diff options
Diffstat (limited to 'docs/configuration/nat')
| -rw-r--r-- | docs/configuration/nat/nat64.rst | 4 | ||||
| -rw-r--r-- | docs/configuration/nat/nat66.rst | 12 |
2 files changed, 14 insertions, 2 deletions
diff --git a/docs/configuration/nat/nat64.rst b/docs/configuration/nat/nat64.rst index e8a3a0e6..04ba56f4 100644 --- a/docs/configuration/nat/nat64.rst +++ b/docs/configuration/nat/nat64.rst @@ -69,6 +69,8 @@ NAT64 client configuration: Test from the IPv6 only client: +.. stop_vyoslinter + .. code-block:: none vyos@r1:~$ ping 64:ff9b::192.0.2.1 count 2 @@ -79,3 +81,5 @@ Test from the IPv6 only client: --- 64:ff9b::192.0.2.1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1023ms rtt min/avg/max/mdev = 0.351/0.362/0.373/0.011 ms + +.. start_vyoslinter diff --git a/docs/configuration/nat/nat66.rst b/docs/configuration/nat/nat66.rst index 31f6c002..aecce524 100644 --- a/docs/configuration/nat/nat66.rst +++ b/docs/configuration/nat/nat66.rst @@ -4,6 +4,9 @@ NAT66(NPTv6) ############ +.. TODO:: Convert raw command blocks in this file to cfgcmd/opcmd + directives for command coverage tracking. + :abbr:`NPTv6 (IPv6-to-IPv6 Network Prefix Translation)` is an address translation technology based on IPv6 networks, used to convert an IPv6 address prefix in an IPv6 message into another IPv6 address prefix. @@ -151,14 +154,17 @@ R2: set service router-advert interface br1 prefix ::/0 -Use the following topology to translate internal user local addresses (``fc::/7``) -to DHCPv6-PD provided prefixes from an ISP connected to a VyOS HA pair. +Use the following topology to translate internal user local addresses +(``fc::/7``) to DHCPv6-PD provided prefixes from an ISP connected to +a VyOS HA pair. .. figure:: /_static/images/vyos_1_5_nat66_dhcpv6_wdummy.* :alt: VyOS NAT66 DHCPv6 using a dummy interface Configure both routers (a and b) for DHCPv6-PD via dummy interface: +.. stop_vyoslinter + .. code-block:: none set interfaces dummy dum1 description 'DHCPv6-PD NPT dummy' @@ -169,6 +175,8 @@ Configure both routers (a and b) for DHCPv6-PD via dummy interface: set interfaces bonding bond0 vif 20 dhcpv6-options rapid-commit commit +.. start_vyoslinter + Get the DHCPv6-PD prefixes from both routers: .. code-block:: none |