diff options
Diffstat (limited to 'docs/configuration/protocols/mpls.rst')
-rw-r--r-- | docs/configuration/protocols/mpls.rst | 12 |
1 files changed, 8 insertions, 4 deletions
diff --git a/docs/configuration/protocols/mpls.rst b/docs/configuration/protocols/mpls.rst index 312a0df2..d1d0cd87 100644 --- a/docs/configuration/protocols/mpls.rst +++ b/docs/configuration/protocols/mpls.rst @@ -67,10 +67,13 @@ change to work. Configuration Options ===================== +.. cfgcmd:: set protocols mpls interface <interface> + + Use this command to enable MPLS processing on the interface you define. + .. cfgcmd:: set protocols mpls ldp interface <interface> - Use this command to enable LDP, and enable MPLS processing on the interface - you define. + Use this command to enable LDP on the interface you define. .. cfgcmd:: set protocols mpls ldp router-id <address> @@ -200,9 +203,10 @@ Sample configuration to setup LDP on VyOS set protocols ospf area 0 network '192.168.255.252/32' <--- Routing for loopback set protocols ospf area 0 network '192.168.0.5/32' <--- Routing for an interface connecting to the network set protocols ospf parameters router-id '192.168.255.252' <--- Router ID setting for OSPF + set protocols mpls interface 'eth1' <--- Enable MPLS for an interface connecting to network set protocols mpls ldp discovery transport-ipv4-address '192.168.255.252' <--- Transport address for LDP for TCP sessions to connect to - set protocols mpls ldp interface 'eth1' <--- Enable MPLS and LDP for an interface connecting to network - set protocols mpls ldp interface 'lo' <--- Enable MPLS and LDP on loopback for future services connectivity + set protocols mpls ldp interface 'eth1' <--- Enable LDP for an interface connecting to network + set protocols mpls ldp interface 'lo' <--- Enable LDP on loopback for future services connectivity set protocols mpls ldp router-id '192.168.255.252' <--- Router ID setting for LDP set interfaces ethernet eth1 address '192.168.0.5/31' <--- Interface IP for connecting to network set interfaces loopback lo address '192.168.255.252/32' <--- Interface loopback IP for router ID and other uses |