diff options
Diffstat (limited to 'docs/configuration/protocols/ospf.md')
| -rw-r--r-- | docs/configuration/protocols/ospf.md | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/docs/configuration/protocols/ospf.md b/docs/configuration/protocols/ospf.md index adc62520..8b432a2c 100644 --- a/docs/configuration/protocols/ospf.md +++ b/docs/configuration/protocols/ospf.md @@ -109,7 +109,7 @@ starts when the first ospf enabled interface is configured. .. cfgcmd:: set protocols ospf max-metric router-lsa <administrative|on-shutdown <seconds>|on-startup <seconds>> - This enables {rfc}`3137` support, where the OSPF process describes its + This enables :rfc:`3137` support, where the OSPF process describes its transit links in its router-LSA as having infinite distance so that other routers will avoid calculating transit paths through the router while still being able to reach networks through the router. @@ -139,7 +139,7 @@ starts when the first ospf enabled interface is configured. area for inter-area connections. Detailed information about "cisco" and "ibm" models differences can be - found in {rfc}`3509`. A "shortcut" model allows ABR to create routes + found in :rfc:`3509`. A "shortcut" model allows ABR to create routes between areas based on the topology of the areas connected to this router but not using a backbone area in case if non-backbone route will be cheaper. For more information about "shortcut" model, @@ -149,7 +149,7 @@ starts when the first ospf enabled interface is configured. ```{eval-rst} .. cfgcmd:: set protocols ospf parameters rfc1583-compatibility - {rfc}`2328`, the successor to {rfc}`1583`, suggests according to section + :rfc:`2328`, the successor to :rfc:`1583`, suggests according to section G.2 (changes) in section 16.4.1 a change to the path preference algorithm that prevents possible routing loops that were possible in the old version of OSPFv2. More specifically it demands that inter-area paths and @@ -217,7 +217,7 @@ starts when the first ospf enabled interface is configured. .. cfgcmd:: set protocols ospf ldp-sync This command will enable IGP-LDP synchronization globally for OSPF. This - requires for LDP to be functional. This is described in {rfc}`5443`. By + requires for LDP to be functional. This is described in :rfc:`5443`. By default all interfaces operational in OSPF are enabled for synchronization. Loopbacks are exempt. ``` @@ -232,7 +232,7 @@ starts when the first ospf enabled interface is configured. ```{eval-rst} .. cfgcmd:: set protocols ospf capability opaque - ospfd supports Opaque LSA {rfc}`2370` as partial support for MPLS Traffic + ospfd supports Opaque LSA :rfc:`2370` as partial support for MPLS Traffic Engineering LSAs. The opaque-lsa capability must be enabled in the configuration. @@ -494,7 +494,7 @@ starts when the first ospf enabled interface is configured. ```{eval-rst} .. cfgcmd:: set protocols ospf interface <interface> bfd - This command enables {abbr}`BFD (Bidirectional Forwarding Detection)` on + This command enables :abbr:`BFD (Bidirectional Forwarding Detection)` on this OSPF link interface. ``` @@ -595,7 +595,7 @@ Route will be originated on-behalf of all matched external LSAs. ```{eval-rst} .. cfgcmd:: set protocols ospf graceful-restart [grace-period (1-1800)] - Configure Graceful Restart {rfc}`3623` restarting support. When enabled, + Configure Graceful Restart :rfc:`3623` restarting support. When enabled, the default grace period is 120 seconds. To perform a graceful shutdown, the FRR ``graceful-restart prepare ip @@ -606,7 +606,7 @@ Route will be originated on-behalf of all matched external LSAs. ```{eval-rst} .. cfgcmd:: set protocols ospf graceful-restart helper enable [router-id A.B.C.D] - Configure Graceful Restart {rfc}`3623` helper support. By default, helper support + Configure Graceful Restart :rfc:`3623` helper support. By default, helper support is disabled for all neighbours. This config enables/disables helper support on this router for all neighbours. @@ -1351,7 +1351,7 @@ process starts when the first ospf enabled interface is configured. ```{eval-rst} .. cfgcmd:: set protocols ospfv3 graceful-restart [grace-period (1-1800)] - Configure Graceful Restart {rfc}`3623` restarting support. When enabled, + Configure Graceful Restart :rfc:`3623` restarting support. When enabled, the default grace period is 120 seconds. To perform a graceful shutdown, the FRR ``graceful-restart prepare ip @@ -1362,7 +1362,7 @@ process starts when the first ospf enabled interface is configured. ```{eval-rst} .. cfgcmd:: set protocols ospfv3 graceful-restart helper enable [router-id A.B.C.D] - Configure Graceful Restart {rfc}`3623` helper support. By default, helper support + Configure Graceful Restart :rfc:`3623` helper support. By default, helper support is disabled for all neighbours. This config enables/disables helper support on this router for all neighbours. |