diff options
Diffstat (limited to 'docs')
| -rw-r--r-- | docs/vyos.vyos.vyos_interfaces_module.rst | 994 |
1 files changed, 374 insertions, 620 deletions
diff --git a/docs/vyos.vyos.vyos_interfaces_module.rst b/docs/vyos.vyos.vyos_interfaces_module.rst index d1cdf0b..1203c20 100644 --- a/docs/vyos.vyos.vyos_interfaces_module.rst +++ b/docs/vyos.vyos.vyos_interfaces_module.rst @@ -313,6 +313,7 @@ Notes .. note:: - Tested against VyOS 1.1.8 (helium). - This module works with connection ``ansible.netcommon.network_cli``. See `the VyOS OS Platform Options <../network/user_guide/platform_vyos.html>`_. + - The examples use the stdout_callback as yaml to produce task outputs. @@ -322,24 +323,22 @@ Examples .. code-block:: yaml # Using merged - # - # ------------- + # Before state: # ------------- - # # vyos@vyos:~$ show configuration commands | grep interfaces + # set interfaces bonding 'bond0' + # set interfaces bonding 'bond1' + # set interfaces bonding bond2 'ip' + # set interfaces bonding bond2 'ipv6' # set interfaces ethernet eth0 address 'dhcp' - # set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 duplex 'auto' - # set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' - # set interfaces ethernet eth0 smp-affinity 'auto' + # set interfaces ethernet eth0 'ip' + # set interfaces ethernet eth0 'ipv6' + # set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' - # set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' - # set interfaces ethernet eth1 smp-affinity 'auto' - # set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' - # set interfaces ethernet eth2 smp-affinity 'auto' - # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' - # set interfaces loopback lo + # set interfaces ethernet 'eth1' + # set interfaces ethernet 'eth2' - name: Merge provided configuration with device configuration vyos.vyos.vyos_interfaces: @@ -350,115 +349,74 @@ Examples vifs: - vlan_id: 200 description: VIF 200 - ETH2 - - name: eth3 description: Configured by Ansible mtu: 1500 - - name: bond1 description: Bond - 1 mtu: 1200 - - name: vti2 description: VTI - 2 enabled: false state: merged - # - # - # ------------------------- - # Module Execution Result - # ------------------------- - # - # "before": [ - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "enabled": true, - # "name": "eth3" - # }, - # { - # "enabled": true, - # "name": "eth2" - # }, - # { - # "enabled": true, - # "name": "eth1" - # }, - # { - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # "commands": [ - # "set interfaces ethernet eth2 description 'Configured by Ansible'", - # "set interfaces ethernet eth2 vif 200", - # "set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'", - # "set interfaces ethernet eth3 description 'Configured by Ansible'", - # "set interfaces ethernet eth3 mtu '1500'", - # "set interfaces bonding bond1", - # "set interfaces bonding bond1 description 'Bond - 1'", - # "set interfaces bonding bond1 mtu '1200'", - # "set interfaces vti vti2", - # "set interfaces vti vti2 description 'VTI - 2'", - # "set interfaces vti vti2 disable" - # ] - # - # "after": [ - # { - # "description": "Bond - 1", - # "enabled": true, - # "mtu": 1200, - # "name": "bond1" - # }, - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "description": "VTI - 2", - # "enabled": false, - # "name": "vti2" - # }, - # { - # "description": "Configured by Ansible", - # "enabled": true, - # "mtu": 1500, - # "name": "eth3" - # }, - # { - # "description": "Configured by Ansible", - # "enabled": true, - # "name": "eth2", - # "vifs": [ - # { - # "description": "VIF 200 - ETH2", - # "enabled": true, - # "vlan_id": "200" - # } - # ] - # }, - # { - # "enabled": true, - # "name": "eth1" - # }, - # { - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # - # ------------- + + # Task Output + # ----------- + # before: + # - enabled: true + # name: lo + # - enabled: true + # name: eth3 + # - enabled: true + # name: eth2 + # - enabled: true + # name: eth1 + # - duplex: auto + # enabled: true + # name: eth0 + # speed: auto + # commands: + # - set interfaces ethernet eth2 description 'Configured by Ansible' + # - set interfaces ethernet eth2 vif 200 + # - set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' + # - set interfaces ethernet eth3 description 'Configured by Ansible' + # - set interfaces ethernet eth3 mtu '1500' + # - set interfaces bonding bond1 + # - set interfaces bonding bond1 description 'Bond - 1' + # - set interfaces bonding bond1 mtu '1200' + # - set interfaces vti vti2 + # - set interfaces vti vti2 description 'VTI - 2' + # - set interfaces vti vti2 disable + # after: + # - description: Bond - 1 + # enabled: true + # mtu: 1200 + # name: bond1 + # - enabled: true + # name: lo + # - description: VTI - 2 + # enabled: false + # name: vti2 + # - description: Configured by Ansible + # enabled: true + # mtu: 1500 + # name: eth3 + # - description: Configured by Ansible + # enabled: true + # name: eth2 + # vifs: + # - description: VIF 200 - ETH2 + # enabled: true + # vlan_id: '200' + # - enabled: true + # name: eth1 + # - duplex: auto + # enabled: true + # name: eth0 + # speed: auto + # After state: - # ------------- - # + # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1200' @@ -480,15 +438,11 @@ Examples # set interfaces loopback lo # set interfaces vti vti2 description 'VTI - 2' # set interfaces vti vti2 disable - # # Using replaced - # - # ------------- # Before state: # ------------- - # # vyos:~$ show configuration commands | grep eth # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' @@ -517,137 +471,93 @@ Examples # set interfaces ethernet eth3 smp_affinity 'auto' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - # - # + - name: Replace device configurations of listed interfaces with provided configurations vyos.vyos.vyos_interfaces: config: - name: eth2 description: Replaced by Ansible - - name: eth3 description: Replaced by Ansible - - name: eth1 description: Replaced by Ansible state: replaced - # - # - # ----------------------- - # Module Execution Result - # ----------------------- - # - # "before": [ - # { - # "description": "Bond - 1", - # "enabled": true, - # "mtu": 1400, - # "name": "bond1" - # }, - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "description": "Configured by Ansible", - # "duplex": "full", - # "enabled": true, - # "mtu": 1500, - # "name": "eth3", - # "speed": "100" - # }, - # { - # "description": "Configured by Ansible", - # "duplex": "full", - # "enabled": true, - # "mtu": 500, - # "name": "eth2", - # "speed": "100", - # "vifs": [ - # { - # "description": "VIF 200 - ETH2", - # "enabled": true, - # "vlan_id": "200" - # } - # ] - # }, - # { - # "description": "Configured by Ansible Eng Team", - # "duplex": "full", - # "enabled": true, - # "name": "eth1", - # "speed": "100" - # }, - # { - # "description": "Management Interface for the Appliance", - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # "commands": [ - # "delete interfaces ethernet eth2 speed", - # "delete interfaces ethernet eth2 duplex", - # "delete interfaces ethernet eth2 mtu", - # "delete interfaces ethernet eth2 vif 200 description", - # "set interfaces ethernet eth2 description 'Replaced by Ansible'", - # "delete interfaces ethernet eth3 speed", - # "delete interfaces ethernet eth3 duplex", - # "delete interfaces ethernet eth3 mtu", - # "set interfaces ethernet eth3 description 'Replaced by Ansible'", - # "delete interfaces ethernet eth1 speed", - # "delete interfaces ethernet eth1 duplex", - # "set interfaces ethernet eth1 description 'Replaced by Ansible'" - # ] - # - # "after": [ - # { - # "description": "Bond - 1", - # "enabled": true, - # "mtu": 1400, - # "name": "bond1" - # }, - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "description": "Replaced by Ansible", - # "enabled": true, - # "name": "eth3" - # }, - # { - # "description": "Replaced by Ansible", - # "enabled": true, - # "name": "eth2", - # "vifs": [ - # { - # "enabled": true, - # "vlan_id": "200" - # } - # ] - # }, - # { - # "description": "Replaced by Ansible", - # "enabled": true, - # "name": "eth1" - # }, - # { - # "description": "Management Interface for the Appliance", - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # - # ------------- + + # Task Output + # ----------- + # before: + # - description: Bond - 1 + # enabled: true + # mtu: 1400 + # name: bond1 + # - enabled: true + # name: lo + # - description: Configured by Ansible + # duplex: full + # enabled: true + # mtu: 1500 + # name: eth3 + # speed: '100' + # - description: Configured by Ansible + # duplex: full + # enabled: true + # mtu: 500 + # name: eth2 + # speed: '100' + # vifs: + # - description: VIF 200 - ETH2 + # enabled: true + # vlan_id: '200' + # - description: Configured by Ansible Eng Team + # duplex: full + # enabled: true + # name: eth1 + # speed: '100' + # - description: Management Interface for the Appliance + # duplex: auto + # enabled: true + # name: eth0 + # speed: auto + # commands: + # - delete interfaces ethernet eth2 speed + # - delete interfaces ethernet eth2 duplex + # - delete interfaces ethernet eth2 mtu + # - delete interfaces ethernet eth2 vif 200 description + # - set interfaces ethernet eth2 description 'Replaced by Ansible' + # - delete interfaces ethernet eth3 speed + # - delete interfaces ethernet eth3 duplex + # - delete interfaces ethernet eth3 mtu + # - set interfaces ethernet eth3 description 'Replaced by Ansible' + # - delete interfaces ethernet eth1 speed + # - delete interfaces ethernet eth1 duplex + # - set interfaces ethernet eth1 description 'Replaced by Ansible' + # after: + # - description: Bond - 1 + # enabled: true + # mtu: 1400 + # name: bond1 + # - enabled: true + # name: lo + # - description: Replaced by Ansible + # enabled: true + # name: eth3 + # - description: Replaced by Ansible + # enabled: true + # name: eth2 + # vifs: + # - enabled: true + # vlan_id: '200' + # - description: Replaced by Ansible + # enabled: true + # name: eth1 + # - description: Management Interface for the Appliance + # duplex: auto + # enabled: true + # name: eth0 + # speed: auto + # After state: - # ------------- - # + # ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' @@ -668,15 +578,12 @@ Examples # set interfaces ethernet eth3 description 'Replaced by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo - # - # + + # Using overridden - # - # - # -------------- - # Before state - # -------------- - # + + # Before state: + # ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' @@ -702,8 +609,7 @@ Examples # set interfaces loopback lo # set interfaces vti vti1 description 'Virtual Tunnel Interface - 1' # set interfaces vti vti1 mtu '68' - # - # + - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_interfaces: config: @@ -711,127 +617,84 @@ Examples description: Outbound Interface For The Appliance speed: auto duplex: auto - - name: eth2 speed: auto duplex: auto - - name: eth3 mtu: 1200 state: overridden - # - # - # ------------------------ - # Module Execution Result - # ------------------------ - # - # "before": [ - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "description": "Virtual Tunnel Interface - 1", - # "enabled": true, - # "mtu": 68, - # "name": "vti1" - # }, - # { - # "description": "Configured by Ansible Network", - # "enabled": true, - # "name": "eth3" - # }, - # { - # "description": "Configured by Ansible Team (Admin Down)", - # "enabled": false, - # "mtu": 600, - # "name": "eth2" - # }, - # { - # "description": "Configured by Ansible Eng Team", - # "enabled": true, - # "mtu": 100, - # "name": "eth1", - # "vifs": [ - # { - # "description": "VIF 100 - ETH1", - # "enabled": false, - # "vlan_id": "100" - # } - # ] - # }, - # { - # "description": "Ethernet Interface - 0", - # "duplex": "auto", - # "enabled": true, - # "mtu": 1200, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # "commands": [ - # "delete interfaces vti vti1 description", - # "delete interfaces vti vti1 mtu", - # "delete interfaces ethernet eth1 description", - # "delete interfaces ethernet eth1 mtu", - # "delete interfaces ethernet eth1 vif 100 description", - # "delete interfaces ethernet eth1 vif 100 disable", - # "delete interfaces ethernet eth0 mtu", - # "set interfaces ethernet eth0 description 'Outbound Interface For The Appliance'", - # "delete interfaces ethernet eth2 description", - # "delete interfaces ethernet eth2 mtu", - # "set interfaces ethernet eth2 duplex 'auto'", - # "delete interfaces ethernet eth2 disable", - # "set interfaces ethernet eth2 speed 'auto'", - # "delete interfaces ethernet eth3 description", - # "set interfaces ethernet eth3 mtu '1200'" - # ], - # - # "after": [ - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "enabled": true, - # "name": "vti1" - # }, - # { - # "enabled": true, - # "mtu": 1200, - # "name": "eth3" - # }, - # { - # "duplex": "auto", - # "enabled": true, - # "name": "eth2", - # "speed": "auto" - # }, - # { - # "enabled": true, - # "name": "eth1", - # "vifs": [ - # { - # "enabled": true, - # "vlan_id": "100" - # } - # ] - # }, - # { - # "description": "Outbound Interface For The Appliance", - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # - # ------------ - # After state + + # Task Output + # ----------- + # before: + # - enabled: true + # name: lo + # - description: Virtual Tunnel Interface - 1 + # enabled: true + # mtu: 68 + # name: vti1 + # - description: Configured by Ansible Network + # enabled: true + # name: eth3 + # - description: Configured by Ansible Team (Admin Down) + # enabled: false + # mtu: 600 + # name: eth2 + # - description: Configured by Ansible Eng Team + # enabled: true + # mtu: 100 + # name: eth1 + # vifs: + # - description: VIF 100 - ETH1 + # enabled: false + # vlan_id: '100' + # - description: Ethernet Interface - 0 + # duplex: auto + # enabled: true + # mtu: 1200 + # name: eth0 + # speed: auto + # commands: + # - delete interfaces vti vti1 description + # - delete interfaces vti vti1 mtu + # - delete interfaces ethernet eth1 description + # - delete interfaces ethernet eth1 mtu + # - delete interfaces ethernet eth1 vif 100 description + # - delete interfaces ethernet eth1 vif 100 disable + # - delete interfaces ethernet eth0 mtu + # - set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' + # - delete interfaces ethernet eth2 description + # - delete interfaces ethernet eth2 mtu + # - set interfaces ethernet eth2 duplex 'auto' + # - delete interfaces ethernet eth2 disable + # - set interfaces ethernet eth2 speed 'auto' + # - delete interfaces ethernet eth3 description + # - set interfaces ethernet eth3 mtu '1200' + # after: + # - enabled: true + # name: lo + # - enabled: true + # name: vti1 + # - enabled: true + # mtu: 1200 + # name: eth3 + # - duplex: auto + # enabled: true + # name: eth2 + # speed: auto + # - enabled: true + # name: eth1 + # vifs: + # - enabled: true + # vlan_id: '100' + # - description: Outbound Interface For The Appliance + # duplex: auto + # enabled: true + # name: eth0 + # speed: auto + + # After state: # ------------ - # # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' @@ -851,15 +714,12 @@ Examples # set interfaces ethernet eth3 mtu '1200' # set interfaces loopback lo # set interfaces vti vti1 - # - # + + # Using deleted - # - # - # ------------- - # Before state + + # Before state: # ------------- - # # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 description 'LAG - 1' @@ -887,130 +747,87 @@ Examples # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo - # - # + - name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves) vyos.vyos.vyos_interfaces: config: - name: bond1 - - name: eth1 - - name: eth2 - - name: eth3 state: deleted - # - # - # ------------------------ - # Module Execution Results - # ------------------------ - # - # "before": [ - # { - # "enabled": true, - # "mtu": 1300, - # "name": "bond0" - # }, - # { - # "description": "LAG - 1", - # "enabled": true, - # "name": "bond1" - # }, - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "description": "Configured by Ansible Network", - # "duplex": "full", - # "enabled": true, - # "name": "eth3", - # "speed": "100" - # }, - # { - # "description": "Configured by Ansible", - # "duplex": "full", - # "enabled": false, - # "mtu": 600, - # "name": "eth2", - # "speed": "100" - # }, - # { - # "description": "Configured by Ansible Network", - # "duplex": "full", - # "enabled": true, - # "name": "eth1", - # "speed": "100" - # }, - # { - # "description": "Outbound Interface for this appliance", - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # "commands": [ - # "delete interfaces bonding bond1 description", - # "delete interfaces ethernet eth1 speed", - # "delete interfaces ethernet eth1 duplex", - # "delete interfaces ethernet eth1 description", - # "delete interfaces ethernet eth2 speed", - # "delete interfaces ethernet eth2 disable", - # "delete interfaces ethernet eth2 duplex", - # "delete interfaces ethernet eth2 disable", - # "delete interfaces ethernet eth2 description", - # "delete interfaces ethernet eth2 disable", - # "delete interfaces ethernet eth2 mtu", - # "delete interfaces ethernet eth2 disable", - # "delete interfaces ethernet eth3 speed", - # "delete interfaces ethernet eth3 duplex", - # "delete interfaces ethernet eth3 description" - # ] - # - # "after": [ - # { - # "enabled": true, - # "mtu": 1300, - # "name": "bond0" - # }, - # { - # "enabled": true, - # "name": "bond1" - # }, - # { - # "enabled": true, - # "name": "lo" - # }, - # { - # "enabled": true, - # "name": "eth3" - # }, - # { - # "enabled": true, - # "name": "eth2" - # }, - # { - # "enabled": true, - # "name": "eth1" - # }, - # { - # "description": "Outbound Interface for this appliance", - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # - # ------------ - # After state + + # Task Output + # ----------- + # before: + # - enabled: true + # mtu: 1300 + # name: bond0 + # - description: LAG - 1 + # enabled: true + # name: bond1 + # - enabled: true + # name: lo + # - description: Configured by Ansible Network + # duplex: full + # enabled: true + # name: eth3 + # speed: '100' + # - description: Configured by Ansible + # duplex: full + # enabled: false + # mtu: 600 + # name: eth2 + # speed: '100' + # - description: Configured by Ansible Network + # duplex: full + # enabled: true + # name: eth1 + # speed: '100' + # - description: Outbound Interface for this appliance + # duplex: auto + # enabled: true + # name: eth0 + # speed: auto + # commands: + # - delete interfaces bonding bond1 description + # - delete interfaces ethernet eth1 speed + # - delete interfaces ethernet eth1 duplex + # - delete interfaces ethernet eth1 description + # - delete interfaces ethernet eth2 speed + # - delete interfaces ethernet eth2 disable + # - delete interfaces ethernet eth2 duplex + # - delete interfaces ethernet eth2 disable + # - delete interfaces ethernet eth2 description + # - delete interfaces ethernet eth2 disable + # - delete interfaces ethernet eth2 mtu + # - delete interfaces ethernet eth2 disable + # - delete interfaces ethernet eth3 speed + # - delete interfaces ethernet eth3 duplex + # - delete interfaces ethernet eth3 description + # after: + # - enabled: true + # mtu: 1300 + # name: bond0 + # - enabled: true + # name: bond1 + # - enabled: true + # name: lo + # - enabled: true + # name: eth3 + # - enabled: true + # name: eth2 + # - enabled: true + # name: eth1 + # - description: Outbound Interface for this appliance + # duplex: auto + # enabled: true + # name: eth0 + # speed: auto + + # After state: # ------------ - # # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 @@ -1027,15 +844,12 @@ Examples # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo - # - # # Using gathered - # + # Before state: # ------------- - # # vyos@192# run show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' @@ -1057,76 +871,38 @@ Examples vyos.vyos.vyos_interfaces: config: state: gathered - # - # - # ------------------------- - # Module Execution Result - # ------------------------- - # - # "gathered": [ - # { - # "description": "Configured by Ansible", - # "duplex": "auto", - # "enabled": true, - # "mtu": 1500, - # "name": "eth2", - # "speed": "auto", - # "vifs": [ - # { - # "description": "VIF - 200", - # "enabled": true, - # "vlan_id": 200 - # } - # ] - # }, - # { - # "description": "Configured by Ansible", - # "duplex": "auto", - # "enabled": true, - # "mtu": 1500, - # "name": "eth1", - # "speed": "auto", - # "vifs": [ - # { - # "description": "VIF - 200", - # "enabled": true, - # "vlan_id": 200 - # } - # ] - # }, - # { - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] - # - # - # After state: - # ------------- - # - # vyos@192# run show configuration commands | grep interfaces - # set interfaces ethernet eth0 address 'dhcp' - # set interfaces ethernet eth0 duplex 'auto' - # set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' - # set interfaces ethernet eth0 smp_affinity 'auto' - # set interfaces ethernet eth0 speed 'auto' - # set interfaces ethernet eth1 description 'Configured by Ansible' - # set interfaces ethernet eth1 duplex 'auto' - # set interfaces ethernet eth1 mtu '1500' - # set interfaces ethernet eth1 speed 'auto' - # set interfaces ethernet eth1 vif 200 description 'VIF - 200' - # set interfaces ethernet eth2 description 'Configured by Ansible' - # set interfaces ethernet eth2 duplex 'auto' - # set interfaces ethernet eth2 mtu '1500' - # set interfaces ethernet eth2 speed 'auto' - # set interfaces ethernet eth2 vif 200 description 'VIF - 200' + + # Task output + # ----------- + # gathered: + # - description: Configured by Ansible + # duplex: auto + # enabled: true + # mtu: 1500 + # name: eth2 + # speed: auto + # vifs: + # - description: VIF - 200 + # enabled: true + # vlan_id: 200 + # - description: Configured by Ansible + # duplex: auto + # enabled: true + # mtu: 1500 + # name: eth1 + # speed: auto + # vifs: + # - description: VIF - 200 + # enabled: true + # vlan_id: 200 + # - duplex: auto + # enabled: true + # name: eth0 + # speed: auto # Using rendered - # - # + - name: Render the commands for provided configuration vyos.vyos.vyos_interfaces: config: @@ -1153,34 +929,29 @@ Examples mtu: 600 enabled: false state: rendered - # - # - # ------------------------- - # Module Execution Result - # ------------------------- - # - # - # "rendered": [ - # "set interfaces ethernet eth0 duplex 'auto'", - # "set interfaces ethernet eth0 speed 'auto'", - # "delete interfaces ethernet eth0 disable", - # "set interfaces ethernet eth1 duplex 'auto'", - # "delete interfaces ethernet eth1 disable", - # "set interfaces ethernet eth1 speed 'auto'", - # "set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1'", - # "set interfaces ethernet eth1 mtu '1500'", - # "set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100'", - # "set interfaces ethernet eth1 vif 100 mtu '400'", - # "set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101'", - # "set interfaces ethernet eth2 disable", - # "set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN DOWN)'", - # "set interfaces ethernet eth2 mtu '600'" - # ] + + # Task Output + # ----------- + # rendered: + # - set interfaces ethernet eth0 duplex 'auto' + # - set interfaces ethernet eth0 speed 'auto' + # - delete interfaces ethernet eth0 disable + # - set interfaces ethernet eth1 duplex 'auto' + # - delete interfaces ethernet eth1 disable + # - set interfaces ethernet eth1 speed 'auto' + # - set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1' + # - set interfaces ethernet eth1 mtu '1500' + # - set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100' + # - set interfaces ethernet eth1 vif 100 mtu '400' + # - set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101' + # - set interfaces ethernet eth2 disable + # - set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN + # DOWN)' + # - set interfaces ethernet eth2 mtu '600' # Using parsed - # - # + - name: Parse the configuration. vyos.vyos.vyos_interfaces: running_config: @@ -1200,51 +971,34 @@ Examples set interfaces ethernet eth2 speed 'auto' set interfaces ethernet eth2 vif 200 description 'VIF - 200'" state: parsed - # - # - # ------------------------- - # Module Execution Result - # ------------------------- - # - # - # "parsed": [ - # { - # "description": "Configured by Ansible", - # "duplex": "auto", - # "enabled": true, - # "mtu": 1500, - # "name": "eth2", - # "speed": "auto", - # "vifs": [ - # { - # "description": "VIF - 200", - # "enabled": true, - # "vlan_id": 200 - # } - # ] - # }, - # { - # "description": "Configured by Ansible", - # "duplex": "auto", - # "enabled": true, - # "mtu": 1500, - # "name": "eth1", - # "speed": "auto", - # "vifs": [ - # { - # "description": "VIF - 200", - # "enabled": true, - # "vlan_id": 200 - # } - # ] - # }, - # { - # "duplex": "auto", - # "enabled": true, - # "name": "eth0", - # "speed": "auto" - # } - # ] + + # Task output + # ----------- + # parsed: + # - description: Configured by Ansible + # duplex: auto + # enabled: true + # mtu: 1500 + # name: eth2 + # speed: auto + # vifs: + # - description: VIF - 200 + # enabled: true + # vlan_id: 200 + # - description: Configured by Ansible + # duplex: auto + # enabled: true + # mtu: 1500 + # name: eth1 + # speed: auto + # vifs: + # - description: VIF - 200 + # enabled: true + # vlan_id: 200 + # - duplex: auto + # enabled: true + # name: eth0 + # speed: auto |