diff options
Diffstat (limited to 'scripts/casper-bottom')
25 files changed, 0 insertions, 1135 deletions
diff --git a/scripts/casper-bottom/01integrity_check b/scripts/casper-bottom/01integrity_check deleted file mode 100755 index 637a1ff..0000000 --- a/scripts/casper-bottom/01integrity_check +++ /dev/null @@ -1,18 +0,0 @@ -#!/bin/sh - -PREREQ="" - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -grep integrity-check /proc/cmdline && casper-md5check /cdrom /cdrom/md5sum.txt < /dev/tty8 diff --git a/scripts/casper-bottom/02_timezone b/scripts/casper-bottom/02_timezone deleted file mode 100755 index 1cb6402..0000000 --- a/scripts/casper-bottom/02_timezone +++ /dev/null @@ -1,21 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Adding APT-CDROM source..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -cp -f /root/usr/share/zoneinfo/UTC /root/etc/localtime diff --git a/scripts/casper-bottom/05mountpoints b/scripts/casper-bottom/05mountpoints deleted file mode 100755 index 7c61de3..0000000 --- a/scripts/casper-bottom/05mountpoints +++ /dev/null @@ -1,27 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Moving mount points..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -# Move to the new root filesystem so that programs there can get at it. -mkdir -p /root/cdrom -mount -n -o move /cdrom /root/cdrom - -log_end_msg diff --git a/scripts/casper-bottom/10adduser b/scripts/casper-bottom/10adduser deleted file mode 100755 index 4fe9378..0000000 --- a/scripts/casper-bottom/10adduser +++ /dev/null @@ -1,66 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Adding live session user..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -# U6aMy0wojraho is just a blank password -chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF -set passwd/root-password-crypted * -set passwd/user-password-crypted U6aMy0wojraho -set passwd/user-fullname $USERFULLNAME -set passwd/username $USERNAME -set passwd/user-uid 999 -EOF - -chroot /root /usr/lib/user-setup/user-setup-apply > /dev/null - -# Clear out debconf database again to avoid confusing ubiquity later. -chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF -set passwd/root-password-crypted -set passwd/user-password-crypted -set passwd/user-fullname -set passwd/username -set passwd/user-uid -EOF - -if [ -f /root/etc/sudoers ]; then - if [ "${BUILD_SYSTEM}" = "Ubuntu" ]; then - grep -q '^%admin' /root/etc/sudoers && sed -i -e '/^%admin/s/ALL$/NOPASSWD: ALL/' /root/etc/sudoers || echo '%admin ALL=(ALL) NOPASSWD: ALL' >> /root/etc/sudoers - elif [ "${BUILD_SYSTEM}" = "Debian" ]; then - echo "${USERNAME} ALL=(ALL) NOPASSWD: ALL" >> /root/etc/sudoers - fi -fi - -# XXX - awful hack to stop xscreensaver locking the screen (#7150) -echo 'RUNNING_UNDER_GDM="yes"' >> /root/etc/environment - -for file in /usr/share/applications/ubiquity-gtkui.desktop /usr/share/applications/kde/ubiquity-kdeui.desktop; do - if [ -f "/root/$file" ]; then - chroot /root install -D -o $USERNAME -g $USERNAME $file /home/$USERNAME/Desktop/$(basename "$file") - break - fi -done - -if [ -L /root/home/$USERNAME/Examples ]; then - chroot /root install -o $USERNAME -g $USERNAME -d /home/$USERNAME/Desktop/ - mv /root/home/$USERNAME/Examples /root/home/$USERNAME/Desktop/ -fi - -log_end_msg diff --git a/scripts/casper-bottom/12fstab b/scripts/casper-bottom/12fstab deleted file mode 100755 index 616216a..0000000 --- a/scripts/casper-bottom/12fstab +++ /dev/null @@ -1,31 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring fstab..." -FSTAB=/root/etc/fstab - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -cat > $FSTAB <<EOF -unionfs / unionfs rw 0 0 -tmpfs /tmp tmpfs nosuid,nodev 0 0 -EOF - -rm -f /root/etc/rcS.d/S*checkroot.sh - -log_end_msg diff --git a/scripts/casper-bottom/13swap b/scripts/casper-bottom/13swap deleted file mode 100755 index 9c5d0c9..0000000 --- a/scripts/casper-bottom/13swap +++ /dev/null @@ -1,44 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Setting up swap..." -FSTAB=/root/etc/fstab - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -devices="" -for device in /dev/[hs]d[a-z][0-9]*; do - if ! [ -b "$device" ]; then - continue - fi - - magic=$(/bin/dd if="$device" bs=4086 skip=1 count=1 2>/dev/null | /bin/dd bs=10 count=1 2>/dev/null) || continue - - if [ "$magic" = "SWAPSPACE2" -o "$magic" = "SWAP-SPACE" ]; then -# log "Found $device" - devices="$devices $device" - fi -done - -for device in $devices; do - cat >> $FSTAB <<EOF -$device swap swap defaults 0 0 -EOF -done - -log_end_msg diff --git a/scripts/casper-bottom/14locales b/scripts/casper-bottom/14locales deleted file mode 100755 index 3ee3ef0..0000000 --- a/scripts/casper-bottom/14locales +++ /dev/null @@ -1,63 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Setting up locales..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if [ -e /root/etc/default/locale ]; then - grep_file=/root/etc/default/locale -elif [ -e /root/etc/environment ]; then # Old locales policy - grep_file=/root/etc/environment -fi - -if [ -n "${grep_file}" ]; then - # use rootfs configured locale - locale=$(grep -s 'LANG=' ${grep_file} | sed s/'LANG='// | tr -d '"' ) -else - grep_file=/root/etc/default/locale -fi - -# commandline -for x in $(cat /proc/cmdline); do - case $x in - debian-installer/locale=*) - locale=${x#debian-installer/locale=} - set_locale="true" - ;; - locale=*) - locale=${x#locale=} - set_locale="true" - ;; - esac -done - -if [ -z "${locale}" ]; then - # Set a default one - locale=en_US.UTF-8 - set_locale="true" -fi - -if [ "${set_locale}" ]; then - LANG=$(grep "^${locale}" /root/usr/share/i18n/SUPPORTED | grep UTF-8 |sed -e 's, .*,,' -e q) - printf 'LANG="%s"\n' "${LANG}" >> "${grep_file}" - printf '%s UTF-8\n' "${LANG}" > /root/etc/locale.gen - chroot /root /usr/sbin/locale-gen "${LANG}" -fi - -log_end_msg diff --git a/scripts/casper-bottom/15autologin b/scripts/casper-bottom/15autologin deleted file mode 100755 index 81bd3a4..0000000 --- a/scripts/casper-bottom/15autologin +++ /dev/null @@ -1,62 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Setting up automatic login..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if chroot /root [ -f /etc/gdm/gdm-cdd.conf ]; then - GDMCONF=/etc/gdm/gdm-cdd.conf -else - GDMCONF=/etc/gdm/gdm.conf -fi - -if chroot /root [ -f ${GDMCONF} ]; then - # Configure GDM autologin - chroot /root sed -i \ - -e "s/^AutomaticLoginEnable=.*\$/AutomaticLoginEnable=true/" \ - -e "s/^AutomaticLogin=.*\$/AutomaticLogin=$USERNAME/" \ - -e "s/^TimedLoginEnable=.*\$/TimedLoginEnable=true/" \ - -e "s/^TimedLogin=.*\$/TimedLogin=$USERNAME/" \ - -e "s/^TimedLoginDelay=.*\$/TimedLoginDelay=10/" \ - ${GDMCONF} -fi - -if [ -f /root/etc/kde3/kdm/kdmrc ]; then - # Configure KDM autologin - sed -i -r \ - -e "s/^#?AutoLoginEnable=.*\$/AutoLoginEnable=true/" \ - -e "s/^#?AutoLoginUser=.*\$/AutoLoginUser=$USERNAME/" \ - -e "s/^#?AutoReLogin=.*\$/AutoReLogin=true/" \ - /root/etc/kde3/kdm/kdmrc -fi - -if chroot /root /usr/bin/which kpersonalizer >/dev/null; then - # Disable first-login wizard for KDE - if [ ! -f /root/etc/kde3/kpersonalizerrc ]; then - cat > /root/etc/kde3/kpersonalizerrc <<EOF -[General] -FirstLogin=false -EOF - else - echo "I'm not smart enough to disable kpersonalizer startup" >&2 - echo "Because kpersonalizerrc already exists" >&2 - fi -fi - -log_end_msg diff --git a/scripts/casper-bottom/18hostname b/scripts/casper-bottom/18hostname deleted file mode 100755 index 19ac61f..0000000 --- a/scripts/casper-bottom/18hostname +++ /dev/null @@ -1,38 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Setting hostname..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -echo "$HOST" > /root/etc/hostname -cat > /root/etc/hosts <<EOF -127.0.0.1 localhost -127.0.1.1 $HOST - -# The following lines are desirable for IPv6 capable hosts -::1 ip6-localhost ip6-loopback -fe00::0 ip6-localnet -ff00::0 ip6-mcastprefix -ff02::1 ip6-allnodes -ff02::2 ip6-allrouters -ff02::3 ip6-allhosts - -EOF - -log_end_msg diff --git a/scripts/casper-bottom/19keyboard b/scripts/casper-bottom/19keyboard deleted file mode 100755 index ef90115..0000000 --- a/scripts/casper-bottom/19keyboard +++ /dev/null @@ -1,70 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Setting up console keyboard..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -kbd=us -cslayout= -csvariant= -csmodel= - -for x in $(cat /proc/cmdline); do - case $x in - kbd-chooser/method=*) - kbd=${x#kbd-chooser/method=} - ;; - console-setup/layoutcode=*) - cslayout=${x#console-setup/layoutcode=} - ;; - console-setup/variantcode=*) - csvariant=${x#console-setup/variantcode=} - ;; - console-setup/modelcode=*) - csmodel=${x#console-setup/modelcode=} - ;; - esac -done - -if [ -x /root/bin/setupcon ] && [ -f /root/etc/default/console-setup ]; then - if [ "$cslayout" ]; then - chroot /root sed -i "s/^XKBLAYOUT=.*/XKBLAYOUT=\"$cslayout\"/" \ - /etc/default/console-setup - if [ "$csvariant" ]; then - chroot /root sed -i "s/^XKBVARIANT=.*/XKBVARIANT=\"$csvariant\"/" \ - /etc/default/console-setup - else - casper-preseed /root console-setup/variantcode '' false - fi - if [ "$csmodel" ]; then - chroot /root sed -i "s/^XKBMODEL=.*/XKBMODEL=\"$csmodel\"/" \ - /etc/default/console-setup - else - casper-preseed /root console-setup/modelcode '' false - fi - else - casper-preseed /root console-setup/layoutcode '' false - casper-preseed /root console-setup/variantcode '' false - casper-preseed /root console-setup/modelcode '' false - fi -else - chroot /root /usr/sbin/install-keymap $kbd - casper-preseed /root debian-installer/keymap "$kbd" -fi -log_end_msg diff --git a/scripts/casper-bottom/20xconfig b/scripts/casper-bottom/20xconfig deleted file mode 100755 index c5563ed..0000000 --- a/scripts/casper-bottom/20xconfig +++ /dev/null @@ -1,61 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring X..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if [ "$TERM_TYPE" = "serial" ]; then - # Don't bother trying to configure or start X on a serial console - rm -f /etc/rc?.d/S??[gxk]dm - exit 0 -fi - -locale=en_US.UTF-8 - -for x in $(cat /proc/cmdline); do - case $x in - debian-installer/locale=*) - locale=${x#debian-installer/locale=} - ;; - locale=*) - locale=${x#locale=} - ;; - esac -done - -mount -n -o bind /sys /root/sys -mount -n -o bind /proc /root/proc -mount -n -o bind /dev /root/dev - -if [ -n "${XDEBCONF}" -a -x /root/usr/sbin/xdebconfigurator ]; then - # xdebconfigurator - chroot /root /usr/sbin/xdebconfigurator -fi - -chroot /root debconf-communicate -fnoninteractive casper > /dev/null <<EOF -set xserver-xorg/autodetect_keyboard true -fset xserver-xorg/autodetect_keyboard seen true -EOF - -DEBUG_XORG_PACKAGE=1 DEBUG_XORG_DEBCONF=1 LANG=$(grep "^${locale}" /root/usr/share/i18n/SUPPORTED | grep UTF-8 | sed -e 's, .*,,' -e q) casper-reconfigure /root xserver-xorg -umount /root/sys -umount /root/proc -umount /root/dev - -log_end_msg diff --git a/scripts/casper-bottom/22gnome_panel_data b/scripts/casper-bottom/22gnome_panel_data deleted file mode 100755 index 4dd5d9d..0000000 --- a/scripts/casper-bottom/22gnome_panel_data +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring gnome-panel-data..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if [ -x /root/usr/sbin/laptop-detect ]; then - if chroot /root laptop-detect; then - casper-reconfigure /root gnome-panel-data - fi -fi - -panel_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-panel-data 2>/dev/null) || panel_version="" -if [ -n "$panel_version" ]; then - chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/panel/global/disable_lock_screen true -fi - -log_end_msg diff --git a/scripts/casper-bottom/22screensaver b/scripts/casper-bottom/22screensaver deleted file mode 100755 index 39c0f22..0000000 --- a/scripts/casper-bottom/22screensaver +++ /dev/null @@ -1,30 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring screensaver..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -gnome_screensaver_version=$(chroot /root dpkg-query -W --showformat='${Version}' gnome-screensaver 2>/dev/null) || gnome_screensaver_version="" -if [ -n "$gnome_screensaver_version" ]; then - # Support legacy gconf value - chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/gnome-screensaver/lock false - chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/gnome-screensaver/lock_enabled false -fi - -log_end_msg diff --git a/scripts/casper-bottom/23etc_modules b/scripts/casper-bottom/23etc_modules deleted file mode 100755 index 754a832..0000000 --- a/scripts/casper-bottom/23etc_modules +++ /dev/null @@ -1,30 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Preconfiguring /etc/modules..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -case "$DPKG_ARCH" in -# load the right modules -powerpc|ppc64) - echo snd_powermac >> /root/etc/modules - ;; -esac - -log_end_msg diff --git a/scripts/casper-bottom/23networking b/scripts/casper-bottom/23networking deleted file mode 100755 index 1b732d3..0000000 --- a/scripts/casper-bottom/23networking +++ /dev/null @@ -1,107 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Preconfiguring networking..." -IFFILE="/root/etc/network/interfaces" - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if [ "${STATICIP}" = "frommedia" -a -e "$IFFILE" ] ; then - # will use existent /etc/network/interfaces - log_end_msg - exit 0 -fi - -cat > "$IFFILE" <<EOF -auto lo -iface lo inet loopback - -EOF - -udevtrigger -udevsettle - -if [ -z "${NETBOOT}" -a -n "${STATICIP}" -a "${STATICIP}" != "frommedia" ]; then - parsed=$(echo "${STATICIP}" | sed -e 's/:/ /g') - for ifline in ${parsed}; do - ifname="$(echo ${ifline} | cut -f1 -d ',')" - ifaddress="$(echo ${ifline} | cut -f2 -d ',')" - ifnetmask="$(echo ${ifline} | cut -f3 -d ',')" - ifgateway="$(echo ${ifline} | cut -f4 -d ',')" - cat >> "$IFFILE" <<EOF -auto ${ifname} -iface ${ifname} inet static - address ${ifaddress} - netmask ${ifnetmask} - gateway ${ifgateway} - -EOF - done -else - if [ -z "${NETBOOT}" ]; then - # default, dhcp assigned - method="dhcp" - else - # make sure that the preconfigured interface would not get reassigned by dhcp - # on startup by ifup script - otherwise our root fs might be disconnected! - method="manual" - fi - # iterate the physical interfaces and add them to the interfaces list - for interface in /sys/class/net/eth* /sys/class/net/ath* /sys/class/net/wlan*; do - [ -e $interface ] || continue - i="$(basename $interface)" - cat >> "$IFFILE" <<EOF -auto $i -iface $i inet $method - -EOF - done - if [ ! -f /root/etc/resolv.conf -a -f /netboot.config ] ; then - # create a resolv.conf if it is not present - cp /netboot.config /root/var/log/netboot.config - rc_search=$(cat netboot.config | awk '/domain/{print $3}') - rc_server0=$(cat netboot.config | awk '/dns0/{print $5}') - rc_server1=$(cat netboot.config | awk '/dns0/{print $8}') - rc_server0="nameserver ${rc_server0}" - if [ "${rc_server1}" = "0.0.0.0" ]; then - rc_server1="" - else - rc_server1="nameserver ${rc_server1}" - fi - cat > /root/etc/resolv.conf <<EOF -# /etc/resolv.conf -# Autogenerated by casper -search ${rc_search} -domain ${rc_search} -${rc_server0} -${rc_server1} -EOF - cat /root/etc/resolv.conf >> /root/var/log/netboot.config - fi -fi - -for i in eth0 eth1 eth2 ath0 wlan0; do - grep -q "iface $i" $IFFILE && continue - cat >> "$IFFILE" <<EOF -auto $i -iface $i inet dhcp - -EOF -done - -log_end_msg diff --git a/scripts/casper-bottom/24preseed b/scripts/casper-bottom/24preseed deleted file mode 100755 index cd52467..0000000 --- a/scripts/casper-bottom/24preseed +++ /dev/null @@ -1,50 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Loading preseed file..." - -. /scripts/casper-functions - -prereqs () -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -location= -for x in $(cat /proc/cmdline); do - case $x in - preseed/file=*) - location="${x#preseed/file=}" - ;; - file=*) - location="${x#file=}" - ;; - */*=*) - question="${x%%=*}" - value="${x#*=}" - casper-preseed /root "$question" "$value" - ;; - locale=*) - value="${x#*=}" - casper-preseed /root debian-installer/locale "$value" - ;; - esac -done - -if [ "$location" ]; then - chroot /root debconf-set-selections < "/root$location" -fi - -log_end_msg - -exit 0 diff --git a/scripts/casper-bottom/25configure_init b/scripts/casper-bottom/25configure_init deleted file mode 100755 index f9a8626..0000000 --- a/scripts/casper-bottom/25configure_init +++ /dev/null @@ -1,58 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Setting up init..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -# Arrange for shells on virtual consoles, rather than login prompts - -if [ -n "$USERNAME" ]; then - if [ -f /root/etc/inittab ]; then - sed -i -e "s|^\([^:]*:[^:]*:[^:]*\):.*getty.*\<\(tty[0-9]*\).*$|\1:/bin/login -f $USERNAME </dev/\2 >/dev/\2 2>\&1|" /root/etc/inittab - fi - if [ "/root/etc/event.d/tty*" != "$(echo /root/etc/event.d/tty*)" ]; then - for f in /root/etc/event.d/tty*; do - sed -i -e "s|^exec.*|exec /bin/login -f $USERNAME </dev/$(basename $f) > /dev/$(basename $f) 2>\&1|" $f - done - fi -fi - -# This has the nice side effect of the cron.{daily,weekly,monthly} jobs in -# /etc/crontab remaining disabled, yet also not run by anacron -if [ -x /root/etc/init.d/anacron ]; then - for f in /root/etc/rc?.d/S??anacron; do - mv ${f} ${f%/*}/K00anacron - done -fi - -# No point, really -rm -f /root/etc/rc?.d/[SK]??postfix - -# Avoid clobbering the user's clock -rm -f /root/etc/rc?.d/K??hwclock.sh - -# Disable readahead since it doesn't play well with squashfs + unionfs -# use chmod instead of mv to not trigger unionfs bugs. -if [ -e /root/sbin/readahead-list ]; then - chmod -x /root/sbin/readahead-list -fi - -log_end_msg - -exit 0 diff --git a/scripts/casper-bottom/30accessibility b/scripts/casper-bottom/30accessibility deleted file mode 100755 index 01c2386..0000000 --- a/scripts/casper-bottom/30accessibility +++ /dev/null @@ -1,106 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring accessibility options..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -gconf_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gconf2 2>/dev/null) || gconf_version="" - -gct() { - if [ "$gconf_version" ]; then - chroot /root sudo -u "$USERNAME" gconftool-2 "$@" - fi -} - -kderc_addtoprefixes() { - if [ -e "/root/etc/kderc" ]; then - sed -i "s|\\(prefixes=/usr/share/kubuntu-default-settings/kde-profile/default/\\)|\\1,$1|" /root/etc/kderc - fi -} - -for x in $(cat /proc/cmdline); do - case $x in - # Lesser Visual Impairment - access=v1) - gct -s -t string /desktop/gnome/interface/gtk_theme HighContrastLargePrint - gct -s -t string /desktop/gnome/interface/icon_theme HighContrast - gct -s -t string /desktop/gnome/interface/monospace_font_name "monospace 18" - gct -s -t string /desktop/gnome/interface/font_name "sans 18" - gct -s -t string /apps/metacity/general/theme Atlanta - gct -s -t string /desktop/gnome/background/picture_filename "" - gct -s -t string /desktop/gnome/background/picture_options none - gct -s -t string /desktop/gnome/background/primary_color \#666666 - gct -s -t string /desktop/gnome/background/secondary_color \#7F7F7F - gct -s -t string /desktop/gnome/background/color_shading_type solid - gct -s -t int /desktop/gnome/peripherals/mouse/cursor_size 48 - gct -s -t string /desktop/gnome/peripherals/mouse/cursor_theme whiteglass - - kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/lesser-visual-impairment/ - if [ -d /root/usr/share/xubuntu-default-settings/accessibility ]; then - cp -a /root/usr/share/xubuntu-default-settings/accessibility/* /root/etc/xdg/ - fi - ;; - # Moderate Visual Impairment - access=v2) - gct -s -t bool /desktop/gnome/interface/accessibility true - gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [orca] - if [ -e /root/usr/share/pycentral/gnome-orca/site-packages/orca/settings.py ]; then - sed -i '/^enableSpeech\W/ s/True/False/;/^enableMagnifier/ s/False/True/' /root/usr/share/pycentral/gnome-orca/site-packages/orca/settings.py - fi - kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/lesser-visual-impairment/,/usr/share/kubuntu-default-settings/kde-profile/moderate-visual-impairment/ - ;; - # Blindness - access=v3) - gct -s -t bool /desktop/gnome/sound/enable_esd false - gct -s -t bool /desktop/gnome/interface/accessibility true - gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [orca] - ;; - # Minor Motor Difficulties - access=m1) - gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true - gct -s -t bool /desktop/gnome/accessibility/keyboard/mousekeys_enable true - gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true - gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep true - gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false - gct -s -t bool /desktop/gnome/peripherals/keyboard/repeat true - gct -s -t int /desktop/gnome/peripherals/keyboard/delay 700 - gct -s -t int /desktop/gnome/peripherals/keyboard/rate 10 - - kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/minor-motor-difficulties/ - if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]; then - sed -i 's/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml - fi - ;; - # Motor Difficulties - pointing devices - access=m2) - gct -s -t bool /desktop/gnome/accessibility/keyboard/enable true - gct -s -t bool /desktop/gnome/interface/accessibility true - gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_enable true - gct -s -t bool /desktop/gnome/accessibility/keyboard/stickykeys_modifier_beep false - gct -s -t bool /desktop/accessibility/gnome/keyboard/stickykeys_two_key_off false - gct -s -t list --list-type=string /desktop/gnome/accessibility/startup/exec_ats [onboard] - - kderc_addtoprefixes /usr/share/kubuntu-default-settings/kde-profile/minor-motor-difficulties/,/usr/share/kubuntu-default-settings/kde-profile/motor-difficulties-pointing-devices/ - if [ -e /root/etc/xdg/xfce4/mcs_settings/keyboard.xml ]; then - sed -i '/Sticky/ s/0/1/' /root/etc/xdg/xfce4/mcs_settings/keyboard.xml - fi - ;; - esac -done -log_end_msg diff --git a/scripts/casper-bottom/31disable_update_notifier b/scripts/casper-bottom/31disable_update_notifier deleted file mode 100755 index 2461c25..0000000 --- a/scripts/casper-bottom/31disable_update_notifier +++ /dev/null @@ -1,34 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Disabling update-notifier..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -# For GNOME, we divert away apt-check to avoid a regular 'apt-get update' -# equivalent in the live session. We want to run update-notifier for crash -# report handling. -chroot /root dpkg-divert --add --rename --quiet \ - /usr/lib/update-notifier/apt-check -ln -s /bin/true /root/usr/lib/update-notifier/apt-check - -# For KDE, adept_notifier's only useful function at the moment is an -# 'apt-get update' equivalent, so we disable it entirely. -rm -f /root/usr/share/autostart/adept_notifier_auto.desktop - -log_end_msg diff --git a/scripts/casper-bottom/32disable_hibernation b/scripts/casper-bottom/32disable_hibernation deleted file mode 100755 index ae4badd..0000000 --- a/scripts/casper-bottom/32disable_hibernation +++ /dev/null @@ -1,36 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Configuring power management..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - - -gpm_version=$(chroot /root /usr/bin/dpkg-query -W --showformat='${Version}' gnome-power-manager 2>/dev/null) || panel_version="" -if [ -n "$gpm_version" ]; then -# casper-reconfigure /root gnome-power-manager - chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/gnome-power-manager/can_hibernate false - chroot /root sudo -u "$USERNAME" gconftool-2 -s -t bool /apps/gnome-power-manager/can_suspend false -fi - -if [ -d /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config ]; then - echo "disableSuspend=1" >> /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config/power-managerrc - echo "disableHibernate=1" >> /root/usr/share/kubuntu-default-settings/kde-profile/default/share/config/power-managerrc -fi - -log_end_msg diff --git a/scripts/casper-bottom/33enable_apport_crashes b/scripts/casper-bottom/33enable_apport_crashes deleted file mode 100755 index d1c8829..0000000 --- a/scripts/casper-bottom/33enable_apport_crashes +++ /dev/null @@ -1,28 +0,0 @@ -#!/bin/sh - -PREREQ="" -DESCRIPTION="Enabling notifications about program crashes..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -update_notifier_version=$(chroot /root dpkg-query -W --showformat='${Version}' update-notifier 2>/dev/null) || update_notifier_version="" -if [ -n "$update_notifier_version" ]; then - chroot /root sudo -u "$USERNAME" gconftool-2 -t bool -s /apps/update-notifier/show_apport_crashes true -fi - -log_end_msg diff --git a/scripts/casper-bottom/34disable_kwallet b/scripts/casper-bottom/34disable_kwallet deleted file mode 100755 index add7cca..0000000 --- a/scripts/casper-bottom/34disable_kwallet +++ /dev/null @@ -1,25 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Disabling kwallet..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -rm -f /root/usr/share/services/kded/kwalletd.desktop - -log_end_msg
\ No newline at end of file diff --git a/scripts/casper-bottom/35fix_language_selector b/scripts/casper-bottom/35fix_language_selector deleted file mode 100755 index 3a22602..0000000 --- a/scripts/casper-bottom/35fix_language_selector +++ /dev/null @@ -1,32 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Fixing language selector..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -log_begin_msg "$DESCRIPTION" - -if [ -e /root/usr/share/applications/language-selector.desktop ]; then - sed -i '/^Exec/ s|/usr/bin/gnome-language-selector|"& -n"|' /root/usr/share/applications/language-selector.desktop - -fi - -if [ -x /root/usr/bin/fontconfig-voodoo ]; then - chroot /root fontconfig-voodoo --auto --quiet || true -fi - -log_end_msg diff --git a/scripts/casper-bottom/40install_driver_updates b/scripts/casper-bottom/40install_driver_updates deleted file mode 100755 index 272a0ed..0000000 --- a/scripts/casper-bottom/40install_driver_updates +++ /dev/null @@ -1,40 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Installing driver updates..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -if [ ! -d /tmp/driver-updates ]; then - exit 0 -fi - -log_begin_msg "$DESCRIPTION" - -install_dir=/var/cache/driver-updates - -mkdir "/root$install_dir" -cp -a /tmp/driver-updates/*.deb "/root$install_dir/" - -# We cannot leave packages in a bad state. So if the install fails, remove -# it. This will get caught in casper.log. -for deb in "/root$install_dir"/*; do - if ! chroot /root dpkg -i "$install_dir/$deb"; then - chroot /root dpkg -P "${deb%%_*}" - fi -done - -log_end_msg diff --git a/scripts/casper-bottom/41apt_cdrom b/scripts/casper-bottom/41apt_cdrom deleted file mode 100755 index b4ab643..0000000 --- a/scripts/casper-bottom/41apt_cdrom +++ /dev/null @@ -1,24 +0,0 @@ -#! /bin/sh - -PREREQ="" -DESCRIPTION="Adding APT-CDROM source..." - -. /scripts/casper-functions - -prereqs() -{ - echo "$PREREQ" -} - -case $1 in -# get pre-requisites -prereqs) - prereqs - exit 0 - ;; -esac - -mkdir -p /root/cdrom -mount -n -o bind /cdrom /root/cdrom -chroot /root apt-cdrom -m add -umount /root/cdrom |