summaryrefslogtreecommitdiff
path: root/docs/configuration/protocols/md-arp.md
diff options
context:
space:
mode:
Diffstat (limited to 'docs/configuration/protocols/md-arp.md')
-rw-r--r--docs/configuration/protocols/md-arp.md72
1 files changed, 0 insertions, 72 deletions
diff --git a/docs/configuration/protocols/md-arp.md b/docs/configuration/protocols/md-arp.md
deleted file mode 100644
index 7d9bf4f9..00000000
--- a/docs/configuration/protocols/md-arp.md
+++ /dev/null
@@ -1,72 +0,0 @@
-```{eval-rst}
-.. meta::
- :description: The Address Resolution Protocol (ARP) resolves
- network-layer addresses to link-layer MAC addresses.
- :keywords: arp, network, protocol, mac, address, ipv4, static
-```
-
-(routing_static_arp)=
-
-# ARP
-
-The {abbr}`ARP (Address Resolution Protocol)` resolves IPv4 network layer addresses
-to link layer MAC addresses.
-addresses. This mapping is essential for communication within the Internet
-Protocol suite. ARP was standardized in 1982 by {rfc}`826` (STD 37).
-
-:::{note}
-In Internet Protocol version 6 (IPv6) networks, address resolution is
-performed by the Neighbor Discovery Protocol (NDP).
-:::
-
-Use the following commands to configure or view ARP table entries.
-
-## Configuration
-
-```{eval-rst}
-.. cfgcmd:: set protocols static arp interface <interface> address <host> mac <mac>
-
- **Configure a static ARP entry on the specified interface.**
-
- This creates a permanent mapping between an IP address and a MAC address
- on the specified interface.
-
- Example:
-
- .. code-block:: none
-
- set protocols static arp interface eth0 address 192.0.2.1 mac 01:23:45:67:89:01
-```
-
-## Operation
-
-```{eval-rst}
-.. opcmd:: show protocols static arp
-
- Show all ARP table entries across all interfaces.
-
- .. code-block:: none
-
- vyos@vyos:~$ show protocols static arp
- Address HWtype HWaddress Flags Mask Iface
- 10.1.1.1 ether 00:53:00:de:23:2e C eth1
- 10.1.1.100 ether 00:53:00:de:23:aa CM eth1
-```
-
-```{eval-rst}
-.. opcmd:: show protocols static arp interface <interface>
-
- Show all ARP table entries for the specific interface.
-
- Example for ``eth1``:
-
- .. code-block:: none
-
- vyos@vyos:~$ show protocols static arp interface eth1
- Address HWtype HWaddress Flags Mask Iface
- 10.1.1.1 ether 00:53:00:de:23:2e C eth1
- 10.1.1.100 ether 00:53:00:de:23:aa CM eth1
-```
-
-[arp]: https://en.wikipedia.org/wiki/Address_Resolution_Protocol
-