summaryrefslogtreecommitdiff
path: root/programs/send-pr
diff options
context:
space:
mode:
Diffstat (limited to 'programs/send-pr')
-rw-r--r--programs/send-pr/.cvsignore1
-rw-r--r--programs/send-pr/Makefile39
-rw-r--r--programs/send-pr/ipsec_pr.template54
-rw-r--r--programs/send-pr/send-pr.8291
-rwxr-xr-xprograms/send-pr/send-pr.in643
5 files changed, 0 insertions, 1028 deletions
diff --git a/programs/send-pr/.cvsignore b/programs/send-pr/.cvsignore
deleted file mode 100644
index 953bfcf5a..000000000
--- a/programs/send-pr/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-send-pr
diff --git a/programs/send-pr/Makefile b/programs/send-pr/Makefile
deleted file mode 100644
index db7d51929..000000000
--- a/programs/send-pr/Makefile
+++ /dev/null
@@ -1,39 +0,0 @@
-# Makefile for miscelaneous programs
-# Copyright (C) 2002 Michael Richardson <mcr@freeswan.org>
-#
-# This program is free software; you can redistribute it and/or modify it
-# under the terms of the GNU General Public License as published by the
-# Free Software Foundation; either version 2 of the License, or (at your
-# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# for more details.
-#
-# RCSID $Id: Makefile,v 1.1 2004/03/15 20:35:31 as Exp $
-
-FREESWANSRCDIR=../..
-include ${FREESWANSRCDIR}/Makefile.inc
-
-PROGRAM=send-pr
-LIBFILES=ipsec_pr.template
-
-include ../Makefile.program
-
-#
-# $Log: Makefile,v $
-# Revision 1.1 2004/03/15 20:35:31 as
-# added files from freeswan-2.04-x509-1.5.3
-#
-# Revision 1.2 2002/06/02 21:51:41 mcr
-# changed TOPDIR->FREESWANSRCDIR in all Makefiles.
-# (note that linux/net/ipsec/Makefile uses TOPDIR because this is the
-# kernel sense.)
-#
-# Revision 1.1 2002/04/24 07:55:32 mcr
-# #include patches and Makefiles for post-reorg compilation.
-#
-#
-#
-
diff --git a/programs/send-pr/ipsec_pr.template b/programs/send-pr/ipsec_pr.template
deleted file mode 100644
index 3e809a677..000000000
--- a/programs/send-pr/ipsec_pr.template
+++ /dev/null
@@ -1,54 +0,0 @@
-SEND-PR: -*- send-pr -*-
-SEND-PR: Lines starting with `SEND-PR' will be removed automatically, as
-SEND-PR: will all comments (text enclosed in `<' and `>').
-SEND-PR:
-SEND-PR: Please consult the send-pr man page `send-pr(1)' or the Texinfo
-SEND-PR: manual if you are not sure how to fill out a problem report.
-SEND-PR: Note that the Synopsis field is mandatory. The Subject (for
-SEND-PR: the mail) will be made the same as Synopsis unless explicitly
-SEND-PR: changed.
-SEND-PR:
-SEND-PR: Choose from the following categories:
-SEND-PR:
-SEND-PR: pluto - Problems with IKE daemon
-SEND-PR: klips - Problems with kernel code
-SEND-PR: startup- Problems with start/configuration code
-SEND-PR: doc - Problems with documentation
-SEND-PR: interop- Problems with interoperability
-SEND-PR: source - source code patches/contributions
-SEND-PR: admin - Problems with freeswan.org machines
-SEND-PR:
-To: gnats-bugs@freeswan.org
-Subject:
-From: <FROM>
-Reply-To: <REPLYTO>
-Cc:
-X-send-pr-version: 4.0-alpha
-X-GNATS-Notify:
-
->Submitter-Id: <SUBMITTER>
->Originator: <DEFAULT_ORIGINATOR>
->Organization:
- unknown
->Synopsis: <One-line summary of the PR (one line)>
->Confidential: <[ yes | no ] (one line)>
->Severity: <[ critical | serious | non-critical ] (one line)>
->Priority: <[ high | medium | low ] (one line)>
->Category: <choose from a category listed above (one line)>
->Class: <[ sw-bug | dos | interop | mtu | log | doc-bug | support | change-request | mistaken | duplicate ] (one line)>
->Release: <DEFAULT_VERSION>
->Environment:
- <DEFAULT_ENVIRONMENT>
-
->IPsec-barf-location: <DEFAULT_BARF>
- <some URL with the output of ipsec barf.>
-
->Description:
- <Precise description of the problem (multiple lines)>
->How-To-Repeat:
- <code/input/activities to reproduce the problem (multiple lines)>
->Fix:
- <How to correct or work around the problem, if known (multiple lines)>
-
->IPsec-look:
-
diff --git a/programs/send-pr/send-pr.8 b/programs/send-pr/send-pr.8
deleted file mode 100644
index 73a5bbf3c..000000000
--- a/programs/send-pr/send-pr.8
+++ /dev/null
@@ -1,291 +0,0 @@
-.\" -*- nroff -*-
-.\" ---------------------------------------------------------------------------
-.\" man page for send-pr (by Heinz G. Seidl, hgs@cygnus.com)
-.\" updated Feb 1993 for GNATS 3.00 by Jeffrey Osier, jeffrey@cygnus.com
-.\"
-.\" This file is part of the Problem Report Management System (GNATS)
-.\" Copyright 1992 Cygnus Support
-.\"
-.\" This program is free software; you can redistribute it and/or
-.\" modify it under the terms of the GNU General Public
-.\" License as published by the Free Software Foundation; either
-.\" version 2 of the License, or (at your option) any later version.
-.\"
-.\" This program is distributed in the hope that it will be useful,
-.\" but WITHOUT ANY WARRANTY; without even the implied warranty of
-.\" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
-.\" General Public License for more details.
-.\"
-.\" You should have received a copy of the GNU Library General Public
-.\" License along with this program; if not, write to the Free
-.\" Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA
-.\"
-.\" ---------------------------------------------------------------------------
-.nh
-.TH SEND-PR 8 xVERSIONx "February 1993"
-.SH NAME
-ipsec send-pr \- send problem report (PR) to a central support site
-.SH SYNOPSIS
-.B ipsec send-pr
-[
-.I site
-]
-[
-.B \-f
-.I problem-report
-]
-[
-.B \-t
-.I mail-address
-]
-.br
-.in +0.8i
-[
-.B \-P
-]
-[
-.B \-L
-]
-[
-.B \-s
-.I severity
-]
-[
-.B \-c
-.I address
-]
-.br
-[
-.B \-\-request-id
-]
-[
-.B \-V
-]
-.SH DESCRIPTION
-.B ipsec send-pr
-is a tool used to submit
-.I problem reports
-.\" SITE ADMINISTRATORS - change this if you use a local default
-(PRs) to a central support site. In most cases the correct
-.I site
-will be the default. This argument indicates the support site which
-is responsible for the category of problem involved. Some sites may
-use a local address as a default.
-.I site
-values are defined by using the
-.BR aliases (5).
-.LP
-.B ipsec send-pr
-invokes an editor on a problem report template (after trying to fill
-in some fields with reasonable default values). When you exit the
-editor,
-.B ipsec send-pr
-sends the completed form to the
-.I Problem Report Management System
-(\fBGNATS\fR) at a central support site. At the support site, the PR
-is assigned a unique number and is stored in the \fBGNATS\fR database
-according to its category and submitter-id. \fBGNATS\fR automatically
-replies with an acknowledgement, citing the category and the PR
-number.
-.LP
-To ensure that a PR is handled promptly, it should contain your (unique)
-\fIsubmitter-id\fR and one of the available \fIcategories\fR to identify the
-problem area. (Use
-.B `ipsec send-pr -L'
-to see a list of categories.)
-.LP
-The
-.B ipsec send-pr
-template at your site should already be customized with your
-submitter-id (running `\|\fBinstall-sid\fP \fIsubmitter-id\fP\|' to
-accomplish this is part of the installation procedures for
-.BR ipsec send-pr ).
-If this hasn't been done, see your system administrator for your
-submitter-id, or request one from your support site by invoking
-.B `ipsec send-pr \-\-request\-id'.
-If your site does not distinguish between different user sites, or if
-you are not affiliated with the support site, use
-.B `net'
-for this field.
-.LP
-The more precise your problem description and the more complete your
-information, the faster your support team can solve your problems.
-.SH OPTIONS
-.TP
-.BI \-f " problem-report"
-specify a file (\fIproblem-report\fR) which already contains a
-complete problem report.
-.B ipsec send-pr
-sends the contents of the file without invoking the editor. If
-the value for
-.I problem-report
-is
-.BR `\|\-\|' ,
-then
-.B ipsec send-pr
-reads from standard input.
-.TP
-.BI \-s " severity"
-Give the problem report the severity
-.IR severity .
-.TP
-.BI \-t " mail-address"
-Change mail address at the support site for problem reports. The
-default
-.I mail-address
-is the address used for the default
-.IR site .
-Use the
-.I site
-argument rather than this option in nearly all cases.
-.TP
-.BI \-c " address"
-Put
-.I address
-in the
-.B Cc:
-header of the message.
-.TP
-.B \-P
-print the form specified by the environment variable
-.B PR_FORM
-on standard output. If
-.B PR_FORM
-is not set, print the standard blank PR template. No mail is sent.
-.TP
-.B -L
-print the list of available categories. No mail is sent.
-.TP
-.B \-\-request\-id
-sends mail to the default support site, or
-.I site
-if specified, with a request for your
-.IR submitter-id .
-If you are
-not affiliated with
-.IR site ,
-use a
-.I submitter-id
-of
-.BR net \|'.
-.TP
-.B \-V
-Display the
-.B ipsec send-pr
-version number.
-.LP
-Note: use
-.B ipsec send-pr
-to submit problem reports rather than mailing them directly. Using
-both the template and
-.B ipsec send-pr
-itself will help ensure all necessary information will reach the
-support site.
-.SH ENVIRONMENT
-The environment variable
-.B EDITOR
-specifies the editor to invoke on the template.
-.br
-default:
-.B vi
-.sp
-If the environment variable
-.B PR_FORM
-is set, then its value is used as the file name of the template for
-your problem-report editing session. You can use this to start with a
-partially completed form (for example, a form with the identification
-fields already completed).
-.SH "HOW TO FILL OUT A PROBLEM REPORT"
-Problem reports have to be in a particular form so that a program can
-easily manage them. Please remember the following guidelines:
-.IP \(bu 3m
-describe only
-.B one problem
-with each problem report.
-.IP \(bu 3m
-For follow-up mail, use the same subject line as the one in the automatic
-acknowledgent. It consists of category, PR number and the original synopsis
-line. This allows the support site to relate several mail messages to a
-particular PR and to record them automatically.
-.IP \(bu 3m
-Please try to be as accurate as possible in the subject and/or synopsis line.
-.IP \(bu 3m
-The subject and the synopsis line are not confidential. This is
-because open-bugs lists are compiled from them. Avoid confidential
-information there.
-.LP
-See the GNU
-.B Info
-file
-.B send-pr.info
-or the document \fIReporting Problems With send-pr\fR\ for detailed
-information on reporting problems
-.SH "HOW TO SUBMIT TEST CASES, CODE, ETC."
-Submit small code samples with the PR. Contact the support site for
-instructions on submitting larger test cases and problematic source
-code.
-.SH FILES
-.ta \w'/tmp/pbad$$ 'u
-/tmp/p$$ copy of PR used in editing session
-.br
-/tmp/pf$$ copy of empty PR form, for testing purposes
-.br
-/tmp/pbad$$ file for rejected PRs
-.br
-@IPSEC_DIR@/send-pr.conf script to customize send-pr.
-.SH EMACS USER INTERFACE
-An Emacs user interface for
-.B send-pr
-with completion of field values is part of the
-.B send-pr
-distribution (invoked with
-.BR "M-x send-pr" ).
-See the file
-.B send-pr.info
-or the ASCII file
-.B INSTALL
-in the top level directory of the distribution for configuration and
-installation information. The Emacs LISP template file is
-.B send-pr-el.in
-and is installed as
-.BR send-pr.el .
-.SH INSTALLATION AND CONFIGURATION
-See
-.B send-pr.info
-or
-.B INSTALL
-for installation instructions.
-.SH SEE ALSO
-.I Reporting Problems Using send-pr
-(also installed as the GNU Info file
-.BR send-pr.info ).
-.LP
-.BR gnats (l),
-.BR query-pr (1),
-.BR edit-pr (1),
-.BR gnats (8),
-.BR queue-pr (8),
-.BR at-pr (8),
-.BR mkcat (8),
-.BR mkdist (8).
-.SH AUTHORS
-Jeffrey Osier, Brendan Kehoe, Jason Merrill, Heinz G. Seidl (Cygnus
-Support)
-.SH COPYING
-Copyright (c) 1992, 1993 Free Software Foundation, Inc.
-.PP
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
-.PP
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided that the
-entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-.PP
-Permission is granted to copy and distribute translations of this
-manual into another language, under the above conditions for modified
-versions, except that this permission notice may be included in
-translations approved by the Free Software Foundation instead of in
-the original English.
-
diff --git a/programs/send-pr/send-pr.in b/programs/send-pr/send-pr.in
deleted file mode 100755
index 6cd202470..000000000
--- a/programs/send-pr/send-pr.in
+++ /dev/null
@@ -1,643 +0,0 @@
-#!/bin/sh
-# Submit a problem report to a GNATS site.
-# Copyright (C) 2001 Milan Zamazal
-# Copyright (C) 1993, 2001 Free Software Foundation, Inc.
-# Contributed by Brendan Kehoe (brendan@cygnus.com), based on a
-# version written by Heinz G. Seidl (hgs@cygnus.com).
-# Further edited by Milan Zamazal (pdm@zamazal.org).
-# mktemp support by Yngve Svendsen (yngve.svendsen@clustra.com).
-#
-# This file is part of GNU GNATS.
-#
-# GNU GNATS is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# GNU GNATS is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with GNU GNATS; see the file COPYING. If not, write to
-# the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
-
-#
-# $Id: send-pr.in,v 1.1 2004/03/15 20:35:31 as Exp $
-#
-
-# The version of this send-pr.
-VERSION=4.0-alpha
-
-#SWAN_VERSION=
-
-# The submitter-id for your site.
-SUBMITTER=net
-
-# The place where our usual binaries live.
-BINDIR=@IPSEC_DIR@
-
-# The place where the builtin binaries are located.
-LIBDIR=@IPSEC_LIBDIR@
-LIBEXECDIR=@IPSEC_EXECDIR@
-
-# The default release for this host.
-DEFAULT_RELEASE="gnats-4.0-alpha"
-
-# The default organization.
-DEFAULT_ORGANIZATION="net"
-
-# How to read the passwd database.
-PASSWD="cat /etc/passwd"
-
-# Is the mktemp command available?
-MKTEMP="yes"
-
-ECHON=bsd
-
-# By default send-pr connects directly to the database. However, it
-# can be configured to use an existing template file by setting the
-# TEMPLATE variable below to point to a PR template generated from
-# "send-pr -P".
-TEMPLATE="$LIBDIR/ipsec_pr.template"
-
-# send-pr can use mail to submit PRs, instead of connecting to the
-# database directly. MAILPROG needs to point to a compatible mailer
-# (sendmail will work). If MAILPROG needs to have the address that
-# the mail is being sent to specified on the command line, it should
-# be specified here as well (for example, the command
-# MAILPROG="mail bugs@foo.bar.com"
-# should work). If sendmail is used, this should be set to
-# MAILPROG="/usr/lib/sendmail -oi -t"
-MAILPROG="/usr/sbin/sendmail -oi -t"
-
-# The address that PRs are sent to. Normally this can be left as "bugs";
-# however, if using mail to submit PRs, this should be set to the address
-# where PRs should be sent.
-MAILADDR="freeswan-bugs@freeswan.org"
-
-if [ $ECHON = bsd ] ; then
- ECHON1="echo -n"
- ECHON2=
-elif [ $ECHON = sysv ] ; then
- ECHON1=echo
- ECHON2='\c'
-else
- ECHON1=echo
- ECHON2=
-fi
-
-# Configuration file to be read. It must be a shell script that can redefine
-# the variables above to fit a local configuration.
-CONFIGFILE=@IPSEC_DIR@/send-pr.conf
-
-if [ -r $CONFIGFILE ]; then
- . $CONFIGFILE
-fi
-
-#
-
-if [ -z "$TMPDIR" ]; then
- TMPDIR=/tmp
-else
- if [ "`echo $TMPDIR | grep '/$'`" != "" ]; then
- TMPDIR="`echo $TMPDIR | sed -e 's,/$,,'`"
- fi
-fi
-
-# TEMP: Temporary copy of the PR, to be edited by the user.
-# BAD: The PR will end up here if the user aborts.
-# REF: The 'reference' copy of the PR template, used to verify that the user
-# actually did edit the template.
-# FIXFIL: A sed script used to remove comments from the template before
-# processing.
-if [ $MKTEMP = yes ]; then
- TEMP=`mktemp $TMPDIR/pXXXXXX` || exit 1
- BAD=`mktemp $TMPDIR/pbadXXXXXX` || exit 1
- REF=`mktemp $TMPDIR/pfXXXXXX` || exit 1
- FIXFIL=`mktemp $TMPDIR/fixXXXXXX` || exit 1
-else
- TEMP=$TMPDIR/p$$
- BAD=$TMPDIR/pbad$$
- REF=$TMPDIR/pf$$
- FIXFIL=$TMPDIR/fix$$
- bad_temp=0
- : > $TEMP || bad_temp=1
- : > $BAD || bad_temp=1
- : > $REF || bad_temp=1
- : > $FIXFIL || bad_temp=1
- if [ $bad_temp = 1 ]; then
- rm -f $TEMP $BAD $REF $FIXFIL
- exit 1;
- fi
-fi
-REMOVE_TEMP="rm -f $TEMP $BAD $REF"
-
-# find a user name
-if [ "$LOGNAME" = "" ]; then
- if [ "$USER" != "" ]; then
- LOGNAME="$USER"
- else
- LOGNAME="UNKNOWN"
- fi
-fi
-
-FROM="$LOGNAME"
-REPLYTO="${REPLY_TO:-${REPLYTO:-$LOGNAME}}"
-if [ "x$MAILPROG" != "x" ]
-then
- RESP_ALIAS="`query-pr --adm-field responsible --adm-key $LOGNAME --adm-subfield alias 2>/dev/null`"
-else
- RESP_ALIAS=""
-fi
-
-# Find out the name of the originator of this PR.
-if [ -n "$NAME" ]; then
- DEFAULT_ORIGINATOR="$NAME"
-elif [ -f $HOME/.fullname ]; then
- DEFAULT_ORIGINATOR="`sed -e '1q' $HOME/.fullname`"
-else
- # Must use temp file due to incompatibilities in quoting behavior
- # and to protect shell metacharacters in the expansion of $LOGNAME
- $PASSWD | grep "^$LOGNAME:" | awk -F: '{print $5}' | sed -e 's/,.*//' > $TEMP
- if [ "x$RESP_ALIAS" != "x" ]
- then
- DEFAULT_ORIGINATOR="$RESP_ALIAS (`cat $TEMP`)"
- else
- DEFAULT_ORIGINATOR="$FROM (`cat $TEMP`)"
- fi
- rm -f $TEMP
-fi
-
-if [ -z "$ORGANIZATION" ]
-then
- ORGANIZATION="$DEFAULT_ORGANIZATION";
-fi
-
-if [ -n "$ORGANIZATION" -a "x$ORGANIZATION" != "xunknown" ]; then
- if [ -f "$ORGANIZATION" ]; then
- ORGANIZATION="`cat $ORGANIZATION`"
- fi
- if [ -n "$ORGANIZATION" ]; then
- ORGANIZATION="$ORGANIZATION"
- elif [ -f $HOME/.organization ]; then
- ORGANIZATION="`cat $HOME/.organization`"
- fi
-fi
-
-if [ "x$ORGANIZATION" = "xunknown" ]; then
- cat <<__EOF__
-It seems that send-pr is not installed with your organization set to a useful
-value. To fix this, you need to edit the configuration file
-$CONFIGFILE
-and fill in the organization with the correct value.
-
-__EOF__
- ORGANIZATION="";
-fi 1>&2
-
-# If they don't have a preferred editor set, then use
-if [ -z "$VISUAL" ]; then
- if [ -z "$EDITOR" ]; then
- EDIT=vi
- else
- EDIT="$EDITOR"
- fi
-else
- EDIT="$VISUAL"
-fi
-
-# Find out some information.
-SYSTEM=`( [ -f /bin/uname ] && /bin/uname -a ) || \
- ( [ -f /usr/bin/uname ] && /usr/bin/uname -a ) || echo "" | sed -e 's,|,\\|,'`
-
-# Our base command name.
-COMMAND=`echo $0 | sed -e 's,.*/,,'`
-USAGE="Usage: $COMMAND [OPTION]...
-
- -b --batch run without printing most messages
- --barf include a full barf inline rather than just look
- -c --cc=LINE put LINE to the CC header
- -d --database=DATABASE submit PR to DATABASE
- -f --file=FILE read the PR template from FILE (\`-' for stdin)
- -p --print just print the template and exit
- --request-id send a request for a user id
- -s --severity=SEVERITY PR severity
-
- -h --help display this help and exit
- -V --version output version information and exit
-"
-REMOVE=
-BATCH=
-CC=
-DEFAULT_SEVERITY=
-BARF=${BARF-false}
-
-if [ "$SYSTEM" != "" ]
-then
- DEFAULT_ENVIRONMENT="System: $SYSTEM"
-fi
-
-if [ "$SWAN_VERSION" != "" ]
-then
- DEFAULT_VERSION="$SWAN_VERSION";
-else
- DEFAULT_VERSION=`ipsec --versioncode`
-fi
-DEFAULT_VERSION=`echo $DEFAULT_VERSION | sed -e 's,\/,\\\/,'`
-
-while [ $# -gt 0 ]; do
- case "$1" in
- -r) ;; # Ignore for backward compat.
- -f | --file) if [ $# -eq 1 ]; then echo "$USAGE"; exit 1; fi
- shift ; IN_FILE="$1"
- if [ "$IN_FILE" != "-" -a ! -r "$IN_FILE" ]; then
- echo "$COMMAND: cannot read $IN_FILE"
- exit 1
- fi
- ;;
- -b | --batch) BATCH=true ;;
- --barf) BARF=true ;;
- -c | --cc) if [ $# -eq 1 ]; then echo "$USAGE"; exit 1; fi
- shift ; CC="$1"
- ;;
- -d | --database) if [ $# -eq 1 ]; then echo "$USAGE"; exit 1; fi
- shift; GNATSDB="$1"; export GNATSDB
- ;;
- -s | --severity) if [ $# -eq 1 ]; then echo "$USAGE"; exit 1; fi
- shift ; DEFAULT_SEVERITY="$1"
- ;;
- -p | -P | --print) PRINT=true ;;
- --request-id) REQUEST_ID=true ;;
- -h | --help) echo "$USAGE"; exit 0 ;;
- -V | --version) echo "$VERSION"; exit 0 ;;
- -*) echo "$USAGE" ; exit 1 ;;
- *) echo "$USAGE" ; exit 1 ;;
- esac
- shift
-done
-
-if [ "x$SUBMITTER" = "x" ]
-then
- SUBMITTER="unknown"
-fi
-
-if [ "x$SUBMITTER" = "xunknown" -a -z "$REQUEST_ID" -a -z "$IN_FILE" ]; then
- cat << '__EOF__'
-It seems that send-pr is not installed with your unique submitter-id.
-You need to run
-
- install-sid YOUR-SID
-
-where YOUR-SID is the identification code you received with `send-pr'.
-`send-pr' will automatically insert this value into the template field
-`>Submitter-Id'. If you've downloaded `send-pr' from the Net, use `net'
-for this value. If you do not know your id, run `send-pr --request-id' to
-get one from your support site.
-__EOF__
- exit 1
-fi
-
-# So the template generation code finds it.
-DEFAULT_SUBMITTERID=${SUBMITTER}
-
-# Catch some signals. ($xs kludge needed by Sun /bin/sh)
-xs=0
-trap 'rm -f $REF $TEMP $FIXFIL; exit $xs' 0
-trap 'echo "$COMMAND: Aborting ..."; rm -f $REF $TEMP $FIXFIL; xs=1; exit' 1 3 13 15
-
-if [ "x$PRINT" = "xtrue" ]; then
- FROM="<FROM>"
- REPLYTO="<REPLYTO>"
- DEFAULT_ORIGINATOR="<DEFAULT_ORIGINATOR>"
- DEFAULT_SUBMITTERID="<SUBMITTER>"
-fi
-
-# If they told us to use a specific file, then do so.
-if [ -n "$IN_FILE" ]; then
- if [ "$IN_FILE" = "-" ]; then
- # The PR is coming from the standard input.
- cat > $TEMP
- else
- # Use the file they named.
- cat $IN_FILE > $TEMP
- fi
-else
- if [ -n "$TEMPLATE" -a -z "$PRINT_INTERN" ]; then
- # If their TEMPLATE points to a bogus entry, then bail.
- if [ ! -f "$TEMPLATE" -o ! -r "$TEMPLATE" -o ! -s "$TEMPLATE" ]; then
- echo "$COMMAND: can't seem to read your template file (\`$TEMPLATE'), ignoring TEMPLATE"
- sleep 1
- PRINT_INTERN=bad_prform
- fi
- fi
-
- if [ -n "$TEMPLATE" -a -z "$PRINT_INTERN" ]; then
- sed "s/<FROM>/$FROM/;s/<REPLYTO>/$REPLYTO/;s/<DEFAULT_ORIGINATOR>/$DEFAULT_ORIGINATOR/;s/<SUBMITTER>/$DEFAULT_SUBMITTERID/;s|<DEFAULT_ENVIRONMENT>|$DEFAULT_ENVIRONMENT|;s/<DEFAULT_BARF>/$DEFAULT_BARF/;s/<DEFAULT_VERSION>/$DEFAULT_VERSION/;" < $TEMPLATE > $TEMP ||
- ( echo "$COMMAND: could not copy $TEMPLATE" ; xs=1; exit )
- else
- # Which genius thought of iterating through this loop twice, when the
- # cp command would suffice?
- for file in $TEMP ; do
- cat > $file << '__EOF__'
-SEND-PR: -*- send-pr -*-
-SEND-PR: Lines starting with `SEND-PR' will be removed automatically, as
-SEND-PR: will all comments (text enclosed in `<' and `>').
-SEND-PR:
-SEND-PR: Please consult the send-pr man page `send-pr(1)' or the Texinfo
-SEND-PR: manual if you are not sure how to fill out a problem report.
-SEND-PR: Note that the Synopsis field is mandatory. The Subject (for
-SEND-PR: the mail) will be made the same as Synopsis unless explicitly
-SEND-PR: changed.
-SEND-PR:
-SEND-PR: Choose from the following categories:
-SEND-PR:
-__EOF__
-
- # Format the categories so they fit onto lines.
- CATEGORIES=`${BINDIR}/query-pr --valid-values Category`;
- l=`echo "$CATEGORIES" | \
- awk 'BEGIN {max = 0; } { if (length($0) > max) { max = length($0); } }
- END {print max + 1;}'`
- c=`expr 61 / $l`
- if [ $c -eq 0 ]; then c=1; fi
- echo "$CATEGORIES" | \
- awk 'BEGIN {printf "SEND-PR: "; i = 0 }
- { printf ("%-'$l'.'$l's", $0);
- if ((++i % '$c') == 0) { printf "\nSEND-PR: " } }
- END { printf "\nSEND-PR:\n"; }' >> $file
-
- cat >> $file << __EOF__
-To: $MAILADDR
-Subject:
-From: $FROM
-Reply-To: $REPLYTO
-Cc: $CC
-X-send-pr-version: $VERSION
-X-GNATS-Notify:
-
-
-__EOF__
-
- #
- # Iterate through the list of input fields. fieldname is the
- # name of the field. fmtname is the formatted name of the field,
- # with >, : and extra spaces to cause the field contents to be
- # aligned.
- #
- ${BINDIR}/query-pr --list-input-fields | awk '{a[NR]=$1""; mnr = NR+1; len = length($1) + 2; if (mlen < len) mlen = len; } END { for (x = 1; x < mnr; x++) { b = ">"a[x]":"; printf ("%s %-"mlen"s&\n", a[x], b); } }' | while read fieldname fmtname
- do
- fmtname="`echo "$fmtname" | sed 's/[&]$//;'`"
- upname="`echo $fieldname | sed 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/;s/-//g;'`"
- # Grab the default value for this field.
- eval 'default_val="$DEFAULT_'${upname}'"'
- # What's stored in the field?
- type=`${BINDIR}/query-pr --field-type $fieldname | sed 'y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/'`
- case $type in
- enum)
- if [ "$default_val" != "" ]
- then
- desc=$default_val;
- else
- if [ "$fieldname" != "Category" ]
- then
- values=`${BINDIR}/query-pr --valid-values $fieldname | tr '\n' ' ' | sed 's/ *$//g;s/ / | /g;s/^/[ /;s/$/ ]/;'`
- valslen=`echo "$values" | wc -c`
- else
- values="choose from a category listed above"
- valslen=1;
- fi
- if [ "$valslen" -gt 160 ]
- then
- desc="<`${BINDIR}/query-pr --field-description $fieldname` (one line)>";
- else
- desc="<${values} (one line)>";
- fi
- dpat=`echo "$desc" | tr '\]\[*+^$|\()&/' '............'`
- echo "/^>${fieldname}:/ s/${dpat}//" >> $FIXFIL
- fi
- echo "${fmtname}${desc}" >> $file
- ;;
- multitext)
- if [ "$default_val" != "" ]
- then
- desc=" $default_val";
- else
- desc=" <`${BINDIR}/query-pr --field-description $fieldname` (multiple lines)>";
- dpat=`echo "$desc" | tr '\]\[*+^$|\()&/' '............'`
- echo "s/^${dpat}//" >> $FIXFIL
- fi
- echo "${fmtname}" >> $file;
- echo "$desc" >> $file;
- ;;
- *)
- if [ "$default_val" != "" ]
- then
- desc="${default_val}"
- else
- desc="<`${BINDIR}/query-pr --field-description $fieldname` (one line)>"
- dpat=`echo "$desc" | tr '\]\[*+^$|\()&/' '............'`
- echo "/^>${fieldname}:/ s/${dpat}//" >> $FIXFIL
- fi
- echo "${fmtname}${desc}" >> $file
- ;;
- esac
- done
- done
- fi
-
- if [ "$PRINT" = true -o "$PRINT_INTERN" = true ]; then
- cat $TEMP
- xs=0; exit
- fi
-
- if $BARF
- then
- ipsec barf >>$TEMP
- else
- ipsec look >>$TEMP
- fi
-
- cp $TEMP $REF
-
- chmod u+w $TEMP
- if [ -z "$REQUEST_ID" ]; then
- eval $EDIT $TEMP
- else
- ed -s $TEMP << '__EOF__'
-/^Subject/s/^Subject:.*/Subject: request for a customer id/
-/^>Category/s/^>Category:.*/>Category: send-pr/
-w
-q
-__EOF__
- fi
-
- if cmp -s $REF $TEMP ; then
- echo "$COMMAND: problem report not filled out, therefore not sent"
- xs=1; exit
- fi
-fi
-
-# TEMP is the PR that we are editing. When we're done, REF will contain
-# the final PR to be sent.
-
-while [ -z "$REQUEST_ID" ]; do
- CNT=0
-
- #
- # Remove comments.
- #
- echo '/^SEND-PR:/d' >> $FIXFIL
- sed -f $FIXFIL $TEMP > $REF
-
- # REF now has the actual PR that we want to send.
-
- #
- # Check that synopsis is not empty.
- #
- if grep "^>Synopsis:[ ]*$" $REF > /dev/null
- then
- echo "$COMMAND: Synopsis must not be empty."
- CNT=`expr $CNT + 1`
- fi
-
- if [ "x$MAILPROG" = "x" ]
- then
- # Since we're not using mail, use pr-edit to check the PR. We can't
- # do much checking otherwise, sorry.
- $LIBEXECDIR/pr-edit --check-initial < $REF || CNT=`expr $CNT + 1`
- fi
-
- [ $CNT -gt 0 -a -z "$BATCH" ] &&
- echo "Errors were found with the problem report."
-
- while true; do
- if [ -z "$BATCH" ]; then
- $ECHON1 "a)bort, e)dit or s)end? $ECHON2"
- read input
- else
- if [ $CNT -eq 0 ]; then
- input=s
- else
- input=a
- fi
- fi
- case "$input" in
- a*)
- if [ -z "$BATCH" ]; then
- echo "$COMMAND: the problem report remains in $BAD and is not sent."
- mv $TEMP $BAD
- else
- echo "$COMMAND: the problem report is not sent."
- fi
- xs=1; exit
- ;;
- e*)
- eval $EDIT $TEMP
- continue 2
- ;;
- s*)
- break 2
- ;;
- esac
- done
-done
-
-#
-# Make sure the mail has got a Subject. If not, use the same as
-# in Synopsis.
-#
-
-if grep '^Subject:[ ]*$' $REF > /dev/null
-then
- SYNOPSIS=`grep '^>Synopsis:' $REF | sed -e 's/^>Synopsis:[ ]*//'`
- ed -s $REF << __EOF__
-/^Subject:/s/:.*\$/: $SYNOPSIS/
-w
-q
-__EOF__
-fi
-
-while :
-do
- if [ "x$MAILPROG" != "x" ]
- then
- # Use mail to send the PR.
- if $MAILPROG < $REF
- then
- echo "$COMMAND: problem report mailed"
- xs=0; exit
- else
- echo "$MAILPROG failed!"
- fi
- else
- if $LIBEXECDIR/pr-edit --submit < $REF; then
- echo "$COMMAND: problem report filed"
- xs=0; exit
- else
- echo "$COMMAND: the problem report is not sent."
- fi
- fi
- while true
- do
- if [ -z "$BATCH" ]; then
- $ECHON1 "a)bort or s)end? (file=$REF) $ECHON2"
- read input
- case "$input" in
- a*)
- break 2 ;;
- s*)
- break ;;
- esac
- else
- break 2;
- fi
- done
-done
-
-if [ -z "$BATCH" ]; then
- echo "$COMMAND: the problem report remains in $BAD and is not sent."
- mv $TEMP $BAD
-else
- echo "$COMMAND: the problem report is not sent, is in $REF."
-fi
-
-xs=1; exit;
-
-#
-# $Log: send-pr.in,v $
-# Revision 1.1 2004/03/15 20:35:31 as
-# added files from freeswan-2.04-x509-1.5.3
-#
-# Revision 1.10 2003/07/14 12:26:17 mcr
-# use | as delimitor for $DEFAULT_ENVIRONMENT.
-# switch | to \\| when in $DEFAULT_ENVIRONMENT.
-# this is due to PR#236 where the "uname" output
-# says GNU/Linux, screwing up sed.
-#
-# Revision 1.9 2003/02/03 21:51:06 mcr
-# if MAILPROG fails, then offer to try again.
-#
-# Revision 1.8 2002/12/10 02:28:13 mcr
-# adjusted template to use gnats-bugs@freeswan.org
-# fix sed script to deal with version sanitizer.
-#
-# Revision 1.7 2002/12/10 02:17:34 mcr
-# need to init variables first
-#
-# Revision 1.6 2002/12/10 02:16:23 mcr
-# adjusted send-pr to look at LIBDIR, not LIBEXECDIR
-#
-# Revision 1.5 2002/09/30 16:04:05 mcr
-# fix for sed bug in "send-pr"
-#
-# Revision 1.4 2002/04/24 07:36:10 mcr
-# Moved from ./utils/send-pr.sh,v
-#
-# Revision 1.3 2001/11/27 15:02:55 mcr
-# added rcsids.
-# fixed submission address to be freeswan-bugs@freeswan.org
-# use new ipsec --versioncode to get version info.
-#
-#
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 06:56:08 +0000