diff options
Diffstat (limited to 'testing/tests/ikev2/net2net-same-nets/hosts/sun/etc')
3 files changed, 257 insertions, 0 deletions
diff --git a/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/ipsec.conf b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/ipsec.conf new file mode 100755 index 000000000..33e1e6656 --- /dev/null +++ b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/ipsec.conf @@ -0,0 +1,27 @@ +# /etc/ipsec.conf - strongSwan IPsec configuration file + +config setup + crlcheckinterval=180 + strictcrlpolicy=no + plutostart=no + +conn %default + ikelifetime=60m + keylife=20m + rekeymargin=3m + keyingtries=1 + keyexchange=ikev2 + mobike=no + +conn net-net + left=PH_IP_SUN + leftcert=sunCert.pem + leftid=@sun.strongswan.org + leftsubnet=10.4.0.0/14 + leftupdown=/etc/mark_updown + right=PH_IP_MOON + rightid=@moon.strongswan.org + rightsubnet=10.0.0.0/14 + mark_in=8 + mark_out=4 + auto=add diff --git a/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/mark_updown b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/mark_updown new file mode 100755 index 000000000..d7b68956c --- /dev/null +++ b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/mark_updown @@ -0,0 +1,224 @@ +#! /bin/sh +# updown script setting inbound marks on ESP traffic in the mangle chain +# +# Copyright (C) 2003-2004 Nigel Meteringham +# Copyright (C) 2003-2004 Tuomo Soini +# Copyright (C) 2002-2004 Michael Richardson +# Copyright (C) 2005-2010 Andreas Steffen <andreas.steffen@strongswan.org> +# +# This program is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by the +# Free Software Foundation; either version 2 of the License, or (at your +# option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY +# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +# for more details. + +# CAUTION: Installing a new version of strongSwan will install a new +# copy of this script, wiping out any custom changes you make. If +# you need changes, make a copy of this under another name, and customize +# that, and use the (left/right)updown parameters in ipsec.conf to make +# strongSwan use yours instead of this default one. + +# things that this script gets (from ipsec_pluto(8) man page) +# +# PLUTO_VERSION +# indicates what version of this interface is being +# used. This document describes version 1.1. This +# is upwardly compatible with version 1.0. +# +# PLUTO_VERB +# specifies the name of the operation to be performed +# (prepare-host, prepare-client, up-host, up-client, +# down-host, or down-client). If the address family +# for security gateway to security gateway communica- +# tions is IPv6, then a suffix of -v6 is added to the +# verb. +# +# PLUTO_CONNECTION +# is the name of the connection for which we are +# routing. +# +# PLUTO_NEXT_HOP +# is the next hop to which packets bound for the peer +# must be sent. +# +# PLUTO_INTERFACE +# is the name of the ipsec interface to be used. +# +# PLUTO_REQID +# is the requid of the ESP policy +# +# PLUTO_ME +# is the IP address of our host. +# +# PLUTO_MY_ID +# is the ID of our host. +# +# PLUTO_MY_CLIENT +# is the IP address / count of our client subnet. If +# the client is just the host, this will be the +# host's own IP address / max (where max is 32 for +# IPv4 and 128 for IPv6). +# +# PLUTO_MY_CLIENT_NET +# is the IP address of our client net. If the client +# is just the host, this will be the host's own IP +# address. +# +# PLUTO_MY_CLIENT_MASK +# is the mask for our client net. If the client is +# just the host, this will be 255.255.255.255. +# +# PLUTO_MY_SOURCEIP +# if non-empty, then the source address for the route will be +# set to this IP address. +# +# PLUTO_MY_PROTOCOL +# is the IP protocol that will be transported. +# +# PLUTO_MY_PORT +# is the UDP/TCP port to which the IPsec SA is +# restricted on our side. +# +# PLUTO_PEER +# is the IP address of our peer. +# +# PLUTO_PEER_ID +# is the ID of our peer. +# +# PLUTO_PEER_CA +# is the CA which issued the cert of our peer. +# +# PLUTO_PEER_CLIENT +# is the IP address / count of the peer's client sub- +# net. If the client is just the peer, this will be +# the peer's own IP address / max (where max is 32 +# for IPv4 and 128 for IPv6). +# +# PLUTO_PEER_CLIENT_NET +# is the IP address of the peer's client net. If the +# client is just the peer, this will be the peer's +# own IP address. +# +# PLUTO_PEER_CLIENT_MASK +# is the mask for the peer's client net. If the +# client is just the peer, this will be +# 255.255.255.255. +# +# PLUTO_PEER_PROTOCOL +# is the IP protocol that will be transported. +# +# PLUTO_PEER_PORT +# is the UDP/TCP port to which the IPsec SA is +# restricted on the peer side. +# +# PLUTO_XAUTH_ID +# is an optional user ID employed by the XAUTH protocol +# +# PLUTO_MARK_IN +# is an optional XFRM mark set on the inbound IPsec SA +# +# PLUTO_MARK_OUT +# is an optional XFRM mark set on the outbound IPsec SA +# +# PLUTO_ESP_ENC +# contains the remote UDP port in the case of ESP_IN_UDP +# encapsulation +# + +# define a minimum PATH environment in case it is not set +PATH="/sbin:/bin:/usr/sbin:/usr/bin:/usr/sbin" +export PATH + +# check parameter(s) +case "$1:$*" in +':') # no parameters + ;; +iptables:iptables) # due to (left/right)firewall; for default script only + ;; +custom:*) # custom parameters (see above CAUTION comment) + ;; +*) echo "$0: unknown parameters \`$*'" >&2 + exit 2 + ;; +esac + +# define NETMAP +SAME_NET=$PLUTO_PEER_CLIENT +IN_NET=$PLUTO_MY_CLIENT +OUT_NET="10.8.0.0/14" + +# define internal interface +INT_INTERFACE="eth1" + +# is there an inbound mark to be set? +if [ -n "$PLUTO_MARK_IN" ] +then + if [ -n "$PLUTO_UDP_ENC" ] + then + SET_MARK_IN="-p udp --sport $PLUTO_UDP_ENC" + else + SET_MARK_IN="-p esp" + fi + SET_MARK_IN="$SET_MARK_IN -s $PLUTO_PEER -j MARK --set-mark $PLUTO_MARK_IN" +fi + +# is there an outbound mark to be set? +if [ -n "$PLUTO_MARK_OUT" ] +then + SET_MARK_OUT="-i $INT_INTERFACE -s $SAME_NET -d $OUT_NET -j MARK --set-mark $PLUTO_MARK_OUT" +fi + +# resolve octal escape sequences +PLUTO_MY_ID=`printf "$PLUTO_MY_ID"` +PLUTO_PEER_ID=`printf "$PLUTO_PEER_ID"` + +# the big choice +case "$PLUTO_VERB:$1" in +up-client:) + # connection to my client subnet coming up + # If you are doing a custom version, firewall commands go here. + if [ -n "$PLUTO_MARK_IN" ] + then + iptables -t mangle -A PREROUTING $SET_MARK_IN + iptables -t nat -A PREROUTING -i $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_IN \ + -d $IN_NET -j NETMAP --to $SAME_NET + iptables -I FORWARD 1 -i $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_IN -j ACCEPT + iptables -t nat -A POSTROUTING -o $INT_INTERFACE -m mark --mark $PLUTO_MARK_IN \ + -s $SAME_NET -j NETMAP --to $OUT_NET + fi + if [ -n "$PLUTO_MARK_OUT" ] + then + iptables -t mangle -A PREROUTING $SET_MARK_OUT + iptables -t nat -A PREROUTING -i $INT_INTERFACE -m mark --mark $PLUTO_MARK_OUT \ + -d $OUT_NET -j NETMAP --to $SAME_NET + iptables -I FORWARD 1 -o $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_OUT -j ACCEPT + iptables -t nat -A POSTROUTING -o $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_OUT \ + -s $SAME_NET -j NETMAP --to $IN_NET + fi + ;; +down-client:) + # connection to my client subnet going down + # If you are doing a custom version, firewall commands go here. + if [ -n "$PLUTO_MARK_IN" ] + then + iptables -t mangle -D PREROUTING $SET_MARK_IN + iptables -t nat -D PREROUTING -i $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_IN \ + -d $IN_NET -j NETMAP --to $SAME_NET + iptables -D FORWARD -i $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_IN -j ACCEPT + iptables -t nat -D POSTROUTING -o eth1 -m mark --mark $PLUTO_MARK_IN \ + -s $SAME_NET -j NETMAP --to $OUT_NET + fi + if [ -n "$PLUTO_MARK_OUT" ] + then + iptables -t mangle -D PREROUTING $SET_MARK_OUT + iptables -D FORWARD -o $PLUTO_INTERFACE -m mark --mark $PLUTO_MARK_OUT -j ACCEPT + fi + ;; +*) echo "$0: unknown verb \`$PLUTO_VERB' or parameter \`$1'" >&2 + exit 1 + ;; +esac diff --git a/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/strongswan.conf b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/strongswan.conf new file mode 100644 index 000000000..cb17a9e07 --- /dev/null +++ b/testing/tests/ikev2/net2net-same-nets/hosts/sun/etc/strongswan.conf @@ -0,0 +1,6 @@ +# /etc/strongswan.conf - strongSwan configuration file + +charon { + load = curl aes des sha1 sha2 md5 pem pkcs1 gmp random x509 revocation hmac xcbc stroke kernel-netlink socket-default updown + multiple_authentication = no +} |