diff options
Diffstat (limited to 'docs/configuration/policy/md-examples.md')
| -rw-r--r-- | docs/configuration/policy/md-examples.md | 205 |
1 files changed, 0 insertions, 205 deletions
diff --git a/docs/configuration/policy/md-examples.md b/docs/configuration/policy/md-examples.md deleted file mode 100644 index 2b5d54d2..00000000 --- a/docs/configuration/policy/md-examples.md +++ /dev/null @@ -1,205 +0,0 @@ -# BGP Example - -**Policy definition:** - -```none -# Create policy -set policy route-map setmet rule 2 action 'permit' -set policy route-map setmet rule 2 set as-path prepend '2 2 2' - -# Apply policy to BGP -set protocols bgp system-as 1 -set protocols bgp neighbor 203.0.113.2 address-family ipv4-unicast route-map import 'setmet' -set protocols bgp neighbor 203.0.113.2 address-family ipv4-unicast soft-reconfiguration 'inbound' -``` - -Using 'soft-reconfiguration' we get the policy update without bouncing the -neighbor. - -**Routes learned before routing policy applied:** - -```none -vyos@vos1:~$ show ip bgp -BGP table version is 0, local router ID is 192.168.56.101 -Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, - r RIB-failure, S Stale, R Removed -Origin codes: i - IGP, e - EGP, ? - incomplete - - Network Next Hop Metric LocPrf Weight Path -*> 198.51.100.3/32 203.0.113.2 1 0 2 i < Path - -Total number of prefixes 1 -``` - -**Routes learned after routing policy applied:** - -```none -vyos@vos1:~$ show ip bgp -BGP table version is 0, local router ID is 192.168.56.101 -Status codes: s suppressed, d damped, h history, * valid, > best, i - internal, - r RIB-failure, S Stale, R Removed -Origin codes: i - IGP, e - EGP, ? - incomplete - - Network Next Hop Metric LocPrf Weight Path -*> 198.51.100.3/32 203.0.113.2 1 0 2 2 2 2 i - -Total number of prefixes 1 -vyos@vos1:~$ -``` - -You now see the longer AS path. - -# Transparent Proxy - -The following example will show how VyOS can be used to redirect web -traffic to an external transparent proxy: - -```none -set policy route FILTER-WEB rule 1000 destination port 80 -set policy route FILTER-WEB rule 1000 protocol tcp -set policy route FILTER-WEB rule 1000 set table 100 -``` - -This creates a route policy called FILTER-WEB with one rule to set the -routing table for matching traffic (TCP port 80) to table ID 100 -instead of the default routing table. - -To create routing table 100 and add a new default gateway to be used by -traffic matching our route policy: - -```none -set protocols static table 100 route 0.0.0.0/0 next-hop 10.255.0.2 -``` - -This can be confirmed using the `show ip route table 100` operational -command. - -Finally, to apply the policy route to ingress traffic on our LAN -interface, we use: - -```none -set policy route FILTER-WEB interface eth1 -``` - - -# Multiple Uplinks - -VyOS Policy-Based Routing (PBR) works by matching source IP address -ranges and forwarding the traffic using different routing tables. - -Routing tables that will be used in this example are: - -- `table 10` Routing table used for VLAN 10 (192.168.188.0/24) -- `table 11` Routing table used for VLAN 11 (192.168.189.0/24) -- `main` Routing table used by VyOS and other interfaces not - participating in PBR - -:::{figure} /_static/images/pbr_example_1.webp -:alt: PBR multiple uplinks -:scale: 80 % - -Policy-Based Routing with multiple ISP uplinks -(source ./draw.io/pbr_example_1.drawio) -::: - -Add default routes for routing `table 10` and `table 11` - -```none -set protocols static table 10 route 0.0.0.0/0 next-hop 192.0.2.1 -set protocols static table 11 route 0.0.0.0/0 next-hop 192.0.2.2 -``` - -Add policy route matching VLAN source addresses - -```none -set policy route PBR rule 20 set table '10' -set policy route PBR rule 20 description 'Route VLAN10 traffic to table 10' -set policy route PBR rule 20 source address '192.168.188.0/24' - -set policy route PBR rule 30 set table '11' -set policy route PBR rule 30 description 'Route VLAN11 traffic to table 11' -set policy route PBR rule 30 source address '192.168.189.0/24' -``` - -Apply routing policy to **inbound** direction of out VLAN interfaces - -```none -set policy route 'PBR' interface eth0.10 -set policy route 'PBR' interface eth0.11 -``` - -**OPTIONAL:** Exclude Inter-VLAN traffic (between VLAN10 and VLAN11) -from PBR - -```none -set firewall group network-group VLANS-GR description 'VLANs networks' -set firewall group network-group VLANS-GR network '192.168.188.0/24' -set firewall group network-group VLANS-GR network '192.168.189.0/24' - -set policy route PBR rule 10 description 'VLAN10 <-> VLAN11 shortcut' -set policy route PBR rule 10 destination group network-group 'VLANS-GR' -set policy route PBR rule 10 set table 'main' -``` - -These commands allow the VLAN10 and VLAN11 hosts to communicate with -each other using the main routing table. - -## Local route - -The following example allows VyOS to use {abbr}`PBR (Policy-Based Routing)` -for traffic, which originated from the router itself. That solution for multiple -ISP's and VyOS router will respond from the same interface that the packet was -received. Also, it used, if we want that one VPN tunnel to be through one -provider, and the second through another. - -- `203.0.113.254` IP addreess on VyOS eth1 from ISP1 -- `192.168.2.254` IP addreess on VyOS eth2 from ISP2 -- `table 10` Routing table used for ISP1 -- `table 11` Routing table used for ISP2 - -```none -set policy local-route rule 101 set table '10' -set policy local-route rule 101 source address '203.0.113.254' -set policy local-route rule 102 set table '11' -set policy local-route rule 102 source address '192.0.2.254' -set protocols static table 10 route 0.0.0.0/0 next-hop '203.0.113.1' -set protocols static table 11 route 0.0.0.0/0 next-hop '192.0.2.2' -``` - -Add multiple source IP in one rule with same priority - -```none -set policy local-route rule 101 set table '10' -set policy local-route rule 101 source address '203.0.113.254' -set policy local-route rule 101 source address '203.0.113.253' -set policy local-route rule 101 source address '198.51.100.0/24' -``` - - -# Clamp MSS for a specific IP - -This example shows how to target an MSS clamp (in our example to 1360 bytes) -to a specific destination IP. - -```none -set policy route IP-MSS-CLAMP rule 10 description 'Clamp TCP session MSS to 1360 for 198.51.100.30' -set policy route IP-MSS-CLAMP rule 10 destination address '198.51.100.30/32' -set policy route IP-MSS-CLAMP rule 10 protocol 'tcp' -set policy route IP-MSS-CLAMP rule 10 set tcp-mss '1360' -set policy route IP-MSS-CLAMP rule 10 tcp flags 'SYN' -``` - -To apply this policy to the correct interface, configure it on the -interface the inbound local host will send through to reach our -destined target host (in our example eth1). - -```none -set policy route IP-MSS-CLAMP interface eth1 -``` - -You can view that the policy is being correctly (or incorrectly) utilised -with the following command: - -```none -show policy route statistics -``` |