diff options
Diffstat (limited to 'docs/vpp/configuration/interfaces/md-loopback.md')
| -rw-r--r-- | docs/vpp/configuration/interfaces/md-loopback.md | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/docs/vpp/configuration/interfaces/md-loopback.md b/docs/vpp/configuration/interfaces/md-loopback.md deleted file mode 100644 index bc65338b..00000000 --- a/docs/vpp/configuration/interfaces/md-loopback.md +++ /dev/null @@ -1,120 +0,0 @@ ---- -lastproofread: '2026-03-13' ---- - -(vpp-config-interfaces-loopback)= - -```{include} /_include/need_improvement.txt -``` - -# VPP Loopback Interface Configuration -VPP loopback interfaces provide virtual interfaces that remain -administratively up and are commonly used for stable addressing, -routing protocols, and as Bridge Virtual Interfaces (BVI). Loopback -interfaces in VPP offer high-performance virtual connectivity with optimized -packet processing. - -## Basic Configuration - -### Creating a Loopback Interface -```{cfgcmd} set interfaces vpp loopback \<vpploN\> - -Create a loopback interface where ``<vpploN>`` follows the naming -convention ``vpplo1``, ``vpplo2``, etc. -``` -**Basic Example:** -```none -set interfaces vpp loopback vpplo1 -``` -## Interface Configuration -### Description and Administrative Control -```{cfgcmd} set interfaces vpp loopback \<vpploN\> description \<description\> - -Set a descriptive name for the loopback interface. -``` - -```{cfgcmd} set interfaces vpp loopback \<vpploN\> disable - -Administratively disable the loopback interface. -``` -### Kernel Interface Integration -Kernel interface is bounded to the VPP loopback interface for management -and application compatibility. - -## IP Address Configuration -```{cfgcmd} set interfaces vpp loopback \<vpploN\> address \<ip-address/prefix\> - -Configure IPv4 or IPv6 addresses on the kernel interface. Multiple -addresses can be assigned. -``` -**Examples:** -```none -# IPv4 address -set interfaces vpp loopback vpplo1 address 192.168.1.10/24 - -# IPv6 address -set interfaces vpp loopback vpplo1 address 2001:db8::10/64 -``` -## MTU Configuration -```{cfgcmd} set interfaces vpp loopback \<vpploN\> mtu \<size\> - -Set the Maximum Transmission Unit (MTU) for the kernel interface. -The MTU must be compatible with the connected VPP interface. -``` -## VLAN Configuration -VPP kernel interfaces support VLAN (Virtual LAN) sub-interfaces for network -segmentation. - -### Creating VLAN Sub-interfaces -```{cfgcmd} set interfaces vpp loopback \<vpploN\> vif \<vlan-id\> - -Create a VLAN sub-interface with the specified VLAN ID (0-4094). -``` -### VLAN Sub-interface Configuration -VLAN sub-interfaces support the same configuration options as the parent -interface: -```{cfgcmd} set interfaces vpp loopback \<vpploN\> vif \<vlan-id\> address \<ip-address/prefix\> -``` - -```{cfgcmd} set interfaces vpp loopback \<vpploN\> vif \<vlan-id\> description \<description\> -``` - -```{cfgcmd} set interfaces vpp loopback \<vpploN\> vif \<vlan-id\> disable -``` - -```{cfgcmd} set interfaces vpp loopback \<vpploN\> vif \<vlan-id\> mtu \<size\> -``` -**Examples:** -```none -# Configure VLAN 100 -set interfaces vpp loopback vpplo1 vif 100 address 192.168.100.1/24 -set interfaces vpp loopback vpplo1 vif 100 description "Management VLAN" -set interfaces vpp loopback vpplo1 vif 100 mtu 1500 - -# Configure VLAN 200 -set interfaces vpp loopback vpplo1 vif 200 address 192.168.200.1/24 -set interfaces vpp loopback vpplo1 vif 200 description "Guest VLAN" -``` -## Configuration Examples -### Basic Loopback Interface -```none -# Create simple loopback -set interfaces vpp loopback vpplo1 -set interfaces vpp loopback vpplo1 description "Router ID interface" -``` -### Loopback with Kernel Interface -```none -# Loopback with management access -set interfaces vpp loopback vpplo2 -set interfaces vpp loopback vpplo2 description "Management loopback" -set interfaces vpp loopback vpplo2 address 10.255.255.1/32 -``` -### Bridge Virtual Interface (BVI) -```none -# Loopback as BVI for bridge -set interfaces vpp loopback vpplo3 -set interfaces vpp loopback vpplo3 description "Bridge gateway interface" -set interfaces vpp bridge vppbr1 -set interfaces vpp bridge vppbr1 member interface vpplo3 bvi -set interfaces vpp loopback vpplo3 address 192.168.100.1/24 -``` |