path: root/debian/strongswan-starter.postinst

#! /bin/bash
# postinst script for strongswan
#
# see: dh_installdeb(1)

set -e

# summary of how this script can be called:
#        * <postinst> `configure' <most-recently-configured-version>
#        * <old-postinst> `abort-upgrade' <new version>
#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
#          <new-version>
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see /usr/share/doc/packaging-manual/
#
# quoting from the policy:
#     Any necessary prompting should almost always be confined to the
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see /usr/share/doc/packaging-manual/
#
# quoting from the policy:
#     Any necessary prompting should almost always be confined to the
#     post-installation script, and should be protected with a conditional
#     so that unnecessary prompting doesn't happen if a package's
#     installation fails and the `postinst' is called with `abort-upgrade',
#     `abort-remove' or `abort-deconfigure'.

CONF_FILE=/var/lib/strongswan/ipsec.conf.inc
SECRETS_FILE=/var/lib/strongswan/ipsec.secrets.inc

Warn ()
{
    echo "$*" >&2
}

Error ()
{
    Warn "Error: $*"
}

insert_private_key_filename() {
	if ! ( [ -e $SECRETS_INC_FILE ] && egrep -q ": RSA $1" $SECRETS_INC_FILE ); then
            echo ": RSA $1" >> $SECRETS_INC_FILE
        fi
}

make_x509_cert() {
    if [ $# -ne 12 ]; then
        echo "Error in creating X.509 certificate"
        exit 1
    fi

    case $5 in
        false)
            certreq=$4.req
            selfsigned=""
        ;;
        true)
            certreq=$4
            selfsigned="-x509"
        ;;
        *)
            echo "Error in creating X.509 certificate"
            exit 1
        ;;
    esac

    echo -e "$6\n$7\n$8\n$9\n${10}\n${11}\n${12}\n\n\n" | \
      /usr/bin/openssl req -new -outform PEM -out $certreq \
                       -newkey rsa:$1 -nodes -keyout $3 -keyform PEM \
                       -days $2 $selfsigned >/dev/null
}

enable_daemon_start() {
    daemon=$1
    protocol=$2

    echo -n "Enabling ${protocol} support by pluto ... "
    if [ -e $CONF_FILE ] && egrep -q "^\w+${daemon}start=yes\w*$" $CONF_FILE; then
        echo "already enabled"
    elif [ -e $CONF_FILE ] && egrep -q "^\w+${daemon}start=no\w*$" $CONF_FILE; then
      	sed "s/${daemon}start=no/${daemon}start=yes/" < $CONF_FILE > $CONF_FILE.tmp
        cp $CONF_FILE.tmp $CONF_FILE
	rm $CONF_FILE.tmp
        echo "done"
    elif [ -e $CONF_FILE ] && egrep -q "^\w+#\w*${daemon}start=(yes|no)\w*$" $CONF_FILE; then
      	sed "s/^\w+#\w*${daemon}start=(yes|no)\w*$/\t${daemon}start=yes/" < $CONF_FILE > $CONF_FILE.tmp
        cp $CONF_FILE.tmp $CONF_FILE
	rm $CONF_FILE.tmp
        echo "done"
    elif [ ! -e $CONF_FILE ]; then
	echo -e "\t${daemon}start=yes" > $CONF_FILE
    else
        echo "ERROR: unknown or nonexistant ${daemon}start= directive, please fix manually!"
    fi
}

disable_daemon_start() {
    daemon=$1
    protocol=$2

    echo -n "Disabling ${protocol} support by pluto ... "
    if [ -e $CONF_FILE ] && ( egrep -q "^\w+${daemon}start=no\w*$" $CONF_FILE ||
       egrep -q "^\w+#\w*${daemon}start=(yes|no)\w*$" $CONF_FILE ); then
        echo "already disabled"
    elif [ -e $CONF_FILE ] && egrep -q "^\w+${daemon}start=yes\w*$" $CONF_FILE; then
      	sed "s/${daemon}start=yes/${daemon}start=no/" < $CONF_FILE > $CONF_FILE.tmp
        cp $CONF_FILE.tmp $CONF_FILE
	rm $CONF_FILE.tmp
        echo "done"
    elif [ ! -e $CONF_FILE ]; then
	echo -e "\t${daemon}start=yes" > $CONF_FILE
    else
        echo "ERROR: unknown or nonexistant ${daemon}start= directive, please fix manually!"
    fi
}

setup_strongswan_user() {
        if ! getent passwd strongswan >/dev/null; then
                adduser --quiet --system --no-create-home --home /var/lib/strongswan --shell /usr/sbin/nologin strongswan
        fi
}

. /usr/share/debconf/confmodule

case "$1" in
    configure)
	db_get strongswan/install_x509_certificate
	if [ "$RET" = "true" ]; then
	    db_get strongswan/how_to_get_x509_certificate
	    if [ "$RET" = "create" ]; then
                # extract the key from a (newly created) x509 certificate
		host=`hostname`
		newkeyfile="/etc/ipsec.d/private/${host}Key.pem"
       		newcertfile="/etc/ipsec.d/certs/${host}Cert.pem"
                if [ -e $newcertfile -o -e $newkeyfile ]; then
                    Error "$newcertfile or $newkeyfile already exists."
                    Error "Please remove them first an then re-run dpkg-reconfigure to create a new keypair."
                else
     			# create a new certificate
       			db_get strongswan/rsa_key_length
       			keylength=$RET
       			db_get strongswan/x509_self_signed
       			selfsigned=$RET
       			db_get strongswan/x509_country_code
       			countrycode=$RET
       			if [ -z "$countrycode" ]; then countrycode="."; fi
       			db_get strongswan/x509_state_name
       			statename=$RET
       			if [ -z "$statename" ]; then statename="."; fi
       			db_get strongswan/x509_locality_name
       			localityname=$RET
       			if [ -z "$localityname" ]; then localityname="."; fi
       			db_get strongswan/x509_organization_name
       			orgname=$RET
       			if [ -z "$orgname" ]; then orgname="."; fi
       			db_get strongswan/x509_organizational_unit
       			orgunit=$RET
       			if [ -z "$orgunit" ]; then orgunit="."; fi
       			db_get strongswan/x509_common_name
       			commonname=$RET
       			if [ -z "$commonname" ]; then commonname="."; fi
       			db_get strongswan/x509_email_address
       			email=$RET
       			if [ -z "$email" ]; then email="."; fi
       			make_x509_cert $keylength 1500 "$newkeyfile" "$newcertfile" "$selfsigned" "$countrycode" "$statename" "$localityname" "$orgname" "$orgunit" "$commonname" "$email"
       			chmod 0600 "$newkeyfile"
       			umask 077
       			insert_private_key_filename "$newkeyfile"
       			echo "Successfully created x509 certificate."
       		fi
       	    elif [ "$RET" = "import" ]; then
		# existing certificate - use it
		db_get strongswan/existing_x509_certificate_filename
		certfile=$RET
		db_get strongswan/existing_x509_key_filename
		keyfile=$RET
		db_get strongswan/existing_x509_rootca_filename
		cafile=$RET

		if [ ! "$certfile" ] || [ ! "$keyfile" ]; then
		    Error "Either the certificate or the key filename is not specified."
		elif ! ( ( [ -f "$certfile" ] || [ -L "$certfile" ] ) && ( [ -f "$keyfile" ] || [ -L "$keyfile" ] ) && ( [ "$cafile" = "" ] || ( [ -f "$cafile" ] || [ -L "$cafile" ] ) ) ); then
		    Error "Either the certificate or the key"${cafile:+ or the rootca}" file is not a regular file or symbolic link."
		elif [ ! "`grep 'BEGIN CERTIFICATE' $certfile`" ] || [ ! "`grep 'BEGIN RSA PRIVATE KEY' $keyfile`" ] || ( [ "$cafile" != "" ] && [ ! "`grep 'BEGIN CERTIFICATE' $cafile`" ] ); then
		    Error "Either the certificate or the key"${cafile:+ or the rootca}" file is not a valid PEM type file."
		elif [ "$cafile" ] && ( [ "$certfile" = "$cafile" ] || [ "$keyfile" = "$cafile" ]); then
		    Error "The certificate or the key file contains the rootca - unable to import automatically."
		elif [ "`grep 'BEGIN CERTIFICATE' $certfile | wc -l`" -gt 1 ]; then
		    Error "The certificate file contains more than one certificate - unable to import automatically."
		elif [ "`grep 'ENCRYPTED' $keyfile`" ]; then
		    Error "The key file contains an encrypted key - unable to import automatically."
		else
		    newcertfile="/etc/ipsec.d/certs/$(basename "$certfile")"
		    newkeyfile="/etc/ipsec.d/private/$(basename "$keyfile")"
		    if [ "$cafile" ]; then
			newcafile="/etc/ipsec.d/private/$(basename "$cafile")"
		    else
			newcafile=""
		    fi

		    if [ -e "$newcertfile" ] || [ -e "$newkeyfile" ] || ( [ "$newcafile" != "" ] && [ -e "$newcafile" ] ); then
			Error "$newcertfile or $newkeyfile"${newcafile:+ or $newcafile}" already exists."
			Error "Please remove them first and then re-run dpkg-reconfigure to extract an existing keypair"${newcafile:+ and a rootca}"."
		    else
			openssl x509 -in $certfile -out $newcertfile 2>/dev/null
			umask 077
			openssl rsa -passin pass:"" -in $keyfile -out $newkeyfile 2>/dev/null
			chmod 0600 "$newkeyfile"
			insert_private_key_filename "$newkeyfile"
			cp "$cafile" /etc/ipsec.d/cacerts
			echo "Successfully integrated existing x509 certificate."
		    fi
		fi
            fi
	    db_set strongswan/install_x509_certificate false
	fi

	# lets see if we are already using dependency based booting or the correct runlevel parameters
	if ! ( [ "`find /etc/init.d/ -name '.depend.*'`" ] || [ "$runlevels" = "0K841K842S163S164S165S166K84" ] ); then
	    db_fset strongswan/runlevel_changes seen false
	    db_input high strongswan/runlevel_changes || true
	    db_go

	    # if the admin did not change the runlevels which got installed by older packages we can modify them
	    if [ "$runlevels" = "0K346K34SS41" ] || [ "$runlevels" = "0K301K302S153S154S155S156K30" ] || [ "$runlevels" = "0K191K192S213S214S215S216K19" ]; then
		update-rc.d -f ipsec remove
	    fi

	    update-rc.d ipsec defaults 16 84 > /dev/null
	fi

        db_get strongswan/enable-oe
        if [ "$RET" != "true" ]; then
            echo -n "Disabling opportunistic encryption (OE) in config file ... "
            if [ -e $CONF_FILE ] && egrep -q "include /etc/ipsec.d/examples/no_oe.conf$" $CONF_FILE; then
                # also update to new-style config
                sed 's/.*include \/etc\/ipsec.d\/examples\/no_oe.conf/#include \/etc\/ipsec.d\/examples\/oe.conf/' < $CONF_FILE > $CONF_FILE.tmp
                mv $CONF_FILE.tmp $CONF_FILE
                echo -n "converted old config line to new format"
            fi
            if [ -e $CONF_FILE ] && egrep -q "^include /etc/ipsec.d/examples/oe.conf$" $CONF_FILE; then
            	sed 's/include \/etc\/ipsec.d\/examples\/oe.conf/#include \/etc\/ipsec.d\/examples\/oe.conf/' < $CONF_FILE > $CONF_FILE.tmp
                mv $CONF_FILE.tmp $CONF_FILE
                echo "done"
            elif [ ! -e $CONF_FILE ]; then
                echo "#include /etc/ipsec.d/examples/oe.conf" > $CONF_FILE
            else
                echo "already disabled"
            fi
	else
            echo -n "Enabling opportunistic encryption (OE) in config file ... "
            if [ -e $CONF_FILE ] && egrep -q "include /etc/ipsec.d/examples/no_oe.conf$" $CONF_FILE; then
                # also update to new-style config
            	sed 's/.*include \/etc\/ipsec.d\/examples\/no_oe.conf/include \/etc\/ipsec.d\/examples\/oe.conf/' < $CONF_FILE > $CONF_FILE.tmp
                mv $CONF_FILE.tmp $CONF_FILE
                echo -n "converted old config line to new format"
            fi
            if [ -e $CONF_FILE ] && egrep -q "^include /etc/ipsec.d/examples/oe.conf$" $CONF_FILE; then
                echo "already enabled"
            elif [ -e $CONF_FILE ] && egrep -q "^#.*include /etc/ipsec.d/examples/oe.conf$" $CONF_FILE; then
            	sed 's/#.*include \/etc\/ipsec.d\/examples\/oe.conf/include \/etc\/ipsec.d\/examples\/oe.conf/' < $CONF_FILE > $CONF_FILE.tmp
                mv $CONF_FILE.tmp $CONF_FILE
                echo "done"
            elif [ ! -e $CONF_FILE ]; then
                echo "include /etc/ipsec.d/examples/oe.conf" > $CONF_FILE
            else
                cat <<EOF >> $CONF_FILE
#Enable Opportunistic Encryption
include /etc/ipsec.d/examples/oe.conf
EOF
              echo "done"
            fi
        fi

	# disabled for now, until we can solve the don't-edit-conffiles issue
        #db_get strongswan/ikev1
        #if [ "$RET" != "true" ]; then
        #    enable_daemon_start "pluto" "IKEv1"
	#else
        #    disable_daemon_start "pluto" "IKEv1"
        #fi
        #db_get strongswan/ikev2
        #if [ "$RET" != "true" ]; then
        #    enable_daemon_start "charon" "IKEv2"
	#else
        #    disable_daemon_start "charon" "IKEv2"
        #fi

	# create user for strongswan to change its uid into
	setup_strongswan_user

	if [ -z "$2" ]; then
	    # no old configured version - start strongswan now
            invoke-rc.d ipsec start || true
        else
  	    # does the user wish strongswan to restart?
	    db_get strongswan/restart
	    if [ "$RET" = "true" ]; then
	         invoke-rc.d ipsec restart || true # sure, we'll restart it for you
	    fi
	fi

        db_stop

    ;;

    abort-upgrade|abort-remove|abort-deconfigure)

    ;;

    *)
        echo "postinst called with unknown argument '$1'" >&2
        exit 0
    ;;
esac

# dh_installdeb will replace this with shell code automatically

#DEBHELPER#

exit 0