blob: 55656d5dbff4808cbb245729b15cf8557476758a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
|
.. _vlan-interface:
VLAN (802.1q)
-------------
IEEE 802.1q, often referred to as Dot1q, is the networking standard that
supports virtual LANs (VLANs) on an IEEE 802.3 Ethernet network. The
standard defines a system of VLAN tagging for Ethernet frames and the
accompanying procedures to be used by bridges and switches in handling
such frames. The standard also contains provisions for a quality-of-service
prioritization scheme commonly known as IEEE 802.1p and defines the Generic
Attribute Registration Protocol.
Portions of the network which are VLAN-aware (i.e., IEEE 802.1q conformant)
can include VLAN tags. When a frame enters the VLAN-aware portion of the
network, a tag is added to represent the VLAN membership. Each frame must
be distinguishable as being within exactly one VLAN. A frame in the
VLAN-aware portion of the network that does not contain a VLAN tag is
assumed to be flowing on the native VLAN.
The standard was developed by IEEE 802.1, a working group of the IEEE 802
standards committee, and continues to be actively revised. One of the
notable revisions is 802.1Q-2014 which incorporated IEEE 802.1aq (Shortest
Path Bridging) and much of the IEEE 802.1d standard.
802.1a VLAN interfaces are represented as virtual sub-interfaces in VyOS. The
term used for this is ``vif``. Configuration of a tagged sub-interface is
accomplished using the configuration command:
``set interfaces ethernet <name> vif <vlan-id>``
To assign a vif 100 using the VLAN 100 tag to physical interface eth1 use:
.. code-block:: none
set interfaces ethernet eth1 vif 100 description 'VLAN 100'
set interfaces ethernet eth1 vif 100 address '192.168.100.1/24'
set interfaces ethernet eth1 vif 100 address '2001:db8:100::1/64'
Resulting in:
.. code-block:: none
ethernet eth1 {
address 192.168.100.1/24
address 2001:db8:100::1/64
description INSIDE
duplex auto
hw-id 00:53:29:44:3b:19
smp_affinity auto
speed auto
vif 100 {
address 192.168.100.1/24
description "VLAN 100"
}
}
VLAN interfaces are shown as `<name>.<vlan-id>`, e.g. `eth1.100`:
.. code-block:: none
vyos@vyos:~$ show interfaces
Codes: S - State, L - Link, u - Up, D - Down, A - Admin Down
Interface IP Address S/L Description
--------- ---------- --- -----------
eth0 172.16.51.129/24 u/u OUTSIDE
eth1 192.168.0.1/24 u/u INSIDE
eth1.100 192.168.100.1/24 u/u VLAN 100
lo 127.0.0.1/8 u/u
::1/128
|
