diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/configuration/vpn/index.rst | 10 | ||||
| -rw-r--r-- | docs/configuration/vpn/ipsec/index.rst | 8 | ||||
| -rw-r--r-- | docs/contributing/index.rst | 14 | ||||
| -rw-r--r-- | docs/index.rst | 44 | ||||
| -rw-r--r-- | docs/troubleshooting/connectivity.rst | 150 | ||||
| -rw-r--r-- | docs/troubleshooting/index.rst | 458 | ||||
| -rw-r--r-- | docs/troubleshooting/interfaces.rst | 39 | ||||
| -rw-r--r-- | docs/troubleshooting/monitoring.rst | 161 | ||||
| -rw-r--r-- | docs/troubleshooting/system.rst | 57 | ||||
| -rw-r--r-- | docs/troubleshooting/terminal.rst | 42 |
10 files changed, 498 insertions, 485 deletions
diff --git a/docs/configuration/vpn/index.rst b/docs/configuration/vpn/index.rst index d0121abd..228f83ca 100644 --- a/docs/configuration/vpn/index.rst +++ b/docs/configuration/vpn/index.rst @@ -7,18 +7,10 @@ VPN :maxdepth: 1 :includehidden: + dmvpn ipsec/index l2tp openconnect pptp rsa-keys sstp - - -pages to sort - -.. toctree:: - :maxdepth: 1 - :includehidden: - - dmvpn diff --git a/docs/configuration/vpn/ipsec/index.rst b/docs/configuration/vpn/ipsec/index.rst index e454e2f6..7647d8d2 100644 --- a/docs/configuration/vpn/ipsec/index.rst +++ b/docs/configuration/vpn/ipsec/index.rst @@ -11,11 +11,3 @@ IPsec site2site_ipsec remoteaccess_ipsec troubleshooting_ipsec - -pages to sort - -.. toctree:: - :maxdepth: 1 - :includehidden: - - diff --git a/docs/contributing/index.rst b/docs/contributing/index.rst new file mode 100644 index 00000000..18b925ec --- /dev/null +++ b/docs/contributing/index.rst @@ -0,0 +1,14 @@ +############ +Contributing +############ + +.. toctree:: + :maxdepth: 1 + + build-vyos + development + cla + issues-features + upstream-packages + debugging + testing diff --git a/docs/index.rst b/docs/index.rst index 70b862b4..660daa46 100644 --- a/docs/index.rst +++ b/docs/index.rst @@ -11,20 +11,27 @@ VyOS User Guide .. grid-item-card:: Get / Build VyOS - Quickly :ref:`Build<contributing/build-vyos:build vyos>` your own Image or take a look at how to :ref:`download<installation/install:download>` a free or supported version. + Quickly :ref:`Build<contributing/build-vyos:build vyos>` + your own Image or take a look at how to + :ref:`download<installation/install:download>` + a free or supported version. .. grid-item-card:: Install VyOS - Read about how to install VyOS on :ref:`Bare Metal<installation/install:installation>` or in a - :ref:`Virtual Environment<installation/virtual/index:Virtual Environments>` and - how to use an image with the usual :ref:`cloud<installation/cloud/index:Cloud Environments>` providers + Read about how to install VyOS on + :ref:`Bare Metal<installation/install:installation>` + or in a :ref:`VM <installation/virtual/index:Virtual Environments>` + and how to use an image with the usual + :ref:`cloud<installation/cloud/index:Cloud Environments>` + providers .. grid-item-card:: Configuration and Operation - Use the :ref:`Quickstart Guide<quick-start:Quick Start>`, to have a fast overview. Or go deeper and - set up :ref:`advanced routing<configuration/protocols/index:protocols>`, + Use the :ref:`Quickstart Guide<quick-start:Quick Start>`, + to have a fast overview. Or go deeper and set up + :ref:`advanced routing<configuration/protocols/index:protocols>`, :ref:`VRFs<configuration/vrf/index:vrf>`, or :ref:`VPNs<configuration/vpn/index:vpn>` for example. @@ -33,21 +40,28 @@ VyOS User Guide Integrate VyOS in your automation Workflow with :ref:`Ansible<vyos-ansible>`, - have your own :ref:`local scripts<command-scripting>`, or configure VyOS with the :ref:`HTTPS-API<vyosapi>`. + have your own :ref:`local scripts<command-scripting>`, + or configure VyOS with the + :ref:`HTTPS-API<vyosapi>`. .. grid-item-card:: Examples - Get some inspiration from the :ref:`Configuration Blueprints<configexamples/index:Configuration Blueprints>` + Get some inspiration from the + :ref:`Blueprints <configexamples/index:Configuration Blueprints>` to build your infrastructure. .. grid-item-card:: Contribute and Community | There are many ways to contribute to the project. - | Add missing parts or improve the :ref:`Documentation<documentation:Write Documentation>`. - | Discuss in `Slack <https://slack.vyos.io/>`_ or the `Forum <https://forum.vyos.io>`_. - | Or you can pick up a `Task <https://vyos.dev/>`_ and fix the :ref:`code<contributing/development:development>`. + | Add missing parts or improve the + :ref:`Documentation<documentation:Write Documentation>`. + | Discuss in `Slack <https://slack.vyos.io/>`_ + or the `Forum <https://forum.vyos.io>`_. + | Or you can pick up a `Task <https://vyos.dev/>`_ + and fix the + :ref:`code<contributing/development:development>`. .. toctree:: @@ -86,13 +100,7 @@ VyOS User Guide :hidden: :caption: Development - contributing/build-vyos - contributing/development - contributing/cla - contributing/issues-features - contributing/upstream-packages - contributing/debugging - contributing/testing + contributing/index .. toctree:: diff --git a/docs/troubleshooting/connectivity.rst b/docs/troubleshooting/connectivity.rst new file mode 100644 index 00000000..aa2a0151 --- /dev/null +++ b/docs/troubleshooting/connectivity.rst @@ -0,0 +1,150 @@ +################## +Connectivity Tests +################## + +************************ +Basic Connectivity Tests +************************ + +Verifying connectivity can be done with the familiar `ping` and `traceroute` +commands. The options for each are shown (the options for each command were +displayed using the built-in help as described in the :ref:`cli` +section and are omitted from the output here): + +.. opcmd:: ping <destination> + + Send ICMP echo requests to destination host. There are multiple options to + ping, including VRF support. + + .. code-block:: none + + vyos@vyos:~$ ping 10.1.1.1 + Possible completions: + <Enter> Execute the current command + adaptive Ping options + allow-broadcast + audible + bypass-route + count + deadline + do-not-fragment + flood + interface + interval + mark + no-loopback + numeric + pattern + quiet + record-route + size + timestamp + tos + ttl + verbose + vrf + + +.. opcmd:: traceroute <destination> + + Trace path to target. + + .. code-block:: none + + vyos@vyos:~$ traceroute + Possible completions: + <hostname> Track network path to specified node + <x.x.x.x> + <h:h:h:h:h:h:h:h> + ipv4 Track network path to <hostname|IPv4 address> + ipv6 Track network path to <hostname|IPv6 address> + + +*************************** +Advanced Connectivity Tests +*************************** + +.. opcmd:: monitor traceroute <destination> + + However, another helper is available which combines ping and traceroute + into a single tool. An example of its output is shown: + + .. code-block:: none + + vyos@vyos:~$ mtr 10.62.212.12 + + My traceroute [v0.85] + vyos (0.0.0.0) + Keys: Help Display mode Restart statistics Order of fields quit + Packets Pings + Host Loss% Snt Last Avg Best Wrst StDev + 1. 10.11.110.4 0.0% 34 0.5 0.5 0.4 0.8 0.1 + 2. 10.62.255.184 0.0% 34 1.1 1.0 0.9 1.4 0.1 + 3. 10.62.255.71 0.0% 34 1.4 1.4 1.3 2.0 0.1 + 4. 10.62.212.12 0.0% 34 1.6 1.6 1.6 1.7 0.0 + + .. note:: The output consumes the screen and will replace your command + prompt. + + Several options are available for changing the display output. Press `h` to + invoke the built in help system. To quit, just press `q` and you'll be + returned to the VyOS command prompt. + +*********************** +IPv6 Topology Discovery +*********************** + +IPv6 uses different techniques to discover its Neighbors/topology. + +Router Discovery +================ + +.. opcmd:: force ipv6-rd interface <interface> [address <ipv6-address>] + + Discover routers via eth0. + + Example: + + .. code-block:: none + + vyos@vyos:~$ force ipv6-rd interface eth0 + Soliciting ff02::2 (ff02::2) on eth0... + + Hop limit : 60 ( 0x3c) + Stateful address conf. : No + Stateful other conf. : No + Mobile home agent : No + Router preference : high + Neighbor discovery proxy : No + Router lifetime : 1800 (0x00000708) seconds + Reachable time : unspecified (0x00000000) + Retransmit time : unspecified (0x00000000) + Prefix : 240e:fe:8ca7:ea01::/64 + On-link : Yes + Autonomous address conf.: Yes + Valid time : 2592000 (0x00278d00) seconds + Pref. time : 14400 (0x00003840) seconds + Prefix : fc00:470:f1cd:101::/64 + On-link : Yes + Autonomous address conf.: Yes + Valid time : 2592000 (0x00278d00) seconds + Pref. time : 14400 (0x00003840) seconds + Recursive DNS server : fc00:470:f1cd::ff00 + DNS server lifetime : 600 (0x00000258) seconds + Source link-layer address: 00:98:2B:F8:3F:11 + from fe80::298:2bff:fef8:3f11 + +Neighbor Discovery +================== + +.. opcmd:: force ipv6-nd interface <interface> address <ipv6-address> + + + Example: + + .. code-block:: none + + vyos@vyos:~$ force ipv6-nd interface eth0 address fc00:470:f1cd:101::1 + + Soliciting fc00:470:f1cd:101::1 (fc00:470:f1cd:101::1) on eth0... + Target link-layer address: 00:98:2B:F8:3F:11 from fc00:470:f1cd:101::1 diff --git a/docs/troubleshooting/index.rst b/docs/troubleshooting/index.rst index 8a34edd9..791afc56 100644 --- a/docs/troubleshooting/index.rst +++ b/docs/troubleshooting/index.rst @@ -8,453 +8,11 @@ Sometimes things break or don't work as expected. This section describes several troubleshooting tools provided by VyOS that can help when something goes wrong. -****************** -Connectivity Tests -****************** - -Basic Connectivity Tests -======================== - -Verifying connectivity can be done with the familiar `ping` and `traceroute` -commands. The options for each are shown (the options for each command were -displayed using the built-in help as described in the :ref:`cli` -section and are omitted from the output here): - -.. opcmd:: ping <destination> - - Send ICMP echo requests to destination host. There are multiple options to - ping, inkl. VRF support. - - .. code-block:: none - - vyos@vyos:~$ ping 10.1.1.1 - Possible completions: - <Enter> Execute the current command - adaptive Ping options - allow-broadcast - audible - bypass-route - count - deadline - do-not-fragment - flood - interface - interval - mark - no-loopback - numeric - pattern - quiet - record-route - size - timestamp - tos - ttl - verbose - vrf - - -.. opcmd:: traceroute <destination> - - Trace path to target. - - .. code-block:: none - - vyos@vyos:~$ traceroute - Possible completions: - <hostname> Track network path to specified node - <x.x.x.x> - <h:h:h:h:h:h:h:h> - ipv4 Track network path to <hostname|IPv4 address> - ipv6 Track network path to <hostname|IPv6 address> - - -Advanced Connectivity Tests -=========================== - -.. opcmd:: monitor traceroute <destination> - - However, another helper is available which combines ping and traceroute - into a single tool. An example of its output is shown: - - .. code-block:: none - - vyos@vyos:~$ mtr 10.62.212.12 - - My traceroute [v0.85] - vyos (0.0.0.0) - Keys: Help Display mode Restart statistics Order of fields quit - Packets Pings - Host Loss% Snt Last Avg Best Wrst StDev - 1. 10.11.110.4 0.0% 34 0.5 0.5 0.4 0.8 0.1 - 2. 10.62.255.184 0.0% 34 1.1 1.0 0.9 1.4 0.1 - 3. 10.62.255.71 0.0% 34 1.4 1.4 1.3 2.0 0.1 - 4. 10.62.212.12 0.0% 34 1.6 1.6 1.6 1.7 0.0 - - .. note:: The output consumes the screen and will replace your command - prompt. - - Several options are available for changing the display output. Press `h` to - invoke the built in help system. To quit, just press `q` and you'll be - returned to the VyOS command prompt. - -IPv6 Topology Discovery -======================= - -IPv6 uses different techniques to discover its Neighbors/topology. - -Router Discovery ----------------- - -.. opcmd:: force ipv6-rd interface <interface> [address <ipv6-address>] - - Discover routers via eth0. - - Example: - - .. code-block:: none - - vyos@vyos:~$ force ipv6-rd interface eth0 - Soliciting ff02::2 (ff02::2) on eth0... - - Hop limit : 60 ( 0x3c) - Stateful address conf. : No - Stateful other conf. : No - Mobile home agent : No - Router preference : high - Neighbor discovery proxy : No - Router lifetime : 1800 (0x00000708) seconds - Reachable time : unspecified (0x00000000) - Retransmit time : unspecified (0x00000000) - Prefix : 240e:fe:8ca7:ea01::/64 - On-link : Yes - Autonomous address conf.: Yes - Valid time : 2592000 (0x00278d00) seconds - Pref. time : 14400 (0x00003840) seconds - Prefix : fc00:470:f1cd:101::/64 - On-link : Yes - Autonomous address conf.: Yes - Valid time : 2592000 (0x00278d00) seconds - Pref. time : 14400 (0x00003840) seconds - Recursive DNS server : fc00:470:f1cd::ff00 - DNS server lifetime : 600 (0x00000258) seconds - Source link-layer address: 00:98:2B:F8:3F:11 - from fe80::298:2bff:fef8:3f11 - -Neighbor Discovery ------------------- - -.. opcmd:: force ipv6-nd interface <interface> address <ipv6-address> - - - Example: - - .. code-block:: none - - vyos@vyos:~$ force ipv6-nd interface eth0 address fc00:470:f1cd:101::1 - - Soliciting fc00:470:f1cd:101::1 (fc00:470:f1cd:101::1) on eth0... - Target link-layer address: 00:98:2B:F8:3F:11 from fc00:470:f1cd:101::1 - - -*************** -Interface names -*************** - -If you find the names of your interfaces have changed, this could be because -your MAC addresses have changed. - -* For example, you have a VyOS VM with 4 Ethernet interfaces named - eth0, eth1, eth2 and eth3. Then, you migrate your VyOS VM to a different - host and find your interfaces now are eth4, eth5, eth6 and eth7. - - One way to fix this issue **taking control of the MAC addresses** is: - - Log into VyOS and run this command to display your interface settings. - - .. code-block:: none - - show interfaces detail - - Take note of MAC addresses. - - Now, in order to update a MAC address in the configuration, run this command - specifying the interface name and MAC address you want. - - .. code-block:: none - - set interfaces eth0 hw-id 00:0c:29:da:a4:fe - - If it is a VM, go into the settings of the host and set the MAC address to - the settings found in the config.boot file. You can also set the MAC to - static if the host allows so. - - -* Another example could be when cloning VyOS VMs in GNS3 and you get into the - same issue: interface names have changed. - - And **a more generic way to fix it** is just deleting every MAC address at - the configuration file of the cloned machine. They will be correctly - regenerated automatically. - - -********** -Monitoring -********** - -VyOS features several monitoring tools. - -.. code-block:: none - - vyos@vyos:~$ monitor - Possible completions: - bandwidth Monitor interface bandwidth in real time - bandwidth-test - Initiate or wait for bandwidth test - cluster Monitor clustering service - command Monitor an operational mode command (refreshes every 2 seconds) - conntrack-sync - Monitor conntrack-sync - content-inspection - Monitor Content-Inspection - dhcp Monitor Dynamic Host Control Protocol (DHCP) - dns Monitor a Domain Name Service (DNS) daemon - firewall Monitor Firewall - https Monitor the Secure Hypertext Transfer Protocol (HTTPS) service - lldp Monitor Link Layer Discovery Protocol (LLDP) daemon - log Monitor last lines of messages file - nat Monitor network address translation (NAT) - ndp Monitor the NDP information received by the router through the device - openvpn Monitor OpenVPN - protocol Monitor routing protocols - snmp Monitor Simple Network Management Protocol (SNMP) daemon - stop-all Stop all current background monitoring processes - traceroute Monitor the path to a destination in realtime - traffic Monitor traffic dumps - vpn Monitor VPN - vrrp Monitor Virtual Router Redundancy Protocol (VRRP) - webproxy Monitor Webproxy service - - -Traffic Dumps -============= - -To monitor interface traffic, issue the :code:`monitor traffic interface <name>` -command, replacing `<name>` with your chosen interface. - -.. code-block:: none - - vyos@vyos:~$ monitor traffic interface eth0 - tcpdump: verbose output suppressed, use -v or -vv for full protocol decode - listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes - 15:54:28.581601 IP 192.168.0.1 > vyos: ICMP echo request, id 1870, seq 3848, length 64 - 15:54:28.581660 IP vyos > 192.168.0.1: ICMP echo reply, id 1870, seq 3848, length 64 - 15:54:29.583399 IP 192.168.0.1 > vyos: ICMP echo request, id 1870, seq 3849, length 64 - 15:54:29.583454 IP vyos > 192.168.0.1: ICMP echo reply, id 1870, seq 3849, length 64 - ^C - 4 packets captured - 4 packets received by filter - 0 packets dropped by kernel - vyos@vyos:~$ - -To quit monitoring, press `Ctrl-c` and you'll be returned to the VyOS command -prompt. - -Traffic can be filtered and saved. - -.. code-block:: none - - vyos@vyos:~$ monitor traffic interface eth0 - Possible completions: - <Enter> Execute the current command - filter Monitor traffic matching filter conditions - save Save traffic dump from an interface to a file - - -Interface Bandwidth Usage -========================= - -to take a quick view on the used bandwidth of an interface use the ``monitor -bandwidth`` command - -.. code-block:: none - - vyos@vyos:~$ monitor bandwidth interface eth0 - -show the following: - -.. code-block:: none - - B (RX Bytes/second) - 198.00 .|....|..................................................... - 165.00 .|....|..................................................... - 132.00 ||..|.|..................................................... - 99.00 ||..|.|..................................................... - 66.00 |||||||..................................................... - 33.00 |||||||..................................................... - 1 5 10 15 20 25 30 35 40 45 50 55 60 - - KiB (TX Bytes/second) - 3.67 ......|..................................................... - 3.06 ......|..................................................... - 2.45 ......|..................................................... - 1.84 ......|..................................................... - 1.22 ......|..................................................... - 0.61 :::::||..................................................... - 1 5 10 15 20 25 30 35 40 45 50 55 60 - -Interface Performance -===================== - -To take a look on the network bandwidth between two nodes, the ``monitor -bandwidth-test`` command is used to run iperf. - -.. code-block:: none - - vyos@vyos:~$ monitor bandwidth-test - Possible completions: - accept Wait for bandwidth test connections (port TCP/5001) - initiate Initiate a bandwidth test - -* The ``accept`` command opens a listening iperf server on TCP Port 5001 -* The ``initiate`` command connects to that server to perform the test. - -.. code-block:: none - - vyos@vyos:~$ monitor bandwidth-test initiate - Possible completions: - <hostname> Initiate a bandwidth test to specified host (port TCP/5001) - <x.x.x.x> - <h:h:h:h:h:h:h:h> - - -Monitor command -=============== - -The ``monitor command`` command allows you to repeatedly run a command to view -a continuously refreshed output. The command is run and output every 2 seconds, -allowing you to monitor the output continuously without having to re-run the -command. This can be useful to follow routing adjacency formation. - -.. code-block:: none - - vyos@router:~$ monitor command "show interfaces" - -Will clear the screen and show you the output of ``show interfaces`` every -2 seconds. - -.. code-block:: none - - Every 2.0s: /opt/vyatta/bin/vyatta-op-cmd-wrapper Sun Mar 26 02:49:46 2019 - - Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down - Interface IP Address S/L Description - --------- ---------- --- ----------- - eth0 192.168.1.1/24 u/u - eth0.5 198.51.100.4/24 u/u WAN - lo 127.0.0.1/8 u/u - ::1/128 - vti0 172.25.254.2/30 u/u - vti1 172.25.254.9/30 u/u - -**************** -Terminal/Console -**************** - -Sometimes you need to clear counters or statistics to troubleshoot better. - -To do this use the ``clear`` command in Operational mode. - -to clear the console output - -.. code-block:: none - - vyos@vyos:~$ clear console - -to clear interface counters - -.. code-block:: none - - # clear all interfaces - vyos@vyos:~$ clear interface ethernet counters - # clear specific interface - vyos@vyos:~$ clear interface ethernet eth0 counters - -The command follow the same logic as the ``set`` command in configuration mode. - -.. code-block:: none - - # clear all counters of a interface type - vyos@vyos:~$ clear interface <interface_type> counters - # clear counter of a interface in interface_type - vyos@vyos:~$ clear interface <interface_type> <interace_name> counters - - -to clear counters on firewall rulesets or single rules - -.. code-block:: none - - vyos@vyos:~$ clear firewall name <ipv4 ruleset name> counters - vyos@vyos:~$ clear firewall name <ipv4 ruleset name> rule <rule#> counters - - vyos@vyos:~$ clear firewall ipv6-name <ipv6 ruleset name> counters - vyos@vyos:~$ clear firewall ipv6-name <ipv6 ruleset name> rule <rule#> counters - - -****************** -System Information -****************** - -.. _boot-steps: - -Boot Steps -========== - -VyOS 1.2 uses `Debian Jessie`_ as the base Linux operating system. Jessie was -the first version of Debian that uses systemd_ as the default init system. - -These are the boot steps for VyOS 1.2 - -1. The BIOS loads Grub (or isolinux for the Live CD) -2. Grub then starts the Linux boot and loads the Linux Kernel ``/boot/vmlinuz`` -3. Kernel Launches Systemd ``/lib/systemd/systemd`` -4. Systemd loads the VyOS service file - ``/lib/systemd/system/vyos-router.service`` -5. The service file launches the VyOS router init script - ``/usr/libexec/vyos/init/vyos-router`` - this is part of the vyatta-cfg_ - Debian package - - 1. Starts FRR_ - successor to `GNU Zebra`_ and Quagga_ - - 2. Initialises the boot configuration file - copies over - ``config.boot.default`` if there is no configuration - 3. Runs the configuration migration, if the configuration is for an older - version of VyOS - 4. Runs The pre-config script, if there is one - ``/config/scripts/vyos-preconfig-bootup.script`` - 5. If the config file was upgraded, runs any post upgrade scripts - ``/config/scripts/post-upgrade.d`` - 6. Starts ``rl-system`` and ``firewall`` - 7. Mounts the ``/boot`` partition - 8. The boot configuration file is then applied by ``/opt/vyatta/sbin/ - vyatta-boot-config-loader/opt/vyatta/etc/config/config.boot`` - - 1. The config loader script writes log entries to - ``/var/log/vyatta-config-loader.log`` - - 9. Runs ``telinit q`` to tell the init system to reload ``/etc/inittab`` - 10. Finally it runs the post-config script - ``/config/scripts/vyos-postconfig-bootup.script`` - -.. stop_vyoslinter - -.. _Quagga: https://www.quagga.net/ -.. _`GNU Zebra`: https://www.gnu.org/software/zebra/ -.. _FRR: https://frrouting.org/ -.. _vyatta-cfg: https://github.com/vyos/vyatta-cfg -.. _systemd: https://freedesktop.org/wiki/Software/systemd/ -.. _`Debian Jessie`: https://www.debian.org/releases/jessie/ -.. _tshark: https://www.wireshark.org/docs/man-pages/tshark.html -.. _`PCAP filter expressions`: http://www.tcpdump.org/manpages/pcap-filter.7.html - -.. start_vyoslinter +.. toctree:: + :maxdepth: 1 + + connectivity + interfaces + monitoring + terminal + system diff --git a/docs/troubleshooting/interfaces.rst b/docs/troubleshooting/interfaces.rst new file mode 100644 index 00000000..95aceb12 --- /dev/null +++ b/docs/troubleshooting/interfaces.rst @@ -0,0 +1,39 @@ +############### +Interface Names +############### + +If you find the names of your interfaces have changed, this could be because +your MAC addresses have changed. + +* For example, you have a VyOS VM with 4 Ethernet interfaces named + eth0, eth1, eth2 and eth3. Then, you migrate your VyOS VM to a different + host and find your interfaces now are eth4, eth5, eth6 and eth7. + + One way to fix this issue **taking control of the MAC addresses** is: + + Log into VyOS and run this command to display your interface settings. + + .. code-block:: none + + show interfaces detail + + Take note of MAC addresses. + + Now, in order to update a MAC address in the configuration, run this command + specifying the interface name and MAC address you want. + + .. code-block:: none + + set interfaces ethernet eth0 hw-id 00:0c:29:da:a4:fe + + If it is a VM, go into the settings of the host and set the MAC address to + the settings found in the config.boot file. You can also set the MAC to + static if the host allows so. + + +* Another example could be when cloning VyOS VMs in GNS3 and you get into the + same issue: interface names have changed. + + And **a more generic way to fix it** is just deleting every MAC address at + the configuration file of the cloned machine. They will be correctly + regenerated automatically. diff --git a/docs/troubleshooting/monitoring.rst b/docs/troubleshooting/monitoring.rst new file mode 100644 index 00000000..ef40c937 --- /dev/null +++ b/docs/troubleshooting/monitoring.rst @@ -0,0 +1,161 @@ +########## +Monitoring +########## + +VyOS features several monitoring tools. + +.. code-block:: none + + vyos@vyos:~$ monitor + Possible completions: + bandwidth Monitor interface bandwidth in real time + bandwidth-test + Initiate or wait for bandwidth test + cluster Monitor clustering service + command Monitor an operational mode command (refreshes every 2 seconds) + conntrack-sync + Monitor conntrack-sync + content-inspection + Monitor Content-Inspection + dhcp Monitor Dynamic Host Control Protocol (DHCP) + dns Monitor a Domain Name Service (DNS) daemon + firewall Monitor Firewall + https Monitor the Secure Hypertext Transfer Protocol (HTTPS) service + lldp Monitor Link Layer Discovery Protocol (LLDP) daemon + log Monitor last lines of messages file + nat Monitor network address translation (NAT) + ndp Monitor the NDP information received by the router through the device + openvpn Monitor OpenVPN + protocol Monitor routing protocols + snmp Monitor Simple Network Management Protocol (SNMP) daemon + stop-all Stop all current background monitoring processes + traceroute Monitor the path to a destination in realtime + traffic Monitor traffic dumps + vpn Monitor VPN + vrrp Monitor Virtual Router Redundancy Protocol (VRRP) + webproxy Monitor Webproxy service + + +************* +Traffic Dumps +************* + +To monitor interface traffic, issue the :code:`monitor traffic interface <name>` +command, replacing `<name>` with your chosen interface. + +.. code-block:: none + + vyos@vyos:~$ monitor traffic interface eth0 + tcpdump: verbose output suppressed, use -v or -vv for full protocol decode + listening on eth0, link-type EN10MB (Ethernet), capture size 262144 bytes + 15:54:28.581601 IP 192.168.0.1 > vyos: ICMP echo request, id 1870, seq 3848, length 64 + 15:54:28.581660 IP vyos > 192.168.0.1: ICMP echo reply, id 1870, seq 3848, length 64 + 15:54:29.583399 IP 192.168.0.1 > vyos: ICMP echo request, id 1870, seq 3849, length 64 + 15:54:29.583454 IP vyos > 192.168.0.1: ICMP echo reply, id 1870, seq 3849, length 64 + ^C + 4 packets captured + 4 packets received by filter + 0 packets dropped by kernel + vyos@vyos:~$ + +To quit monitoring, press :kbd:`Ctrl-C` and you'll be returned to the VyOS command +prompt. + +Traffic can be filtered and saved. + +.. code-block:: none + + vyos@vyos:~$ monitor traffic interface eth0 + Possible completions: + <Enter> Execute the current command + filter Monitor traffic matching filter conditions + save Save traffic dump from an interface to a file + + +************************* +Interface Bandwidth Usage +************************* + +To quickly view the bandwidth usage of an interface, use the ``monitor bandwidth`` command: + +.. code-block:: none + + vyos@vyos:~$ monitor bandwidth interface eth0 + +This shows the following: + +.. code-block:: none + + B (RX Bytes/second) + 198.00 .|....|..................................................... + 165.00 .|....|..................................................... + 132.00 ||..|.|..................................................... + 99.00 ||..|.|..................................................... + 66.00 |||||||..................................................... + 33.00 |||||||..................................................... + 1 5 10 15 20 25 30 35 40 45 50 55 60 + + KiB (TX Bytes/second) + 3.67 ......|..................................................... + 3.06 ......|..................................................... + 2.45 ......|..................................................... + 1.84 ......|..................................................... + 1.22 ......|..................................................... + 0.61 :::::||..................................................... + 1 5 10 15 20 25 30 35 40 45 50 55 60 + +********************* +Interface Performance +********************* + +To take a look on the network bandwidth between two nodes, the ``monitor +bandwidth-test`` command is used to run iperf. + +.. code-block:: none + + vyos@vyos:~$ monitor bandwidth-test + Possible completions: + accept Wait for bandwidth test connections (port TCP/5001) + initiate Initiate a bandwidth test + +* The ``accept`` command opens a listening iperf server on TCP Port 5001 +* The ``initiate`` command connects to that server to perform the test. + +.. code-block:: none + + vyos@vyos:~$ monitor bandwidth-test initiate + Possible completions: + <hostname> Initiate a bandwidth test to specified host (port TCP/5001) + <x.x.x.x> + <h:h:h:h:h:h:h:h> + + +*************** +Monitor command +*************** + +The ``monitor command`` command allows you to repeatedly run a command to view +a continuously refreshed output. The command is run and output every 2 seconds, +allowing you to monitor the output continuously without having to re-run the +command. This can be useful to follow routing adjacency formation. + +.. code-block:: none + + vyos@router:~$ monitor command "show interfaces" + +Will clear the screen and show you the output of ``show interfaces`` every +2 seconds. + +.. code-block:: none + + Every 2.0s: /opt/vyatta/bin/vyatta-op-cmd-wrapper Sun Mar 26 02:49:46 2019 + + Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down + Interface IP Address S/L Description + --------- ---------- --- ----------- + eth0 192.168.1.1/24 u/u + eth0.5 198.51.100.4/24 u/u WAN + lo 127.0.0.1/8 u/u + ::1/128 + vti0 172.25.254.2/30 u/u + vti1 172.25.254.9/30 u/u diff --git a/docs/troubleshooting/system.rst b/docs/troubleshooting/system.rst new file mode 100644 index 00000000..3a9ec735 --- /dev/null +++ b/docs/troubleshooting/system.rst @@ -0,0 +1,57 @@ +################## +System Information +################## + +.. _boot-steps: + +********** +Boot Steps +********** + +VyOS 1.2 uses `Debian Jessie`_ as the base Linux operating system. Jessie was +the first version of Debian that uses systemd_ as the default init system. + +These are the boot steps for VyOS 1.2 + +1. The BIOS loads Grub (or isolinux for the Live CD) +2. Grub then starts the Linux boot and loads the Linux Kernel ``/boot/vmlinuz`` +3. Kernel Launches Systemd ``/lib/systemd/systemd`` +4. Systemd loads the VyOS service file + ``/lib/systemd/system/vyos-router.service`` +5. The service file launches the VyOS router init script + ``/usr/libexec/vyos/init/vyos-router`` - this is part of the vyatta-cfg_ + Debian package + + 1. Starts FRR_ - successor to `GNU Zebra`_ and Quagga_ + + 2. Initialises the boot configuration file - copies over + ``config.boot.default`` if there is no configuration + 3. Runs the configuration migration, if the configuration is for an older + version of VyOS + 4. Runs The pre-config script, if there is one + ``/config/scripts/vyos-preconfig-bootup.script`` + 5. If the config file was upgraded, runs any post upgrade scripts + ``/config/scripts/post-upgrade.d`` + 6. Starts ``rl-system`` and ``firewall`` + 7. Mounts the ``/boot`` partition + 8. The boot configuration file is then applied by ``/opt/vyatta/sbin/vyatta-boot-config-loader/opt/vyatta/etc/config/config.boot`` + + 1. The config loader script writes log entries to + ``/var/log/vyatta-config-loader.log`` + + 9. Runs ``telinit q`` to tell the init system to reload ``/etc/inittab`` + 10. Finally it runs the post-config script + ``/config/scripts/vyos-postconfig-bootup.script`` + +.. stop_vyoslinter + +.. _Quagga: https://www.quagga.net/ +.. _`GNU Zebra`: https://www.gnu.org/software/zebra/ +.. _FRR: https://frrouting.org/ +.. _vyatta-cfg: https://github.com/vyos/vyatta-cfg +.. _systemd: https://freedesktop.org/wiki/Software/systemd/ +.. _`Debian Jessie`: https://www.debian.org/releases/jessie/ +.. _tshark: https://www.wireshark.org/docs/man-pages/tshark.html +.. _`PCAP filter expressions`: http://www.tcpdump.org/manpages/pcap-filter.7.html + +.. start_vyoslinter diff --git a/docs/troubleshooting/terminal.rst b/docs/troubleshooting/terminal.rst new file mode 100644 index 00000000..fb197730 --- /dev/null +++ b/docs/troubleshooting/terminal.rst @@ -0,0 +1,42 @@ +################ +Terminal/Console +################ + +Sometimes you need to clear counters or statistics to troubleshoot better. + +To do this use the ``clear`` command in Operational mode. + +to clear the console output + +.. code-block:: none + + vyos@vyos:~$ clear console + +to clear interface counters + +.. code-block:: none + + # clear all interfaces + vyos@vyos:~$ clear interface ethernet counters + # clear specific interface + vyos@vyos:~$ clear interface ethernet eth0 counters + +The command follows the same logic as the ``set`` command in configuration mode. + +.. code-block:: none + + # clear all counters of an interface type + vyos@vyos:~$ clear interface <interface_type> counters + # clear counter of an interface in interface_type + vyos@vyos:~$ clear interface <interface_type> <interface_name> counters + + +to clear counters on firewall rulesets or single rules + +.. code-block:: none + + vyos@vyos:~$ clear firewall name <ipv4 ruleset name> counters + vyos@vyos:~$ clear firewall name <ipv4 ruleset name> rule <rule#> counters + + vyos@vyos:~$ clear firewall ipv6-name <ipv6 ruleset name> counters + vyos@vyos:~$ clear firewall ipv6-name <ipv6 ruleset name> rule <rule#> counters |