Adding live-initramfs 1.87.2-1.

25 files changed, 0 insertions, 1135 deletions

diff --git a/scripts/casper-bottom/01integrity_check b/scripts/casper-bottom/01integrity_check
deleted file mode 100755
index 637a1ff..0000000
--- a/scripts/casper-bottom/01integrity_check
+++ /dev/null
@@ -1,18 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-grep integrity-check /proc/cmdline && casper-md5check /cdrom /cdrom/md5sum.txt < /dev/tty8
diff --git a/scripts/casper-bottom/02_timezone b/scripts/casper-bottom/02_timezone
deleted file mode 100755
index 1cb6402..0000000
--- a/scripts/casper-bottom/02_timezone
+++ /dev/null
@@ -1,21 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Adding APT-CDROM source..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-cp -f /root/usr/share/zoneinfo/UTC /root/etc/localtime
diff --git a/scripts/casper-bottom/05mountpoints b/scripts/casper-bottom/05mountpoints
deleted file mode 100755
index 7c61de3..0000000
--- a/scripts/casper-bottom/05mountpoints
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Moving mount points..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-# Move to the new root filesystem so that programs there can get at it.
-mkdir -p /root/cdrom
-mount -n -o move /cdrom /root/cdrom
-
-log_end_msg
diff --git a/scripts/casper-bottom/10adduser b/scripts/casper-bottom/10adduser
deleted file mode 100755
index 4fe9378..0000000
--- a/scripts/casper-bottom/10adduser
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Adding live session user..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-# U6aMy0wojraho is just a blank password
-chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF
-set passwd/root-password-crypted *
-set passwd/user-password-crypted U6aMy0wojraho
-set passwd/user-fullname $USERFULLNAME 
-set passwd/username $USERNAME
-set passwd/user-uid 999
-EOF
-
-chroot /root /usr/lib/user-setup/user-setup-apply > /dev/null
-
-# Clear out debconf database again to avoid confusing ubiquity later.
-chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF
-set passwd/root-password-crypted
-set passwd/user-password-crypted
-set passwd/user-fullname
-set passwd/username
-set passwd/user-uid
-EOF
-
-if [ -f /root/etc/sudoers ]; then
-    if [ "${BUILD_SYSTEM}" = "Ubuntu" ]; then
-        grep -q '^%admin' /root/etc/sudoers && sed -i -e '/^%admin/s/ALL$/NOPASSWD: ALL/' /root/etc/sudoers || echo '%admin  ALL=(ALL) NOPASSWD: ALL' >> /root/etc/sudoers
-    elif [ "${BUILD_SYSTEM}" = "Debian" ]; then
-		echo "${USERNAME}  ALL=(ALL) NOPASSWD: ALL" >> /root/etc/sudoers
-    fi
-fi
-
-# XXX - awful hack to stop xscreensaver locking the screen (#7150)
-echo 'RUNNING_UNDER_GDM="yes"' >> /root/etc/environment
-
-for file in /usr/share/applications/ubiquity-gtkui.desktop /usr/share/applications/kde/ubiquity-kdeui.desktop; do
-    if [ -f "/root/$file" ]; then
-        chroot /root install -D -o $USERNAME -g $USERNAME $file /home/$USERNAME/Desktop/$(basename "$file")
-        break
-    fi
-done
-
-if [ -L /root/home/$USERNAME/Examples ]; then
-    chroot /root install -o $USERNAME -g $USERNAME -d /home/$USERNAME/Desktop/
-    mv /root/home/$USERNAME/Examples /root/home/$USERNAME/Desktop/
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/12fstab b/scripts/casper-bottom/12fstab
deleted file mode 100755
index 616216a..0000000
--- a/scripts/casper-bottom/12fstab
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring fstab..."
-FSTAB=/root/etc/fstab
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-cat > $FSTAB <<EOF
-unionfs / unionfs rw 0 0
-tmpfs /tmp tmpfs nosuid,nodev 0 0
-EOF
-
-rm -f /root/etc/rcS.d/S*checkroot.sh
-
-log_end_msg
diff --git a/scripts/casper-bottom/13swap b/scripts/casper-bottom/13swap
deleted file mode 100755
index 9c5d0c9..0000000
--- a/scripts/casper-bottom/13swap
+++ /dev/null
@@ -1,44 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting up swap..."
-FSTAB=/root/etc/fstab
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-devices=""
-for device in /dev/[hs]d[a-z][0-9]*; do
-    if ! [ -b "$device" ]; then
-        continue
-    fi
-
-    magic=$(/bin/dd if="$device" bs=4086 skip=1 count=1 2>/dev/null | /bin/dd bs=10 count=1 2>/dev/null) || continue
-    
-    if [ "$magic" = "SWAPSPACE2" -o "$magic" = "SWAP-SPACE" ]; then
-#        log "Found $device"
-        devices="$devices $device"
-        fi
-done
-
-for device in $devices; do
-    cat >> $FSTAB <<EOF
-$device swap swap defaults 0 0
-EOF
-done
-
-log_end_msg
diff --git a/scripts/casper-bottom/14locales b/scripts/casper-bottom/14locales
deleted file mode 100755
index 3ee3ef0..0000000
--- a/scripts/casper-bottom/14locales
+++ /dev/null
@@ -1,63 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting up locales..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if [ -e /root/etc/default/locale ]; then
-    grep_file=/root/etc/default/locale
-elif [ -e /root/etc/environment ]; then # Old locales policy
-    grep_file=/root/etc/environment
-fi
-
-if [ -n "${grep_file}" ]; then
-    # use rootfs configured locale
-    locale=$(grep -s 'LANG=' ${grep_file} | sed s/'LANG='// | tr -d '"' )
-else
-    grep_file=/root/etc/default/locale
-fi
-
-# commandline
-for x in $(cat /proc/cmdline); do
-    case $x in
-        debian-installer/locale=*)
-			locale=${x#debian-installer/locale=}
-			set_locale="true"
-			;;
-		locale=*)
-			locale=${x#locale=}
-			set_locale="true"
-            ;;
-    esac
-done
-
-if [ -z "${locale}" ]; then
-    # Set a default one
-    locale=en_US.UTF-8
-    set_locale="true"
-fi
-
-if [ "${set_locale}" ]; then
-    LANG=$(grep "^${locale}" /root/usr/share/i18n/SUPPORTED | grep UTF-8 |sed -e 's, .*,,' -e q)
-    printf 'LANG="%s"\n' "${LANG}" >> "${grep_file}"
-    printf '%s UTF-8\n' "${LANG}" > /root/etc/locale.gen
-    chroot /root /usr/sbin/locale-gen "${LANG}"
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/15autologin b/scripts/casper-bottom/15autologin
deleted file mode 100755
index 81bd3a4..0000000
--- a/scripts/casper-bottom/15autologin
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting up automatic login..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if chroot /root [ -f /etc/gdm/gdm-cdd.conf ]; then
-    GDMCONF=/etc/gdm/gdm-cdd.conf
-else
-    GDMCONF=/etc/gdm/gdm.conf
-fi
-
-if chroot /root [ -f ${GDMCONF} ]; then
-    # Configure GDM autologin
-    chroot /root sed -i \
-        -e "s/^AutomaticLoginEnable=.*\$/AutomaticLoginEnable=true/" \
-        -e "s/^AutomaticLogin=.*\$/AutomaticLogin=$USERNAME/" \
-        -e "s/^TimedLoginEnable=.*\$/TimedLoginEnable=true/" \
-        -e "s/^TimedLogin=.*\$/TimedLogin=$USERNAME/" \
-        -e "s/^TimedLoginDelay=.*\$/TimedLoginDelay=10/" \
-        ${GDMCONF}
-fi
-
-if [ -f /root/etc/kde3/kdm/kdmrc ]; then
-    # Configure KDM autologin
-    sed -i -r \
-        -e "s/^#?AutoLoginEnable=.*\$/AutoLoginEnable=true/" \
-        -e "s/^#?AutoLoginUser=.*\$/AutoLoginUser=$USERNAME/" \
-        -e "s/^#?AutoReLogin=.*\$/AutoReLogin=true/" \
-        /root/etc/kde3/kdm/kdmrc
-fi
-
-if chroot /root /usr/bin/which kpersonalizer >/dev/null; then
-    # Disable first-login wizard for KDE
-    if [ ! -f /root/etc/kde3/kpersonalizerrc ]; then
-        cat > /root/etc/kde3/kpersonalizerrc <<EOF
-[General]
-FirstLogin=false
-EOF
-    else
-        echo "I'm not smart enough to disable kpersonalizer startup" >&2
-        echo "Because kpersonalizerrc already exists" >&2
-    fi
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/18hostname b/scripts/casper-bottom/18hostname
deleted file mode 100755
index 19ac61f..0000000
--- a/scripts/casper-bottom/18hostname
+++ /dev/null
@@ -1,38 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting hostname..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-echo "$HOST" > /root/etc/hostname
-cat > /root/etc/hosts <<EOF
-127.0.0.1 localhost
-127.0.1.1 $HOST
-
-# The following lines are desirable for IPv6 capable hosts
-::1     ip6-localhost ip6-loopback
-fe00::0 ip6-localnet
-ff00::0 ip6-mcastprefix
-ff02::1 ip6-allnodes
-ff02::2 ip6-allrouters
-ff02::3 ip6-allhosts
-
-EOF
-
-log_end_msg
diff --git a/scripts/casper-bottom/19keyboard b/scripts/casper-bottom/19keyboard
deleted file mode 100755
index ef90115..0000000
--- a/scripts/casper-bottom/19keyboard
+++ /dev/null
@@ -1,70 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting up console keyboard..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-kbd=us
-cslayout=
-csvariant=
-csmodel=
-
-for x in $(cat /proc/cmdline); do
-        case $x in
-                kbd-chooser/method=*)
-                        kbd=${x#kbd-chooser/method=}
-                        ;;
-                console-setup/layoutcode=*)
-                        cslayout=${x#console-setup/layoutcode=}
-                        ;;
-                console-setup/variantcode=*)
-                        csvariant=${x#console-setup/variantcode=}
-                        ;;
-                console-setup/modelcode=*)
-                        csmodel=${x#console-setup/modelcode=}
-                        ;;
-        esac
-done
-
-if [ -x /root/bin/setupcon ] && [ -f /root/etc/default/console-setup ]; then
-        if [ "$cslayout" ]; then
-                chroot /root sed -i "s/^XKBLAYOUT=.*/XKBLAYOUT=\"$cslayout\"/" \
-                        /etc/default/console-setup
-                if [ "$csvariant" ]; then
-                        chroot /root sed -i "s/^XKBVARIANT=.*/XKBVARIANT=\"$csvariant\"/" \
-                                /etc/default/console-setup
-                else
-                        casper-preseed /root console-setup/variantcode '' false
-                fi
-                if [ "$csmodel" ]; then
-                        chroot /root sed -i "s/^XKBMODEL=.*/XKBMODEL=\"$csmodel\"/" \
-                                /etc/default/console-setup
-                else
-                        casper-preseed /root console-setup/modelcode '' false
-                fi
-        else
-                casper-preseed /root console-setup/layoutcode '' false
-                casper-preseed /root console-setup/variantcode '' false
-                casper-preseed /root console-setup/modelcode '' false
-        fi
-else
-        chroot /root /usr/sbin/install-keymap $kbd
-        casper-preseed /root debian-installer/keymap "$kbd"
-fi
-log_end_msg
diff --git a/scripts/casper-bottom/20xconfig b/scripts/casper-bottom/20xconfig
deleted file mode 100755
index c5563ed..0000000
--- a/scripts/casper-bottom/20xconfig
+++ /dev/null
@@ -1,61 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring X..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if [ "$TERM_TYPE" = "serial" ]; then
-    # Don't bother trying to configure or start X on a serial console
-    rm -f /etc/rc?.d/S??[gxk]dm
-    exit 0
-fi
-
-locale=en_US.UTF-8
-
-for x in $(cat /proc/cmdline); do
-                case $x in
-                        debian-installer/locale=*)
-                                locale=${x#debian-installer/locale=}
-                                ;;
-                        locale=*)
-                                locale=${x#locale=}
-                                ;;
-                esac
-done
-
-mount -n -o bind /sys /root/sys
-mount -n -o bind /proc /root/proc
-mount -n -o bind /dev /root/dev
-
-if [ -n "${XDEBCONF}" -a -x /root/usr/sbin/xdebconfigurator ]; then
-    # xdebconfigurator
-    chroot /root /usr/sbin/xdebconfigurator
-fi
-
-chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF
-set xserver-xorg/autodetect_keyboard true
-fset xserver-xorg/autodetect_keyboard seen true
-EOF
-
-DEBUG_XORG_PACKAGE=1 DEBUG_XORG_DEBCONF=1 LANG=$(grep "^${locale}" /root/usr/share/i18n/SUPPORTED | grep UTF-8 | sed -e 's, .*,,' -e q) casper-reconfigure /root xserver-xorg
-umount /root/sys
-umount /root/proc
-umount /root/dev
-
-log_end_msg
diff --git a/scripts/casper-bottom/22gnome_panel_data b/scripts/casper-bottom/22gnome_panel_data
deleted file mode 100755
index 4dd5d9d..0000000
--- a/scripts/casper-bottom/22gnome_panel_data
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring gnome-panel-data..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if [ -x /root/usr/sbin/laptop-detect ]; then
-	if chroot /root laptop-detect; then
-	    casper-reconfigure /root gnome-panel-data
-	fi
-fi
-
-panel_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-panel-data 2>/dev/null) || panel_version=""
-if [ -n "$panel_version" ]; then
-    chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/panel/global/disable_lock_screen true
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/22screensaver b/scripts/casper-bottom/22screensaver
deleted file mode 100755
index 39c0f22..0000000
--- a/scripts/casper-bottom/22screensaver
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring screensaver..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-gnome_screensaver_version=$(chroot /root dpkg-query -W --showformat='${Version}' gnome-screensaver 2>/dev/null) || gnome_screensaver_version=""
-if [ -n "$gnome_screensaver_version" ]; then
-    # Support legacy gconf value
-    chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/gnome-screensaver/lock false
-    chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/gnome-screensaver/lock_enabled false
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/23etc_modules b/scripts/casper-bottom/23etc_modules
deleted file mode 100755
index 754a832..0000000
--- a/scripts/casper-bottom/23etc_modules
+++ /dev/null
@@ -1,30 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Preconfiguring /etc/modules..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-case "$DPKG_ARCH" in
-# load the right modules
-powerpc|ppc64)
-        echo snd_powermac >> /root/etc/modules
-	;;
-esac
-
-log_end_msg
diff --git a/scripts/casper-bottom/23networking b/scripts/casper-bottom/23networking
deleted file mode 100755
index 1b732d3..0000000
--- a/scripts/casper-bottom/23networking
+++ /dev/null
@@ -1,107 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Preconfiguring networking..."
-IFFILE="/root/etc/network/interfaces"
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if [ "${STATICIP}" = "frommedia" -a -e  "$IFFILE" ] ; then
-    # will use existent /etc/network/interfaces
-    log_end_msg
-    exit 0
-fi
-
-cat > "$IFFILE" <<EOF
-auto lo
-iface lo inet loopback
-
-EOF
-
-udevtrigger
-udevsettle
-
-if [ -z "${NETBOOT}" -a -n "${STATICIP}" -a "${STATICIP}" != "frommedia" ]; then
-    parsed=$(echo "${STATICIP}" | sed -e 's/:/ /g')
-    for ifline in ${parsed}; do
-        ifname="$(echo ${ifline} | cut -f1 -d ',')"
-        ifaddress="$(echo ${ifline} | cut -f2 -d ',')"
-        ifnetmask="$(echo ${ifline} | cut -f3 -d ',')"
-        ifgateway="$(echo ${ifline} | cut -f4 -d ',')"
-        cat >> "$IFFILE" <<EOF
-auto ${ifname}
-iface ${ifname} inet static
-    address ${ifaddress}
-    netmask ${ifnetmask}
-    gateway ${ifgateway}
-
-EOF
-    done
-else
-    if [ -z "${NETBOOT}" ]; then
-        # default, dhcp assigned
-        method="dhcp"
-    else
-        # make sure that the preconfigured interface would not get reassigned by dhcp
-        # on startup by ifup script - otherwise our root fs might be disconnected!
-        method="manual"
-    fi
-    # iterate the physical interfaces and add them to the interfaces list
-    for interface in /sys/class/net/eth* /sys/class/net/ath* /sys/class/net/wlan*; do
-        [ -e $interface ] || continue
-        i="$(basename $interface)"
-        cat >> "$IFFILE" <<EOF
-auto $i
-iface $i inet $method
-
-EOF
-    done
-    if [ ! -f /root/etc/resolv.conf -a -f /netboot.config ] ; then
-        # create a resolv.conf if it is not present
-        cp /netboot.config /root/var/log/netboot.config
-        rc_search=$(cat netboot.config | awk '/domain/{print $3}')
-        rc_server0=$(cat netboot.config | awk '/dns0/{print $5}')
-        rc_server1=$(cat netboot.config | awk '/dns0/{print $8}')
-        rc_server0="nameserver ${rc_server0}"
-        if [ "${rc_server1}" = "0.0.0.0" ]; then
-            rc_server1=""
-        else
-            rc_server1="nameserver ${rc_server1}"
-        fi
-        cat > /root/etc/resolv.conf <<EOF
-# /etc/resolv.conf
-# Autogenerated by casper
-search ${rc_search}
-domain ${rc_search}
-${rc_server0}
-${rc_server1}
-EOF
-        cat /root/etc/resolv.conf >> /root/var/log/netboot.config
-    fi
-fi
-
-for i in eth0 eth1 eth2 ath0 wlan0; do
-    grep -q "iface $i" $IFFILE && continue
-    cat >> "$IFFILE" <<EOF
-auto $i
-iface $i inet dhcp
-
-EOF
-done
-
-log_end_msg
diff --git a/scripts/casper-bottom/24preseed b/scripts/casper-bottom/24preseed
deleted file mode 100755
index cd52467..0000000
--- a/scripts/casper-bottom/24preseed
+++ /dev/null
@@ -1,50 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Loading preseed file..."
-
-. /scripts/casper-functions
-
-prereqs ()
-{
-	echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-	prereqs
-	exit 0
-	;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-location=
-for x in $(cat /proc/cmdline); do
-	case $x in
-		preseed/file=*)
-			location="${x#preseed/file=}"
-			;;
-		file=*)
-			location="${x#file=}"
-			;;
-		*/*=*)
-			question="${x%%=*}"
-			value="${x#*=}"
-			casper-preseed /root "$question" "$value"
-			;;
-		locale=*)
-			value="${x#*=}"
-			casper-preseed /root debian-installer/locale "$value"
-			;;
-	esac
-done
-
-if [ "$location" ]; then
-	chroot /root debconf-set-selections < "/root$location"
-fi
-
-log_end_msg
-
-exit 0
diff --git a/scripts/casper-bottom/25configure_init b/scripts/casper-bottom/25configure_init
deleted file mode 100755
index f9a8626..0000000
--- a/scripts/casper-bottom/25configure_init
+++ /dev/null
@@ -1,58 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Setting up init..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-# Arrange for shells on virtual consoles, rather than login prompts
-
-if [ -n "$USERNAME" ]; then
-    if [ -f /root/etc/inittab ]; then
-        sed -i -e "s|^\([^:]*:[^:]*:[^:]*\):.*getty.*\<\(tty[0-9]*\).*$|\1:/bin/login -f $USERNAME </dev/\2 >/dev/\2 2>\&1|" /root/etc/inittab
-    fi
-    if [ "/root/etc/event.d/tty*" != "$(echo /root/etc/event.d/tty*)" ]; then
-        for f in /root/etc/event.d/tty*; do
-            sed -i -e "s|^exec.*|exec /bin/login -f $USERNAME </dev/$(basename $f) > /dev/$(basename $f) 2>\&1|" $f
-        done
-    fi
-fi
-
-# This has the nice side effect of the cron.{daily,weekly,monthly} jobs in
-# /etc/crontab remaining disabled, yet also not run by anacron
-if [ -x /root/etc/init.d/anacron ]; then
-    for f in /root/etc/rc?.d/S??anacron; do
-        mv ${f} ${f%/*}/K00anacron
-    done
-fi
-
-# No point, really
-rm -f /root/etc/rc?.d/[SK]??postfix
-
-# Avoid clobbering the user's clock
-rm -f /root/etc/rc?.d/K??hwclock.sh
-
-# Disable readahead since it doesn't play well with squashfs + unionfs
-# use chmod instead of mv to not trigger unionfs bugs.
-if [ -e /root/sbin/readahead-list ]; then
-    chmod -x /root/sbin/readahead-list
-fi
-
-log_end_msg
-
-exit 0
diff --git a/scripts/casper-bottom/30accessibility b/scripts/casper-bottom/30accessibility
deleted file mode 100755
index 01c2386..0000000
--- a/scripts/casper-bottom/30accessibility
+++ /dev/null
@@ -1,106 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring accessibility options..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-gconf_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gconf2 2>/dev/null) || gconf_version=""
-
-gct() {
-    if [ "$gconf_version" ]; then
-        chroot /root sudo -u "$USERNAME" gconftool-2 "$@"
-    fi
-}
-
-kderc_addtoprefixes() {
-    if [ -e "/root/etc/kderc" ]; then
-        sed -i "s|\\(prefixes=/usr/share/kubuntu-default-settings/kde-profile/default/\\)|\\1,$1|" /root/etc/kderc
-    fi
-}
-
-for x in $(cat /proc/cmdline); do
-                case $x in
-                        # Lesser Visual Impairment
-                        access=v1)
-                        gct -s -t string /desktop/gnome/interface/gtk_theme HighContrastLargePrint
-                        gct -s -t string /desktop/gnome/interface/icon_theme HighContrast
-                        gct -s -t string /desktop/gnome/interface/monospace_font_name "monospace 18"
-                        gct -s -t string /desktop/gnome/interface/font_name "sans 18"
-                        gct -s -t string /apps/metacity/general/theme Atlanta
-                        gct -s -t string /desktop/gnome/background/picture_filename ""
-                        gct -s -t string /desktop/gnome/background/picture_options none
-                        gct -s -t string /desktop/gnome/background/primary_color \#666666
-                        gct -s -t string /desktop/gnome/background/secondary_color \#7F7F7F
-                        gct -s -t string /desktop/gnome/background/color_shading_type solid
-                        gct -s -t int /desktop/gnome/peripherals/mouse/cursor_size 48
-                        gct -s -t string /desktop/gnome/peripherals/mouse/cursor_theme whiteglass
-
-                        kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/lesser-visual-impairment/
-                        if [ -d /root/usr/share/xubuntu-default-settings/accessibility ]; then
-                            cp -a /root/usr/share/xubuntu-default-settings/accessibility/* /root/etc/xdg/
-                        fi
-                        ;;
-                        # Moderate Visual Impairment
-                        access=v2)
-                        gct -s -t bool /desktop/gnome/interface/accessibility true
-                        gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [orca]
-                        if [ -e /root/usr/share/pycentral/gnome-orca/site-packages/orca/settings.py ]; then
-                            sed -i '/^enableSpeech\W/ s/True/False/;/^enableMagnifier/ s/False/True/' /root/usr/share/pycentral/gnome-orca/site-packages/orca/settings.py
-                        fi
-                        kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/lesser-visual-impairment/,/usr/share/kubuntu-default-settings/kde-profile/moderate-visual-impairment/
-                        ;;
-                        # Blindness
-                        access=v3)
-                        gct -s -t bool /desktop/gnome/sound/enable_esd false
-                        gct -s -t bool /desktop/gnome/interface/accessibility true
-                        gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [orca]
-                        ;;
-                        # Minor Motor Difficulties
-                        access=m1)
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/mousekeys_enable true
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep true
-                        gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false
-                        gct -s -t bool /desktop/gnome/peripherals/keyboard/repeat true
-                        gct -s -t int /desktop/gnome/peripherals/keyboard/delay 700
-                        gct -s -t int /desktop/gnome/peripherals/keyboard/rate 10
-
-                        kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/minor-motor-difficulties/
-                        if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]; then
-                            sed -i 's/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml
-                        fi 
-                        ;;
-                        # Motor Difficulties - pointing devices
-                        access=m2)
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true
-			gct -s -t bool /desktop/gnome/interface/accessibility true
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true
-                        gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep false
-                        gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false
-                        gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [onboard]
-
-                        kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/minor-motor-difficulties/,/usr/share/kubuntu-default-settings/kde-profile/motor-difficulties-pointing-devices/
-                        if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]; then
-                            sed -i '/Sticky/ s/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml
-                        fi 
-                        ;;
-		esac
-done
-log_end_msg
diff --git a/scripts/casper-bottom/31disable_update_notifier b/scripts/casper-bottom/31disable_update_notifier
deleted file mode 100755
index 2461c25..0000000
--- a/scripts/casper-bottom/31disable_update_notifier
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Disabling update-notifier..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-# For GNOME, we divert away apt-check to avoid a regular 'apt-get update'
-# equivalent in the live session. We want to run update-notifier for crash
-# report handling.
-chroot /root dpkg-divert --add --rename --quiet \
-	/usr/lib/update-notifier/apt-check
-ln -s /bin/true /root/usr/lib/update-notifier/apt-check
-
-# For KDE, adept_notifier's only useful function at the moment is an
-# 'apt-get update' equivalent, so we disable it entirely.
-rm -f /root/usr/share/autostart/adept_notifier_auto.desktop
-
-log_end_msg
diff --git a/scripts/casper-bottom/32disable_hibernation b/scripts/casper-bottom/32disable_hibernation
deleted file mode 100755
index ae4badd..0000000
--- a/scripts/casper-bottom/32disable_hibernation
+++ /dev/null
@@ -1,36 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Configuring power management..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-
-gpm_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-power-manager 2>/dev/null) || panel_version=""
-if [ -n "$gpm_version" ]; then
-#    casper-reconfigure /root gnome-power-manager
-    chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/gnome-power-manager/can_hibernate false
-    chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/gnome-power-manager/can_suspend false
-fi
-
-if [ -d /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config ]; then
-    echo "disableSuspend=1" >> /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config/power-managerrc
-    echo "disableHibernate=1" >> /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config/power-managerrc
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/33enable_apport_crashes b/scripts/casper-bottom/33enable_apport_crashes
deleted file mode 100755
index d1c8829..0000000
--- a/scripts/casper-bottom/33enable_apport_crashes
+++ /dev/null
@@ -1,28 +0,0 @@
-#!/bin/sh
-
-PREREQ=""
-DESCRIPTION="Enabling notifications about program crashes..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-update_notifier_version=$(chroot /root dpkg-query -W --showformat='${Version}' update-notifier 2>/dev/null) || update_notifier_version=""
-if [ -n "$update_notifier_version" ]; then
-    chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/update-notifier/show_apport_crashes true
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/34disable_kwallet b/scripts/casper-bottom/34disable_kwallet
deleted file mode 100755
index add7cca..0000000
--- a/scripts/casper-bottom/34disable_kwallet
+++ /dev/null
@@ -1,25 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Disabling kwallet..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-rm -f /root/usr/share/services/kded/kwalletd.desktop
-
-log_end_msg
\ No newline at end of file
diff --git a/scripts/casper-bottom/35fix_language_selector b/scripts/casper-bottom/35fix_language_selector
deleted file mode 100755
index 3a22602..0000000
--- a/scripts/casper-bottom/35fix_language_selector
+++ /dev/null
@@ -1,32 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Fixing language selector..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-log_begin_msg "$DESCRIPTION"
-
-if [ -e /root/usr/share/applications/language-selector.desktop ]; then
-    sed -i '/^Exec/ s|/usr/bin/gnome-language-selector|"& -n"|' /root/usr/share/applications/language-selector.desktop
-
-fi
-
-if [ -x /root/usr/bin/fontconfig-voodoo ]; then
-    chroot /root fontconfig-voodoo --auto --quiet || true
-fi
-
-log_end_msg
diff --git a/scripts/casper-bottom/40install_driver_updates b/scripts/casper-bottom/40install_driver_updates
deleted file mode 100755
index 272a0ed..0000000
--- a/scripts/casper-bottom/40install_driver_updates
+++ /dev/null
@@ -1,40 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Installing driver updates..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-if [ ! -d /tmp/driver-updates ]; then
-	exit 0
-fi
-
-log_begin_msg "$DESCRIPTION"
-
-install_dir=/var/cache/driver-updates
-
-mkdir "/root$install_dir"
-cp -a /tmp/driver-updates/*.deb "/root$install_dir/"
-
-# We cannot leave packages in a bad state. So if the install fails, remove
-# it. This will get caught in casper.log.
-for deb in "/root$install_dir"/*; do
-	if ! chroot /root dpkg -i "$install_dir/$deb"; then
-		chroot /root dpkg -P "${deb%%_*}"
-	fi
-done
-
-log_end_msg
diff --git a/scripts/casper-bottom/41apt_cdrom b/scripts/casper-bottom/41apt_cdrom
deleted file mode 100755
index b4ab643..0000000
--- a/scripts/casper-bottom/41apt_cdrom
+++ /dev/null
@@ -1,24 +0,0 @@
-#! /bin/sh
-
-PREREQ=""
-DESCRIPTION="Adding APT-CDROM source..."
-
-. /scripts/casper-functions
-
-prereqs()
-{
-       echo "$PREREQ"
-}
-
-case $1 in
-# get pre-requisites
-prereqs)
-       prereqs
-       exit 0
-       ;;
-esac
-
-mkdir -p /root/cdrom
-mount -n -o bind /cdrom /root/cdrom
-chroot /root apt-cdrom -m add
-umount /root/cdrom