[svn-upgrade] Integrating new upstream version, strongswan (4.1.1)

4 files changed, 946 insertions, 0 deletions

diff --git a/src/_updown/Makefile.am b/src/_updown/Makefile.am
new file mode 100644
index 000000000..27a467c4f
--- /dev/null
+++ b/src/_updown/Makefile.am
@@ -0,0 +1,3 @@
+dist_ipsec_SCRIPTS = _updown
+dist_man8_MANS = _updown.8
+
diff --git a/src/_updown/Makefile.in b/src/_updown/Makefile.in
new file mode 100644
index 000000000..ccb176fbc
--- /dev/null
+++ b/src/_updown/Makefile.in
@@ -0,0 +1,421 @@
+# Makefile.in generated by automake 1.9.6 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
+# 2003, 2004, 2005  Free Software Foundation, Inc.
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+pkgdatadir = $(datadir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+top_builddir = ../..
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+INSTALL = @INSTALL@
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = src/_updown
+DIST_COMMON = $(dist_ipsec_SCRIPTS) $(dist_man8_MANS) \
+	$(srcdir)/Makefile.am $(srcdir)/Makefile.in
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(install_sh) -d
+CONFIG_CLEAN_FILES =
+am__installdirs = "$(DESTDIR)$(ipsecdir)" "$(DESTDIR)$(man8dir)"
+dist_ipsecSCRIPT_INSTALL = $(INSTALL_SCRIPT)
+SCRIPTS = $(dist_ipsec_SCRIPTS)
+SOURCES =
+DIST_SOURCES =
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(dist_man8_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMDEP_FALSE = @AMDEP_FALSE@
+AMDEP_TRUE = @AMDEP_TRUE@
+AMTAR = @AMTAR@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+BUILD_EAP_SIM_FALSE = @BUILD_EAP_SIM_FALSE@
+BUILD_EAP_SIM_TRUE = @BUILD_EAP_SIM_TRUE@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXCPP = @CXXCPP@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO = @ECHO@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+F77 = @F77@
+FFLAGS = @FFLAGS@
+GPERF = @GPERF@
+GREP = @GREP@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LEX = @LEX@
+LEXLIB = @LEXLIB@
+LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LIBTOOL = @LIBTOOL@
+LN_S = @LN_S@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+PERL = @PERL@
+RANLIB = @RANLIB@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_CISCO_QUIRKS_FALSE = @USE_CISCO_QUIRKS_FALSE@
+USE_CISCO_QUIRKS_TRUE = @USE_CISCO_QUIRKS_TRUE@
+USE_LEAK_DETECTIVE_FALSE = @USE_LEAK_DETECTIVE_FALSE@
+USE_LEAK_DETECTIVE_TRUE = @USE_LEAK_DETECTIVE_TRUE@
+USE_LIBCURL_FALSE = @USE_LIBCURL_FALSE@
+USE_LIBCURL_TRUE = @USE_LIBCURL_TRUE@
+USE_LIBLDAP_FALSE = @USE_LIBLDAP_FALSE@
+USE_LIBLDAP_TRUE = @USE_LIBLDAP_TRUE@
+USE_NAT_TRANSPORT_FALSE = @USE_NAT_TRANSPORT_FALSE@
+USE_NAT_TRANSPORT_TRUE = @USE_NAT_TRANSPORT_TRUE@
+USE_SMARTCARD_FALSE = @USE_SMARTCARD_FALSE@
+USE_SMARTCARD_TRUE = @USE_SMARTCARD_TRUE@
+USE_VENDORID_FALSE = @USE_VENDORID_FALSE@
+USE_VENDORID_TRUE = @USE_VENDORID_TRUE@
+VERSION = @VERSION@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+ac_ct_F77 = @ac_ct_F77@
+am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
+am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
+am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
+am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+confdir = @confdir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+eapdir = @eapdir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+ipsecdir = @ipsecdir@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+piddir = @piddir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+dist_ipsec_SCRIPTS = _updown
+dist_man8_MANS = _updown.8
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
+		&& exit 0; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  src/_updown/Makefile'; \
+	cd $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu  src/_updown/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+install-dist_ipsecSCRIPTS: $(dist_ipsec_SCRIPTS)
+	@$(NORMAL_INSTALL)
+	test -z "$(ipsecdir)" || $(mkdir_p) "$(DESTDIR)$(ipsecdir)"
+	@list='$(dist_ipsec_SCRIPTS)'; for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  if test -f $$d$$p; then \
+	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	    echo " $(dist_ipsecSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(ipsecdir)/$$f'"; \
+	    $(dist_ipsecSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(ipsecdir)/$$f"; \
+	  else :; fi; \
+	done
+
+uninstall-dist_ipsecSCRIPTS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(dist_ipsec_SCRIPTS)'; for p in $$list; do \
+	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
+	  echo " rm -f '$(DESTDIR)$(ipsecdir)/$$f'"; \
+	  rm -f "$(DESTDIR)$(ipsecdir)/$$f"; \
+	done
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+
+distclean-libtool:
+	-rm -f libtool
+uninstall-info-am:
+install-man8: $(man8_MANS) $(man_MANS)
+	@$(NORMAL_INSTALL)
+	test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)"
+	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.8*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \
+	  else file=$$i; fi; \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    8*) ;; \
+	    *) ext='8' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	  $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \
+	done
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \
+	l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \
+	for i in $$l2; do \
+	  case "$$i" in \
+	    *.8*) list="$$list $$i" ;; \
+	  esac; \
+	done; \
+	for i in $$list; do \
+	  ext=`echo $$i | sed -e 's/^.*\\.//'`; \
+	  case "$$ext" in \
+	    8*) ;; \
+	    *) ext='8' ;; \
+	  esac; \
+	  inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \
+	  inst=`echo $$inst | sed -e 's/^.*\///'`; \
+	  inst=`echo $$inst | sed '$(transform)'`.$$ext; \
+	  echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \
+	  rm -f "$(DESTDIR)$(man8dir)/$$inst"; \
+	done
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
+	list='$(DISTFILES)'; for file in $$list; do \
+	  case $$file in \
+	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
+	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
+	  esac; \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
+	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
+	    dir="/$$dir"; \
+	    $(mkdir_p) "$(distdir)$$dir"; \
+	  else \
+	    dir=''; \
+	  fi; \
+	  if test -d $$d/$$file; then \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+	    fi; \
+	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+	  else \
+	    test -f $(distdir)/$$file \
+	    || cp -p $$d/$$file $(distdir)/$$file \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(SCRIPTS) $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(ipsecdir)" "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	  `test -z '$(STRIP)' || \
+	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-libtool
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+info: info-am
+
+info-am:
+
+install-data-am: install-dist_ipsecSCRIPTS install-man
+
+install-exec-am:
+
+install-info: install-info-am
+
+install-man: install-man8
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-dist_ipsecSCRIPTS uninstall-info-am \
+	uninstall-man
+
+uninstall-man: uninstall-man8
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	distclean distclean-generic distclean-libtool distdir dvi \
+	dvi-am html html-am info info-am install install-am \
+	install-data install-data-am install-dist_ipsecSCRIPTS \
+	install-exec install-exec-am install-info install-info-am \
+	install-man install-man8 install-strip installcheck \
+	installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic \
+	mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \
+	uninstall-dist_ipsecSCRIPTS uninstall-info-am uninstall-man \
+	uninstall-man8
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/src/_updown/_updown b/src/_updown/_updown
new file mode 100755
index 000000000..8db74f737
--- /dev/null
+++ b/src/_updown/_updown
@@ -0,0 +1,503 @@
+#! /bin/sh
+# iproute2 version, default updown script
+#
+# Copyright (C) 2003-2004 Nigel Meteringham
+# Copyright (C) 2003-2004 Tuomo Soini
+# Copyright (C) 2002-2004 Michael Richardson
+# Copyright (C) 2005-2006 Andreas Steffen <andreas.steffen@strongswan.org>
+# 
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License as published by the
+# Free Software Foundation; either version 2 of the License, or (at your
+# option) any later version.  See <http://www.fsf.org/copyleft/gpl.txt>.
+# 
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# RCSID $Id: _updown.in,v 1.2 2006/04/17 15:06:29 as Exp $
+
+# CAUTION:  Installing a new version of strongSwan will install a new
+# copy of this script, wiping out any custom changes you make.  If
+# you need changes, make a copy of this under another name, and customize
+# that, and use the (left/right)updown parameters in ipsec.conf to make
+# strongSwan use yours instead of this default one.
+
+# things that this script gets (from ipsec_pluto(8) man page)
+#
+#      PLUTO_VERSION
+#              indicates  what  version of this interface is being
+#              used.  This document describes version  1.1.   This
+#              is upwardly compatible with version 1.0.
+#
+#       PLUTO_VERB
+#              specifies the name of the operation to be performed
+#              (prepare-host, prepare-client, up-host, up-client,
+#              down-host, or down-client).  If the address family
+#              for security gateway to security gateway communica­
+#              tions is IPv6, then a suffix of -v6 is added to the
+#              verb.
+#
+#       PLUTO_CONNECTION
+#              is the name of the  connection  for  which  we  are
+#              routing.
+#
+#       PLUTO_NEXT_HOP
+#              is the next hop to which packets bound for the peer
+#              must be sent.
+#
+#       PLUTO_INTERFACE
+#              is the name of the ipsec interface to be used.
+#
+#       PLUTO_REQID
+#              is the requid of the ESP policy
+#
+#       PLUTO_ME
+#              is the IP address of our host.
+#
+#       PLUTO_MY_ID
+#              is the ID of our host.
+#
+#       PLUTO_MY_CLIENT
+#              is the IP address / count of our client subnet.  If
+#              the  client  is  just  the  host,  this will be the
+#              host's own IP address / max (where max  is  32  for
+#              IPv4 and 128 for IPv6).
+#
+#       PLUTO_MY_CLIENT_NET
+#              is the IP address of our client net.  If the client
+#              is just the host, this will be the  host's  own  IP
+#              address.
+#
+#       PLUTO_MY_CLIENT_MASK
+#              is  the  mask for our client net.  If the client is
+#              just the host, this will be 255.255.255.255.
+#
+#       PLUTO_MY_SOURCEIP
+#              if non-empty, then the source address for the route will be
+#              set to this IP address.
+#
+#       PLUTO_MY_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_MY_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on our side.
+#
+#       PLUTO_PEER
+#              is the IP address of our peer.
+#
+#       PLUTO_PEER_ID
+#              is the ID of our peer.
+#
+#       PLUTO_PEER_CA
+#              is the CA which issued the cert of our peer.
+#
+#       PLUTO_PEER_CLIENT
+#              is the IP address / count of the peer's client sub­
+#              net.   If the client is just the peer, this will be
+#              the peer's own IP address / max (where  max  is  32
+#              for IPv4 and 128 for IPv6).
+#
+#       PLUTO_PEER_CLIENT_NET
+#              is the IP address of the peer's client net.  If the
+#              client is just the peer, this will  be  the  peer's
+#              own IP address.
+#
+#       PLUTO_PEER_CLIENT_MASK
+#              is  the  mask  for  the  peer's client net.  If the
+#              client   is   just   the   peer,   this   will   be
+#              255.255.255.255.
+#
+#       PLUTO_PEER_PROTOCOL
+#              is the IP protocol that will be transported.
+#
+#       PLUTO_PEER_PORT
+#              is  the  UDP/TCP  port  to  which  the IPsec SA  is
+#              restricted on the peer side.
+#
+
+# uncomment to log VPN connections
+VPN_LOGGING=1
+#
+# tag put in front of each log entry:
+TAG=vpn
+#
+# syslog facility and priority used:
+FAC_PRIO=local0.notice
+#
+# to create a special vpn logging file, put the following line into
+# the syslog configuration file /etc/syslog.conf:
+#
+# local0.notice                   -/var/log/vpn
+#
+
+# check interface version
+case "$PLUTO_VERSION" in
+1.[0|1])	# Older Pluto?!?  Play it safe, script may be using new features.
+	echo "$0: obsolete interface version \`$PLUTO_VERSION'," >&2
+	echo "$0: 	called by obsolete Pluto?" >&2
+	exit 2
+	;;
+1.*)	;;
+*)	echo "$0: unknown interface version \`$PLUTO_VERSION'" >&2
+	exit 2
+	;;
+esac
+
+# check parameter(s)
+case "$1:$*" in
+':')			# no parameters
+	;;
+iptables:iptables)	# due to (left/right)firewall; for default script only
+	;;
+custom:*)		# custom parameters (see above CAUTION comment)
+	;;
+*)	echo "$0: unknown parameters \`$*'" >&2
+	exit 2
+	;;
+esac
+
+# utility functions for route manipulation
+# Meddling with this stuff should not be necessary and requires great care.
+uproute() {
+	doroute add
+	ip route flush cache
+}
+downroute() {
+	doroute delete
+	ip route flush cache
+}
+
+addsource() {
+	st=0
+	if ! ip -o route get ${PLUTO_MY_SOURCEIP%/*} | grep -q ^local
+	then
+	    it="ip addr add ${PLUTO_MY_SOURCEIP%/*}/32 dev $PLUTO_INTERFACE"
+	    oops="`eval $it 2>&1`"
+	    st=$?
+	    if test " $oops" = " " -a " $st" != " 0"
+	    then
+		oops="silent error, exit status $st"
+	    fi
+	    if test " $oops" != " " -o " $st" != " 0"
+	    then
+		echo "$0: addsource \`$it' failed ($oops)" >&2
+	    fi
+	fi
+	return $st
+}
+
+doroute() {
+	st=0
+	parms="$PLUTO_PEER_CLIENT"
+
+	parms2=
+	if [ -n "$PLUTO_NEXT_HOP" ]
+	then
+	   parms2="via $PLUTO_NEXT_HOP"
+	fi
+	parms2="$parms2 dev $PLUTO_INTERFACE"
+
+	if [ -z "$PLUTO_MY_SOURCEIP" ]
+	then
+	    if [ -f /etc/sysconfig/defaultsource ]
+	    then
+		. /etc/sysconfig/defaultsource
+	    fi
+
+	    if [ -f /etc/conf.d/defaultsource ]
+	    then
+		. /etc/conf.d/defaultsource
+	    fi
+
+	    if [ -n "$DEFAULTSOURCE" ]
+	    then
+		PLUTO_MY_SOURCEIP=$DEFAULTSOURCE
+	    fi
+        fi
+
+	parms3=
+	if test "$1" = "add" -a -n "$PLUTO_MY_SOURCEIP"
+	then
+	    addsource
+	    parms3="$parms3 src ${PLUTO_MY_SOURCEIP%/*}"
+	fi
+
+	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+	"0.0.0.0/0.0.0.0")
+		# opportunistic encryption work around
+		# need to provide route that eclipses default, without 
+		# replacing it.
+		it="ip route $1 0.0.0.0/1 $parms2 $parms3 &&
+			ip route $1 128.0.0.0/1 $parms2 $parms3"
+		;;
+	*)	it="ip route $1 $parms $parms2 $parms3"
+		;;
+	esac
+	oops="`eval $it 2>&1`"
+	st=$?
+	if test " $oops" = " " -a " $st" != " 0"
+	then
+	    oops="silent error, exit status $st"
+	fi
+	if test " $oops" != " " -o " $st" != " 0"
+	then
+	    echo "$0: doroute \`$it' failed ($oops)" >&2
+	fi
+	return $st
+}
+ 
+# in the presence of KLIPS and ipsecN interfaces do not use IPSEC_POLICY 
+if [ `echo "$PLUTO_INTERFACE" | grep "ipsec"` ]
+then
+	IPSEC_POLICY_IN=""
+	IPSEC_POLICY_OUT=""
+else
+	IPSEC_POLICY="-m policy --pol ipsec --proto esp --reqid $PLUTO_REQID"
+	IPSEC_POLICY_IN="$IPSEC_POLICY --dir in"
+	IPSEC_POLICY_OUT="$IPSEC_POLICY --dir out"
+fi
+
+# are there port numbers?
+if [ "$PLUTO_MY_PORT" != 0 ]
+then
+	S_MY_PORT="--sport $PLUTO_MY_PORT"
+	D_MY_PORT="--dport $PLUTO_MY_PORT"
+fi
+if [ "$PLUTO_PEER_PORT" != 0 ]
+then
+	S_PEER_PORT="--sport $PLUTO_PEER_PORT"
+	D_PEER_PORT="--dport $PLUTO_PEER_PORT"
+fi
+
+# the big choice
+case "$PLUTO_VERB:$1" in
+prepare-host:*|prepare-client:*)
+	# delete possibly-existing route (preliminary to adding a route)
+	case "$PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK" in
+	"0.0.0.0/0.0.0.0")
+		# need to provide route that eclipses default, without 
+		# replacing it.
+		parms1="0.0.0.0/1"
+		parms2="128.0.0.0/1"
+		it="ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1"
+		oops="`ip route delete $parms1 2>&1 ; ip route delete $parms2 2>&1`"
+		;;
+	*)
+		parms="$PLUTO_PEER_CLIENT"
+		it="ip route delete $parms 2>&1"
+		oops="`ip route delete $parms 2>&1`"
+		;;
+	esac
+	status="$?"
+	if test " $oops" = " " -a " $status" != " 0"
+	then
+		oops="silent error, exit status $status"
+	fi
+	case "$oops" in
+	*'RTNETLINK answers: No such process'*)	
+		# This is what route (currently -- not documented!) gives
+		# for "could not find such a route".
+		oops=
+		status=0
+		;;
+	esac
+	if test " $oops" != " " -o " $status" != " 0"
+	then
+		echo "$0: \`$it' failed ($oops)" >&2
+	fi
+	exit $status
+	;;
+route-host:*|route-client:*)
+	# connection to me or my client subnet being routed
+	uproute
+	;;
+unroute-host:*|unroute-client:*)
+	# connection to me or my client subnet being unrouted
+	downroute
+	;;
+up-host:)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host:)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-client:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-host:iptables)
+	# connection to me, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
+	#
+	# log IPsec host connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi	
+	;;
+down-host:iptables)
+	# connection to me, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	    -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	    -d $PLUTO_ME $D_MY_PORT $IPSEC_POLICY_IN -j ACCEPT
+	iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	    -s $PLUTO_ME $S_MY_PORT $IPSEC_POLICY_OUT \
+	    -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT -j ACCEPT
+	#
+	# log IPsec host connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	    "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME"
+	  fi
+	fi
+	;;
+up-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, coming up
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -I FORWARD 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -I FORWARD 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -I INPUT 1 -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -I OUTPUT 1 -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# log IPsec client connection setup
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO \
+	      "+ `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+down-client:iptables)
+	# connection to client subnet, with (left/right)firewall=yes, going down
+	# This is used only by the default updown script, not by your custom
+	# ones, so do not mess with it; see CAUTION comment up at top.
+	if [ "$PLUTO_PEER_CLIENT" != "$PLUTO_MY_SOURCEIP/32" ]
+	then
+	  iptables -D FORWARD -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	  iptables -D FORWARD -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	fi
+	#
+	# a virtual IP requires an INPUT and OUTPUT rule on the host
+	# or sometimes host access via the internal IP is needed
+	if [ -n "$PLUTO_MY_SOURCEIP" -o -n "$PLUTO_HOST_ACCESS" ]
+	then
+	  iptables -D INPUT -i $PLUTO_INTERFACE -p $PLUTO_MY_PROTOCOL \
+	      -s $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $S_PEER_PORT \
+	      -d $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $D_MY_PORT \
+	         $IPSEC_POLICY_IN -j ACCEPT
+	  iptables -D OUTPUT -o $PLUTO_INTERFACE -p $PLUTO_PEER_PROTOCOL \
+	      -s $PLUTO_MY_CLIENT_NET/$PLUTO_MY_CLIENT_MASK $S_MY_PORT \
+	      -d $PLUTO_PEER_CLIENT_NET/$PLUTO_PEER_CLIENT_MASK $D_PEER_PORT \
+	         $IPSEC_POLICY_OUT -j ACCEPT
+	fi
+	#
+	# log IPsec client connection teardown
+	if [ $VPN_LOGGING ]
+	then
+	  if [ "$PLUTO_PEER_CLIENT" == "$PLUTO_PEER/32" ]
+	  then
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  else
+	    logger -t $TAG -p $FAC_PRIO -- \
+	      "- `echo -e $PLUTO_PEER_ID` $PLUTO_PEER_CLIENT == $PLUTO_PEER -- $PLUTO_ME == $PLUTO_MY_CLIENT"
+	  fi
+	fi
+	;;
+#
+# IPv6
+#
+prepare-host-v6:*|prepare-client-v6:*)
+	;;
+route-host-v6:*|route-client-v6:*)
+	# connection to me or my client subnet being routed
+	#uproute_v6
+	;;
+unroute-host-v6:*|unroute-client-v6:*)
+	# connection to me or my client subnet being unrouted
+	#downroute_v6
+	;;
+up-host-v6:*)
+	# connection to me coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-host-v6:*)
+	# connection to me going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+up-client-v6:)
+	# connection to my client subnet coming up
+	# If you are doing a custom version, firewall commands go here.
+	;;
+down-client-v6:)
+	# connection to my client subnet going down
+	# If you are doing a custom version, firewall commands go here.
+	;;
+*)	echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2
+	exit 1
+	;;
+esac
diff --git a/src/_updown/_updown.8 b/src/_updown/_updown.8
new file mode 100644
index 000000000..5107d3694
--- /dev/null
+++ b/src/_updown/_updown.8
@@ -0,0 +1,19 @@
+.TH _UPDOWN 8 "27 Apr 2006"
+.\"
+.\" RCSID $Id: _updown.8,v 1.2 2006/04/17 06:48:49 as Exp $
+.\"
+.SH NAME
+ipsec _updown \- route and firewall manipulation script
+.SH SYNOPSIS
+.I _updown
+is invoked by pluto when it has brought up a new connection. This script
+is used to insert the appropriate routing entries for IPsec operation.
+It can also be used to insert and delete dynamic iptables firewall rules.
+The interface to the script is documented in the pluto man page.
+.SH "SEE ALSO"
+ipsec(8), ipsec_pluto(8).
+.SH HISTORY
+Man page written for the Linux FreeS/WAN project <http://www.freeswan.org/>
+by Michael Richardson. Original program written by Henry Spencer. Extended
+for the Linux strongSwan project <http://www.strongswan.org/> by Andreas
+Steffen.