Dropping incomplete German manpage translations.

9 files changed, 0 insertions, 1411 deletions

diff --git a/manpages/de/lb.de.1 b/manpages/de/lb.de.1
deleted file mode 100644
index 3eedd7cef..000000000
--- a/manpages/de/lb.de.1
+++ /dev/null
@@ -1,48 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb\fP \- wrapper for live\-build programs
-
-.SH SYNOPSIS
-\fBlb\fP COMMAND [COMMAND_OPTIONS]
-.PP
-\fBlb\fP [\fIlive\-build\ options\fP]
-
-.SH DESCRIPTION
-\fBlb\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the live
-systems tool suite.
-.PP
-
-.\" FIXME
-.SH OPTIONS
-\fBlb\fP has no specific options but understands all generic live\-build
-options. See \fIlive\-build\fP(7) for a complete list of all generic live\-build
-options.
-
-.SH FILES
-.IP \fBnone\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_binary.de.1 b/manpages/de/lb_binary.de.1
deleted file mode 100644
index 49d499f14..000000000
--- a/manpages/de/lb_binary.de.1
+++ /dev/null
@@ -1,47 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb binary\fP \- Complete the binary stage
-
-.SH SYNOPSIS
-\fBlb binary\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb binary\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-\fBlb binary\fP calls all necessary live\-build programs in the correct order to
-complete the binary stage.
-
-.SH OPTIONS
-\fBlb binary\fP has no specific options but understands all generic live\-build
-options. See \fIlive\-build\fP(7) for a complete list of all generic live\-build
-options.
-
-.SH FILES
-.IP \fBnone\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_bootstrap.de.1 b/manpages/de/lb_bootstrap.de.1
deleted file mode 100644
index 3b7c63913..000000000
--- a/manpages/de/lb_bootstrap.de.1
+++ /dev/null
@@ -1,47 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb bootstrap\fP \- Complete the bootstrap stage
-
-.SH SYNOPSIS
-\fBlb bootstrap\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb bootstrap\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-\fBlb bootstrap\fP calls all necessary live\-build programs in the correct order
-to complete the bootstrap stage.
-
-.SH OPTIONS
-\fBlb bootstrap\fP has no specific options but understands all generic
-live\-build options. See \fIlive\-build\fP(7) for a complete list of all generic
-live\-build options.
-
-.SH FILES
-.IP \fBnone\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_build.de.1 b/manpages/de/lb_build.de.1
deleted file mode 100644
index 0c74d73cd..000000000
--- a/manpages/de/lb_build.de.1
+++ /dev/null
@@ -1,49 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb build\fP \- Complete the bootstrap, chroot, binary, and source stages
-
-.SH SYNOPSIS
-\fBlb build\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb build\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-\fBlb build\fP calls all necessary live\-build programs in the correct order to
-complete the bootstrap, chroot, binary, and source stages.
-
-.SH OPTIONS
-\fBlb build\fP has no specific options but understands all generic live\-build
-options. See \fIlive\-build\fP(7) for a complete list of all generic live\-build
-options.
-
-.SH FILES
-.\" FIXME
-.IP \fBauto/build\fP 4
-
-.\" FIXME
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_chroot.de.1 b/manpages/de/lb_chroot.de.1
deleted file mode 100644
index 1114fbcab..000000000
--- a/manpages/de/lb_chroot.de.1
+++ /dev/null
@@ -1,47 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb chroot\fP \- Complete the chroot stage
-
-.SH SYNOPSIS
-\fBlb chroot\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb chroot\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-\fBlb chroot\fP calls all necessary live\-build programs in the correct order to
-complete the chroot stage.
-
-.SH OPTIONS
-\fBlb chroot\fP has no specific options but understands all generic live\-build
-options. See \fIlive\-build\fP(7) for a complete list of all generic live\-build
-options.
-
-.SH FILES
-.IP \fBnone\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_clean.de.1 b/manpages/de/lb_clean.de.1
deleted file mode 100644
index 30c31d7a6..000000000
--- a/manpages/de/lb_clean.de.1
+++ /dev/null
@@ -1,73 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb clean\fP \- Clean build directory
-
-.SH SYNOPSIS
-\fBlb clean\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb clean\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-.\" FIXME
-.\" FIXME
-\fBlb clean\fP is responsible for cleaning up after a system is built. It
-removes the build directories, and removes some other files including stage
-files, and any detritus left behind by other live\-build commands.
-
-.SH OPTIONS
-In addition to its specific options \fBlb clean\fP understands all generic
-live\-build options. See \fIlive\-build\fP(7) for a complete list of all generic
-live\-build options.
-.PP
-.\" FIXME
-.IP \fB\-\-all\fP 4
-removes chroot, binary, stage, and source. The cache directory is kept. This
-is the default operation and will be performed if no argument is given.
-.IP \fB\-\-cache\fP 4
-removes the cache directories.
-.IP \fB\-\-chroot\fP 4
-unmounts and removes the chroot directory.
-.IP \fB\-\-binary\fP 4
-removes all binary related caches, files, directories, and stages files.
-.IP \fB\-\-purge\fP 4
-removes everything, including all caches. The config directory is kept.
-.IP \fB\-\-remove\fP 4
-removes everything, including package cache but not stage cache. The config
-directory is kept.
-.IP \fB\-\-stage\fP 4
-removes all stage files.
-.IP \fB\-\-source\fP 4
-.\" FIXME
-removes all source related caches, files, directories, and stage files.
-
-.SH FILES
-.\" FIXME
-.IP \fBauto/clean\fP 4
-
-.\" FIXME
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_config.de.1 b/manpages/de/lb_config.de.1
deleted file mode 100644
index 640a74f40..000000000
--- a/manpages/de/lb_config.de.1
+++ /dev/null
@@ -1,767 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb config\fP \- Create config directory
-
-.SH SYNOPSIS
-\fBlb config\fP [\fIlive\-build options\fP]
-.PP
-.\" FIXME
-\fBlb config\fP
-.br
-  [\fB\-\-apt\fP apt|aptitude]
-.br
-  [\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP]
-.br
-  [\fB\-\-apt\-http\-proxy\fP \fIURL\fP]
-.br
-  [\fB\-\-apt\-indices\fP true|false]
-.br
-  [\fB\-\-apt\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
-.br
-  [\fB\-\-aptitude\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
-.br
-  [\fB\-\-apt\-pipeline\fP \fIDEPTH\fP]
-.br
-  [\fB\-\-apt\-recommends\fP true|false]
-.br
-  [\fB\-\-apt\-secure\fP true|false]
-.br
-  [\fB\-\-apt\-source\-archives\fP true|false]
-.br
-  [\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP]
-.br
-  [\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd]
-.br
-  [\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4]
-.br
-  [\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP]
-.br
-  [\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\fI"PARAMETERS"\fP]
-.br
-  [\fB\-\-bootloader\fP grub|syslinux]
-.br
-  [\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap]
-.br
-  [\fB\-\-cache\fP true|false]
-.br
-  [\fB\-\-cache\-indices\fP true|false]
-.br
-  [\fB\-\-cache\-packages\fP true|false]
-.br
-  [\fB\-\-cache\-stages\fP \fISTAGE\fP|\fI"STAGES"\fP]
-.br
-  [\fB\-\-checksums\fP md5|sha1|sha256|none]
-.br
-  [\fB\-\-compression\fP bzip2|gzip|lzip|none]
-.br
-  [\fB\-\-config\fP \fIGIT_URL::GIT_ID\fP]
-.br
-  [\fB\-\-build\-with\-chroot\fP true|false]
-.br
-  [\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none]
-.br
-  [\fB\-\-clean\fP]
-.br
-  [\-c|\fB\-\-conffile\fP \fIFILE\fP]
-.br
-  [\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline]
-.br
-  [\fB\-\-debconf\-priority\fP low|medium|high|critical]
-.br
-  [\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false]
-.br
-  [\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP]
-.br
-  [\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP]
-.br
-  [\fB\-\-debian\-installer\-gui\fP true|false]
-.br
-  [\fB\-\-debug\fP]
-.br
-  [\-d|\fB\-\-distribution\fP \fICODENAME\fP]
-.br
-  [\fB\-\-parent\-distribution\fP \fICODENAME\fP]
-.br
-  [\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP]
-.br
-  [\fB\-\-dump\fP]
-.br
-  [\fB\-\-fdisk\fP fdisk|fdisk.dist]
-.br
-  [\fB\-\-firmware\-binary true|false\fP]
-.br
-  [\fB\-\-firmware\-chroot true|false\fP]
-.br
-  [\fB\-\-force\fP]
-.br
-  [\fB\-\-grub\-splash\fP \fIFILE\fP]
-.br
-  [\fB\-\-gzip\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
-.br
-  [\fB\-\-hooks\fP \fIFILE\fP]
-.br
-  [\fB\-\-ignore\-system\-defaults\fP]
-.br
-  [\fB\-\-initramfs\fP auto|none|live\-boot|casper]
-.br
-  [\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]
-.br
-  [\fB\-\-initsystem\fP sysvinit|runit|systemd|upstart|none]
-.br
-  [\fB\-\-interactive\fP shell]
-.br
-  [\fB\-\-isohybrid\-options\fP \fIOPTION\fP|"\fIOPTIONS\fP"]
-.br
-  [\fB\-\-iso\-application\fP \fINAME\fP]
-.br
-  [\fB\-\-iso\-preparer\fP \fINAME\fP]
-.br
-  [\fB\-\-iso\-publisher\fP \fINAME\fP]
-.br
-  [\fB\-\-iso\-volume\fP \fINAME\fP]
-.br
-  [\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP]
-.br
-  [\fB\-\-keyring\-packages\fP \fIPACKAGE|"PACKAGES"\fP]
-.br
-  [\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\fI"FLAVOURS"\fP]
-.br
-  [\fB\-\-linux\-packages\fP \fI"PACKAGES"\fP]
-.br
-  [\fB\-\-losetup\fP losetup|losetup.orig]
-.br
-  [\fB\-\-memtest\fP memtest86+|memtest86|none]
-.br
-  [\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-binary\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP]
-.br
-  [\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-bootstrap\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-chroot\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-chroot\-security\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-binary\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-binary\-security\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-binary\-updates\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-binary\-backports\fP \fIURL\fP]
-.br
-  [\fB\-\-mirror\-debian\-installer\fP \fIURL\fP]
-.br
-  [\fB\-\-mode\fP debian|progress\-linux|ubuntu]
-.br
-  [\fB\-\-system\fP live|normal]
-.br
-  [\fB\-\-net\-root\-filesystem\fP nfs|cfs]
-.br
-  [\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP]
-.br
-  [\fB\-\-net\-root\-path\fP \fIPATH\fP]
-.br
-  [\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP]
-.br
-  [\fB\-\-net\-cow\-filesystem\fP nfs|cfs]
-.br
-  [\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP]
-.br
-  [\fB\-\-net\-cow\-path\fP \fIPATH\fP]
-.br
-  [\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP]
-.br
-  [\fB\-\-net\-tarball\fP true|false]
-.br
-  [\fB\-\-quiet\fP]
-.br
-  [\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\fI"ARCHIVE_AREAS"\fP]
-.br
-  [\fB\-\-parent\-archive\-areas\fP
-\fIPARENT_ARCHIVE_AREA\fP|\fI"PARENT_ARCHIVE_AREAS"\fP]
-.br
-  [\fB\-\-security\fP true|false]
-.br
-  [\fB\-\-source\fP true|false]
-.br
-  [\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd]
-.br
-  [\fB\-\-tasksel\fP apt|aptitude|tasksel]
-.br
-  [\fB\-\-templates\fP \fIPATH\fP]
-.br
-  [\fB\-\-hdd\-size \fP\fIMB\fP]
-.br
-  [\fB\-\-updates\fP true|false]
-.br
-  [\fB\-\-backports\fP true|false]
-.br
-  [\fB\-\-verbose\fP]
-.br
-.\" FIXME
-  [\fB\-\-win32\-loader true|false]\fP
-
-.SH DESCRIPTION
-\fBlb config\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-.\" FIXME
-\fBlb config\fP populates the configuration directory for live\-build. By
-default, this directory is named 'config' and is created in the current
-directory where \fBlb config\fP was executed.
-.PP
-.\" FIXME
-Note: Currently \fBlb config\fP tries to be smart and sets defaults for some
-options depending on the setting of other options (e.g. which linux packages
-to be used depending on if a wheezy system gets build or not). This means
-that when generating a new configuration, you should call \fBlb config\fP only
-once with all options specified. Calling it several times with only a subset
-of the options each can result in non working configurations. This is also
-caused by the fact that \fBlb config\fP called with one option only changes
-that option, and leaves everything else as is unless its not
-defined. However, \fBlb config\fP does warn about know impossible or likely
-impossible combinations that would lead to non working live systems. If
-unsure, remove config/{binary,bootstrap,chroot,common,source} and call \fBlb
-config\fP again.
-
-.SH OPTIONS
-In addition to its specific options \fBlb config\fP understands all generic
-live\-build options. See \fIlive\-build\fP(7) for a complete list of all generic
-live\-build options.
-.PP
-.\" FIXME
-.IP "\fB\-\-apt\fP apt|aptitude" 4
-defines if apt\-get or aptitude is used to install packages when building the
-image. The default is apt.
-.IP "\fB\-\-apt\-ftp\-proxy\fP \fIURL\fP" 4
-sets the ftp proxy to be used by apt. By default, this is empty. Note that
-this variable is only for the proxy that gets used by apt internally within
-the chroot, it is not used for anything else.
-.IP "\fB\-\-apt\-http\-proxy\fP \fIURL\fP" 4
-sets the http proxy to be used by apt. By default, this is empty. Note that
-this variable is only for the proxy that gets used by apt internally within
-the chroot, it is not used for anything else.
-.IP "\fB\-\-apt\-indices\fP true|false|none" 4
-defines if the resulting images should have apt indices or not and defaults
-to true. If set to none, no indices are included at all.
-.IP "\fB\-\-apt\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
-defines the default options that will be appended to every apt call that is
-made inside chroot during the building of the image. By default, this is set
-to \-\-yes to allow non\-interactive installation of packages.
-.IP "\fB\-\-aptitude\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
-defines the default options that will be appended to every aptitude call
-that is made inside chroot during building of the image. By default, this is
-set to \-\-assume\-yes to allow non\-interactive installation of packages.
-.IP "\fB\-\-apt\-pipeline\fP \fIDEPTH\fP" 4
-sets the depth of the apt/aptitude pipeline. In cases where the remote
-server is not RFC conforming or buggy (such as Squid 2.0.2) this option can
-be a value from 0 to 5 indicating how many outstanding requests APT should
-send. A value of zero MUST be specified if the remote host does not properly
-linger on TCP connections \- otherwise data corruption will occur. Hosts
-which require this are in violation of RFC 2068. By default, live\-build does
-not set this option.
-.IP "\fB\-\-apt\-recommends\fP true|false" 4
-defines if apt should install recommended packages automatically. By
-default, this is true.
-.IP "\fB\-\-apt\-secure\fP true|false" 4
-defines if apt should check repository signatures. This is true by default.
-.IP "\fB\-\-apt\-source\-archives\fP true|false" 4
-defines if deb\-src entries should be included in the resulting live image or
-not, defaults to on.
-.IP "\-a|\fB\-\-architectures\fP \fIARCHITECTURE\fP" 4
-defines the architecture of the to be build image. By default, this is set
-to the host architecture. Note that you cannot crossbuild for another
-architecture if your host system is not able to execute binaries for the
-target architecture natively. For example, building amd64 images on i386 and
-vice versa is possile if you have a 64bit capable i386 processor and the
-right kernel. But building powerpc images on an i386 system is not possible.
-.IP "\-b|\fB\-\-binary\-images\fP iso|iso\-hybrid|netboot|tar|hdd" 4
-defines the image type to build. By default, for images using syslinux this
-is set to iso\-hybrid to build CD/DVD images that may also be used like hdd
-images, for non\-syslinux images, it defaults to iso.
-.IP "\fB\-\-binary\-filesystem\fP fat16|fat32|ext2|ext3|ext4" 4
-defines the filesystem to be used in the image type. This only has an effect
-if the selected binary image type does allow to choose a filesystem. For
-example, when selection iso the resulting CD/DVD has always the filesystem
-ISO9660. When building hdd images for usb sticks, this is active. Note that
-it defaults to fat16 on all architectures except sparc where it defaults to
-ext4. Also note that if you choose fat16 and your resulting binary image
-gets bigger than 2GB, the binary filesystem automatically gets switched to
-fat32.
-.IP "\fB\-\-bootappend\-install\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4
-sets boot parameters specific to debian\-installer, if included.
-.IP "\fB\-\-bootappend\-live\fP \fIPARAMETER\fP|\(dq\fIPARAMETERS\fP\(dq" 4
-sets boot parameters specific to debian\-live. A complete list of boot
-parameters can be found in the \fIlive\-boot\fP(7) and \fIlive\-config\fP(7) manual
-pages.
-.IP "\fB\-\-bootloader\fP grub|syslinux" 4
-defines which bootloader is beeing used in the generated image. This has
-only an effect if the selected binary image type does allow to choose the
-bootloader. For example, if you build a iso, always syslinux (or more
-precise, isolinux) is being used. Also note that some combinations of binary
-images types and bootloaders may be possible but live\-build does not support
-them yet. \fBlb config\fP will fail to create such a not yet supported
-configuration and give a explanation about it. For hdd images on amd64 and
-i386, the default is syslinux.
-.IP "\fB\-\-bootstrap\fP cdebootstrap|cdebootstrap\-static|debootstrap" 4
-defines which program is used to bootstrap the debian chroot, default is
-debootstrap.
-.IP "\fB\-\-cache\fP true|false" 4
-defines globally if any cache should be used at all. Different caches can be
-controled through the their own options.
-.IP "\fB\-\-cache\-indices\fP true|false" 4
-defines if downloaded package indices and lists should be cached which is
-false by default. Enabling it would allow to rebuild an image completely
-offline, however, you would not get updates anymore then.
-.IP "\fB\-\-cache\-packages\fP true|false" 4
-defines if downloaded packages files should be cached which is true by
-default. Disabling it does save space consumtion in your build directory,
-but remember that you will cause much unnecessary traffic if you do a couple
-of rebuilds. In general you should always leave it true, however, in some
-particular rare build setups, it can be faster to refetch packages from the
-local network mirror rather than to utilize the local disk.
-.IP "\fB\-\-cache\-stages\fP true|false|\fISTAGE\fP|\(dq\fISTAGES\fP\(dq" 4
-sets which stages should be cached. By default set to bootstrap. As an
-exception to the normal stage names, also rootfs can be used here which does
-only cache the generated root filesystem in
-filesystem.{dir,ext*,squashfs}. This is useful during development if you
-want to rebuild the binary stage but not regenerate the root filesystem all
-the time.
-.IP "\fB\-\-checksums\fP md5|sha1|sha256|none" 4
-defines if the binary image should contain a file called md5sums.txt,
-sha1sums.txt and/or sha256sums.txt. These lists all files on the image
-together with their checksums. This in turn can be used by live\-boots
-built\-in integrity\-check to verify the medium if specified at boot
-prompt. In general, this should not be false and is an important feature of
-live system released to the public. However, during development of very big
-images it can save some time by not calculating the checksums.
-.IP "\fB\-\-compression\fP bzip2|gzip|lzip|none" 4
-defines the compression program to be used to compress tarballs. Defaults to
-gzip.
-.IP "\fB\-\-config\fP \fIGIT_URL\fP::\fIGIT_ID\fP" 4
-allows to bootstrap a config tree from a git repositories, optionally
-appended by a Git Id (branch, commit, tag, etc.).
-.IP "\fB\-\-build\-with\-chroot\fP true|false" 4
-defines whetever live\-build should use the tools from within the chroot to
-build the binary image or not by using and including the host systems
-tools. This is a very dangerous option, using the tools of the host system
-can lead to tainted and even non\-bootable images if the host systems version
-of the required tools (mainly these are the bootloaders such as syslinux and
-grub, and the auxilliary tools such as dosfstools, xorriso, squashfs\-tools
-and others) do not \fBexactely\fP match what is present at build\-time in the
-target distribution. Never do disable this option unless you are \fBexactely\fP
-sure what you are doing and have \fBcompletely\fP\fI understood its
-consequences.\fP
-.IP "\fB\-\-chroot\-filesystem\fP ext2|ext3|ext4|squashfs|jffs2|none" 4
-defines which filesystem type should be used for the root filesystem
-image. If you use none, then no filesystem image is created and the root
-filesystem content is copied on the binary image filesystem as flat
-files. Depending on what binary filesystem you have choosen, it may not be
-possible to build with such a plain root filesystem, e.g. fat16/fat32 will
-not work as linux does not support to run directly on them.
-.IP \fB\-\-clean\fP 4
-minimizes config directory by automatically removing unused and thus empty
-subdirectories.
-.IP "\-c|\fB\-\-conffile\fP \fIFILE\fP" 4
-using a user specified alternative configuration file in addition to the
-normally used one in the config directory.
-.IP "\fB\-\-debconf\-frontend\fP dialog|editor|noninteractive|readline" 4
-defines what value the debconf frontend should be set to inside the
-chroot. Note that setting it to anything by noninteractive, which is the
-default, makes your build asking questions during the build.
-.IP "\fB\-\-debconf\-priority\fP low|medium|high|critical" 4
-defines what value the debconf priority shoul dbe set to inside the
-chroot. By default, it is set to critical, which means that almost no
-questions are displayed. Note that this only has an effect if you use any
-debconf frontend different from noninteractive.
-.IP "\fB\-\-debian\-installer\fP true|cdrom|netinst|netboot|businesscard|live|false" 4
-defines which type, if any, of the debian\-installer should be included in
-the resulting binary image. By default, no installer is included. All
-available flavours except live are the identical configurations used on the
-installer media produced by regular debian\-cd. When live is choosen, the
-live\-installer udeb is included so that debian\-installer will behave
-different than usual \- instead of installing the debian system from packages
-from the medium or the network, it installs the live system to the disk.
-.IP "\fB\-\-debian\-installer\-distribution\fP daily|\fICODENAME\fP" 4
-defines the distribution where the debian\-installer files should be taken
-out from. Normally, this should be set to the same distribution as the live
-system. However, some times, one wants to use a newer or even daily built
-installer.
-.IP "\fB\-\-debian\-installer\-preseedfile\fP \fIFILE\fP|\fIURL\fP" 4
-sets the filename or URL for an optionally used and included preseeding file
-for debian\-installer. If config/binary_debian\-installer/preseed.cfg exists,
-it will be used by default.
-.IP "\fB\-\-debian\-installer\-gui\fP true|false" 4
-defines if the debian\-installer graphical GTK interface should be true or
-not. In Debian mode and for most versions of Ubuntu, this option is true,
-whereas otherwise false, by default.
-.IP \fB\-\-debug\fP 4
-turn on debugging informational messages.
-.IP "\-d|\fB\-\-distribution\fP \fICODENAME\fP" 4
-defines the distribution of the resulting live system.
-.IP "\-d|\fB\-\-parent\-distribution\fP \fICODENAME\fP" 4
-defines the parent distribution for derivatives of the resulting live
-system.
-.IP "\-d|\fB\-\-parent\-debian\-installer\-distribution\fP \fICODENAME\fP" 4
-defines the parent debian\-installer distribution for derivatives of the
-resulting live system.
-.IP \fB\-\-dump\fP 4
-prepares a report of the currently present live system configuration and the
-version of live\-build used. This is useful to provide if you submit bug
-reports, we do get all informations required for us to locate and replicate
-an error.
-.IP "\fB\-\-fdisk\fP fdisk|fdisk.dist" 4
-sets the filename of the fdisk binary from the host system that should be
-used. This is autodetected and does generally not need any customization.
-.IP \fB\-\-force\fP 4
-forces re\-execution of already run stages. Use only if you know what you are
-doing. It is generally safer to use \fBlb clean\fP to clean up before
-re\-executing \fBlb build\fP.
-.IP "\fB\-\-grub\-splash\fP \fIFILE\fP" 4
-defines the name of an optional to be included splash screen graphic for the
-grub bootloader.
-.IP "\fB\-\-gzip\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
-defines the default options that will be appended to (almost) every gzip
-call during the building of the image. By default, this is set to \-\-best to
-use highest (but slowest) compression. Dynamically, if the host system
-supports it, also \-\-rsyncable is added.
-.IP "\fB\-\-hooks\fP \fIFILE\fP" 4
-defines which hooks available in /usr/share/live/build/examples/hooks should
-be activated. Normally, there are no hooks executed. Make sure you know and
-understood the hook before you enable it.
-.IP \fB\-\-ignore\-system\-defaults\fP 4
-\fBlb config\fP by default reads system defaults from \fI/etc/live/build.conf\fP
-and \fI/etc/live/build/*\fP when generating a new live system config
-directory. This is useful if you want to set global settings, such as mirror
-locations, and don't want to specify them all of the time.
-.IP "\fB\-\-initramfs\fP auto|none|live\-boot|casper" 4
-sets the name of package that contains the live system specific initramfs
-modification. By default, auto is used, which means that at build time of
-the image rather than on configuration time, the value will be expanded to
-casper when building ubuntu systems, to live\-boot for all other
-systems. Using 'none' is useful if the resulting system image should not be
-a live image (experimental).
-.IP "\fB\-\-initramfs\-compression\fP bzip2|gzip|lzma]"
-defines the compression program to be used to compress the
-initramfs. Defaults to gzip.
-.IP "\fB\-\-interactive\fP shell" 4
-defines if after the chroot stage and before the beginning of the binary
-stage, a interactive shell login should be spawned in the chroot in order to
-allow you to do manual customizations. Once you close the shell with logout
-or exit, the build will continue as usual. Note that it's strongly
-discouraged to use this for anything else than testing. Modifications that
-should be present in all builds of a live system should be properly made
-through hooks. Everything else destroys the beauty of being able to
-completely automatise the build process and making it non interactive. By
-default, this is of course false.
-.IP "\fB\-\-isohybrid\-options\fP \fIOPTION\fP|\(dq\fIOPTIONS\fP\(dq" 4
-defines options to pass to isohybrid.
-.IP "\fB\-\-iso\-application\fP \fINAME\fP" 4
-sets the APPLICATION field in the header of a resulting CD/DVD image and
-defaults to "Debian Live" in debian mode, and "Ubuntu Live" in ubuntu mode.
-.IP "\fB\-\-iso\-preparer\fP \fINAME\fP" 4
-sets the PREPARER field in the header of a resulting CD/DVD image. By
-default this is set to "live\-build \fIVERSION\fP;
-http://packages.qa.debian.org/live\-build", whereas VERSION is expanded to
-the version of live\-build that was used to build the image.
-.IP "\fB\-\-iso\-publisher\fP \fINAME\fP" 4
-sets the PUBLISHED field in the header of a resulting CD/DVD image. By
-default, this is set to 'Live Systems project; http:/live\-systems.org/;
-debian\-live@lists.debian.org'. Remember to change this to the appropriate
-values at latest when you distributing custom and unofficial images.
-.IP "\fB\-\-iso\-volume\fP \fINAME\fP" 4
-sets the VOLUME field in the header of a resulting CD/DVD and defaults to
-\&'(\fIMODE\fP) (\fIDISTRIBUTION\fP) (\fIDATE\fP)' whereas MODE is expanded to the name
-of the mode in use, DISTRIBUTION the distribution name, and DATE with the
-current date and time of the generation.
-.IP "\fB\-\-jffs2\-eraseblock\fP \fISIZE\fP" 4
-sets the eraseblock size for a JFFS2 (Second Journalling Flash File System)
-filesystem. The default is 64 KiB. If you use an erase block size different
-than the erase block size of the target MTD device, JFFS2 may not perform
-optimally. If the SIZE specified is below 4096, the units are assumed to be
-KiB.
-.IP "\fB\-\-keyring\-packages\fP \fIPACKAGE|\(dqPACKAGES\fP\(dq" 4
-sets the keyring package or additional keyring packages. By default this is
-set to debian\-archive\-keyring.
-.IP "\-k|\fB\-\-linux\-flavours\fP \fIFLAVOUR\fP|\(dq\fIFLAVOURS\fP\(dq" 4
-sets the kernel flavours to be installed. Note that in case you specify more
-than that the first will be configured the default kernel that gets booted.
-.IP "\fB\-\-linux\-packages\fP \(dq\fIPACKAGES\fP\(dq" 4
-sets the internal name of the kernel packages naming scheme. If you use
-debian kernel packages, you will not have to adjust it. If you decide to use
-custom kernel packages that do not follow the debian naming scheme, remember
-to set this option to the stub of the packages only (for debian this is
-linux\-image\-2.6), so that \fISTUB\fP\-\fIFLAVOUR\fP results in a valid package name
-(for debian e.g. linux\-image\-2.6\-486). Preferably you use the meta package
-name, if any, for the stub, so that your configuration is ABI
-independent. Also don't forget that you have to include stubs of the binary
-modules packages for unionfs or aufs, and squashfs if you built them
-out\-of\-tree.
-.IP "\fB\-\-losetup\fP losetup|losetup.orig" 4
-sets the filename of the losetup binary from the host system that should be
-used. This is autodetected and does generally not need any customization.
-.IP "\fB\-\-memtest\fP memtest86+|memtest86|none" 4
-defines if memtest, memtest86+ or no memory tester at all should be included
-as secondary bootloader configuration. This is only available on amd64 and
-i386 and defaults to memtest86+.
-.IP "\-m|\fB\-\-parent\-mirror\-bootstrap\fP \fIURL\fP" 4
-sets the location of the debian package mirror that should be used to
-bootstrap from. This defaults to http://ftp.de.debian.org/debian/ which may
-not be a good default if you live outside of Europe.
-.IP "\fB\-\-parent\-mirror\-chroot\fP \fIURL\fP" 4
-sets the location of the debian package mirror that will be used to fetch
-the packages in order to build the live system. By default, this is set to
-the value of \-\-parent\-mirror\-bootstrap.
-.IP "\fB\-\-parent\-mirror\-chroot\-security\fP \fIURL\fP" 4
-sets the location of the debian security package mirror that will be used to
-fetch the packages in order to build the live system. By default, this
-points to http://security.debian.org/debian/.
-.IP "\fB\-\-parent\-mirror\-chroot\-updates\fP \fIURL\fP" 4
-sets the location of the debian updates package mirror that will be used to
-fetch packages in order to build the live system. By default, this is set to
-the value of \-\-parent\-mirror\-chroot.
-.IP "\fB\-\-parent\-mirror\-chroot\-backports\fP \fIURL\fP" 4
-sets the location of the debian backports package mirror that will be used
-to fetch packages in order to build the live system. By default, this points
-to http://backports.debian.org/debian\-backports/.
-.IP "\fB\-\-parent\-mirror\-binary\fP \fIURL\fP" 4
-sets the location of the debian package mirror that should end up configured
-in the final image and which is the one a user would see and use. This has
-not necessarily to be the same that is used to build the image, e.g. if you
-use a local mirror but want to have an official mirror in the image. By
-default, 'http://http.debian.net/debian/' is used.
-.IP "\fB\-\-parent\-mirror\-binary\-security\fP \fIURL\fP" 4
-sets the location of the debian security package mirror that should end up
-configured in the final image. By default, 'http://security.debian.org/' is
-used.
-.IP "\fB\-\-parent\-mirror\-binary\-updates\fP \fIURL\fP" 4
-sets the location of the debian updates package mirror that should end up
-configured in the final image. By default, the value of
-\-\-parent\-mirror\-binary is used.
-.IP "\fB\-\-parent\-mirror\-binary\-backports\fP \fIURL\fP" 4
-sets the location of the debian backports package mirror that should end up
-configured in the final image. By default,
-\&'http://backports.debian.org/debian\-backports/' is used.
-.IP "\fB\-\-parent\-mirror\-debian\-installer\fP \fIURL\fP" 4
-sets the location of the mirror that will be used to fetch the debian
-installer images. By default, this points to the same mirror used to build
-the live system, i.e. the value of \-\-parent\-mirror\-bootstrap.
-.IP "\fB\-\-mirror\-bootstrap\fP \fIURL\fP" 4
-sets the location of the debian package mirror that should be used to
-bootstrap the derivative from. This defaults to
-http://ftp.de.debian.org/debian/ which may not be a good default if you live
-outside of Europe.
-.IP "\fB\-\-mirror\-chroot\fP \fIURL\fP" 4
-sets the location of the debian package mirror that will be used to fetch
-the packages of the derivative in order to build the live system. By
-default, this is set to the value of \-\-mirror\-bootstrap.
-.IP "\fB\-\-mirror\-chroot\-security\fP \fIURL\fP" 4
-sets the location of the debian security package mirror that will be used to
-fetch the packages of the derivative in order to build the live system. By
-default, this points to http://security.debian.org/debian/.
-.IP "\fB\-\-mirror\-chroot\-updates\fP \fIURL\fP" 4
-sets the location of the debian updates package mirror that will be used to
-fetch packages of the derivative in order to build the live system. By
-default, this is set to the value of \-\-mirror\-chroot.
-.IP "\fB\-\-mirror\-chroot\-backports\fP \fIURL\fP" 4
-sets the location of the debian backports package mirror that will be used
-to fetch packages of the derivative in order to build the live system. By
-default, this points to http://backports.debian.org/debian\-backports/.
-.IP "\fB\-\-mirror\-binary\fP \fIURL\fP" 4
-sets the location of the derivative package mirror that should end up
-configured in the final image and which is the one a user would see and
-use. This has not necessarily to be the same that is used to build the
-image, e.g. if you use a local mirror but want to have an official mirror in
-the image.
-.IP "\fB\-\-mirror\-binary\-security\fP \fIURL\fP" 4
-sets the location of the derivatives security package mirror that should end
-up configured in the final image.
-.IP "\fB\-\-mirror\-binary\-updates\fP \fIURL\fP" 4
-sets the location of the derivatives updates package mirror that should end
-up configured in the final image.
-.IP "\fB\-\-mirror\-binary\-backports\fP \fIURL\fP" 4
-sets the location of the derivatives backports package mirror that should
-end up configured in the final image.
-.IP "\fB\-\-mirror\-debian\-installer\fP \fIURL\fP" 4
-sets the location of the mirror that will be used to fetch the debian
-installer images of the derivative. By default, this points to the same
-mirror used to build the live system, i.e. the value of \-\-mirror\-bootstrap.
-.IP "\fB\-\-mode\fP debian|progress|ubuntu" 4
-defines a global mode to load project specific defaults. By default this is
-set to debian.
-.IP "\fB\-\-system\fP live|normal" 4
-defines if the resulting system image should a live system or a normal,
-non\-live system.
-.IP "\fB\-\-net\-root\-filesystem\fP nfs|cfs" 4
-defines the filesystem that will be configured in the bootloader
-configuration for your netboot image. This defaults to nfs.
-.IP "\fB\-\-net\-root\-mountoptions\fP \fIOPTIONS\fP" 4
-sets additional options for mounting the root filesystem in netboot images
-and is by default empty.
-.IP "\fB\-\-net\-root\-path\fP \fIPATH\fP" 4
-sets the file path that will be configured in the bootloader configuration
-for your netboot image. This defaults to /srv/debian\-live in debian mode,
-and /srv/ubuntu\-live when in ubuntu mode.
-.IP "\fB\-\-net\-root\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4
-sets the IP or hostname that will be configured in the bootloader
-configuration for the root filesystem of your netboot image. This defaults
-to 192.168.1.1.
-.IP "\fB\-\-net\-cow\-filesystem\fP nfs|cfs" 4
-defines the filesystem type for the copy\-on\-write layer and defaults to nfs.
-.IP "\fB\-\-net\-cow\-mountoptions\fP \fIOPTIONS\fP" 4
-sets additional options for mounting the copy\-on\-write layer in netboot
-images and is by default empty.
-.IP "\fB\-\-net\-cow\-path\fP \fIPATH\fP" 4
-defines the path to client writable filesystem. Anywhere that
-\fIclient_mac_address\fP is specified in the path live\-boot will substitute the
-MAC address of the client delimited with hyphens.
-.PP
-.IP "" 4
-Example:
-.br
-/export/hosts/client_mac_address
-.br
-/export/hosts/00\-16\-D3\-33\-92\-E8
-.IP "\fB\-\-net\-cow\-server\fP \fIIP\fP|\fIHOSTNAME\fP" 4
-sets the IP or hostname that will be configured in the bootloader
-configuration for the copy\-on\-write filesystem of your netboot image and is
-by default empty.
-.IP "\fB\-\-net\-tarball\fP true|false" 4
-defines if a compressed tarball should be created. Disabling this options
-leads to no tarball at all, the plain binary directory is considered the
-output in this case. Default is true.
-.IP \fB\-\-quiet\fP 4
-reduces the verbosity of messages output by \fBlb build\fP.
-.IP "\fB\-\-archive\-areas\fP \fIARCHIVE_AREA\fP|\(dq\fIARCHIVE_AREAS\fP\(dq" 4
-defines which package archive areas of a debian packages archive should be
-used for configured debian package mirrors. By default, this is set to
-main. Remember to check the licenses of each packages with respect to their
-redistributability in your juristiction when enabling contrib or non\-free
-with this mechanism.
-.IP "\fB\-\-parent\-archive\-areas\fP \fIPARENT_ARCHIVE_AREA\fP|\(dq\fIPARENT_ARCHIVE_AREAS\fP\(dq" 4
-defines the archive areas for derivatives of the resulting live system.
-.IP "\fB\-\-security\fP true|false" 4
-defines if the security repositories specified in the security mirror
-options should be used or not.
-.IP "\fB\-\-source\fP true|false" 4
-defines if a corresponding source image to the binary image should be
-build. By default this is false because most people do not require this and
-would require to download quite a few source packages. However, once you
-start distributing your live image, you should make sure you build it with a
-source image alongside.
-.IP "\-s|\fB\-\-source\-images\fP iso|netboot|tar|hdd" 4
-defines the image type for the source image. Default is tar.
-.IP "\fB\-\-firmware\-binary\fP true|false" 4
-defines if firmware packages should be automatically included into the
-binary pool for debian\-installer. Note that only firmware packages available
-within the configured archive areas are included, e.g. an image with
-packages from main only will not automatically include firmware from
-non\-free. This option does not interfere with explicitly listed packages in
-binary package lists.
-.IP "\fB\-\-firmware\-chroot\fP true|false" 4
-defines if firmware packages should be automatically included into the live
-image. Note that only firmware packages available within the configured
-archive areas are included, e.g. an image with packages from main only will
-not automatically include firmware from non\-free. This option does not
-interfere with explicitly listed packages in chroot package lists.
-.IP "\fB\-\-swap\-file\-path\fP \fIPATH\fP" 4
-defines the path to a swap file to create in the binary image. Default is
-not to create a swap file.
-.IP "\fB\-\-swap\-file\-size\fP \fIMB\fP" 4
-defines what size in megabytes the swap file should be, if one is to be
-created. Default is 512MB.
-.IP "\fB\-\-tasksel\fP apt|aptitude|tasksel" 4
-selects which program is used to install tasks. By default, this is set to
-tasksel.
-.IP "\fB\-\-templates\fP \fIPATH\fP" 4
-sets the path to the templates that live\-build is going to use, e.g. for
-bootloaders. By default, this is set to /usr/share/live/build/templates/.
-.IP "\fB\-\-hdd\-size\fP MB" 4
-defines what size the hdd image should be. Note that although the default is
-set to 10000 (= 10GB), it will not need 10GB space on your harddisk as the
-files are created as sparse files.
-.IP "\fB\-\-updates\fP true|false" 4
-defines if debian updates package archives should be included in the image
-or not.
-.IP "\fB\-\-backports\fP true|false" 4
-defines if debian backports package archives should be included in the image
-or not.
-.IP \fB\-\-verbose\fP 4
-increases the verbosity of messages output by \fBlb build\fP.
-.IP "\fB\-\-win32\-loader true|false\fP" 4
-.\" FIXME
-defines if win32\-loader should be included in the binary image or not.
-
-.SH ENVIRONMENT
-.\" FIXME
-Currently, command line switches can also be specified through the
-corresponding environment variable. However, this generally should not be
-relied upon, as it is an implementation detail that is subject to change in
-future releases. For options applying directly to live\-build, environment
-variables are named LB_FOO, meaning, e.g. \fB\-\-apt\-ftp\-proxy\fP becomes
-LB_APT_FTP_PROXY (the exception being internal options such as
-\fB\-\-debug\fP). For options passed to another program, as in APT_OPTIONS or
-GZIP_OPTIONS, no LB_ prefix is used.
-
-
-.\" FIXME
-.SH FILES
-.\" FIXME
-.IP \fBauto/config\fP 4
-.IP "\fB/etc/live/build.conf, /etc/live/build/*\fP" 4
-.\" FIXME
-An optional, global configuration file for \fBlb config\fP variables. It is
-useful to specify a few system wide defaults, like
-LB_PARENT_MIRROR_BOOTSTRAP. This feature can be false by specifying the
-\fB\-\-ignore\-system\-defaults\fP option.
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-\fIlive\-boot\fP(7)
-.PP
-\fIlive\-config\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/lb_source.de.1 b/manpages/de/lb_source.de.1
deleted file mode 100644
index 4ef5317f7..000000000
--- a/manpages/de/lb_source.de.1
+++ /dev/null
@@ -1,47 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 1 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlb source\fP \- Complete the source stage
-
-.SH SYNOPSIS
-\fBlb source\fP [\fIlive\-build options\fP]
-
-.SH DESCRIPTION
-\fBlb source\fP is a high\-level command (porcelain) of \fIlive\-build\fP(7), the
-live systems tool suite.
-.PP
-\fBlb source\fP calls all necessary live\-build programs in the correct order to
-complete the source stage.
-
-.SH OPTIONS
-\fBlb source\fP has no specific options but understands all generic live\-build
-options. See \fIlive\-build\fP(7) for a complete list of all generic live\-build
-options.
-
-.SH FILES
-.IP \fBnone\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-build\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.
diff --git a/manpages/de/live-build.de.7 b/manpages/de/live-build.de.7
deleted file mode 100644
index 7d509622d..000000000
--- a/manpages/de/live-build.de.7
+++ /dev/null
@@ -1,286 +0,0 @@
-.\"*******************************************************************
-.\"
-.\" This file was generated with po4a. Translate the source file.
-.\"
-.\"*******************************************************************
-.TH LIVE\-BUILD 7 2014\-08\-28 4.0.1\-1 "Live Systems Project"
-
-.SH NAME
-\fBlive\-build\fP \- the live systems tool suite
-
-.SH SYNOPSIS
-.\" FIXME
-.\" FIXME
-\fBlb \fP\fICOMMAND\fP [\fB\-h|\-\-help\fP] [\fB\-u|\-\-usage\fP] [\fB\-v|\-\-version\fP]
-[\fB\-\-breakpoints\fP] [\fB\-\-conffile\fP] [\fB\-\-debug\fP] [\fB\-\-force\fP] [\fB\-\-quiet\fP]
-[\fB\-\-verbose\fP]
-
-.SH DESCRIPTION
-.\" FIXME
-live\-build is a set of scripts to build live system images. The idea behind
-live\-build is a tool suite that uses a configuration directory to completely
-automate and customize all aspects of building a Live image.
-.PP
-The \fICOMMAND\fP is a name of a live\-build command (see below).
-.PP
-.\" FIXME
-More documentation about how to use live\-build is available in the
-individual manpages for each helper and in the manual at
-<\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH OPTIONS
-.\" FIXME
-.SS "Shared live\-build options"
-The following command line options are supported by all live\-build programs.
-.IP "\fB\-h, \-\-help\fP" 4
-display help and exit.
-.IP "\fB\-u, \-\-usage\fP" 4
-show usage and exit.
-.IP "\fB\-v, \-\-version\fP" 4
-output version information and exit.
-.SS "Common live\-build options"
-The following command line options are supported by most live\-build
-programs. See the man page of each program for a complete explanation of
-what each option does.
-.IP \fB\-\-breakpoints\fP 4
-run with breakpoints.
-.IP \fB\-\-conffile\fP 4
-use custom configuration file.
-.IP \fB\-\-debug\fP 4
-show debug information.
-.IP \fB\-\-force\fP 4
-force helper execution, even if stage file exists.
-.IP \fB\-\-quiet\fP 4
-be quiet.
-.IP \fB\-\-verbose\fP 4
-.\" FIXME
-be verbose.
-
-.SH "LIVE\-BUILD COMMANDS"
-.\" FIXME
-We divide live\-build into high level ("porcelain") commands and low level
-("plumbing") commands.
-.PP
-.\" FIXME
-Here is the complete list of all available live\-build commands. See their
-man pages for additional documentation.
-
-.SH "HIGH\-LEVEL COMMANDS (PORCELAIN)"
-.\" FIXME
-We separate the porcelain commands into the main commands and some ancillary
-user utilities.
-.SS "Main porcelain commands"
-.IP \fBlb_config\fP(1) 4
-create configuration for live\-build
-.IP \fBlb_bootstrap\fP(1) 4
-create the first stage by bootstrapping a basic debian system
-.IP \fBlb_chroot\fP(1) 4
-create the second stage by customizing the chroot
-.IP \fBlb_binary\fP(1) 4
-create the third stage by generating a binary image
-.IP \fBlb_source\fP(1) 4
-create the optional fourth stage by generating a source image
-.IP \fBlb_clean\fP(1) 4
-clean up system build directories
-.SS "Ancillary Commands"
-.IP \fBlb\fP(1) 4
-generic live\-build wrapper
-.IP \fBlb_build\fP(1) 4
-alias for all stages
-.IP \fBlb_local\fP(1) 4
-helper for using a local live\-build
-.IP \fBlb_testroot\fP(1) 4
-.\" FIXME
-ensure that a system is built as root
-
-.SH "LOW\-LEVEL COMMANDS (PLUMBING)"
-.\" FIXME
-The actual work of live\-build is implemented in the low\-level commands,
-called plumbing. They are not supposed to be used by end users, they should
-stick with porcelains as they ensure that all the different plumbing
-commands are executed in the right order. However, if you intend to reuse
-live\-build commands in your own scripts, then the plumbings might be of
-interest for you.
-.PP
-Note that the interface (set of options and the semantics) to these
-low\-level commands are meant to be a lot more stable than Porcelain level
-commands. The interface to Porcelain commands on the other hand are subject
-to change in order to improve the end user experience.
-.SS "Bootstrap commands"
-.IP \fBlb_bootstrap_cache\fP(1) 4
-cache bootstrap stage
-.IP \fBlb_bootstrap_cdebootstrap\fP(1) 4
-bootstrap a Debian system with cdebootstrap(1)
-.IP \fBlb_bootstrap_debootstrap\fP(1) 4
-bootstrap a Debian system with debootstrap(8)
-.SS "Chroot commands"
-.IP \fBlb_chroot_apt\fP(1) 4
-manage /etc/apt/apt.conf
-.IP \fBlb_chroot_cache\fP(1) 4
-cache chroot stage
-.IP \fBlb_chroot_debianchroot\fP(1) 4
-manage /etc/debian_chroot
-.IP \fBlb_chroot_devpts\fP(1) 4
-mount /dev/pts
-.IP \fBlb_chroot_dpkg\fP(1) 4
-manage /sbin/dpkg
-.IP \fBlb_chroot_hacks\fP(1) 4
-execute hacks in chroot
-.IP \fBlb_chroot_hostname\fP(1) 4
-manage /bin/hostname
-.IP \fBlb_chroot_hosts\fP(1) 4
-manage /etc/hosts
-.IP \fBlb_chroot_install\-packages\fP(1) 4
-install queued packages into chroot
-.IP \fBlb_chroot_interactive\fP(1) 4
-make build interactive
-.IP \fBlb_chroot_linux\-image\fP(1) 4
-manage /etc/kernel\-img.conf
-.IP \fBlb_chroot_hooks\fP(1) 4
-execute local hooks in chroot
-.IP \fBlb_chroot_local\-includes\fP(1) 4
-copy local files into chroot
-.IP \fBlb_chroot_packages\fP(1) 4
-queue install of packages into chroot
-.IP \fBlb_chroot_local\-patches\fP(1) 4
-apply local patches against chroot
-.IP \fBlb_chroot_local\-preseed\fP(1) 4
-use debconf local preseeding file
-.IP \fBlb_chroot_packagelists\fP(1) 4
-queue install of package lists into chroot
-.IP \fBlb_chroot_proc\fP(1) 4
-mount /proc
-.IP \fBlb_chroot_resolv\fP(1) 4
-manage /etc/resolv.conf
-.IP \fBlb_chroot_selinuxfs\fP(1) 4
-mount /selinux
-.IP \fBlb_chroot_archives\fP(1) 4
-manage /etc/apt/sources.list
-.IP \fBlb_chroot_sysfs\fP(1) 4
-mount /sys
-.IP \fBlb_chroot_sysv\-rc\fP(1) 4
-manage /usr/sbin/policy\-rc.d
-.IP \fBlb_chroot_task\-lists\fP(1) 4
-install task lists into chroot
-.SS "Binary commands"
-.IP \fBlb_binary_chroot\fP(1) 4
-copy chroot into chroot
-.IP \fBlb_binary_debian\-installer\fP(1) 4
-install debian\-installer into binary
-.IP \fBlb_binary_disk\fP(1) 4
-install disk information into binary
-.IP \fBlb_binary_grub\fP(1) 4
-installs grub into binary
-.IP \fBlb_binary_grub2\fP(1) 4
-installs grub2 into binary
-.IP \fBlb_binary_includes\fP(1) 4
-copy files into binary
-.IP \fBlb_binary_iso\fP(1) 4
-build iso binary image
-.IP \fBlb_binary_linux\-image\fP(1) 4
-install linux\-image into binary
-.IP \fBlb_binary_local\-hooks\fP(1) 4
-execute local hooks in binary
-.IP \fBlb_binary_local\-includes\fP(1) 4
-copy files into binary
-.IP \fBlb_binary_local\-packagelists\fP(1) 4
-install local package lists into binary
-.IP \fBlb_binary_manifest\fP(1) 4
-create manifest
-.IP \fBlb_binary_checksums\fP(1) 4
-create binary checksums (md5, sha1, and/or sha256)
-.IP \fBlb_binary_memtest\fP(1) 4
-installs a memtest into binary
-.IP \fBlb_binary_net\fP(1) 4
-build netboot binary image
-.IP \fBlb_binary_rootfs\fP(1) 4
-build rootfs image
-.IP \fBlb_binary_syslinux\fP(1) 4
-installs syslinux into binary
-.IP \fBlb_binary_tar\fP(1) 4
-build harddisk binary image
-.IP \fBlb_binary_hdd\fP(1) 4
-build binary hdd image
-.IP \fBlb_binary_win32\-loader\fP(1) 4
-installs win32\-loader into binary
-.SS "Source commands"
-.IP \fBlb_source_debian\fP(1) 4
-download sources
-.IP \fBlb_source_debian\-live\fP(1) 4
-copy debian\-live config into source
-.IP \fBlb_source_disk\fP(1) 4
-install disk information into source
-.IP \fBlb_source_iso\fP(1) 4
-build iso source image
-.IP \fBlb_source_checksums\fP(1) 4
-create source checksums (md5, sha1, and/or sha256)
-.IP \fBlb_source_net\fP(1) 4
-build source net image
-.IP \fBlb_source_tar\fP(1) 4
-build source tarball
-.IP \fBlb_source_hdd\fP(1) 4
-.\" FIXME
-build source hdd image
-
-.SH "CONFIG FILES"
-.\" FIXME
-Many live\-build commands make use of files in the \fIconfig/\fP directory to
-control what they do. Besides the common \fIconfig/common\fP, which is used by
-all live\-build commands, some additional files can be used to configure the
-behavior of specific live\-build commands. These files are typically named
-config/stage or config/stage_helper (where "stage" of course, is replaced
-with the name of the stage that they belong to, and "helper" with the name
-of the helper).
-.PP
-For example, lb_bootstrap_debootstrap uses files named config/bootstrap and
-config/bootstrap_debootstrap to read the options it will use. See the man
-pages of individual commands for details about the names and formats of the
-files they use. Generally, these files contain variables with values
-assigned, one variable per line. Some programs in live\-build use pairs of
-values or slightly more complicated variable assignments.
-.PP
-Note that live\-build will respect environment variables which are present in
-the context of the shell it is running. If variables can be read from config
-files, then they override environment variables, and if command line options
-are used, they override values from config files. If no value for a given
-variable can be found and thus is unset, live\-build will automatically set
-it to the default value.
-.PP
-In some rare cases, you may want to have different versions of these files
-for different architectures or distributions. If files named
-config/stage.arch or config/stage_helper.arch, and config/stage.dist or
-config/stage_helper.dist exist, where "arch" is the same as the output of
-"dpkg \-\-print\-architecture" and "dist" is the same as the codename of the
-target distribution, then they will be used in preference to other, more
-general files.
-.PP
-.\" FIXME
-All config files are shell scripts which are sourced by a live\-build
-program. That means they have to follow the normal shell syntax. You can
-also put comments in these files; lines beginning with "#" are ignored.
-
-.SH FILES
-.IP \fB/etc/live/build.conf\fP 4
-.IP \fB/etc/live/build/*\fP 4
-
-.SH "SEE ALSO"
-\fIlive\-boot\fP(7)
-.PP
-\fIlive\-config\fP(7)
-.PP
-This program is a part of live\-build.
-
-.SH HOMEPAGE
-More information about live\-build and the Live Systems project can be found
-on the homepage at <\fIhttp://live\-systems.org/\fP> and in the manual
-at <\fIhttp://live\-systems.org/manual/\fP>.
-
-.SH BUGS
-Bugs can be reported by submitting a bugreport for the live\-build package in
-the Bug Tracking System at <\fIhttp://bugs.debian.org/\fP> or by
-writing a mail to the Live Systems mailing list at
-<\fIdebian\-live@lists.debian.org\fP>.
-
-.SH AUTHOR
-live\-build was written by Daniel Baumann
-<\fImail@daniel\-baumann.ch\fP>.