diff options
Diffstat (limited to 'plugins')
| -rw-r--r-- | plugins/modules/vyos_interfaces.py | 996 |
1 files changed, 375 insertions, 621 deletions
diff --git a/plugins/modules/vyos_interfaces.py b/plugins/modules/vyos_interfaces.py index 47ff604f..f0772ab5 100644 --- a/plugins/modules/vyos_interfaces.py +++ b/plugins/modules/vyos_interfaces.py @@ -42,6 +42,7 @@ version_added: 1.0.0 notes: - Tested against VyOS 1.1.8 (helium). - This module works with connection C(ansible.netcommon.network_cli). See L(the VyOS OS Platform Options,../network/user_guide/platform_vyos.html). +- The examples use the stdout_callback as yaml to produce task outputs. author: - Nilashish Chakraborty (@nilashishc) - Rohit Thakur (@rohitthakur2590) @@ -143,26 +144,25 @@ options: - parsed default: merged """ + EXAMPLES = """ # Using merged -# -# ------------- + # Before state: # ------------- -# # vyos@vyos:~$ show configuration commands | grep interfaces +# set interfaces bonding 'bond0' +# set interfaces bonding 'bond1' +# set interfaces bonding bond2 'ip' +# set interfaces bonding bond2 'ipv6' # set interfaces ethernet eth0 address 'dhcp' -# set interfaces ethernet eth0 address 'dhcpv6' # set interfaces ethernet eth0 duplex 'auto' -# set interfaces ethernet eth0 hw-id '08:00:27:30:f0:22' -# set interfaces ethernet eth0 smp-affinity 'auto' +# set interfaces ethernet eth0 'ip' +# set interfaces ethernet eth0 'ipv6' +# set interfaces ethernet eth0 smp_affinity 'auto' # set interfaces ethernet eth0 speed 'auto' -# set interfaces ethernet eth1 hw-id '08:00:27:ea:0f:b9' -# set interfaces ethernet eth1 smp-affinity 'auto' -# set interfaces ethernet eth2 hw-id '08:00:27:c2:98:23' -# set interfaces ethernet eth2 smp-affinity 'auto' -# set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' -# set interfaces loopback lo +# set interfaces ethernet 'eth1' +# set interfaces ethernet 'eth2' - name: Merge provided configuration with device configuration vyos.vyos.vyos_interfaces: @@ -173,115 +173,74 @@ EXAMPLES = """ vifs: - vlan_id: 200 description: VIF 200 - ETH2 - - name: eth3 description: Configured by Ansible mtu: 1500 - - name: bond1 description: Bond - 1 mtu: 1200 - - name: vti2 description: VTI - 2 enabled: false state: merged -# -# -# ------------------------- -# Module Execution Result -# ------------------------- -# -# "before": [ -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "enabled": true, -# "name": "eth3" -# }, -# { -# "enabled": true, -# "name": "eth2" -# }, -# { -# "enabled": true, -# "name": "eth1" -# }, -# { -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# "commands": [ -# "set interfaces ethernet eth2 description 'Configured by Ansible'", -# "set interfaces ethernet eth2 vif 200", -# "set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2'", -# "set interfaces ethernet eth3 description 'Configured by Ansible'", -# "set interfaces ethernet eth3 mtu '1500'", -# "set interfaces bonding bond1", -# "set interfaces bonding bond1 description 'Bond - 1'", -# "set interfaces bonding bond1 mtu '1200'", -# "set interfaces vti vti2", -# "set interfaces vti vti2 description 'VTI - 2'", -# "set interfaces vti vti2 disable" -# ] -# -# "after": [ -# { -# "description": "Bond - 1", -# "enabled": true, -# "mtu": 1200, -# "name": "bond1" -# }, -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "description": "VTI - 2", -# "enabled": false, -# "name": "vti2" -# }, -# { -# "description": "Configured by Ansible", -# "enabled": true, -# "mtu": 1500, -# "name": "eth3" -# }, -# { -# "description": "Configured by Ansible", -# "enabled": true, -# "name": "eth2", -# "vifs": [ -# { -# "description": "VIF 200 - ETH2", -# "enabled": true, -# "vlan_id": "200" -# } -# ] -# }, -# { -# "enabled": true, -# "name": "eth1" -# }, -# { -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# -# ------------- + +# Task Output +# ----------- +# before: +# - enabled: true +# name: lo +# - enabled: true +# name: eth3 +# - enabled: true +# name: eth2 +# - enabled: true +# name: eth1 +# - duplex: auto +# enabled: true +# name: eth0 +# speed: auto +# commands: +# - set interfaces ethernet eth2 description 'Configured by Ansible' +# - set interfaces ethernet eth2 vif 200 +# - set interfaces ethernet eth2 vif 200 description 'VIF 200 - ETH2' +# - set interfaces ethernet eth3 description 'Configured by Ansible' +# - set interfaces ethernet eth3 mtu '1500' +# - set interfaces bonding bond1 +# - set interfaces bonding bond1 description 'Bond - 1' +# - set interfaces bonding bond1 mtu '1200' +# - set interfaces vti vti2 +# - set interfaces vti vti2 description 'VTI - 2' +# - set interfaces vti vti2 disable +# after: +# - description: Bond - 1 +# enabled: true +# mtu: 1200 +# name: bond1 +# - enabled: true +# name: lo +# - description: VTI - 2 +# enabled: false +# name: vti2 +# - description: Configured by Ansible +# enabled: true +# mtu: 1500 +# name: eth3 +# - description: Configured by Ansible +# enabled: true +# name: eth2 +# vifs: +# - description: VIF 200 - ETH2 +# enabled: true +# vlan_id: '200' +# - enabled: true +# name: eth1 +# - duplex: auto +# enabled: true +# name: eth0 +# speed: auto + # After state: -# ------------- -# +# ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1200' @@ -303,15 +262,11 @@ EXAMPLES = """ # set interfaces loopback lo # set interfaces vti vti2 description 'VTI - 2' # set interfaces vti vti2 disable -# # Using replaced -# -# ------------- # Before state: # ------------- -# # vyos:~$ show configuration commands | grep eth # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' @@ -340,137 +295,93 @@ EXAMPLES = """ # set interfaces ethernet eth3 smp_affinity 'auto' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo -# -# + - name: Replace device configurations of listed interfaces with provided configurations vyos.vyos.vyos_interfaces: config: - name: eth2 description: Replaced by Ansible - - name: eth3 description: Replaced by Ansible - - name: eth1 description: Replaced by Ansible state: replaced -# -# -# ----------------------- -# Module Execution Result -# ----------------------- -# -# "before": [ -# { -# "description": "Bond - 1", -# "enabled": true, -# "mtu": 1400, -# "name": "bond1" -# }, -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "description": "Configured by Ansible", -# "duplex": "full", -# "enabled": true, -# "mtu": 1500, -# "name": "eth3", -# "speed": "100" -# }, -# { -# "description": "Configured by Ansible", -# "duplex": "full", -# "enabled": true, -# "mtu": 500, -# "name": "eth2", -# "speed": "100", -# "vifs": [ -# { -# "description": "VIF 200 - ETH2", -# "enabled": true, -# "vlan_id": "200" -# } -# ] -# }, -# { -# "description": "Configured by Ansible Eng Team", -# "duplex": "full", -# "enabled": true, -# "name": "eth1", -# "speed": "100" -# }, -# { -# "description": "Management Interface for the Appliance", -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# "commands": [ -# "delete interfaces ethernet eth2 speed", -# "delete interfaces ethernet eth2 duplex", -# "delete interfaces ethernet eth2 mtu", -# "delete interfaces ethernet eth2 vif 200 description", -# "set interfaces ethernet eth2 description 'Replaced by Ansible'", -# "delete interfaces ethernet eth3 speed", -# "delete interfaces ethernet eth3 duplex", -# "delete interfaces ethernet eth3 mtu", -# "set interfaces ethernet eth3 description 'Replaced by Ansible'", -# "delete interfaces ethernet eth1 speed", -# "delete interfaces ethernet eth1 duplex", -# "set interfaces ethernet eth1 description 'Replaced by Ansible'" -# ] -# -# "after": [ -# { -# "description": "Bond - 1", -# "enabled": true, -# "mtu": 1400, -# "name": "bond1" -# }, -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "description": "Replaced by Ansible", -# "enabled": true, -# "name": "eth3" -# }, -# { -# "description": "Replaced by Ansible", -# "enabled": true, -# "name": "eth2", -# "vifs": [ -# { -# "enabled": true, -# "vlan_id": "200" -# } -# ] -# }, -# { -# "description": "Replaced by Ansible", -# "enabled": true, -# "name": "eth1" -# }, -# { -# "description": "Management Interface for the Appliance", -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# -# ------------- + +# Task Output +# ----------- +# before: +# - description: Bond - 1 +# enabled: true +# mtu: 1400 +# name: bond1 +# - enabled: true +# name: lo +# - description: Configured by Ansible +# duplex: full +# enabled: true +# mtu: 1500 +# name: eth3 +# speed: '100' +# - description: Configured by Ansible +# duplex: full +# enabled: true +# mtu: 500 +# name: eth2 +# speed: '100' +# vifs: +# - description: VIF 200 - ETH2 +# enabled: true +# vlan_id: '200' +# - description: Configured by Ansible Eng Team +# duplex: full +# enabled: true +# name: eth1 +# speed: '100' +# - description: Management Interface for the Appliance +# duplex: auto +# enabled: true +# name: eth0 +# speed: auto +# commands: +# - delete interfaces ethernet eth2 speed +# - delete interfaces ethernet eth2 duplex +# - delete interfaces ethernet eth2 mtu +# - delete interfaces ethernet eth2 vif 200 description +# - set interfaces ethernet eth2 description 'Replaced by Ansible' +# - delete interfaces ethernet eth3 speed +# - delete interfaces ethernet eth3 duplex +# - delete interfaces ethernet eth3 mtu +# - set interfaces ethernet eth3 description 'Replaced by Ansible' +# - delete interfaces ethernet eth1 speed +# - delete interfaces ethernet eth1 duplex +# - set interfaces ethernet eth1 description 'Replaced by Ansible' +# after: +# - description: Bond - 1 +# enabled: true +# mtu: 1400 +# name: bond1 +# - enabled: true +# name: lo +# - description: Replaced by Ansible +# enabled: true +# name: eth3 +# - description: Replaced by Ansible +# enabled: true +# name: eth2 +# vifs: +# - enabled: true +# vlan_id: '200' +# - description: Replaced by Ansible +# enabled: true +# name: eth1 +# - description: Management Interface for the Appliance +# duplex: auto +# enabled: true +# name: eth0 +# speed: auto + # After state: -# ------------- -# +# ------------ # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond1 description 'Bond - 1' # set interfaces bonding bond1 mtu '1400' @@ -491,15 +402,12 @@ EXAMPLES = """ # set interfaces ethernet eth3 description 'Replaced by Ansible' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo -# -# + + # Using overridden -# -# -# -------------- -# Before state -# -------------- -# + +# Before state: +# ------------- # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' @@ -525,8 +433,7 @@ EXAMPLES = """ # set interfaces loopback lo # set interfaces vti vti1 description 'Virtual Tunnel Interface - 1' # set interfaces vti vti1 mtu '68' -# -# + - name: Overrides all device configuration with provided configuration vyos.vyos.vyos_interfaces: config: @@ -534,127 +441,84 @@ EXAMPLES = """ description: Outbound Interface For The Appliance speed: auto duplex: auto - - name: eth2 speed: auto duplex: auto - - name: eth3 mtu: 1200 state: overridden -# -# -# ------------------------ -# Module Execution Result -# ------------------------ -# -# "before": [ -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "description": "Virtual Tunnel Interface - 1", -# "enabled": true, -# "mtu": 68, -# "name": "vti1" -# }, -# { -# "description": "Configured by Ansible Network", -# "enabled": true, -# "name": "eth3" -# }, -# { -# "description": "Configured by Ansible Team (Admin Down)", -# "enabled": false, -# "mtu": 600, -# "name": "eth2" -# }, -# { -# "description": "Configured by Ansible Eng Team", -# "enabled": true, -# "mtu": 100, -# "name": "eth1", -# "vifs": [ -# { -# "description": "VIF 100 - ETH1", -# "enabled": false, -# "vlan_id": "100" -# } -# ] -# }, -# { -# "description": "Ethernet Interface - 0", -# "duplex": "auto", -# "enabled": true, -# "mtu": 1200, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# "commands": [ -# "delete interfaces vti vti1 description", -# "delete interfaces vti vti1 mtu", -# "delete interfaces ethernet eth1 description", -# "delete interfaces ethernet eth1 mtu", -# "delete interfaces ethernet eth1 vif 100 description", -# "delete interfaces ethernet eth1 vif 100 disable", -# "delete interfaces ethernet eth0 mtu", -# "set interfaces ethernet eth0 description 'Outbound Interface For The Appliance'", -# "delete interfaces ethernet eth2 description", -# "delete interfaces ethernet eth2 mtu", -# "set interfaces ethernet eth2 duplex 'auto'", -# "delete interfaces ethernet eth2 disable", -# "set interfaces ethernet eth2 speed 'auto'", -# "delete interfaces ethernet eth3 description", -# "set interfaces ethernet eth3 mtu '1200'" -# ], -# -# "after": [ -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "enabled": true, -# "name": "vti1" -# }, -# { -# "enabled": true, -# "mtu": 1200, -# "name": "eth3" -# }, -# { -# "duplex": "auto", -# "enabled": true, -# "name": "eth2", -# "speed": "auto" -# }, -# { -# "enabled": true, -# "name": "eth1", -# "vifs": [ -# { -# "enabled": true, -# "vlan_id": "100" -# } -# ] -# }, -# { -# "description": "Outbound Interface For The Appliance", -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# -# ------------ -# After state + +# Task Output +# ----------- +# before: +# - enabled: true +# name: lo +# - description: Virtual Tunnel Interface - 1 +# enabled: true +# mtu: 68 +# name: vti1 +# - description: Configured by Ansible Network +# enabled: true +# name: eth3 +# - description: Configured by Ansible Team (Admin Down) +# enabled: false +# mtu: 600 +# name: eth2 +# - description: Configured by Ansible Eng Team +# enabled: true +# mtu: 100 +# name: eth1 +# vifs: +# - description: VIF 100 - ETH1 +# enabled: false +# vlan_id: '100' +# - description: Ethernet Interface - 0 +# duplex: auto +# enabled: true +# mtu: 1200 +# name: eth0 +# speed: auto +# commands: +# - delete interfaces vti vti1 description +# - delete interfaces vti vti1 mtu +# - delete interfaces ethernet eth1 description +# - delete interfaces ethernet eth1 mtu +# - delete interfaces ethernet eth1 vif 100 description +# - delete interfaces ethernet eth1 vif 100 disable +# - delete interfaces ethernet eth0 mtu +# - set interfaces ethernet eth0 description 'Outbound Interface For The Appliance' +# - delete interfaces ethernet eth2 description +# - delete interfaces ethernet eth2 mtu +# - set interfaces ethernet eth2 duplex 'auto' +# - delete interfaces ethernet eth2 disable +# - set interfaces ethernet eth2 speed 'auto' +# - delete interfaces ethernet eth3 description +# - set interfaces ethernet eth3 mtu '1200' +# after: +# - enabled: true +# name: lo +# - enabled: true +# name: vti1 +# - enabled: true +# mtu: 1200 +# name: eth3 +# - duplex: auto +# enabled: true +# name: eth2 +# speed: auto +# - enabled: true +# name: eth1 +# vifs: +# - enabled: true +# vlan_id: '100' +# - description: Outbound Interface For The Appliance +# duplex: auto +# enabled: true +# name: eth0 +# speed: auto + +# After state: # ------------ -# # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 address 'dhcpv6' @@ -674,15 +538,12 @@ EXAMPLES = """ # set interfaces ethernet eth3 mtu '1200' # set interfaces loopback lo # set interfaces vti vti1 -# -# + + # Using deleted -# -# -# ------------- -# Before state + +# Before state: # ------------- -# # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 description 'LAG - 1' @@ -710,130 +571,87 @@ EXAMPLES = """ # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces ethernet eth3 speed '100' # set interfaces loopback lo -# -# + - name: Delete attributes of given interfaces (Note - This won't delete the interfaces themselves) vyos.vyos.vyos_interfaces: config: - name: bond1 - - name: eth1 - - name: eth2 - - name: eth3 state: deleted -# -# -# ------------------------ -# Module Execution Results -# ------------------------ -# -# "before": [ -# { -# "enabled": true, -# "mtu": 1300, -# "name": "bond0" -# }, -# { -# "description": "LAG - 1", -# "enabled": true, -# "name": "bond1" -# }, -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "description": "Configured by Ansible Network", -# "duplex": "full", -# "enabled": true, -# "name": "eth3", -# "speed": "100" -# }, -# { -# "description": "Configured by Ansible", -# "duplex": "full", -# "enabled": false, -# "mtu": 600, -# "name": "eth2", -# "speed": "100" -# }, -# { -# "description": "Configured by Ansible Network", -# "duplex": "full", -# "enabled": true, -# "name": "eth1", -# "speed": "100" -# }, -# { -# "description": "Outbound Interface for this appliance", -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# "commands": [ -# "delete interfaces bonding bond1 description", -# "delete interfaces ethernet eth1 speed", -# "delete interfaces ethernet eth1 duplex", -# "delete interfaces ethernet eth1 description", -# "delete interfaces ethernet eth2 speed", -# "delete interfaces ethernet eth2 disable", -# "delete interfaces ethernet eth2 duplex", -# "delete interfaces ethernet eth2 disable", -# "delete interfaces ethernet eth2 description", -# "delete interfaces ethernet eth2 disable", -# "delete interfaces ethernet eth2 mtu", -# "delete interfaces ethernet eth2 disable", -# "delete interfaces ethernet eth3 speed", -# "delete interfaces ethernet eth3 duplex", -# "delete interfaces ethernet eth3 description" -# ] -# -# "after": [ -# { -# "enabled": true, -# "mtu": 1300, -# "name": "bond0" -# }, -# { -# "enabled": true, -# "name": "bond1" -# }, -# { -# "enabled": true, -# "name": "lo" -# }, -# { -# "enabled": true, -# "name": "eth3" -# }, -# { -# "enabled": true, -# "name": "eth2" -# }, -# { -# "enabled": true, -# "name": "eth1" -# }, -# { -# "description": "Outbound Interface for this appliance", -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# -# ------------ -# After state + +# Task Output +# ----------- +# before: +# - enabled: true +# mtu: 1300 +# name: bond0 +# - description: LAG - 1 +# enabled: true +# name: bond1 +# - enabled: true +# name: lo +# - description: Configured by Ansible Network +# duplex: full +# enabled: true +# name: eth3 +# speed: '100' +# - description: Configured by Ansible +# duplex: full +# enabled: false +# mtu: 600 +# name: eth2 +# speed: '100' +# - description: Configured by Ansible Network +# duplex: full +# enabled: true +# name: eth1 +# speed: '100' +# - description: Outbound Interface for this appliance +# duplex: auto +# enabled: true +# name: eth0 +# speed: auto +# commands: +# - delete interfaces bonding bond1 description +# - delete interfaces ethernet eth1 speed +# - delete interfaces ethernet eth1 duplex +# - delete interfaces ethernet eth1 description +# - delete interfaces ethernet eth2 speed +# - delete interfaces ethernet eth2 disable +# - delete interfaces ethernet eth2 duplex +# - delete interfaces ethernet eth2 disable +# - delete interfaces ethernet eth2 description +# - delete interfaces ethernet eth2 disable +# - delete interfaces ethernet eth2 mtu +# - delete interfaces ethernet eth2 disable +# - delete interfaces ethernet eth3 speed +# - delete interfaces ethernet eth3 duplex +# - delete interfaces ethernet eth3 description +# after: +# - enabled: true +# mtu: 1300 +# name: bond0 +# - enabled: true +# name: bond1 +# - enabled: true +# name: lo +# - enabled: true +# name: eth3 +# - enabled: true +# name: eth2 +# - enabled: true +# name: eth1 +# - description: Outbound Interface for this appliance +# duplex: auto +# enabled: true +# name: eth0 +# speed: auto + +# After state: # ------------ -# # vyos@vyos:~$ show configuration commands | grep interfaces # set interfaces bonding bond0 mtu '1300' # set interfaces bonding bond1 @@ -850,15 +668,12 @@ EXAMPLES = """ # set interfaces ethernet eth2 smp-affinity 'auto' # set interfaces ethernet eth3 hw-id '08:00:27:43:70:8c' # set interfaces loopback lo -# -# # Using gathered -# + # Before state: # ------------- -# # vyos@192# run show configuration commands | grep interfaces # set interfaces ethernet eth0 address 'dhcp' # set interfaces ethernet eth0 duplex 'auto' @@ -880,76 +695,38 @@ EXAMPLES = """ vyos.vyos.vyos_interfaces: config: state: gathered -# -# -# ------------------------- -# Module Execution Result -# ------------------------- -# -# "gathered": [ -# { -# "description": "Configured by Ansible", -# "duplex": "auto", -# "enabled": true, -# "mtu": 1500, -# "name": "eth2", -# "speed": "auto", -# "vifs": [ -# { -# "description": "VIF - 200", -# "enabled": true, -# "vlan_id": 200 -# } -# ] -# }, -# { -# "description": "Configured by Ansible", -# "duplex": "auto", -# "enabled": true, -# "mtu": 1500, -# "name": "eth1", -# "speed": "auto", -# "vifs": [ -# { -# "description": "VIF - 200", -# "enabled": true, -# "vlan_id": 200 -# } -# ] -# }, -# { -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] -# -# -# After state: -# ------------- -# -# vyos@192# run show configuration commands | grep interfaces -# set interfaces ethernet eth0 address 'dhcp' -# set interfaces ethernet eth0 duplex 'auto' -# set interfaces ethernet eth0 hw-id '08:00:27:50:5e:19' -# set interfaces ethernet eth0 smp_affinity 'auto' -# set interfaces ethernet eth0 speed 'auto' -# set interfaces ethernet eth1 description 'Configured by Ansible' -# set interfaces ethernet eth1 duplex 'auto' -# set interfaces ethernet eth1 mtu '1500' -# set interfaces ethernet eth1 speed 'auto' -# set interfaces ethernet eth1 vif 200 description 'VIF - 200' -# set interfaces ethernet eth2 description 'Configured by Ansible' -# set interfaces ethernet eth2 duplex 'auto' -# set interfaces ethernet eth2 mtu '1500' -# set interfaces ethernet eth2 speed 'auto' -# set interfaces ethernet eth2 vif 200 description 'VIF - 200' + +# Task output +# ----------- +# gathered: +# - description: Configured by Ansible +# duplex: auto +# enabled: true +# mtu: 1500 +# name: eth2 +# speed: auto +# vifs: +# - description: VIF - 200 +# enabled: true +# vlan_id: 200 +# - description: Configured by Ansible +# duplex: auto +# enabled: true +# mtu: 1500 +# name: eth1 +# speed: auto +# vifs: +# - description: VIF - 200 +# enabled: true +# vlan_id: 200 +# - duplex: auto +# enabled: true +# name: eth0 +# speed: auto # Using rendered -# -# + - name: Render the commands for provided configuration vyos.vyos.vyos_interfaces: config: @@ -976,34 +753,29 @@ EXAMPLES = """ mtu: 600 enabled: false state: rendered -# -# -# ------------------------- -# Module Execution Result -# ------------------------- -# -# -# "rendered": [ -# "set interfaces ethernet eth0 duplex 'auto'", -# "set interfaces ethernet eth0 speed 'auto'", -# "delete interfaces ethernet eth0 disable", -# "set interfaces ethernet eth1 duplex 'auto'", -# "delete interfaces ethernet eth1 disable", -# "set interfaces ethernet eth1 speed 'auto'", -# "set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1'", -# "set interfaces ethernet eth1 mtu '1500'", -# "set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100'", -# "set interfaces ethernet eth1 vif 100 mtu '400'", -# "set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101'", -# "set interfaces ethernet eth2 disable", -# "set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN DOWN)'", -# "set interfaces ethernet eth2 mtu '600'" -# ] + +# Task Output +# ----------- +# rendered: +# - set interfaces ethernet eth0 duplex 'auto' +# - set interfaces ethernet eth0 speed 'auto' +# - delete interfaces ethernet eth0 disable +# - set interfaces ethernet eth1 duplex 'auto' +# - delete interfaces ethernet eth1 disable +# - set interfaces ethernet eth1 speed 'auto' +# - set interfaces ethernet eth1 description 'Configured by Ansible - Interface 1' +# - set interfaces ethernet eth1 mtu '1500' +# - set interfaces ethernet eth1 vif 100 description 'Eth1 - VIF 100' +# - set interfaces ethernet eth1 vif 100 mtu '400' +# - set interfaces ethernet eth1 vif 101 description 'Eth1 - VIF 101' +# - set interfaces ethernet eth2 disable +# - set interfaces ethernet eth2 description 'Configured by Ansible - Interface 2 (ADMIN +# DOWN)' +# - set interfaces ethernet eth2 mtu '600' # Using parsed -# -# + - name: Parse the configuration. vyos.vyos.vyos_interfaces: running_config: @@ -1023,54 +795,36 @@ EXAMPLES = """ set interfaces ethernet eth2 speed 'auto' set interfaces ethernet eth2 vif 200 description 'VIF - 200'" state: parsed -# -# -# ------------------------- -# Module Execution Result -# ------------------------- -# -# -# "parsed": [ -# { -# "description": "Configured by Ansible", -# "duplex": "auto", -# "enabled": true, -# "mtu": 1500, -# "name": "eth2", -# "speed": "auto", -# "vifs": [ -# { -# "description": "VIF - 200", -# "enabled": true, -# "vlan_id": 200 -# } -# ] -# }, -# { -# "description": "Configured by Ansible", -# "duplex": "auto", -# "enabled": true, -# "mtu": 1500, -# "name": "eth1", -# "speed": "auto", -# "vifs": [ -# { -# "description": "VIF - 200", -# "enabled": true, -# "vlan_id": 200 -# } -# ] -# }, -# { -# "duplex": "auto", -# "enabled": true, -# "name": "eth0", -# "speed": "auto" -# } -# ] - +# Task output +# ----------- +# parsed: +# - description: Configured by Ansible +# duplex: auto +# enabled: true +# mtu: 1500 +# name: eth2 +# speed: auto +# vifs: +# - description: VIF - 200 +# enabled: true +# vlan_id: 200 +# - description: Configured by Ansible +# duplex: auto +# enabled: true +# mtu: 1500 +# name: eth1 +# speed: auto +# vifs: +# - description: VIF - 200 +# enabled: true +# vlan_id: 200 +# - duplex: auto +# enabled: true +# name: eth0 +# speed: auto """ + RETURN = """ before: description: The configuration as structured data prior to module invocation. |