summaryrefslogtreecommitdiff
path: root/docs/interfaces/dummy.rst
blob: e452ae73f3c3362ed4b6a2ecf00daddcf4ad81e1 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
.. _dummy-interface:

#####
Dummy
#####

The dummy interface is really a little exotic, but rather useful nevertheless.
Dummy interfaces are much like the :ref:`loopback-interface` interface, except
you can have as many as you want.

.. note:: Dummy interfaces can be used as interfaces that always stay up (in
   the same fashion to loopbacks in Cisco IOS), or for testing purposes.

.. hint:: A Dummy interface is always up, thus it could be used for
   management traffic or as source/destination for and :abbr:`IGP (Interior
   Gateway Protocol)` like :ref:`bgp` so your internal BGP link is not dependent
   on physical link states and multiple routes can be chosen to the
   destination. A :ref:`dummy-interface` Interface should always be preferred
   over a :ref:`loopback-interface` interface.


Configuration
#############

Address
-------

.. cfgcmd:: set interfaces dummy <interface> address <address | dhcp | dhcpv6>

   Configure dummy interface `<interface>` with one or more interface
   addresses. Address can be specified multiple times as IPv4 and/or IPv6
   address, e.g. 192.0.2.1/24 and/or 2001:db8::1/64

   Example:

   .. code-block:: none

     set interfaces dummy dum10 address 192.0.2.1/24
     set interfaces dummy dum10 address 192.0.2.2/24
     set interfaces dummy dum10 address 2001:db8::ffff/64
     set interfaces dummy dum10 address 2001:db8:100::ffff/64

Link Administration
-------------------

.. cfgcmd:: set interfaces dummy <interface> description <description>

   Assign given `<description>` to interface. Description will also be passed
   to SNMP monitoring systems.

.. cfgcmd:: set interfaces dummy <interface> disable

   Disable given `<interface>`. It will be placed in administratively down
   state.

Operation
=========

.. opcmd:: show interfaces dummy

   Show brief interface information.information

   .. code-block:: none

     vyos@vyos:~$ show interfaces dummy
     Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
     Interface        IP Address                        S/L  Description
     ---------        ----------                        ---  -----------
     dum0             172.18.254.201/32                 u/u

.. opcmd:: show interfaces dummy <interface>

   Show detailed information on given `<interface>`

   .. code-block:: none

     vyos@vyos:~$ show interfaces ethernet eth0
     dum0: <BROADCAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN group default qlen 1000
         link/ether 26:7c:8e:bc:fc:f5 brd ff:ff:ff:ff:ff:ff
         inet 172.18.254.201/32 scope global dum0
            valid_lft forever preferred_lft forever
         inet6 fe80::247c:8eff:febc:fcf5/64 scope link
            valid_lft forever preferred_lft forever

         RX:  bytes    packets     errors    dropped    overrun      mcast
                  0          0          0          0          0          0
         TX:  bytes    packets     errors    dropped    carrier collisions
            1369707       4267          0          0          0          0