bytes from 192.168.11.2 icmp_seq=2 ttl=62 time=3.286 ms +84 bytes from 192.168.11.2 icmp_seq=3 ttl=62 time=2.972 ms +``` |