diff options
Diffstat (limited to 'docs/interfaces/l2tpv3.rst')
| -rw-r--r-- | docs/interfaces/l2tpv3.rst | 122 |
1 files changed, 0 insertions, 122 deletions
diff --git a/docs/interfaces/l2tpv3.rst b/docs/interfaces/l2tpv3.rst deleted file mode 100644 index ea540c01..00000000 --- a/docs/interfaces/l2tpv3.rst +++ /dev/null @@ -1,122 +0,0 @@ -.. include:: ../_include/need_improvement.txt - -.. _l2tpv3-interface: - -L2TPv3 ------- - -L2TPv3 is a pseudowire protocol, you can read more about on `Wikipedia L2TPv3`_ -or in :rfc:`3921` - -L2TPv3 can transport any traffic including ethernet frames. L2TPv2 is limited -to PPP. - -Over IP -^^^^^^^ - -.. code-block:: none - - # show interfaces l2tpv3 - l2tpv3 l2tpeth10 { - address 192.168.37.1/27 - encapsulation ip - local-ip 192.0.2.1 - peer-session-id 100 - peer-tunnel-id 200 - remote-ip 203.0.113.24 - session-id 100 - tunnel-id 200 - } - -Inverse configuration has to be applied to the remote side. - -Over UDP -^^^^^^^^ - -UDP mode works better with NAT: - -* Set local-ip to your local IP (LAN). -* Add a forwarding rule matching UDP port on your internet router. - -.. code-block:: none - - # show interfaces l2tpv3 - l2tpv3 l2tpeth10 { - address 192.168.37.1/27 - destination-port 9001 - encapsulation udp - local-ip 192.0.2.1 - peer-session-id 100 - peer-tunnel-id 200 - remote-ip 203.0.113.24 - session-id 100 - source-port 9000 - tunnel-id 200 - } - -To create more than one tunnel, use distinct UDP ports. - - -Over IPSec, L2 VPN (bridge) -^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -This is the LAN extension use case. The eth0 port of the distant VPN peers -will be directly connected like if there was a switch between them. - -IPSec: - -.. code-block:: none - - set vpn ipsec ipsec-interfaces <VPN-interface> - set vpn ipsec esp-group test-ESP-1 compression 'disable' - set vpn ipsec esp-group test-ESP-1 lifetime '3600' - set vpn ipsec esp-group test-ESP-1 mode 'transport' - set vpn ipsec esp-group test-ESP-1 pfs 'enable' - set vpn ipsec esp-group test-ESP-1 proposal 1 encryption 'aes128' - set vpn ipsec esp-group test-ESP-1 proposal 1 hash 'sha1' - set vpn ipsec ike-group test-IKE-1 ikev2-reauth 'no' - set vpn ipsec ike-group test-IKE-1 key-exchange 'ikev1' - set vpn ipsec ike-group test-IKE-1 lifetime '3600' - set vpn ipsec ike-group test-IKE-1 proposal 1 dh-group '5' - set vpn ipsec ike-group test-IKE-1 proposal 1 encryption 'aes128' - set vpn ipsec ike-group test-IKE-1 proposal 1 hash 'sha1' - set vpn ipsec site-to-site peer <peer-ip> authentication mode 'pre-shared-secret' - set vpn ipsec site-to-site peer <peer-ip> authentication pre-shared-secret <pre-shared-key> - set vpn ipsec site-to-site peer <peer-ip> connection-type 'initiate' - set vpn ipsec site-to-site peer <peer-ip> ike-group 'test-IKE-1' - set vpn ipsec site-to-site peer <peer-ip> ikev2-reauth 'inherit' - set vpn ipsec site-to-site peer <peer-ip> local-address <local-ip> - set vpn ipsec site-to-site peer <peer-ip> tunnel 1 allow-nat-networks 'disable' - set vpn ipsec site-to-site peer <peer-ip> tunnel 1 allow-public-networks 'disable' - set vpn ipsec site-to-site peer <peer-ip> tunnel 1 esp-group 'test-ESP-1' - set vpn ipsec site-to-site peer <peer-ip> tunnel 1 protocol 'l2tp' - -Bridge: - -.. code-block:: none - - set interfaces bridge br0 description 'L2 VPN Bridge' - # remote side in this example: - # set interfaces bridge br0 address '172.16.30.18/30' - set interfaces bridge br0 address '172.16.30.17/30' - set interfaces bridge br0 member interface eth0 - set interfaces ethernet eth0 description 'L2 VPN Physical port' - -L2TPv3: - -.. code-block:: none - - set interfaces bridge br0 member interface 'l2tpeth0' - set interfaces l2tpv3 l2tpeth0 description 'L2 VPN Tunnel' - set interfaces l2tpv3 l2tpeth0 destination-port '5000' - set interfaces l2tpv3 l2tpeth0 encapsulation 'ip' - set interfaces l2tpv3 l2tpeth0 local-ip <local-ip> - set interfaces l2tpv3 l2tpeth0 mtu '1500' - set interfaces l2tpv3 l2tpeth0 peer-session-id '110' - set interfaces l2tpv3 l2tpeth0 peer-tunnel-id '10' - set interfaces l2tpv3 l2tpeth0 remote-ip <peer-ip> - set interfaces l2tpv3 l2tpeth0 session-id '110' - set interfaces l2tpv3 l2tpeth0 source-port '5000' - set interfaces l2tpv3 l2tpeth0 tunnel-id '10' - -.. _`Wikipedia L2TPv3`: https://en.wikipedia.org/wiki/L2TPv3 |