[svn-upgrade] Integrating new upstream version, strongswan (4.3.6)

21 files changed, 126 insertions, 12 deletions

diff --git a/testing/tests/openssl-ikev1/alg-camellia/description.txt b/testing/tests/openssl-ikev1/alg-camellia/description.txt
new file mode 100644
index 000000000..915e6c211
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/description.txt
@@ -0,0 +1,4 @@
+Roadwarrior <b>carol</b> proposes  to gateway <b>moon</b> the cipher suite
+<b>CAMELLIA_CBC_192 / HMAC_SHA2_384 / MODP_3072</b> for the IKE protocol and 
+<b>CAMELLIA_CBC_192 / HMAC_SHA2_384_192 </b> for ESP packets. A ping from <b>carol</b> to
+<b>alice</b> successfully checks the established tunnel.
diff --git a/testing/tests/openssl-ikev1/alg-camellia/evaltest.dat b/testing/tests/openssl-ikev1/alg-camellia/evaltest.dat
new file mode 100644
index 000000000..a3360e5a5
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/evaltest.dat
@@ -0,0 +1,11 @@
+carol::ipsec status::home.*STATE_QUICK_I2.*IPsec SA established::YES
+moon::ipsec status::rw.*STATE_QUICK_R2.*IPsec SA established::YES
+carol::ipsec statusall::IKE proposal: CAMELLIA_CBC_192/HMAC_SHA2_384/MODP_3072::YES
+moon::ipsec statusall::IKE proposal: CAMELLIA_CBC_192/HMAC_SHA2_384/MODP_3072::YES
+carol::ping -c 1 -s 120 -p deadbeef PH_IP_ALICE::128 bytes from PH_IP_ALICE: icmp_seq=1::YES
+carol::ipsec statusall::ESP proposal: CAMELLIA_CBC_192/HMAC_SHA2_384::YES
+moon::ipsec statusall::ESP proposal: CAMELLIA_CBC_192/HMAC_SHA2_384::YES
+carol::ip xfrm state::enc cbc(camellia)::YES
+moon::ip xfrm state::enc cbc(camellia)::YES
+moon::tcpdump::IP carol.strongswan.org > moon.strongswan.org: ESP.*length 208::YES
+moon::tcpdump::IP moon.strongswan.org > carol.strongswan.org: ESP.*length 208::YES
diff --git a/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/ipsec.conf b/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/ipsec.conf
new file mode 100755
index 000000000..c226d97d0
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/ipsec.conf
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutodebug="control crypt"
+	crlcheckinterval=180
+	strictcrlpolicy=no
+	charonstart=no
+
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	ike=camellia192-sha384-modp3072!
+	esp=camellia192-sha384!
+
+conn home
+	left=PH_IP_CAROL
+	leftcert=carolCert.pem
+	leftid=carol@strongswan.org
+	right=PH_IP_MOON
+	rightsubnet=10.1.0.0/16
+	rightid=@moon.strongswan.org
+	auto=add
diff --git a/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/strongswan.conf
new file mode 100644
index 000000000..85684b1c9
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/hosts/carol/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+pluto {
+  load = pem pkcs1 x509 openssl random hmac curl
+}
+
+# pluto uses optimized DH exponent sizes (RFC 3526)
+
+libstrongswan {
+  dh_exponent_ansi_x9_42 = no
+}
diff --git a/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/ipsec.conf b/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/ipsec.conf
new file mode 100755
index 000000000..e26d972f0
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/ipsec.conf
@@ -0,0 +1,24 @@
+# /etc/ipsec.conf - strongSwan IPsec configuration file
+
+config setup
+	plutodebug="control crypt"
+	crlcheckinterval=180
+	strictcrlpolicy=no
+	charonstart=no
+       
+conn %default
+	ikelifetime=60m
+	keylife=20m
+	rekeymargin=3m
+	keyingtries=1
+	ike=camellia192-sha384-modp3072!
+	esp=camellia192-sha384!
+
+conn rw
+	left=PH_IP_MOON
+	leftcert=moonCert.pem
+	leftid=@moon.strongswan.org
+	leftsubnet=10.1.0.0/16
+	right=%any
+	rightid=carol@strongswan.org
+	auto=add
diff --git a/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/strongswan.conf
new file mode 100644
index 000000000..85684b1c9
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/hosts/moon/etc/strongswan.conf
@@ -0,0 +1,11 @@
+# /etc/strongswan.conf - strongSwan configuration file
+
+pluto {
+  load = pem pkcs1 x509 openssl random hmac curl
+}
+
+# pluto uses optimized DH exponent sizes (RFC 3526)
+
+libstrongswan {
+  dh_exponent_ansi_x9_42 = no
+}
diff --git a/testing/tests/openssl-ikev1/alg-camellia/posttest.dat b/testing/tests/openssl-ikev1/alg-camellia/posttest.dat
new file mode 100644
index 000000000..c6d6235f9
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/posttest.dat
@@ -0,0 +1,2 @@
+moon::ipsec stop
+carol::ipsec stop
diff --git a/testing/tests/openssl-ikev1/alg-camellia/pretest.dat b/testing/tests/openssl-ikev1/alg-camellia/pretest.dat
new file mode 100644
index 000000000..6d2eeb5f9
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/pretest.dat
@@ -0,0 +1,5 @@
+moon::echo 1 > /proc/sys/net/ipv4/ip_forward
+carol::ipsec start
+moon::ipsec start
+carol::sleep 2 
+carol::ipsec up home
diff --git a/testing/tests/openssl-ikev1/alg-camellia/test.conf b/testing/tests/openssl-ikev1/alg-camellia/test.conf
new file mode 100644
index 000000000..fd33cfb57
--- /dev/null
+++ b/testing/tests/openssl-ikev1/alg-camellia/test.conf
@@ -0,0 +1,22 @@
+#!/bin/bash
+#
+# This configuration file provides information on the
+# UML instances used for this test
+
+# All UML instances that are required for this test
+#
+UMLHOSTS="moon carol winnetou"
+
+# Corresponding block diagram
+#
+DIAGRAM="m-c-w.png"
+
+# UML instances on which tcpdump is to be started
+#
+TCPDUMPHOSTS="moon"
+
+# UML instances on which IPsec is started
+# Used for IPsec logging purposes
+#
+IPSECHOSTS="moon carol"
+
diff --git a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/carol/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/carol/etc/strongswan.conf
index 9836736c3..85684b1c9 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/carol/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/carol/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl
+  load = pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/dave/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/dave/etc/strongswan.conf
index c4211619b..3562ddc67 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/dave/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/dave/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = aes des sha1 sha2 md5 gmp openssl pubkey random hmac curl
+  load = aes des sha1 sha2 md5 pem pkcs1 x509 gmp pem pkcs1 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/moon/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/moon/etc/strongswan.conf
index 9836736c3..85684b1c9 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-high/hosts/moon/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-high/hosts/moon/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl
+  load = pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/carol/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/carol/etc/strongswan.conf
index 668998653..2247496db 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/carol/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/carol/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl 
+  load = pem pkcs1 x509 openssl random hmac curl 
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/dave/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/dave/etc/strongswan.conf
index c4211619b..3562ddc67 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/dave/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/dave/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = aes des sha1 sha2 md5 gmp openssl pubkey random hmac curl
+  load = aes des sha1 sha2 md5 pem pkcs1 x509 gmp pem pkcs1 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/moon/etc/strongswan.conf b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/moon/etc/strongswan.conf
index 668998653..2247496db 100644
--- a/testing/tests/openssl-ikev1/alg-ecp-low/hosts/moon/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/alg-ecp-low/hosts/moon/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl 
+  load = pem pkcs1 x509 openssl random hmac curl 
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/carol/etc/strongswan.conf b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/carol/etc/strongswan.conf
index 9836736c3..85684b1c9 100644
--- a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/carol/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/carol/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl
+  load = pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/dave/etc/strongswan.conf b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/dave/etc/strongswan.conf
index c4211619b..3562ddc67 100644
--- a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/dave/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/dave/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = aes des sha1 sha2 md5 gmp openssl pubkey random hmac curl
+  load = aes des sha1 sha2 md5 pem pkcs1 x509 gmp pem pkcs1 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/moon/etc/strongswan.conf b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/moon/etc/strongswan.conf
index 9836736c3..85684b1c9 100644
--- a/testing/tests/openssl-ikev1/ecdsa-certs/hosts/moon/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/ecdsa-certs/hosts/moon/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = openssl pubkey random hmac curl
+  load = pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/rw-cert/hosts/carol/etc/strongswan.conf b/testing/tests/openssl-ikev1/rw-cert/hosts/carol/etc/strongswan.conf
index ef1b92f3c..e4d41df39 100644
--- a/testing/tests/openssl-ikev1/rw-cert/hosts/carol/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/rw-cert/hosts/carol/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = test-vectors openssl pubkey random hmac curl
+  load = test-vectors pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/rw-cert/hosts/dave/etc/strongswan.conf b/testing/tests/openssl-ikev1/rw-cert/hosts/dave/etc/strongswan.conf
index 825f6fee8..2da706ef7 100644
--- a/testing/tests/openssl-ikev1/rw-cert/hosts/dave/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/rw-cert/hosts/dave/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = test-vectors aes des sha1 sha2 md5 gmp pubkey random hmac curl
+  load = test-vectors aes des sha1 sha2 md5 pem pkcs1 x509 gmp random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)
diff --git a/testing/tests/openssl-ikev1/rw-cert/hosts/moon/etc/strongswan.conf b/testing/tests/openssl-ikev1/rw-cert/hosts/moon/etc/strongswan.conf
index a3ad70a45..1531d9933 100644
--- a/testing/tests/openssl-ikev1/rw-cert/hosts/moon/etc/strongswan.conf
+++ b/testing/tests/openssl-ikev1/rw-cert/hosts/moon/etc/strongswan.conf
@@ -1,7 +1,7 @@
 # /etc/strongswan.conf - strongSwan configuration file
 
 pluto {
-  load = test-vectors openssl pubkey random hmac curl
+  load = test-vectors pem pkcs1 x509 openssl random hmac curl
 }
 
 # pluto uses optimized DH exponent sizes (RFC 3526)